Jrly is not starting on Windows XP?

Hi Guys,
I am trying to srtat jrly on windows xp but getting message BEA jolt Relay start unsuccessful .
D:\bea\tuxedo9.0\udataobj\jolt\relay>jrly -start
BEA Jolt Relay start unsuccessful:
Current State: 0x:1
Win32 Exit: 0
Service Exit: 0
Checkpoint: 0x: 0
WaitHint: 0x: 0
D:\bea\tuxedo9.0\udataobj\jolt\relay>
I will appreciate your help.
Here are the steps i followed.
1. D:\bea\tuxedo9.0\udataobj\jolt\relay>jrly -install
BEA Jolt Relay Created
2.D:\bea\tuxedo9.0\udataobj\jolt\relay>jrly -set -f D:\bea\tuxedo9.0\udataobj\jolt\relay\jrly.config
Configuration file set.
3.D:\bea\tuxedo9.0\udataobj\jolt\relay>jrly -start
BEA Jolt Relay start [b]unsuccessful:
Current State: 0x:1
Win32 Exit: 0
Service Exit: 0
Checkpoint: 0x: 0
WaitHint: 0x: 0

I think it is not Supported on Windows XP.
This is what i got from BEA Documents.
JRLY as an NT service is available only for Microsoft Windows NT.
Thaks all for your time .
Regards,
Kumar

Similar Messages

Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs. What to

Hej!
Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.
What to do?
/yoel

Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
After setting up the setting up the system.
I ensured the following : (although begrudingly) so I could do a system restore if needed.
-I disabled Anitvirus & Firewall
-enabled Volume Shadow Copy Service
I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
i also downloaded and installed the 32 bit versions of :
C++2008 redistributable (32 bit)
C++2008 SP1 redistributable (32 bit)
I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
I installed Photoshop Elements (32 bit)
I started both apps and updated them to 12.1.
Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

I just "upgraded"????? to Lightroom CC, now it will not start on Windows 7. can someone help me?

I had Lightroom 5 and the creative cloud photographer bundle. upgraded (some joke) to Lightroom CC and no lightroom will not start on Windows 7. just dead in the water. any help?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

Multiple instances not starting using Windows services

Hi,
We have two Oracle instacnes installed in same oracle home. They are not starting using windows 2000 service manager.
I have to go to svrmgrl and set the ORACLE_SID environment variable to startup each instance. How can I make them start through windows Services instead of manually doing it.
Is installing multiple instances in same home a good idea?
These multiple instances are not part of paralell server.
Regards,
Wasim.

Hi,
I have checked the registry keys and everything looks ok.
ORACLE_instance_AUTOSTART is true
ORACLE_instance_PFILE is correct
ORACLE_instance_SHUTDOWN is true
ORACLE_instance_SHUTDOWNTYPE is i
Above values are right for both instances. I even have recreated the services using ORADIM. I can start both instances by going to command prompt set ORACLE_SID and start the instance using SVRMGRL. But they'll not autostart when the machine is rebooted.
Regards,
Wasim.

Windows could not start the Windows Audio service on Local Computer.

Hi
I started my PC today and i didn't have sound... weird
i'm getting this error when i want to start the Windows Audio service
"Windows could not start the Windows Audio service on Local Computer.
Error 0x800706cc: The end point is a duplicate."
HELP PLEASE!!!!!

Hi,
Have your gotten any updates installed?
Regarding to current information, this issue can be caused by corrupted updated files or drivers.
Please check if there is any update related to audio driver. Can this issue be fixed if you remove such update?
I also suggest you can try to reinstall Audio driver to check the results.
Kate Li
TechNet Community Support

