Jrew.exe has stopped working when iam tryin to install oracle9i on vista
jrew.exe has stopped working when iam tryin to install oracle9i on windows vista can anyone help me to resolve this issue
869902 wrote:
jrew.exe has stopped working when iam tryin to install oracle9i on windows 7 , 64 bit versionYou are reviving a 3-year old thread . . .
And if the OP couldn't install 9i on vista because it (9i) was too old to be certified on Vista, what do you suppose of 9i on Win7?
Similar Messages
-
Jrew.exe has stopped working when iam trying to install oracle on vista
hi,
iam gettin an error stating that jrew.exe has stopped working when iam trying to install oracle 9i on windows vista cam anyone help me in resolving itDuplicate post. Please stick to Re: jrew.exe has stopped working when iam tryin to install oracle9i on vista
-
I have downloaded the enu file from MS, for the above SQLServer 2014 express edition.
After checking that all the prerequisets had been met, I extracted the files, from the enu, to a folder and ran the Setup.exe.
Immediately, I received the warning "The ScenarioEngine.exe has stopped working" and the installation stops.
I did not encounter this issue installing SQLServer 2012 Express with tools, on the same pc, and it has been running without any issues,
The pc concerned is running Windows 8.1.SQL Server 2014
1. Save the following in a text file, change the extension to .reg, double-click on the file, and on the prompt that appears, select yes to populate the registry:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap]
"BootstrapDir"="C:\\Program Files\\Microsoft SQL Server\\120\\Setup Bootstrap\\"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap\Setup]
"PatchLevel"="12.00.2000.80"
2. Next, copy the following files and folders from the media to the specified destinations:
File/Folder in media
Destination
X64/X86 folder (depending on what architecture you want to install)
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Setup.exe
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Resources folder
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Next, re-run the setup, and it should proceed beyond the point of error this time.
As always, comments/suggestions/feedback are welcome and solicited. -
ITunes has stopped Working when using Ipod shuffle 3gen on Windows Vista HB
Itunes keeps shutting down when I insert my Ipod shuffle into the usb connection of my latop. I am using a Windows Vista Home Basic for an OS.
Not sure if this is a Vista, Apple issue, or something else...
I have contacted apple about this and uninstaled/reinstalled Itunes. Yet after all this, I get the same error message. The message reads:
"iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
As far as I know Vista should be compatible with iTunes and it is until I actually try to use my shuffle (newest model). Its weird because my shuffle works fine on a second computer that has Windows XP for an OS...
Does anyone have a solution to this??
Thanks in advance!i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)
-
Sqldeveloper64W.exe has stopped working
Problem Summary
Receive error: sqldeveloper64W.exe has stopped working when attempting to open .sql files
Problem Description
Within SQL Developer 4.0, I've gone into Preferences > File Types, found the .sql extension and checked the box that says Open with SQL Developer. I've gone to the Set Associations control panel in Windows 7 Professional 64 bit and confirmed that the Current Default is set to sqldeveloper64W. I've used the CMD function to access regedit, deleted the file associations for .sql and set all preferences again. If SQL developer is not already open on my machine and I attempt to open a .sql file, the application launches fine. If I try to open additional files from windows explorer or windows search, I get an APPCRASH indicating that sqldeveloper64W.exe has stopped working. I click close the program and sql developer remains open, but my file has not opened.
Error Codes
sqldeveloper64W.exe has stopped workingThis problem has been plaguing me for ages too, but I think I've finally found the solution from this post:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/problems-with-file-association-in-windows-7-64-bit/8a84fcec-22df-4942-8e35-d98dbe96e327
"In regedit: Navigate to Computer\HKEY_CLASSES_ROOT\Applications and find your .exe name.
Navigate under its name to shell>open>command. In the Default change its location to the actual location of the executable, hit okay and then try and reassociate the file type as you normally would."
In my particular case, I browsed to Computer\HKEY_CLASSES_ROOT\Applications\sqldeveloper64W.exe\shell\Open\Command
and changed the (Default) value
from "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper\bin\sqldeveloper64W.exe" "%1" %*
to "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper.exe" "%1" %*
And now the file association works correctly, and now with sql developer already open, I can open another .sql file from windows explorer. Fingers crossed this is finally fixed!
Keith -
Sqldeveloper.exe has stopped working
I get this prompt that says "sqldeveloper.exe has stopped working" when I double click a .sql file using windows 7 explorer. My sqldeveloper application is running already and does stay up and connected to the database server. My two options at this prompt are "close the program" and "check online for a solution". I choose "close the program" but the program does not close. "find a online solution" does nothing. There is no icon associated with .sql files when viewing in explorer. Should there be?
If I use sqldeveloper to browse to a .sql it will open it. It does know to open .sql files. But I need to also work when browsing for files using windows explorer.
Anyone have this problem? If so, how did you resolve it?Do you have any older installations hanging around? I don't normally open files from windows, but I did the other day and it started up SQL Developer 1.5. I have been using 2.1 and then various pre-releases of 3 up to production since I last used 1.5. It looks like file associations don't get updated.
It may be you have an old, non-working installation which is what is giving you the problem. -
"ProgramName.exe" has stopped working?
Hello,
I am currently in school and am trying to compile programs using Visual C++ Express 2010, because that is what the professor uses. I was told to download the source code from the books website, and build from there. When compiling any of the books
code however I get the error message: "ProgramName.exe" has stopped working? I have re-installed VS, and DirectX (as these are the only libraries used), and checked to ensure I have the Windows 8.1 SDK installed as the instructor said, but I am still
getting the error 99% of the time (Every once in a while it will not pop up). The program runs fine while debugging, but when I try to run the generated executable outside VS it exits immediately.
