JRun Connector Protocol Error
If the server gets a requests that are less than 15 seconds
apart, I get the following error:
Server Error
The server encountered an internal error and was unable to
complete your request.
JRun Connector Protocol Error
Where can I look for more specific information?
My htdocs is on another server.
This TechNote may help.
(See 56969)
Similar Messages
-
Graceful Restart of Apache Causes JRun Connector Protocol Error
Can anyone shed some light on how I can get Apache to do a
graceful restart without causing a JRun Connector Protocol error.
If I run a ColdFusion page that basically loops through a set
of numbers and then issue a "kill -SIGUSR1 `cat
/var/run/httpd.pid`" command then I receive the following error:
Server Error
The server encountered an internal error and was unable to
complete your request.
JRun Connector Protocol Error.
Can anyone shed some light on how I can avoid this error?
Thanks,
JohnAnd what happens on Apache 1.3?
Thanks in advance,
Lopato -
We've migrated from ColdFusion MX 6.1 to 8 recently and we're
seeing an alarming number of error messages like these:
Server Error
The server encountered an internal error and was unable to
complete your request.
JRun Connector Protocol Error.
We're running:
Cold Fusion 8,0,1,195765 64-Bit
Solaris 10
Apache 2.2.10
JRun Connector mod_jrun22.so
JDK 1.5.0_16 (we downgraded the JVM as a potential fix)
Oracle JDBC drivers 11.1.0.6.0 for JDK 5 (we need Oracle 11g
database support)
We've spent several days investigating this now. The only
patterns seem to be that:
-happens a little bit more after a server restart
-can return the error very quickly on random pages
-but can also return the error on pages that are running big
queries and take a long time to run
-very inconsistent, we can call the same page multiple times
at once - some requests fail, others succeed
-we are also seeing a lot of java.io.EOFException errors in
our cfserver.log with stack traces of some kind
-the logs don't point in any parcticular direction, nor do
the JRun Connector errors seem to coincide with any logs entries
What we've tried to do to fix this:
-Tried the built-in Adobe Oracle database drivers
-Tried the JDK 5 version of the Oracle 11.1.0.6.0 database
drivers
-Downgraded the JVM used by Cold Fusion 8 to JDK 5.
-Adjusted the data source connection pools timeouts; turned
off Maintain Connections altogether just to see if it made a
difference
-Adjusted template caching settings
-Tweaked the 3 or 4 JRun Connector timeout settings in
Apache. Also turned on verbose mode on the JRun Connector to see if
that revealed anything. Saw a few suspicious entries, such as:
jrApache[init] 127.0.0.1:51800 destroying/closing socket [35]
error 0
jrApache[init] jrCloseSocket [35]
But these did not parallel all of the JRun connector errors
we've been seeing.
-Tried connecting to only one database node at a time (we
have an Oracle cluster)
-Verified our JDBC connection string
-Tried reproducing this error under previous Cold Fusion 6.1
production servers and in development environment, but didn't have
any luck
-Even tried cleaning up the linebreak characters in some of
our code after vi complained about "premature end of file" or
"premature end of line" - no luck.
We're pulling our hair out at this point. The only other
thing we've suspected is a firewall or loadbalancer issue causing
us to lose connections. HELP!!!!Hello,
we also have got the same error and also very sporadic.
We're running:
Cold Fusion 8,0,1 32-Bit
Window 2003 Server
Apache 2.0.63
JRun Connector mod_jrun20.so
JDK 1.6.0_04
ms sqlserver 2005
on VMWare
The error occures on different installations and different
machines. allways on vmware.
when it happens nothing helps any more.
- restarting apache - no effect
- restarting jrun - no effect
- restarting both - no effect
- killing all apache and jrun processes and restart - no
effect
and the system does not recover by itself.
only restarting the vmware helps...
sometimes even the jdbc connection to our mssqlserver 2005
ist not available anymore.
message: socket write error.
seems to be something very deep in the system, but we could
not figure out what.
we got the same
"destroying/closing socket"
error in our apache log files.
seems to happen more often if cpu is on load, or if more
threads are running but we are not able to reproduce it at all...
help please! -
Vibe connector .6210.
The following error is recorded in the default.pipeline.vibe-Application
log.
URLError: <urlopen error [Errno 1] _ssl.c:482: error:140770FC:SSL
routines:SSL23_GET_SERVER_HELLO:unknown protocol>
Obviously this is a protocol error, but what is it actually telling me?
Besides the fact that the connector never completes startup.
