JRFC Error jrfc_lg LgGroup failed
Hi,
We can see this error in dev_server0 file. We have two server nodes. for our XI Server. And also i dont see the same error in dev_server1 file.
Fri Aug 24 09:11:40 2007
ERROR => JRFC> Error jrfc_lg LgGroup failed(-6) [jrfclg_mt.c 344]
ERROR => mshost: sapxihost, msserv: sapms<SID>, r_group: PUBLIC [jrfclg_mt.c 345]
Can you please help me rectifying this error.
Thanks,
Tanuj.
Hi Tanuj,
Check you have Logon group in http://hostname:5<nr>00/nwa
if you dont have create one and in SMLG also.
Arjun
Similar Messages
-
PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance. -
SEVERE ERROR: Starting system failed, rc=0
Hi Experts
I am having problem in SRM 2.0 to SRM 5.5(NW 7) Upgrade. I have problem in startup of Shadow Instance. Here is log description.
more DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 01] Wed Jan 9 17:56:30 2008
[Thr 01] WLM Tag 'ED2/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4722694
*[Thr 01] **LOG Q01=> MsSInit, MSStart (Msg Server 1 4722694) [msxxserv_mt. 1824
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] load acl file = /usr/sap/put/ED2/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 01] HTTP logging is switch off
*[Thr 01] **LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3174]
*[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8*
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:8100) [nixxi.cpp 3174]
*[Thr 01] *** ERROR => MsHttpCommInit: Ni2Listen(8100) (rc=NIESERV_USED) [msxxhtt*
p_mt. 3444]
*[Thr 01] *** ERROR => MsHttpPortBind: MsHttpCommInit (port=8100) [msxxhttp_mt. 3*
847]
*[Thr 01] *** HTTP port 8100 state CLOSED ****
[Thr 01] MsHttpOwnDomain: own domain[1] = ent.agt.ab.ca
[Thr 01] ms/icf_info_server : deleted
*[Thr 01] *** I listen to port sapmsSHDED2 (3605) ****
[Thr 01] CUSTOMER KEY: >N1501146322<
more STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080109175630")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPED2
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPED2
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX
_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/ED2/SYS/exe/run
4 ETQ399 ext. env.: LIBPATH=/usr/sap/ED2/SYS/exe/run:/usr/lib:/lib:/usr/sap/ED2/
SYS/exe/run
4 ETQ399 2008/01/09 17:56:30: put_execute: (startsap) forkpid:9027768
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
You help & time in this matter will be highly appreciated.
Thanks & Regards
JigneshHi Marcus
Thanks for quick response. I did same exercise earlier. Shadow Instance started without dispatcher.
iedm3330dd:ed2adm> ps -ef | grep ED2_DVEBMGS01
ed2adm 4817018 7942216 0 09:16:45 - 0:00 ms.sapED2_DVEBMGS01 pf=/usr/s
ap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4821170 7942216 0 09:16:45 - 0:00 co.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4849734 7942216 0 09:16:45 - 0:00 se.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4853912 8847520 0 10:01:29 pts/1 0:00 grep ED2_DVEBMGS01
Log file :
iedm3330dd:ed2adm> pwd
/usr/sap/put/ED2/DVEBMGS01/work
iedm3330dd:ed2adm> more dev_disp.new
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid ED2
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 4853984
Thu Jan 10 09:16:46 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4853984) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 111 successfully loaded
shared lib "dw_xtc.so" version 111 successfully loaded
shared lib "dw_stl.so" version 111 successfully loaded
shared lib "dw_gui.so" version 111 successfully loaded
shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
WARNING => DpNetCheck: NiServToNo(sapdp01) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw01) failed (rc=-3) [dpxxtool2.c 5223]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >iedm3330dd_ED2_01 <
DpShMCreate: sizeof(wp_adm) 7488 (936)
DpShMCreate: sizeof(tm_adm) 4957464 (24664)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548040/548048
DpShMCreate: sizeof(comm_adm) 548048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 7000000000a6000, size: 5603560)
DpShMCreate: allocated sys_adm at 7000000000a6000
DpShMCreate: allocated wp_adm at 7000000000a7ba0
DpShMCreate: allocated tm_adm_list at 7000000000a98e0
DpShMCreate: allocated tm_adm at 7000000000a9940
DpShMCreate: allocated wp_ca_adm at 700000000563e58
DpShMCreate: allocated appc_ca_adm at 7000000005684a8
DpShMCreate: allocated comm_adm at 700000000569c18
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 7000000005ef8e8
DpShMCreate: allocated gw_adm at 7000000005ef968
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 7000000005ef998
DpShMCreate: allocated wall_adm at 7000000005ef9a0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed (--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:16:56 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 10 16:16:56 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl Us
er Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Thu Jan 10 16:16:56 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 1870]
Dump of tm_adm structure: Thu Jan 10 16:16:56 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jan 10 16:16:56 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:17:01 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >iedm3330dd_ED2_01 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x110750af0 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 1, 3 )
ShmCreate( 1, 0, 2, -> 0x7000000000a4000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 2, 3 )
ShmCreate( 2, 0, 2, -> 0x7000000000a6000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x700000030000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 14, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 11, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 33, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 42, 0, 2, 0xfffffffffffec78 )
Profile configuration error detected, use temporary corrected setup
Shared Pool 40: ipc/shm_psize_40 = 68000000 (too small)
Shared Pool 40: (smaller than default 112000000)
Shared Pool 40: (default size assumed 112000000)
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 43, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 45, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 44, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 54, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 46, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 47, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 17, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 34, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 58, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 51, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 52, 3 )
ShmCreate( 52, 0, 2, -> 0x700000000600000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 30, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 56, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 10, 3 )
ShmCreate( 10, 0, 2, -> 0x700000000000000 )
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 57, 0, 2, 0xfffffffffffec78 )
ShmCreate( 10, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 10 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0xfffffffffffed60 )
ShmKeyPermission( 62 ) = 0740 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0xfffffffffffed70 )
ShmGet( 10, 31, 0, 2, 0xfffffffffffebf8 )
ShmCreate( 10, 0, 2, 0xfffffffffffea18 )
ShmKeyPermission( 10 ) = 0740 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 4853984) [dpxxdisp.c 10631]
shutdown completed - server stopped ***
I have already requested for port entry change in services file.
