JRMC remote monitoring for web logic not working

Hi,
I am using Oracle 1031, and JRMC version 3.0.5. I have added following option to startWebLogic.cmd - JAVA_OPTIONS=”-Djava.rmi.server.hostname=host -Xmanagement:ssl=false,authenticate=true,autodiscovery=true,port=7091 export JAVA_OPTIONS"
I am able to see my weblogic JVM when I open JRMC in local and it is seen under Discovered --> Local. When i make a new connection in Local JRMC, it throws an exception - JAVA_OPTIONS=”-Djava.rmi.server.hostname=swperfap02 -Xmanagement:ssl=false,authenticate=true,autodiscovery=true,port=7091 export JAVA_OPTIONS"
Other than this, I am trying to access this JVM from a remote machine and it shows error "Unable to connect"
Please note that machine where web logic runs is in a different network compared to remote machine.
Can you please let me know what is wrong?
Thanks,
Krupa

hi Kal,
Yes i made authentication false.
This is the configuration i used:
Oracle 1031
JRMC version 3.0.5
JAVA_OPTIONS=”-Xmanagement:ssl=false,authenticate=false,autodiscovery=true,port=7009 "
On the local I am able to see this JVM under JDP and able to make a new connection to it also.
Other than this, when I am trying to access this JVM from a remote machine and it shows following exception:
Could not open Management Console for SWPERFAP02.DOMAIN.STEELWEDGE.COM:7009.
com.jrockit.mc.rjmx.ConnectionException: Exception creating connection to: 169.254.217.151; nested exception is:
java.net.SocketException: Network is unreachable: connect
com.jrockit.mc.rjmx.ConnectionException: Exception creating connection to: 169.254.217.151; nested exception is:
java.net.SocketException: Network is unreachable: connect
at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:64)
at com.jrockit.mc.console.ui.handlers.StartConsoleHandler$1.preConnect(StartConsoleHandler.java:38)
at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:75)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
Caused by: java.rmi.ConnectIOException: Exception creating connection to: 169.254.217.151; nested exception is:
java.net.SocketException: Network is unreachable: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:614)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:110)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2327)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:277)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:653)
at com.jrockit.mc.rjmx.internal.RJMXConnection.establishConnection(RJMXConnection.java:613)
at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:582)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:189)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.establishConnection(DefaultConnectionHandle.java:92)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.connect(DefaultConnectionHandle.java:117)
at com.jrockit.mc.rjmx.ConnectionManager.innerConnect(ConnectionManager.java:91)
at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:62)
... 3 more
Caused by: java.net.SocketException: Network is unreachable: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:110)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2327)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:277)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:652)
at com.jrockit.mc.rjmx.internal.RJMXConnection.establishConnection(RJMXConnection.java:613)
at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:582)
at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:188)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.establishConnection(DefaultConnectionHandle.java:92)
at com.jrockit.mc.rjmx.internal.DefaultConnectionHandle.connect(DefaultConnectionHandle.java:116)
... 5 more
Please note that machine where web logic runs is in a different network compared to remote machine.
Can you please let me know what is wrong?
Thanks
Krupa

Similar Messages

LT2223 ThinkVision Monitor - Inbuilt Web Camera not working

Hi
I am using a LT2223zwC monitor which has a built in Web Camera but does't seems to be working - Skype cannot detect the camera and I have no idea how to get it work. Tried the Lenovo Web Conferencing from Control Panel, it only allows me to adjust the Speaker and Mic.
Any assistance is much appreicated.
Many thanks.
Gilar

Thanks For Information..
But I Am Using Microsoft Lifecam Studio Download Latest Software Microsoft life cam Version 4.25.512.0
This Is Not A Driver Issue This is Application Issue Or Windows 8.1 Issue
I Check 3 Different Camera but Any camera Not Working
I Check 3 Different Pc..
But In Windows 8.1 That Thing Not Work !
But This Thing Working Ok With Windows8
This Is Majjor Issue Of Microsoft Windows8.1
If I Download Other Store App Like Cammix The Software Give Me Hint..
Showing Me Error Like..
"windows.media.capture"media
capture is not registered, (This Error
Is Showing In Cammix Application)
And Microsoft Have To Provide Something To As...
Thank You For Support....