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

SQL Express 2008 R2 will not start on Windows 7 Home

Ok, This used to work, and then over night my system rebooted and now I cannot start SQL Express 2008 R2 after I have unistalled, and re-installed.   Cleared out the folders and the certificates, changed the Named Pipes configuration and all to
no avail.   Here is my log file.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2014-06-14 08:45:18.18 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
   Jun 17 2011 00:54:03
   Copyright (c) Microsoft Corporation
   Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 08:45:18.18 Server      (c) Microsoft Corporation.
2014-06-14 08:45:18.18 Server      All rights reserved.
2014-06-14 08:45:18.18 Server      Server process ID is 8924.
2014-06-14 08:45:18.18 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 08:45:18.18 Server      Authentication mode is MIXED.
2014-06-14 08:45:18.18 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 08:45:18.18 Server      This instance of SQL Server last reported using a process ID of 2820 at 6/14/2014 8:32:55 AM (local) 6/14/2014 1:32:55 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 08:45:18.18 Server      Registry startup parameters:
   -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
   -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
   -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 08:45:18.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 08:45:18.18 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 08:45:18.21 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 08:45:18.23 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 08:45:18.25 spid7s      Starting up database 'master'.
2014-06-14 08:45:18.28 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 08:45:18.29 spid7s      SQL Trace ID 1 was started by login "sa".
2014-06-14 08:45:18.29 spid7s      Starting up database 'mssqlsystemresource'.
2014-06-14 08:45:18.30 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid10s     Starting up database 'model'.
2014-06-14 08:45:18.32 spid7s      Informational: No full-text supported languages found.
2014-06-14 08:45:18.32 spid7s      Starting up database 'msdb'.
2014-06-14 08:45:18.33 Server      Error: 17190, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 08:45:18.33 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 08:45:18.33 Server      Error: 17826, Severity: 18, State: 3.
2014-06-14 08:45:18.33 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 08:45:18.33 Server      Error: 17120, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-=-=-=-=-=-=-=-=-=-=
I am logged into either the Administrator Account or my Account in which I am in the Adminstrator Group or an Admin.   My OS is Windows 7 Home Premium Edition, so I cannot clear out the MSSQL groups and things I have seen online. Since this
is Express, there is limited capabilities with the config tool.
I have tried to change the log in as in the SQL Configuration tool and every item I check, Local Service, Local System, Network Service all give the same error,
"Cannot Find Object or Property. [0x80042004]
SInce I have Home Premium, MMC will not load the snap in for Local Users and groups to check out these items.
A check of the net user shows only the Administrator, Guest and my local login in Admin Account. net localgroups show these items.
*Administrators
*Distributed COM Users
*Event Log Readers
*Guests
*HomeUsers
*IIS_IUSRS
*IIS_WPG
*Performance Log Users
*Performance Monitor Users
*SQLServer2005SQLBrowserUser$MARTINDAHL-PC
*SQLServerFDHostUser$MartinDahl-PC$ACT7
*SQLServerMSSQLServerADHelperUser$MARTINDAHL-PC
*SQLServerMSSQLUser$MartinDahl-PC$ACT7
*SQLServerSQLAgentUser$MARTINDAHL-PC$ACT7
*Users
The command completed successfully.
I checked the SSL and Force Encryption is set to no and the certificates have been cleared.
I am not sure how to solve this problem.   Please help.   Thanks, in advance.

I created a new Administrator account on the machine, mdahl.   I then started the SQL Configuration Tool and changed the log on to this new account. Same problem.   Here is the SQL Log.
2014-06-14 11:24:15.83 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
   Jun 17 2011 00:54:03
   Copyright (c) Microsoft Corporation
   Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 11:24:15.83 Server      (c) Microsoft Corporation.
2014-06-14 11:24:15.83 Server      All rights reserved.
2014-06-14 11:24:15.83 Server      Server process ID is 11448.
2014-06-14 11:24:15.83 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 11:24:15.83 Server      Authentication mode is MIXED.
2014-06-14 11:24:15.83 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 11:24:15.83 Server      This instance of SQL Server last reported using a process ID of 5952 at 6/14/2014 11:21:35 AM (local) 6/14/2014 4:21:35 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 11:24:15.83 Server      Registry startup parameters:
   -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
   -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
   -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 11:24:15.83 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 11:24:15.83 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 11:24:15.87 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 11:24:15.88 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 11:24:15.90 spid7s      Starting up database 'master'.
2014-06-14 11:24:15.91 spid7s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.92 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 11:24:15.93 spid7s      SQL Trace ID 1 was started by login "sa".
2014-06-14 11:24:15.93 spid7s      Starting up database 'mssqlsystemresource'.
2014-06-14 11:24:15.93 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid10s     Starting up database 'model'.
2014-06-14 11:24:16.03 spid7s      Informational: No full-text supported languages found.
2014-06-14 11:24:16.03 spid7s      Starting up database 'msdb'.
2014-06-14 11:24:16.03 Server      Error: 17190, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 11:24:16.03 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 11:24:16.03 Server      Error: 17826, Severity: 18, State: 3.
2014-06-14 11:24:16.03 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 11:24:16.03 Server      Error: 17120, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Also, the link you provided is to Windows Vista, not Windows 7 Home Premium. However, I did look at the registry setting they said to look at in the link.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Under the ProfileList subkey, delete the subkey that is named <var>SID</var>.bak.
Note <var>SID</var> is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The <var>SID</var>.bak subkey should contain a ProfileImagePath registry entry that points to the original profile
folder of the user account that is experiencing the problem.
Exit Registry Editor.
Looking into my registry for my ProfilesList as mentioned. I have these items.
S-1-5-19 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\LocalService, State (REG_DWORD) 0x0000000
S-1-5-20 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\NetworkService, State (REG_DWORD) 0x0000000
Then I have an item for each of my three accounts, Administrator, Martin Dahl, and mdahl, All admin Accounts, which has no sid.bak, but a Sid, so not sure how this link helps me either.   Still looking for assistance. Still not starting.