JoeKOriginally Posted by JKress
Vibe connector .6210.
The following error is recorded in the default.pipeline.vibe-Application
log.
URLError: <urlopen error [Errno 1] _ssl.c:482: error:140770FC:SSL
routines:SSL23_GET_SERVER_HELLO:unknown protocol>
Obviously this is a protocol error, but what is it actually telling me?
Besides the fact that the connector never completes startup.
JoeK
Have not setup the Vibe connector before... so not sure. But it could be that there is an issue with the supplied SSL certificates, or the site is not listening on 443 (hinting to Vibe defaulting to 8080 and 8444).
Have you set the 8443 port and if not, if port 443 listening for Vibe services?
Cheers,
Willem -
B-channel oos and protocol error 510
Dear all,
I have some some issue couple of days ago. The telephony system of my client worked well and suddenly the cannot make external calls via E1. I checked the config and for me it seems to be ok. When I checked the SDL file, I can see the B channel out of service error message following by the
"MGCP PROTOCOL ERROR: <S1/SU1/DS1-0/[email protected]> CRCX error code: 510". They have A CUCM 6.0 and Cisco 2821 as gateway with 12.4 (25f) advance IP service IOS.
I perform the following actions without success:
-From the CUCM in the advance service I forced the Bchannel to bring it in service,
- no mgcp/mgcp, -reboot the CUCM and the Gateway,
-reset the controller throug CUCM,... in vain.
They contacted telco and has confirm that everything seems to be ok. Find below the information that can help you to undestand better
#sh run brief
Building configuration...
Current configuration : 4859 bytes
version 12.4
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname ATD-CCM-GW
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 debugging
aaa new-model
aaa authentication login default local
aaa authentication login local_authen local
aaa authorization exec default local
aaa authorization exec local_author local
aaa session-id common
clock timezone A 1
network-clock-participate slot 1
network-clock-select 1 E1 1/1/0
ip cef
ip domain name xx.xxxx.xxx
ip host ATD-CCM1 10.10.10.100
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
isdn switch-type primary-net5
isdn logging
voice-card 0
dspfarm
dsp services dspfarm
voice-card 1
no dspfarm
no voice call carrier capacity active
voice rtp send-recv
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729br8 bytes 40
voice class h323 1
h225 timeout tcp establish 3
crypto pki trustpoint TP-self-signed-635937996
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-635937996
revocation-check none
rsakeypair TP-self-signed-635937996
crypto pki certificate chain TP-self-signed-635937996
certificate self-signed 01
application
service alternate Default
controller E1 1/1/0
framing NO-CRC4
pri-group timeslots 1-31 service mgcp
interface GigabitEthernet0/0
description to_CCM
ip address 10.10.10.254 255.255.255.0
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial1/1/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn overlap-receiving
isdn incoming-voice voice
isdn bind-l3 ccm-manager
isdn bchan-number-order ascending
isdn sending-complete
no cdp enable
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 10.10..253
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
logging trap debugging
control-plane
voice-port 1/0/0
timing hookflash-out 50
voice-port 1/0/1
signal groundStart
timing hookflash-out 50
voice-port 1/0/2
signal groundStart
timing hookflash-out 50
voice-port 1/0/3
signal groundStart
timing hookflash-out 50
voice-port 1/1/0:15
ccm-manager fallback-mgcp
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server ATD-CCM1
ccm-manager config
mgcp
mgcp call-agent 10.10.10.100 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp modem passthrough voip redundancy
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package fxr-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
no mgcp explicit hookstate
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
mgcp profile default
dial-peer voice 999101 pots
service mgcpapp
port 1/0/1
forward-digits all
dial-peer voice 999102 pots
service mgcpapp
port 1/0/2
forward-digits all
dial-peer voice 999103 pots
service mgcpapp
port 1/0/3
forward-digits all
dial-peer voice 1 pots
service mgcpapp
incoming called-number .
