JRE Installation failure

Hello everyone,
I tried to install JRE 1.4.2 on my Windows 2000 Pro computer. The installer reported:
"Java (TM) Update cannot retrieve version information from the targeted directory" throwing an Error 1722 afterwards. What could cause that error and what should I do in order to install JRE properly?
Thank you in advance,
Mike

i know this post is a month old, but just in case anyone is still getting the 1772 error.
Ive been trying for almost 2 days trying to get java installed...tried both the off and online (both connected to the net or unconnected as well ><) versions, hell, even tried older versions, different display drivers, different resolutions, different paths on c:, ive even tried different pc's on this network :S
anyways, i got the idea whilst reading the error message (again) to install it to a different partition/hdd and it worked :) - im not sure if the installer just didnt like my SATA drive or not, but it installed perfectly fine onto an older PATA drive, so its all working now :D
just thought id post in case someone else comes looking for the answer (well thats how i found the post anyways) good luck to anyone else with the problem, hope my solution works

Similar Messages

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

Adobe Camera Raw 6.7 Installation Failure

From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
Mike

Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Acrobat X pro installation failure

I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

JNLP does not trigger JRE installation

Hi
I want to launch my application with a minimum version of jre(i.e. 1.6.0_10). If on the system there is no jre installed
or jre installed on the system is older than 1.6.0_10, i want jnlp to trigger the installation of jre 1.6.0_25.
I tried following jnlp tags in my jnlp file:
<java version="1.6.0_10+" href="http://download.oracle.com/otn-pub/java/jdk/6u25-b06/jre-6u25-windows-i586.exe"/>
<j2se version="1.6.0_10+" href="http://download.oracle.com/otn-pub/java/jdk/6u25-b06/jre-6u25-windows-i586.exe"/>
None of the above tags trigger the installation of jre if on the system there is no jre installed
or installed jre is older than 1.6.0_10.
Any help would be great.
Thanks in advance.

Andrew Thompson wrote:
1) Why would you expect the JNLP to enforce _25+, when the JNLP specifies..
..<java version="1.6.0_10+" href="http://download.oracle.com/otn-pub/java/jdk/6u25-b06/jre-6u25-windows-i586.exe"/>
_10+?My application is certified with jre version 1.6.0_25, but it can run on any jre version greater than 1.6.0_10. If user has any jre greater than 1.6.0_10 version application will use that jre. But if user does not have minimal jre version (i.e. 1.6.0_10) then i want to trigger jre installation and install the certified jre version for application(i.e. 1.6.0_25).
2) Have you validated the JNLP file using JaNeLA?
3) How is the link to the JNLP embedded in the web page?To me JNLP looks fine as it works fine if the system has atleast minimal jre version (i.e. 1.6.0_10), but fails to download jre 1.6.0_25 if it does not have 1.6.0_10 or any greater jre installed.
The link "http://download.oracle.com/otn-pub/java/jdk/6u25-b06/jre-6u25-windows-i586.exe" is the download link for jre 1.6.0_25.

Using axbridge.dll without going through the JRE installation process

I've searched the web and this forum for this specific problem, and have found related items, but nothing that quite answers the question.
I have an application that uses the JRE's axbridge.dll to access a DLL created from a Java bean. I used the packager to create a DLL named MyBean.dll.
When I go through the full JRE install, everything works great. That is to say, when I execute Sun's JRE installation program and go through the normal install process, I can access the bean through MyBean.dll without any problems.
I am accessing MyBean.dll from a Visual Basic 6.0 application. Converting to VB .Net is NOT an option at this time. The VB app uses MyBean.dll for a critical part of the application.
It is my understanding that it is not strictly necessary to go through the full JRE installation process. Simply deploying the JRE by copying its directory (and all subdirectories) to your application's directory structure should be sufficient. This would be HIGHLY desirable for my application. In fact, if I can't do this, it may be a show-stopper.
When I install my application in this way (i.e, by simply copying the JRE instead of "installing" it) it doesn't work at all. I immediately get an error saying that the executable "has encountered a problem and needs to close. We are sorry for the inconvenience" and a dialog is displayed offering to send the problem information to Microsoft.
The details indicate clearly that the problem occurs in the axbridge.dll, version 1.4.2.60.
1. Any ideas on how to get the axbridge.dll to work without going through the full JRE install?
2. Are there any alternatives to using the axbridge.dll to get my VB app to be able to use the Java? Remember, it is VB that must call the Java, NOT the other way around.
3. Is JNI an alternative? If so, can I use JNI to get VB to use Java, or do I have to write the DLL's in C++?
Any help you can give would be VERY MUCH appreciated.

I'm also on a JRE installation problem with the bridge.
Here is a regmon extract on excel using a dll that uses a java-packaged dll from the bridge:
5229 5.69504923 EXCEL.EXE:2364 QueryValue HKCR\CLSID\{9DD49FCD-BB61-414E-88C8-E6F5B35AEDCB}\InprocServer32\(Default) SUCCESS "C:\win32app\Specific\jre1.5.0_05\bin\axbridge.dll" << The axbridge dll in a specific location
5271 5.70646800 EXCEL.EXE:2364 QueryValue HKLM\SOFTWARE\JavaSoft\Java Plug-in\1.5.0_05\JavaHome SUCCESS "C:\Program Files\Java\jre1.5.0_05" << an installed JRE 1.5.0
This is confirmed with process explorer : excel is using "C:\Program Files\Java\jre1.5.0_05\lib\rt.jar" and not "C:\win32app\Specific\jre1.5.0_05\lib\rt.jar"
In other word, the axbridge check for its installation location in the registry to know where to start.
Even if all your components have been updated in the registry as suggested here : http://forum.java.sun.com/thread.jspa?forumID=40&threadID=559704
JRE Bug or feature?
Anyway the registry is evil.