Bridge CS6 will not start in Windows 7

Bridge CS6 (both 32 and 64) don't start in Windows 7.
Bridge starts in Task Manager for a few seconds, but goes away. No errors, no logs.
I have tried all the suggestions I've found within the forums, including checking settings,, temp environment variables, deleting C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS6 (including the directory itself), etc. No luck. Adding a new user, then using it to start Bridge worked great, but that is not really a solution. One added piece of info: Bridge did recreate the above directory before dying, although it remains empty. I haven't found any logfiles that might help understand how far it got. Is there a log file or a registry setting that will enable detailed logging to help diagnose this?
I managed to gather a temp xml file that has some info that might help. This file shows up for the few seconds when Bridge is running.
<?xml version="1.0" encoding="UTF-16"?>
<WERReportMetadata>
<OSVersionInformation>
<WindowsNTVersion>6.1</WindowsNTVersion>
<Build>7601 Service Pack 1</Build>
<Product>(0x1): Windows 7 Ultimate</Product>
<Edition>Ultimate</Edition>
<BuildString>7601.17835.amd64fre.win7sp1_gdr.120503-2030</BuildString>
<Revision>1130</Revision>
<Flavor>Multiprocessor Free</Flavor>
<Architecture>X64</Architecture>
<LCID>1033</LCID>
</OSVersionInformation>
<ParentProcessInformation>
<ParentProcessId>3996</ParentProcessId>
<ParentProcessPath>C:\Windows\explorer.exe</ParentProcessPath>
<ParentProcessCmdLine>C:\Windows\Explorer.EXE</ParentProcessCmdLine>
</ParentProcessInformation>
<ProblemSignatures>
<EventType>APPCRASH</EventType>
<Parameter0>Bridge.exe</Parameter0>
<Parameter1>5.0.0.399</Parameter1>
<Parameter2>4f5ec28e</Parameter2>
<Parameter3>Bridge.exe</Parameter3>
<Parameter4>5.0.0.399</Parameter4>
<Parameter5>4f5ec28e</Parameter5>
<Parameter6>c0000005</Parameter6>
<Parameter7>000000000036ae49</Parameter7>
</ProblemSignatures>
<DynamicSignatures>
<Parameter1>6.1.7601.2.1.0.256.1</Parameter1>
<Parameter2>1033</Parameter2>
<Parameter22>dca5</Parameter22>
<Parameter23>dca5eef3eb4639786ac397e2f866e6e1</Parameter23>
<Parameter24>cde9</Parameter24>
<Parameter25>cde994f1594c84823c9c1be215d1d32c</Parameter25>
</DynamicSignatures>
<SystemInformation>
<MID>C1C89176-2E22-457C-8B68-F9633BDBDBAB</MID>
<SystemManufacturer>System manufacturer</SystemManufacturer>
<SystemProductName>System Product Name</SystemProductName>
<BIOSVersion>0303</BIOSVersion>
</SystemInformation>
</WERReportMetadata>
There is obviously something in my normal user's profile or environment that is getting in the way of startup. Yes, my normal user is an admin. You (Adobe) have the code and the startup can't be that convoluted. Someone should be able to walk the code, figure out what things are checked between creating the above directory and the next externally detectable step (like creating a file in this directory or logging something into a log file), then reply here with a list of specific things to check.
I got into a chat with Adobe support several days ago, where I went through several steps of ensuring I was using a properly licensed version only to be told that he didn't know Bridge and asked that I call during the day on Monday. The sign off message to that chat was funny - they mentioned 24x365 support :-) Luckily, I've worked support in my past and I have a sense of humor.
I tried to file a bug form the web, but failed to navigate the amazingly bad support web experience of Adobe.com. At one point, I had found a place to do it, pasted the above into that window, then tried to submit - I wasn't logged in. So, I clicked the login link and got an error pop-up window with a bad-link error. I came in fresh - logged in, then could not find that "report a bug" screen again. Truly amazing. But I guess, if you cannot report a bug, it doesn't exist - so congratulations on your bug-free products.
A suggestion:
Provide a simple link to report a bug that's not tied to a service plan. It would simply be a way to tell you about problems with the hope that a solution could be provided in a future release - these can optionally be logged to the forums for community involvement. I don't mind logging in to prove I'm a valid user.