App Insights for web application not working when deployed to Dev server

App Insights is not sending telemetry data for ASP.NET MVC web *requests* (page views from the JS instrumentation are fine) when the app is deployed to the Dev or Test IIS servers. On local IIS express it works perfectly fine. I have
no idea how to troubleshoot this problem.
Bert Jackson

- the AI.config file is both in the root of the site, and the /bin folder (which was confusing the other day). Both are correct.
- it looks like a local browser can go to https://dc.services.visualstudio.com (it results in a 403 since its just a GET to the root). During this test, I found that this server did NOT have the Root trust certificate (Baltimore cybertrust), which
would cause problems when using IE locally to browse the app; the javascript AI logging was not working, because it couldnt fetch the ai.0.js file). I got the proper root certificate installed on the server, but request logging still not working. I
dont believe the firewall is a problem.
- I've verified that all binaries are indeed deployed in to the bin folder on the server
- web.config does have the AI http module; I've verified via logging that the ApplicationInsightsWebTracking is loaded. However, I have custom Context/Telemetry initializers, and their Initialize() methods are *NOT* being called when deployed on the
server. I've tried both ways of registering the initializers; via code in the Application_Start() event and also in the ApplicationInsights.config file.
I don't know how to troubleshoot any further, to figure out if AppInsights is actually *trying* to send telemetry out and failing, or if its not actually even trying.
Bert Jackson

Save For Web is not working

I just had my software updated from CS to CS5 (I'm in a new job and asked for this upgrade) and now when I go to Save For Web I get the following:
Error
The operation could not be completed
The system cannot find the path specified
Notes:
- This wasn't an issue before the upgrade
- I tried pulling the files off of the server and working from the desktop, no go
- I'm working on a PC but am a Mac user, therefore system q's are going to be tough for me to answer

It may be that the plug-in isn't reporting a problem with the path of the file, but some other path (e.g., to a temporary folder or scratch disk).
Double check (or have your system guru check) that the folder identified by the TEMP environment variable can be written/read by your account on the computer. Make the same check for the root folder(s) of the hard drive(s) identified as scratch drives in Edit - Preferences - Performance.
-Noel

Save for web & devices not working (CS4)

I noticed today that I can't save for web & devices any more. when I try it shuts down the program and gives me the following message to send a crash report:
Adobe has detected that the application Adobe Illustrator CS4 has unexpectedly quit.
this started as a Photoshop CS4 problem where I also can't save for web & devices any more. before people jump down my throat again for mentioning this Photoshop problem on the Illustrator forum - this is for context only. I have the same problem in both applications. I just include this information here in case it helps. the Photoshop message I get is:
The operation can not be completed.
savign for web & devices worked totally fine up till last night in Photoshop. haven't saved anything out of Illustrator for web & devices in a while but it used to work just fine.
I have a PC and use Windows 7. All my Adobe products are up-to-date.
Any help is much appreciated. Thx a lot!

thank you very much. at least it happened before. I was seriously doubting myself. tried trashing preference files multiple times, but that didn't help. will reinstall everything and see if that does the trick.
thanks again!

Save for Web Matte Not Working?

Hi everyone,
I'm having problems with the Matte settings in the Save for Web section to create a smooth transparent .gif image. None of the black matte is showing up in the zoomed preview (picture attached), nor is it saving when I render the file. The adjusted transparent image still appears with the white jagged halos on a black web page background, even though I set a black matte. Any clues as to what I'm doing wrong? Thanks for any help.

Sorry, I haven't used the matte feature of Save for Web, so I can't help you there. (I only save in PNG format.)
This is an interesting question, though, and I spent a few hours working on it -- I'm still assuming that you're starting with a logo supplied as a bitmap image (GIF or JPG) on a white background and want to clean it up so it works on a black background.
FWIW, here are my thoughts:
I found a logo on the Web to use for practice:
This is a tough example which has a lot of problems, as you can see from this enlargement:
The colours "bleed" when next to each other, the colour areas have darkened edges, the colours (and even the white background) are "splotchy" and not uniform, the edges are anti-aliased and have multiple colours in 'em, and so on.
The fact is that a supplied image like that is only suitable for use as a guide for completely re-creating the logo.
You have two choices for re-creating it:
Work on it as a bitmap image.
Work on it as a vector drawing.
Either way, you're going to do a lot of handwork. I haven't found a way to automatically correct the problems that I mentioned.
If you work on it as a bitmap in PSE, you'll wind up re-drawing by hand each pixel (or each edge of a colour selection, which amounts to about the same thing).
What I wound up doing is using a vector drawing program (CorelDraw, since I can't afford Illustrator) to recreate the logo. Even though I'm quite rusty, it didn't take too long to use the Bezier curve tool to create the coloured shapes. I simply used CDR's bitmap trace tool to vectorize the type. Once I had the vector drawing, everything is wonderful because vector shapes are resolution and size independent. It was a snap to export the drawing for the Web as a transparency-enabled PNG image without anti-aliasing, reducing it by 85%:
Hope these thoughts help....
Ken