Jignesh -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you
Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen -
An error has occurred: "Failed to process the request."
I try to make a deploy and this error appears:
[code]An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Product: null, Vendor: null, Version: null, Build ID: 6.3007.00.0000.20040726091658.0000 (release=630_VAL_REL, buildtime=2004-07-29:21:25:09[UTC], changelist=267691, host=PWDFM026), Build Date: Fri May 06 16:36:04 VET 2005
Web Dynpro code generators of DC local/PruebasEstilos:
SapDictionaryGenerationCore: 6.4014.00.0000.20050818151336.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:08:16[UTC], changelist=363802, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4014.00.0000.20050818152356.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:11:31[UTC], changelist=363818, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:18[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapGenerationFrameworkCore: 6.4014.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:01:32[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:15:40[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4014.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:05:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:26[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:16:08[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/progmodel/gci/IGCIComponentDelegate
Loader Info -
ClassLoader name: [local/PruebasEstilos]
Parent loader name: [Frame ClassLoader]
References:
common:service:http;service:servlet_jsp
service:ejb
common:service:iiop;service:naming;service:p4;service:ts
service:jmsconnector
library:jsse
library:servlet
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:j2eeca
library:jms
library:opensql
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
interface:resourcecontext_api
interface:webservices
interface:ejbserialization
sap.com/tcwddispwda
sap.com/tcwdcorecomp
service:webdynpro
service:sld
library:tcddicddicservices
library:com.sap.aii.proxy.framework
library:tcgraphicsigs
library:com.sap.mw.jco
library:com.sap.lcr.api.cimclient
library:sapxmltoolkit
library:com.sap.aii.util.rb
library:com.sap.util.monitor.jarm
library:tcddicddicruntime
library:com.sap.aii.util.xml
library:tccolapi
library:com.sap.aii.util.misc
library:tc~cmi
library:tccolruntime
Resources:
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\local\PruebasEstilos\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
The error occurred while trying to load "sap.wdp.InternalTest1".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:328)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:40)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doInit(ClientComponent.java:775)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:329)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:356)
at com.sap.tc.webdynpro.clientserver.task.Task.createApplication(Task.java:219)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:547)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:57)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:139)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:101)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:38)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
[/code]
I don't know what does it mean, I will appreciate it any helpfull information as soon as possible(urgent).
TokioHi, Armin
In fact I'm using NWDS SP14 but I don't know what is the version of Web AS.
I was reading and posting few days ago some question about install and uninstall Web AS, J2EE Server, etc. I could do something but just when I' trying to deploy and run NWDS Application that error occurred.
Well, I supose in this case I have to install a new version of Web AS, from the "SDN Download Catalog" what I must to do? ...
In Download - Sneak Preview SAP NetWeaver page, what exactly I have to download to install:
<i>Download file 1 (1.9GB)
Download file 2 (1.9GB)
Download file 3 (.5GB)
Download file 4 (.8GB)</i> ?
Thanks for your help...
Tokio -
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/ -
When I open Power Query in my Excel and connect to the SharePoint site that my list(s) reside in the tool displays the tables but when I select the table to pull the data I receive this error
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
My SharePoint version is the SharePoint online 2013 version.
thanks
Andrew
BTW: all the system created lists (like L MicroFeed) in the SharePoint do work properly. I can open them in Power Query and look at the dataGUTN,
can you submit this as a bug in the UI via the Smile Frown button?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction? -
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew
Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren -
I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?
BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me? -
Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350. Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13. How do I fix it so I can print?
i am getting the same error, suddenly, on 10.9.5
-
ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3
I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
MadhaviHi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.
Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
ALV - Adding an additional row after subtotal
Hi Friends, I want to develop an ALV report wherein I want to have an additional row after the subtotal in ALV to show some calculation. Please refer the below link for the report layout. In the ALV output after subtotaling the total operating reve
-
Save a report (or text file) in pdf format?
Hi, I like to save a kind of log file in a non changeable format like pdf. I'm using the DSC module under LabVIEW are there some possibilities? Or is there a chance to save text file into a postscript file? Thanks for help, martin
-
Multiple Valid Addresses of a specific address type -- SD Customer
Hi Gurus - My customer wants to add a new address type called "Job Site Address" (ZJ) which they want to attach to all customers. I believe this is standard functionality. However, they have a situation where the customer could have many valid Job Si
-
Can someone send me the link to download EP 6.0 software and install guide. I have checked under My application component >EP but don't find any doc or software to download from there . when i went to https://websmp106.sap-ag.de/ep60 it forward me t
-
hi we want to change the Availability Status of vehicle from *Available for Contract to Not In Service* Can any 1 able to guide how to do it? Regards