Adobe staff has to browse these forums on their own time (I know that should be part of their job) so their visits are infrequent.
There are several sites to report bugs which seems to be counterproductive. I think this one has the most support right now. http://feedback.photoshop.com/photoshop_family
And you are sure you are not running Bridge CS5 in the background? You can only run one Bridge program at any one time.
In both the Mac and Win OS seems like the workaround to create a new user works frequently, but it is a hassle. In your problem solving did you unistall everything then run the Adobe Script Cleaner?
Although this is a stretch for this problem, but might search your uninstall directroy and see if there are any expired Adobe trials you have not uninstalled. For whatever reason it can stop launch of Bridge "as you need to launch parent application at least once". Apparently even though it is long gone it is still seeing it as "parent" program. As I said it is kind of a stretch here, but you never know.
Good luck on this as I know it is extrememly frustrating and Adobe does have its communication problems.
That is why it is important for the users to step up and start contributing to these forums with suggestions on what to try, thiings they have tried and worked or did not, etc.

Wily Enterprise Manager Service not Started in Windows 2008 Server

Hi All,
Our Solution Manager is in EHP1 SP21 and OS-Windows 2008 Server.
We installed Wily Enterprise Manager 8.0. and found 1 non-fatal error in the installation log. The service is not starting.
However it works fine for Windows 2003 Server.
Can anyone encountered with the same kind of problem?
This is the latest log file information:
Summary
Installation: Successfulwith errors.
387 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Action Notes:
Execute ANT Script:       Script:
                          Status: ERROR
                          Additional Notes: ERROR - E:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:425: Timeout: killed the sub-process
Thank you in advance.
Regards
Sanjai

Note 1273028 - Introscope 8 Release Notes resoved this issue.
Known problems in all Releases 8.x
2. Windows Server 2008 is not yet officially supported by CA Wily for the Enterprise Manager. If you want to install the Enterprise Manager anyway, set the "Windows 2003 compatibility mode" for the installer before launching it. To activate this mode, right click on the installer.exe file in the Windows Explorer, select tab "Compatibility", activate the check box for compatibility mode and select Windows 2003. If you do not set this, the installer will consider your OS as Unix and install shell scripts (no suffix) instead of batch files (.bat) and leave out some files for Windows Service registration.
If the windows service still fails to start please check if files ServiceWrapper.jar and ServiceWrapper.dll are present in folder lib. If not download them from attachment of this note.
The service should start although giving an error message regarding the ServiceWrapper.dll. You can ignore this error.

Photoshop CS5 and CS6 does not start. Windows 7

I am using Photoshop CS5 as well as CS6, 64-bit on Windows 7. Since the last few days, I noticed that Photoshop would take a very long time to start (earlier it used to start within few seconds). Today, I found that both the Photoshop versions do not start at all. Nothing happens when I click the short-cut on the Task Bar. Neither do they start through the Start Menu. Why does this happen and what is the solution?

Have you tried using the task manager to see if Photoshop is hung and look at your windows reliability history to see if Photoshop CS5 an CS6 are crashing?

Firefox version 3.5.16 will not start under Windows Vista and Windows 7 32bit

I have a Windows Vista computer that will not start any newer version of Firefox than 3.5.16. The process will run (as seen in the Task Manager) but do nothing.
I have since updated Windows to version 7 and the problem persists.
I have tried uninstalling Firefox and all Addons (flash-player, pdf-reader) and deleting all files (even user-specific ones).
Firefox can't be started in Profilemanger or safe-mode either.
Is there anything short of reinstalling windows I can try?