Ps 3d and filters and save for web are not working the way they should

At work we just put cs6 on a w7 machine running 64 bit which has more than that required mem and or ram to run cs6 - unfortunately I have to use a windows based machine at work (cheapskates). Anyways. I see the 3d menus and the filter menu in PS but they aren't funtional. The filter menu drop down is there but Liquify is the only one that shows up the rest are gray. The option to choose 3d is also there but they are not functional (grayed out) - I took a look at some online tutorials on using the 3d effect in PS CS6 and Ive gone through it a few times and it still won't work for me. Also, in illustrator when I save for web - when I adjust the pixel dimensions and move the mouse over and click on the image that I am saving for web nothing happens and I'm completely boggled about how to get the image size to change in the save for web pane. Typically I am used to being able to input the the number into the pixel dimenion field and click on the image and the image resizes (on a mac you can either click on the image or hit return and the image will resize in front of your eyes!). I am unable to get this to work the way I am used to, this happens for me in both ill5 and ill6 on this piece of crap windows machine. Maybe I just need to reinstall? Maybe adobe has changed the way this works? Maybe a sledge hammer into this windows machine would solve all my problems!? IDK. someone help... help me... pleeeeaaaaaaaaaaasssseeeee

unfortunately I have to use a windows based machine at work (cheapskates).
This gets a "stupid comment of the day" medal. Seriously. These days Macs are just as convoluted and effed up as Windows was a few years ago - nice as long as everything works, but god forbid you have a problem. So by all means, update your graphics driver and be glad that you actually have that choice rather than having to wait half a year for Apple to fix it...
Mylenium

Elements 10 - "Save for Web" function not working.

No response when clicked. Menu closes. That's all. As far as I know, everything else is fine. Using Win7-Home Prem.

Ken --
First of all thank you for taking an interest in this problem.
Honestly, I'm not sure if it ever worked. I've used the function but I'm not sure if the last time I used it I was using Elements 8 or Elements 10. Sorry.
Yes, I have installed additional plug-ins and filters a few of which I found on the internet. Are there any that you know of that could cause Save for Web to stop? I'm guessing yes or you wouldn't have asked.
The file you asked about is there in the folder specified.
Chet (aka Clear Lake Sailor)

"Save for Web" does not work with mac OS 10.6

Everything else runs fine with PSE 6 and OS 10.6, but nothing (!) happens when choosing "Save for Web" (German Version).

Here are the directions for PSE 6 in general:
http://forums.adobe.com/thread/422596?tstart=30
and for save for web:
Finally, to make the Save For Web work, you must do the same thing as above (which is make a folder owner be a non-admin account, and fix the read/write so that in 10.4 the You can says Read & Write). The folder to change with the "command i" get info is :
/Library/Applications Support/Adobe/Photoshop Elements/File Agent/6.0/en_US.
Once this en_US file is owned by a non-admin account and the Read & Write is set, and the padlock is unlocked, the Save For Web works.

Save for web preview not working in Photoshop CS4

Hello all.
I'm having a problem with Save for Web in Photoshop 11.0.2. Basically, whenever I move to save an image using "Save for Web & Devices," the preview window is stuck in GIF mode. I can move the Preset settings to any of the choices, and also change to any of the 5 image types underneath, but only a GIF setting at 100% dither/Selective palette/256 colors preview will show in the preview window.
I have trashed both the Adobe Save for Web 11.0 Prefs and the com.adobe.Photoshop.plist files, and have repaired permissions, but this doesn't resolve the problem.
Thanks in advance for any advice you can offer.
--jody radzik.