direct-inward-dial
port 1/1/0:15
forward-digits all
dial-peer voice 999100 pots
service mgcpapp
port 1/0/0
gateway
timer receive-rtp 1200
scheduler allocate 20000 1000
ntp clock-period 17180351
ntp update-calendar
ntp server 10.10.10.9 source GigabitEthernet0/0
end
#sh controller e1
E1 1/1/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20090113, FPGA: 20, spm_count = 0
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
Current port master clock:recovered from backplane
Data in current interval (225 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 3 15 minute intervals):
0 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
#sh ccm-manager
MGCP Domain Name: ATD-CCM-GW.xx.xxxx.xxx
Priority Status Host
============================================================
Primary Registered 10.10.10.100
First Backup None
Second Backup None
Current active Call Manager: 10.10.10.100
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 15:31:24 UTC Oct 19 2012 (elapsed time: 00:00:09)
Last MGCP traffic time: 15:31:24 UTC Oct 19 2012 (elapsed time: 00:00:09)
Last failover time: None
Last switchback time: None
Switchback mode: Graceful
MGCP Fallback mode: Enabled/OFF
Last MGCP Fallback start time: None
Last MGCP Fallback end time: None
MGCP Download Tones: Disabled
TFTP retry count to shut Ports: 2
Backhaul Link info:
Link Protocol: TCP
Remote Port Number: 2428
Remote IP Address: 10.10.10.100
Current Link State: OPEN
Statistics:
Packets recvd: 11
Recv failures: 0
Packets xmitted: 18
Xmit failures: 0
PRI Ports being backhauled:
Slot 1, VIC 1, port 0
Configuration Auto-Download Information
=======================================
Current version-id: 1350042385-8bfc9ed0-f85e-4435-8baf-3ad1ceefb55c
Last config-downloaded:00:00:00
Current state: Waiting for commands
Configuration Download statistics:
Download Attempted : 1
Download Successful : 1
Download Failed : 0
TFTP Download Failed : 0
Configuration Attempted : 1
Configuration Successful : 1
Configuration Failed(Parsing): 0
Configuration Failed(config) : 0
Last config download command: New Registration
Configuration Error History:
controller E1 1/1/0
no pri-group timeslots 1-31
FAX mode: disable
#debug isdn q931
#debug mgcp packet
009112: Oct 20 12:48:50.374: MGCP Packet received from 10.10.10.100:2427--->
CRCX 2359 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9aa000000F500000001
X: 1f
L: p:20, a:PCMU, s:off, t:00
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
009113: Oct 20 12:48:50.382: MGCP Packet sent to 10.10.10.100:2427--->
200 2359 OK
I: 8
v=0
c=IN IP4 10.10.10.254
m=audio 18274 RTP/AVP 0 100
a=rtpmap:100 X-NSE/8000
a=fmtp:100 192-194
<---
009114: Oct 20 12:48:50.386: ISDN Se1/1/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x4636A628 datasize = 64
009115: Oct 20 12:48:50.386: ISDN Se1/1/0:15 Q931d: data =
009116: Oct 20 12:48:50.386: 4636A628000000030240043800010000
009117: Oct 20 12:48:50.386: 0802000105A104038090A31803A9839F
009118: Oct 20 12:48:50.386: 280B526F6C616E64202D2049546C0601
009119: Oct 20 12:48:50.386: 81313232307009803636393332313933
009120: Oct 20 12:48:50.386:
009121: Oct 20 12:48:50.434: MGCP Packet received from 10.10.10.100:2427--->
MDCX 2360 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9aa000000F500000001
I: 8
X: 1f
L: p:20, a:PCMU, s:off, t:b8, fxr/fx:t38
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
009122: Oct 20 12:48:50.438: MGCP Packet sent to 10.10.10.100:2427--->
510 2360 fx: setting cannot be supported
<---
009123: Oct 20 12:48:50.438: ISDN Se1/1/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x4636A628 datasize = 25
009124: Oct 20 12:48:50.438: ISDN Se1/1/0:15 Q931d: data =
009125: Oct 20 12:48:50.438: 4636A628000000030240043800010000
009126: Oct 20 12:48:50.438: 0802000145080280AF
009127: Oct 20 12:48:50.462: MGCP Packet received from 10.10.10.100:2427--->
DLCX 2361 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9aa000000F500000001
I: 8
X: 1f
S:
<---
ATD-CCM-GW#
009128: Oct 20 12:48:50.478: MGCP Packet sent to 10.10.10.100:2427--->
250 2361 OK
P: PS=0, OS=0, PR=0, OR=0, PL=0, JI=0, LA=0
<---
009129: Oct 20 12:48:50.478: ISDN Se1/1/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x4636A628 datasize = 21
009130: Oct 20 12:48:50.478: ISDN Se1/1/0:15 Q931d: data =
009131: Oct 20 12:48:50.478: 4636A628000000030240043800010000
009132: Oct 20 12:48:50.478: 080200015A
ATD-CCM-GW#
009133: Oct 20 12:49:03.002: MGCP Packet received from 10.10.10.100:2427--->
CRCX 2362 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9ac000000F500000002