Can anyone tell me what could cause this?Hi Jhessin,
Test Tools in Visual Studio 2010 and 2012forum is to discuss Visual Studio testing issues. Your issue is about the specific program. If your project is DirectX application, I suggest consulting
this issue on DirectX forum provided here:
http://xboxforums.create.msdn.com/forums/
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer -
PProHeadless.exe has stopped working error when opening projects in Adobe Media Encoder CS6
Hi, I recently upgraded to Adobe Cloud CS6 and am having problems with the Adobe Media Encoder CS 6 (version 6.0.1.31 64-bit).
When I try to add Adobe Premiere projects in AME, it sometimes gives me the following error:
PProHeadless.exe has stopped working
I tried rebooting, and it still gives me the same error. Sometimes the project will load, sometimes it won't.
The Premiere projects contain a H.264 .mov file coming from my Canon T2i. I also added an overlay logo to the bottom right of the video that I created in Adobe After Effects, which only contains text, no effects, no motion, etc. Sometimes I also have a .wav file recorded from a Zoom H4n, but not always. I usually edit those in Adobe Audition with the remove noise feature.
I am running on Windows 7 Ultimate 64-bit. I'm using an i7 with 16GB ram and an ATI 6870 video card.
I have the LUT buddy plugin installed.
It will give me the error the first time I try to load the project, and the connection to Dynamic Link Server will fail. Afterwards, if I try to load the project again, even if I restart AME, it stays stuck in the Connecting to Dynamic Link server...
Any help anyone could provide would be appreciated.Hi Dima,
Thank you very much for your prompt reply. Dragging the sequence from PPro to AME made AME lock up. But your second suggestion of exporting the video directly from PPro seems to be working. I still have 6 minutes to go, but at least it got up to 25% so far, so everything seems good.
Thank you once again!
(although it would be nice if I could go through AME just in case) -
Can I sync when I see ATH.exe has stopped working in iTunes?
Can I still sync when I get the message "ATH.exe has stopped working" in iTunes?
Hi Amethest,
Thanks for visiting Apple Support Communities.
If you're unable to sync due to this error message, you may need to remove and reinstall iTunes by following the steps in of these articles:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Best,
Jeremy -
When I turn on my PC with Vista 64 bits it gives me a message "ApplePhotoSream.exe" has stopped working correctly. Windows will close the program.
Please help!!!Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?
-
when i start my computer, windows vista serv. pac 2, i receive message: applephotstream.exe has stopped working. how do i fix this
Hello! You've posted your question in the iPhoto for iOS forum. This forum is for questions about using Apple's iPhoto.app on an iPhone or iPad. Do you have an iPhone or iPad that you're synchronizing pictures with your PC? If so, you should probably post your question in the Using iPhone or Using iPad forum. We can also ask the Hosts to move this topic into the correct forum if we know which hardware device you're using.
-Doug -
Upon starting my PC I get a message that ApplePhotoStream.exe has stopped working. Windows will close the program and advise if a solution is found. Nothing happens and I can no longeer send photos from my ipad2 to my computer using PhotoStream. Please, any assistance would be greatly appreciated!
Thank youYou are on pc or mac? I think pc. Below is a link that gives the steps, and it suggests you need to down load a controller, and then it tells you how to set it up. See if this helps any.
http://www.gottabemobile.com/2011/10/12/icloud-photo-stream-on-windows-pc/
Within the write up is a link to the apple site where the download is available, for free! -
I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name: BEX
Application Name: appkernel.exe
Application Version: 0.0.0.0
Application Timestamp: 4f06397d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.325
Fault Module Timestamp: 4df2be1e
Exception Offset: 0008af3e
Exception Code: c0000417
Exception Data: 00000000
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 81c8
Additional Information 2: 81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3: eec1
Additional Information 4: eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDLHi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo -
I sync my devices with a PC running windows. I have turned on Photo Stream on my PC, iPhone4S & iPad2.
On my PC it creates two default folders in Pictures called "My Photo Stream" and "Upload".
Instructions says that you can add photos to the "Upload" folder and it will automatically upload to your "My Photo Stream" folder and when your devices are connected to wi-fi they will upload to each device and show up in the "Photo Stream" section of Photos.
I was able to upload 50 photos but then I got an error message that applephotostreams.exe has stopped working.
How do I fix?I was having the same problem. Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly. Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream. While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000). When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution). Perhaps < 1 MB? To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality.
Has anyone heard about a picture file size limit?
Maybe you are looking for
-
Is there a way to get rid of the JRadioButton Text Border
When a JRadioButton is selected, can you get rid of that text outline border? Ex: http://course.cs.ust.hk/comp201/2007summer/users/yyuan/labs/lab4/jRadioButton.jpg
-
Brand new Macbook Pro slower than my 2006 Macbook
I bought a new Macbook Pro last month and upgraded the RAM to 4 GB and the hard drive to 500 GB. My previous Mac was a mid-2006 Macbook with 2 GB RAM. I was expecting it to be noticeably faster than my 2006 Macbook (which is still running Tiger/10.4)
-
Informix Datastore reverse engineering error
Hi , When i am trying to do customised reverse engineering of informix tables. It is able to retrieve four tables only and failing at the last step mentioned below. there are 140 tables in the database. can anyone help me with this. i am using the li
-
How to create Stubs for object
Hai all, I created a object which extends javax.rmi.remote. i want create stubs for this object programatically. is it possible? (like Compiler.compile()). Thanks with regards Sree
-
Error message for video and audio ?
My text messaging is working but my audio and video is not. It was working a couple of weeks ago just fine. Any thoughts?