I fixed the problem by erasing "Save for Web" from within Photoshop rather than outside in the file tree.

Save for Web & Devices Not working

I am in the middle of creating a new web page using CS5 - sliced the components of the page and saved via Web and Devices as an html page.
Now when I want to go and save an ordinary jpg to post on my blog,via Web and Devices it only gives me the option of saving as an html file and there are no options to save as jpg or any other format.
Any clues as to how to reset the Save for Web and Devices setting so I can save in any other format other than html?

1.
2.
3.
-Noel

Hot Fix for Skip Logic not working on mobile devices. Me 1 - Adobe Support 0!

This is just a tip to anyone having the same issue. It seems that most mobile devices cannot process Skip Logic rules tied to a dropdown menu option. It is important to know if you never tested this on a mobile device for youself so I strongly encourage that you check this on both Android and iPhone. The single and multi selections DO work so that is the way to get around this issue. Here is a sample of our actual web application www.gmcloans.com/quickquote.html with the functional fields. I created a simple sample test application https://adobeformscentral.com/?f=n8qBqcnKMxR5mRmbAPwkqQ (with QR code for quicker access if you're not on a device now) utilizing all of the selection features for you to test with other devices to help save you the time I lost.
Pro: It works.
Con:
Lost time...searching for this only forum (at least that I could find) with a solution and having rearranging your application.
Uniformity and compaction....If you have a long dropdown list dependent on Skip Logic rules you will have to get confortable with having a lot more information spralled across your application.
Adobe Support...To my frustration I had to spend two (2) 20+ minute phone calls with support about this issue only for them to tell me that they don't have a fix and never had anyone express this particular conflict issue with them.
I hope this helps you.
Brian Taylor

I am still trying to find a version of your device here. The closest I got was a HTC Inspire 4G /w Android 2.3 and the skip logic on the dropdown worked correctly. I'll get back to you once I get to try it on a HTC DNA /w Android 4.1.1.
Meanwhile were you able to try your form on any other mobile device? I know that you want this to work on your device and we will fix this if there is a bug there... but I'm just curious if you were able on your side to see it work on a mobile device at all.
Gen

Slice saved for web buttons not working on web display

Hello,
I am essentially a novice photoshop user, going through the Classroom in a Book for CS6 (which has been surprisingly disappointing). I have come to the chapter where you are directed to make slices and turn them into navigation buttons with html. Then, you save for the web and optimize, save as HTML and images, and when I open the page up (both in chrome and firefox), none of the buttons work, the links all say "image does not exist." I think I'm missing a crucial step somewhere linking the pictures to the html (or something) I gave them, but I can't figure out what it is, and of course in the bare-bones text provided by Adobe itself, there is no mention of it or troubleshooting for if it doesn't work.
will give it another go and try with my own images (instead of ones downloaded from the accompanying cd), see if that makes a difference. But appreciate any help! thanks

Hello RunN2Poles.
Please, check this document.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01798629&cc=us&dlc=en&lc=en&product=3737195&tmp...
Cheers!!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Content Search Web Part not work for Office Web Apps

Hi ,
In Content Search Web Part word documents are not able to open in browser,but in document library its working.
Office Web Apps not work in Content search web part
Please help me
Regards
Sachin

Below is the display template to open the document in OWA.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>AdSpace Picture on top, 3 lines on bottom</title>

</head>
<body>

<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>

<div id="Item_PictureOnTop">

<div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
<div class="top-content-img" id="_#= pictureContainerId =#_">
<a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
_#= pictureMarkup =#_
</a>
</div>
<h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>
<span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>
</div>
</div>
</body>
</html>
Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
Problem solved.
Nehal Bhandari,ATL, Nagarro Softwares

Remote for Tv anywhere not working

My new remote from the box will not work but everything else works fine. Any Ideas how to make my remote work?

My remote doesn't work either. It hasn't worked period. I returned the previous tuner and got a new one, but it still doesn't work. I have windows xp pro corp. on an IBM T40p. I don't know what to do... cept maybe pull my hair out? The jog dial on the side also doesn't work. Please help? Thanks

JRMC remote monitoring for web logic not working

Similar Messages

Maybe you are looking for