Jre6u27 win7 (64) applications can not detect

windows7 x64
I had jre7.x version installed. And it works fine.
Once I removed this version and installed jre6.27 (in fact, when install jdk6.27), applications can not find jre.
"JAVA_HOME" is set.
"Path" contains path to jre & jdk (i was try any varyations also with '\bin' subfolders).
javac run from any location.
The registry has all nessesary mentions jre & jdk.
But, nevertheless, applications does not detect jre.
Please help! Any suggestions are welcome.
fyi: javaFX 2.0.2 with sdk also installed in system.

I tried every thing
updated my bios
tried in device manager
tried in any mode you like
tried to install the latest drivers that support windows7

Similar Messages

  • ERROR The Audio Device supported by this application is not detected. the application will ex

    Sound is fine but I get error message every time I try to start any of the creative applications that come in mediasource like the graphic eq, speaker settings, surround mixer, EAX and THX consoles; the error: The Audio Device supported by this application is not detected. The application will exit.
    I have read the forum notes on this error message and seems other have had this same issue, but I don't see any solutions...if anyone knows anything about solving this little mystery, please reply - need to get into that console to fully utilize this sound card.

    AFTER AUTOUPDATE this problem began. I removed the audigy package and reinstalled everything from the factory CD and still get this message. This happens every time I update the audigy drivers and thx. I am tired of doing recoveries to get audigy to work. Too bad I keep forgetting that the updates cause this problem. Audigy Platinum 2 works fine wothout the update. I will never update again!
    How can I resolve this problem short of a full recovery?

  • DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

    I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
    Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
    I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
    When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0005h (I/O Access, BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h Unknown
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 0000A800h
    System IRQ 5, INT# A
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
    Vendor 02h Creative Labs
    Device 0002h EMU0K Audio Chipset (SB Li've!)
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 04h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 002002h CT4850 SBLi've! Value
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00009000h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 7002h PCI Gameport Joystick
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 0h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Input, type Other
    Subsystem ID 002002h PCI Gameport Joystick
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008800h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008400h
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    (Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
    So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
    I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
    I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
    Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
    Cheers,
    Russ.

    Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
    The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
    Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

  • Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

    Hallo,
    Can someone help me with this issue?
    I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
    I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
    So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
    What to do????
    It is something special with the DVD that i have from Toshiba ?????
    Thank you very much.

    Hi
    > I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
    So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
    The whole issue is really mysterious. In my opinion there are two options;
    Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
    Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
    If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
    Furthermore I found you second posting in other thread
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
    and I think more and more that this must be an graphic card issue.

  • IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

    Guys I really need your advice please...
    I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
    By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
    Thanks in advance.
    ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

    rzulfikar wrote:
    Thanks Chris for your solution.
    But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
    The problem is not about upgrading an iPhone to a newer version of iOS.  Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes.  You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
    Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it.  Your choice, your decision, your consequences.

  • Airplay can not detect apple tv

    Airplay mirroring can not detect apple TV.
    I upgraded to mountain lion this morning and the air play icon appears on my macbook pro but it can not detect my apple tv. Apple tv is running 4.4.4 gen 2.
    Any ideas?
    Here's the interesting part, when I disable airplay on the appleTV the icon on my macbook disappears and vice versa.

    4.4.4 is old.  It may be the reason but I can't confirm as my AppleTVs are 5.0+ and none of my Macs can Airplay.

  • (HELP~) Most applications can not be executed

    Hi, after updating my OSX 10.6.4, most applications (such as iTunes, iPhoto, Pages, Firefox... etc.) can not be executed. They always shows that the application can not be executed on this OS, even I had checked my MAC HD.
    However, when I swith to bootcamp OS (Windows XP sp3), everything goes fine.
    How can I fix it?
    Thank you all.