X: 1e
L: p:20, a:PCMU, s:off, t:b8, fxr/fx:t38
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
#sh mgcp statistics
UDP pkts rx 270, tx 270
Unrecognized rx pkts 0, MGCP message parsing errors 0
Duplicate MGCP ack tx 0, Invalid versions count 0
CreateConn rx 10, successful 1, failed 9
DeleteConn rx 1, successful 1, failed 0
ModifyConn rx 1, successful 0, failed 1
DeleteConn tx 0, successful 0, failed 0
NotifyRequest rx 0, successful 0, failed 0
AuditConnection rx 0, successful 0, failed 0
AuditEndpoint rx 61, successful 61, failed 0
RestartInProgress tx 4, successful 4, failed 0
Notify tx 193, successful 193, failed 0
ACK tx 63, NACK tx 10
ACK rx 197, NACK rx 0
IP address based Call Agents statistics:
IP address 10.10.10.100, Total msg rx 270,
successful 260, failed 10
System resource check is DISABLED. No available statistic
DS0 Resource Statistics
Utilization: 0.00 percent
Total channels: 34
Addressable channels: 34
Inuse channels: 0
Disabled channels: 0
Free channels: 34
sh controller e1
#sh network-clocks
Network Clock Configuration
Priority Clock Source Clock State Clock Type
1 E1 1/1/0 GOOD E1
10 Backplane GOOD PLL
Current Primary Clock Source
Priority Clock Source Clock State Clock Type
1 E1 1/1/0 GOOD E1
Thanks for your helpThe explanation for your syslog message is " The B-channel indicated by this alarm has gone out of service. Some of the more common reasons for a B-channel to go out of service include: Taking the channel out of service intentionally to perform maintenance on either the near- or far-end; MGCP gateway returns an error code 501 or 510 for a MGCP command sent from Cisco Unified Communications Manager (Unified CM); MGCP gateway doesn't respond to an MGCP command sent by Unified CM three times; a speed and duplex mismatch exists on the Ethernet port between Unified CM and the MGCP gateway"
Recommended action:
Check the Unified CM advanced service parameter, Change B-channel Maintenance Status to determine if the B-channel has been taken out of service intentionally; Check the Q.931 trace for PRI SERVICE message to determine whether a PSTN provider has taken the B-channel out of service; Reset the MGCP gateway; Check the speed and duplex settings on the Ethernet port. -
XI protocol error occurred in abap proxy scenario- plz
Scenario is asynchronous
Http -> XI ->R/3(abap server proxy)
sender: Through http client
receiver is abap server proxy
<u>Repository objects:</u>
Sender: sender_DT, sender_MT, sender_MI(outbound asynchronous)
Receiver: imported RFC from R/3 client 550, receiver_MI(which has message type refered to the imported RFC)
Interface mapping: source=sender_MI, receiver_MI.
Proxy generated on R/3 client 550 for receiver_MI.
<u>Configuartion objects:</u>
Sender: business service, no comm channel since http sender.
receiver: R/3 business system
Comm channel: receiver_cc type of XI.
transport protocol: http
message protocol : XI 3.0, since both XI and R/3 on webas 6.4
addressing type: URL
target host: diamond
service number: 8005
path: /sap/xi/engine?type=entry
Authentiction data:
user name: user22
passwrod; correct
logon client: 400 which is the same client I developed ll the design and config objects.
Recevr determinaion, interface determination and recevr agrrement looks fine.
The error iam getting is:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">LOOP_IN_MESSAGE_ROUTING</SAP:Code>
<SAP:P1>is.05.diamond</SAP:P1>
<SAP:P2>IS</SAP:P2>
<SAP:P3>XI</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XI protocol error occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
<b>
Please reply , your help is appreciated.</b>
Thanks
KKStefan thanks,
I tried as you suggesetd putting the info of R/3 for
server: diamond
port: 8005
client: 550
user id: user05
pwd: correct
But I get the below error, suggest me what permission should this userid have?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"><html><head><title>Logon Error -
Fatal two-task communication protocol error (when using db link)
I have created the db link betwen two databases of oracle version 9i 9.0.2
the db link connects to specific user
when i access the table with same name as user then recieve following message
ORA-03106: fatal two-task communication protocol error
when i access the other tables having different name that the user to which the db link connects
that works alright
so what is solution of problem in this particular case?What is your Oracle release? Is it 9.0.1.2 or 9.2.0?