Why are all jar files not compressed in the JRE installer?

I used 7zip to unpack jre-6u12-windows-i586-p.exe (Oracle JRE Installer). On unpacking, I got a core.zip, a zipper.exe and a few other files.
Again on exploding core.zip I found a few things. core.zip contains all the jar files just like it would be after installation except for 7 jar files.
charsets.jar
deploy.jar
javaws.jar
jsse.jar
localedata.jar
plugin.jar
rt.jar
Instead of these jar files there exists the corresponding packfiles
charsets.pack
deploy.pack
javaws.pack
jsse.pack
localedata.pack
plugin.pack
rt.pack
I think these are files created by pack200.exe & unpack200.exe is run on them after installation to create the corresponding jar files.
So now I have a few questions
Why are only these 7 files run through pack200.exe. I assume its because they are bigger than other files. But it wouldn't take that much effort to pack all jar files & unpack them after installation.
The .pack extension suggests that these are packed but not gzipped. Again why would Oracle not do a gzip also? for eg with rt.jar packing reduces size from 45 MB to 12 MB, while adding gzip also reduces it to 6 MB.
Edited by: 966944 on Oct 22, 2012 8:19 AM

Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

Itune installation failure

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"

I went a step further than before and got itunes running again.
The Updater had also installed Quicktime.
I launched quicktime, it appeared to be configuring and then launched. Then when I run Itunes now it is working...
Hope this is your problem also.

Basic questions about JRE installation

I am using NSIS to make a installer, which insalls the JRE 1.5, JMF, Javamp3, then our own software packages.....
Firstly I have some basic question about the general installatio/deinstallation.
1 Why sometimes is it required to reboot computer for the installed software to take effect, e.g.
JRE 1.5. If not, what doest NOT take effect? (Actually in many cases, it seems to work even if not reboot the computer).
Regarding the JRE 1.5,
I am wondering:
1 where is the registry entry written in windows?
2 how to make the JRE installation process silent?
Thanks !

Just click on this link http://mindprod.com/jgloss/registry.html.

Problems with JRE installation 1.6.0_18 in silent mode

Hi!
I have problems with installing the JRE from the cmd line in silent mode and in a directory with spaces in the path.
If I remove the spaces in the INSTALLDIR, the JRE installs in the directory I have specified but not when I use spaces in the path.
The command I run is following:
jre-6u18-windows-i586.exe /s /v"/qn INSTALLDIR="C:\Program Files (x86)\company\product test\java\""
all I get is the help window to the windows installer with the different options. What am I missing?
BR,
/Peter

Hi
You should install this Patch:
Patch 13948973: JDEV 11.1.1.6.0 FREEZES IN CUSTOMIZATION MODE DUE TO DEADLOCK
After the installation the JDev works fine again.
Regards, David Perez

Adobe Player for Embedding installation failure

Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
Any suggestions on what I should try are welcome!
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
Win OS version: 6.1.0.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[    4956] Sun Nov 14 07:48:25 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
Action string for {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
[    4956] Sun Nov 14 07:48:26 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
[    5276] Sun Nov 14 07:48:26 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Command ARKPatchCommand failed.
[    5276] Sun Nov 14 07:48:26 2010 INFO
Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Error rolling back command ARKPatchCommand
[    4956] Sun Nov 14 07:48:27 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[    4956] Sun Nov 14 07:48:29 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[    4956] Sun Nov 14 07:48:29 2010 ERROR
The following payload errors were found during install:
- Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
[    4956] Sun Nov 14 07:48:29 2010 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: 6 Command ARKPatchCommand failed.
ERROR: 6 Error rolling back command ARKPatchCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

As an update to my previous post about the installation failure. I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
I solved the problem by:
1) Deactiviating CS5 Master Collection on my computer
2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
3) Downloading and running the Adobe CS5 Cleanup tool.
4) Reinstalling CS5 MC.
5) Downloading and installing all of the updates to bring the install up to date.
I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs...

Installation Error DW050: Adobe Illustrator CS5.1: failed due to language pack installation failure

I recently got a macbook Air and needed to reinstall my adobe creative suite to said new computer. I purchased creative suite online so I downloaded it from there and followed the installation instructions to a T.
I originally purchased Adobe Creative Suite in 2011 so it is version CS5.1
Everything installed successfully except Adobe Illustrator, which at the end left me this error message
ERROR: DW050: - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
how can I get illustrator on my computer?!
Hoping to sell my previous computer soon and I'm almost done transferring programs and photographs.
Thanks so much!

Which language is the application?
Which language is your system?
Which system?

What's the significance of the letter -p in the JRE installables

Hi,
Can anybody please let me know what is the significance of the letter "-p" in the JRE installables as i could see that till JRE 1.6.0_13 the name for the Window offline installable has -p {for eg: jre-6u12-windows-i586-p.exe} where as for the higher version i.e 1.6.0_14 onwards there is no letter "-p" {for eg: jre-6u14-windows-i586.exe} .
Appreciate your quick response in this regards.

qm control is only useful for procured materials
it
Manage quality-related information for materials, vendors, and manufacturers in quality info records
Monitor the QM systems of vendors and manufacturers
Supply quality documents with requests for quotations and purchase orders
Certify vendors or manufacturers that have QM systems implemented, to reduce the inspection requirement
Request that quality certificates be submitted with the delivered goods and monitor the receipt of these certificates
Inspect vendor goods at vendor sites (source inspections)
Block the payment of invoices until the goods have been inspected and accepted
U can use qm control key depending upon ur requirement

JRE Installation failure

Similar Messages

Maybe you are looking for