Solved it!
It was a dodgy version of Firebug (1.6.2) running, which would kill the disable/update process. It was killing something on the first run that would corrupt my Firefox.
How I fixed it:
* Download the latest Firefox
* Install Firefox 4 (as Standard) in-place upgrade
* Before finishing, un-tick the "Run Firefox Now" button
* Hit Finish
* Find Firefox in the Start Menu and hold Shift and click the executable (safe mode)
* Leave everything disabled
* You should now have a working Firefox!
Remove/update your add-ons as needed. I only had to upgrade Firebug in safe mode to get it working.
Odd how the check for updates completely broke this Firefox, wonder what was so bad about Firebug.
Hope this helps at least one other person! The "Run in Safe Mode" option is so hard to discover now when your browser is broken!

PE 9 does not start on Windows 7 Ultimate 32 bit

No matter how I try to start PE 9, it does not start.
From Welcome Screen -> New Project: nothing happens. Form Elements Organizer -> File - New - Premiere Elements Video project it takes some time loading all modules, libraries and sorts of things until an error message appears saying that PE 9 does not function anymore.
That's all, no error log or something like this. Please let me know what info is needed.
PS: Why does my cursor jump to the beginning when I press enter in text editor here?

Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various
parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle...
this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video
editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows
(or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on
drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in
the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the
type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum
http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but
eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual
disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Application servers are developed in visual c++6.0 were not starting in windows server 2008.

Hi,
Some application servers are developed in visual c++ 6.0 are running windows server 2003 properly.when its running in 2008R2
these r not starting.we checked in security log just process creating and terminating with 0X2,it means file not found even not creating any application logs and not appearing in task manager,only in security log.I tried with command prompt[cmd] as administrator.its
not giving any error.
Anyone please help me what this starting problem issue in server 2008.any dependencies like dlls required.I tried multiple ways.

I think you are in the wrong forum - OCI questions (as opposed to OCI) should go here:
Oracle Call Interface (OCI)
Best of luck

Presentation services not starting,StartOC4J window closing automatically

Hi All,
After i create one repository,i started startOC4J but this window is opening and closing in few seconds automatically.Even the presentation services also not starting.
it is giving
"Windows couldn't start the Oracle BI Presentation server on Local computer.For more information,review the system event log.If this is a non-Microsoft service,Contact the service vendor, and refer to service-specific error code -1"
Can anyone help me plz...
Thanku

Reddy,
I'm sure you have messed up with your NQSConfig.INI file. Make sure, its pointing to the exact name of the new Repository that you have created under REPOSITORY Section like
[ REPOSITORY ]
Star = samplesales.rpd, DEFAULT;
And also, this RPD samplesales.rpd should be present in \OracleBI\server\Repository folder.
Cross-check your instanceconfig.xml file as well..
Hope this helps

Indesign Server CS4 service is not starting on Windows Server 2003 64bit

Hello guys,
I am not able to start Indesign Server CS4 service on windows Server 2003 SP2 64bit .
I have successfuly configured the service with InDesignServerService.msc, set the port to 18555. InDesignServerWinService the Log On option is set to "This Account". Also tried using different accounts!
When starting the indesign service from windows Service control panel I get this error:
Could not start the InDesignServerService x64 service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
Error log from windows Event viewer:
Error
Timeout (30000 milliseconds) waiting for the InDesignServerService x64 service to connect.
Indesign server application works if launching from command line with the specified port 18555.
If trying to lauch IndesignServerService.exe from command line, there is a delay and finally nothing happens.
I have also tried launching 32bit indesign server service and the same error comes.
Would be grateful for your thoughts!
Message was edited by: Andrewdev
Server specs:
Windows Server 2003
Standard x64 Edition
Service Pack 2
Intel Xeon CPU 3.00Ghz
9.76 GB of Ram
Server is running virtualy on Xen hypervisor, there is no antivirus and windows firewall is disabled.

Hi Chandi,
      If Microsoft fix is not working or it is too old to apply then go for manual process i.e.;
      In the Microsoft KB article follow this :-
     Services that use the local system account to log on to a Windows Server 2003-based computer start if the Allow service to interact with desktop
     option is turned on. To turn this option on, follow these steps:
In the Services tool, click the service that you want to start, and then click Properties.
Right-click the Log On tab, and then click to select the Allow service to interact with desktop check box.
Click OK to exit the Properties dialog box.
   This will solve your problem.
   Thanks,
   Akansh Upadhyaya,
   System Engineer,
   (Windows + Unix.)

Jrly is not starting on Windows XP?

Similar Messages

Maybe you are looking for