What version of Sql*Plus client are you using? -
ORA-27023: skgfqsbi: media manager protocol error
can some one please tell me what to do regarding this error, and how can i solve it. the result log is stated below...
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Oct 16 15:26:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
connected to target database: MOT (DBID=2759813257)
using target database control file instead of recovery catalog
RMAN>
echo set on
RMAN> run {
2> allocate channel oem_sbt_backup type 'sbt_tape' format '%U';
3> backup as BACKUPSET current controlfile tag '10162007032648';
4> restore controlfile validate from tag '10162007032648';
5> release channel oem_sbt_backup;
6> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on oem_sbt_backup channel at 10/16/2007 15:26:50
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> allocate channel for maintenance type 'sbt_tape' ;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ORA_MAINT_SBT_TAPE_1 channel at 10/16/2007 15:26:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> delete noprompt backuppiece tag '10162007032648';
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=125 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 10/16/2007 15:26:51
RMAN-06168: no backup pieces with this tag found: 10162007032648
RMAN> exit;
Recovery Manager complete.can some one please tell me what to do regarding this error, and how can i solve it. the result log is stated below...
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Oct 16 15:26:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
connected to target database: MOT (DBID=2759813257)
using target database control file instead of recovery catalog
RMAN>
echo set on
RMAN> run {
2> allocate channel oem_sbt_backup type 'sbt_tape' format '%U';
3> backup as BACKUPSET current controlfile tag '10162007032648';
4> restore controlfile validate from tag '10162007032648';
5> release channel oem_sbt_backup;
6> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on oem_sbt_backup channel at 10/16/2007 15:26:50
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> allocate channel for maintenance type 'sbt_tape' ;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ORA_MAINT_SBT_TAPE_1 channel at 10/16/2007 15:26:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> delete noprompt backuppiece tag '10162007032648';
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=125 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 10/16/2007 15:26:51
RMAN-06168: no backup pieces with this tag found: 10162007032648
RMAN> exit;
Recovery Manager complete. -
Important!!! ldap_rename_s: Protocol error with ldapmoddn
When I use "ldapmoddn" to move a user in Active Directory, I have the error:
"ldap_rename_s: Protocol error
ldap_rename_s: additional info: 00000057: LdapErr: DSID-0C09080A, comment: Error in attribute conversion operation, data 0, v893"
And the command line is:
ldapmoddn -p 389 -h 190.57.160.24 -D "CN=administrateur,CN=USERS,DC=xxx,DC=org" -w taaze -b "CN=a,OU=test,dc=xxx,dc=org" -N "dc=xxx,dc=org"
But the user have minimum information...
It's very important for me because it's for my training periode to validate my master!!
Thanks you very much...If I use only the -N option without -R option
ex:ldapmoddn -p 389 -h 190.57.160.24 -D "CN=administrateur,CN=USERS,DC=xxx,DC=org" -w xxx -b "CN=a,OU=test,dc=xxx,dc=org" -N "dc=xxx,dc=org"
I have this error:
"ldap_rename_s: Protocol error
ldap_rename_s: additional info: 00000057: LdapErr: DSID-0C09080A, comment: Error in attribute conversion operation, data 0, v893"
Can you help me please?????
Matthieu -
TT12241: Backup stream protocol error
Hi there,
I get the following error when replicating TT 6.04 datastore:
$ /data/TimesTen/6.04/bin/ttRepAdmin -duplicate -from UsageCollector -host NODE_B -setMasterRepStart -delXla -localhost NODE_A UsageCollector
TT12241: Backup stream protocol error: bad log data packet length -- file "restore.c", lineno 2865, procedure "restoreLogFileNS"
Unfortunately this error, TT12241, is not described in the documentation. Oracle Support and Google searches don’t return any relevant information.
Have any one came across this problem before?
Thanks,
IgorI can't find any previous SR reports of the TT12241. No probable candidate bugs are returned either. However I have not seen the -delXla option being used before, so it may have something to do with using this option. Are you able to exclude this option from the ttRepAdmin -duplicate, and allow the bookmarks to be copied over? You could then connect to the newly created datastore and try to manually delete the bookmarks using "xladeletebookmark".