    Create a new User go to System Preferences > Accounts > "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
    If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to/Users/yourname/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving/Users/yourname/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    If the issue is systemwide then, you may be able to repair this with the The 10.6.4 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    -mj

  • I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say: You: Error access violation at 0x0055F525

    I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say:
    You: Error access violation at 0x0055F525. I reinstalled Adobe Air. No change. I went to the Adobe webside and they said to repair it with a program. I bought RegCure. Didn't change anything. What to do?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • My i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens. What should I do?

    my i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens.
    What should I do?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • WRT54GS Can not detect the router

    We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router.  I am using the router to access the internet and it can't be detected???
    I have powered it off enough times and then some and need to get this running to use the laptops.
    I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
    Thanks

    okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

  • HT4796 on my windows XP pro PC i opened windows migration assistant and the first message is: "Cannot start Outlook Express. The application can not initialize the storage. The computer doesn't have enough memory or your disk is full. (0x80007114)"

    on my windows XP pro PC i opened windows migration assistant and the first message is: "Cannot start Outlook Express. The application can not initialize the storage. The computer doesn't have enough memory or your disk is full. (0x80007114)"
    On my windows PC outlook express is NOT running and as far as i know, NOT installed.
    How do I install Outlook Express??
    I want to use my new Imac.....    

    Disk storage issues frequently happen if the hard disc is over 85% full.    Make sure your trash can is emptied after backing up any files you want to keep elsewhere.

  • Windows7 64-bit can not detect my creative sb live 24-bit 7.1

    >windows7 64-bit can not detect my creative sb li've 24-bit 7. windows7 can not detect my creative sb li've 24-bit 7.
    I tried every thing
    updated my bios
    tried in device manager
    tried in any mode you like
    tried to install the latest drivers that support windows7
    but windows 7 64-bit's actually can not see any sound card install in pci
    while windows XP and Vista and and and can see the card and work just great
    just cant
    Microsoft says its creative problem
    creative says it is microsoft problem
    I dont care whos problem is this
    Just want my card to work
    Dont ignore this thread cause I am not the only one who suffer this problem .
    any one knows what to do? what is the problem?
    is there any problem between creative and microsoft that I am paying the price for their problems.
    Just tired and want the solution

    I tried every thing
    updated my bios
    tried in device manager
    tried in any mode you like
    tried to install the latest drivers that support windows7

  • When I try to launch iTunes is says that the application can not be opened

    When I try to open iTunes it says that the application can not be opened, that the required folder can not be found. On my husbands log-on iTunes will open. I am so confused. Please help!!!

    Hello Keaton44,
    I recommend taking a look at this article named iTunes: Finding lost media and downloads found here http://support.apple.com/kb/ts1408
    If you need to re download the movies you bought from iTunes you can do that free of charge with this article.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Regards,
    Sterling

  • Can not detect wireless card

    WRE54G / Win XP SR2
    My laptop and PDA can connect to the network wirelessly with no problems.
    Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
    I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
    Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
    What is the wireless card that can't be found? The WRE54G?
    How do I resolve this?
    33#44

    this worked for me too.  Although I was never able to use the cisco install wizard successfully.  I am using WEP security on my access point.  I took the following steps.
    1.  From laptop, connect to network wirelessly with WEP security settings in place
    2.  From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
    3.  From Range Extender, hold auto-configure button.  It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
    4.  From laptop, disable security for the access point (via control panel, wireless network connection settings)
    5.  From laptop, connect to wireless access point (via control panel, wireless network connection settings).  test internet connection.  Internet should work.
    6.  From laptop, access range extender web utility.  open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase. 
    7.  From laptop, enable wireless security for the access point.  from browser, go to 192.168.1.1, select wireless security and enable it.  use the same settings from step 6 (from the range extender).
    8.  From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
    range extender, access point and wireless adapter/laptop should all be connected.

  • TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device.  The rest of the screen is blank; all menus are blanked out.  What do I do?

    I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light.  When I get into airport utility it attempts to scan for the device but can not detect it.  The utility screen is blank - nothing to select or configure.  The menus are also blank.  What do I need to do?

    I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light.  When I get into airport utility it attempts to scan for the device but can not detect it.  The utility screen is blank - nothing to select or configure.  The menus are also blank.  What do I need to do?

Maybe you are looking for