-
Hi All,
Here is the scenario. Trading Partner (TP) A is sending a RosettaNet business
message (PIP3A2) to TP B. When the weblogic Integration server for TP B receives
this message, I get the following error message,
####<Dec 4, 2001 4:00:33 PM PST> <Error> <B2B> <erpsystem> <myserver> <ExecuteThread:
'9' for queue: 'default'> <> <19:c285badb981bb8b8> <000000> <<RN-Protocol> ERROR:
Cannot locate CA for URI http://localhost:7001/Quantum, Business Identifier 987654321,
Role Product Supplier, in Coversation 3A2, version 1.3.>
It is referring to Conversation 3A2 eventough it has been deleted and should be
using the Conversation called PIP3A2. Can anyone tell me where and how this conversation
is referenced and how it can be fixed?
--Krish.Hi All,
Here is the scenario. Trading Partner (TP) A is sending a RosettaNet business
message (PIP3A2) to TP B. When the weblogic Integration server for TP B receives
this message, I get the following error message,
####<Dec 4, 2001 4:00:33 PM PST> <Error> <B2B> <erpsystem> <myserver> <ExecuteThread:
'9' for queue: 'default'> <> <19:c285badb981bb8b8> <000000> <<RN-Protocol> ERROR:
Cannot locate CA for URI http://localhost:7001/Quantum, Business Identifier 987654321,
Role Product Supplier, in Coversation 3A2, version 1.3.>
It is referring to Conversation 3A2 eventough it has been deleted and should be
using the Conversation called PIP3A2. Can anyone tell me where and how this conversation
is referenced and how it can be fixed?
--Krish. -
I'm currently upgrading from Weblogic 8.1 to Weblogic 9.1 on a Windows environment (Windows XP on my dev box) with an Oracle 8.1.6 database.
During the upgrade, we switched from BEA's Oracle OCI driver ( weblogic.jdbc.oci.Driver ) in Weblogic 8.1 to their Type 4 JDBC driver in Weblogic 9.1 which resulted in a "Net8 protocol error".
Does anybody know what's causing this error and how to resolve this?
Thanks
Stack trace:
####<16-Jun-2006 9:37:35 o'clock AM PDT> <Error> <HTTP> <HY119402> <HY119402.CM-Fleet-Admin> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1150475855789> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@681e45 - name: 'CMWeb', context-path: '/CMWeb'] Servlet failed with Exception
com.abs.cmweb.main.MainRuntimeException: CMWeb: INTERNAL RUNTIME EXCEPTION: EJB Exception: ; nested exception is:
com.westech.jade.service.entity.EntityRuntimeException: INTERNAL RUNTIME EXCEPTION: INTERNAL RUNTIME EXCEPTION: <b>[BEA][Oracle JDBC Driver]Internal error: Net8 protocol error.SQL Failed</b>: SELECT OID, BOUNDARY_NAME, USER_ID, PREFERENCE_VALUE FROM CMWEB_BOUNDARY_PREFERENCE WHERE BOUNDARY_NAME = ? AND USER_ID = ?
at com.abs.cmweb.main.control.boundaryUserPreferenceController.BoundaryUserPreferenceControllerRIProxy.findBoundaryUserPreference(BoundaryUserPreferenceControllerRIProxy.java:148)
at com.abs.cmweb.main.util.boundaryUserPreferenceHelper.BoundaryUserPreferenceHelper.getBoundaryUserPreference(BoundaryUserPreferenceHelper.java:50)
at com.abs.cmweb.waterConveyance.boundary.viewingWCInstructionsAndImplementations.ViewingWCInstructionsAndImplementationsUseBean.applyUserPreference(ViewingWCInstructionsAndImplementationsUseBean.java:275)
at com.abs.cmweb.waterConveyance.boundary.viewingWCInstructionsAndImplementations.ViewingWCInstructionsAndImplementationsUseBean.processBoundaryEvent(ViewingWCInstructionsAndImplementationsUseBean.java:179)
at com.abs.cmweb.waterConveyance.boundary.viewingWCInstructionsAndImplementations.ViewingWCInstructionsAndImplementationsFromHomeUseBean.processBoundaryEvent(ViewingWCInstructionsAndImplementationsFromHomeUseBean.java:32)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.fireEvent(HtmlBoundaryController.java:1303)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHtmlBoundaryAction(HtmlBoundaryController.java:337)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHttpServletRequest(HtmlBoundaryController.java:255)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processRequestResponse(HtmlBoundaryController.java:152)
at jsp_servlet._waterconveyance._viewingwchome.__viewingwchome._jspService(__viewingwchome.java:329)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:380)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:298)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.doForward(HtmlBoundaryController.java:833)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.doForward(HtmlBoundaryController.java:966)
at com.abs.cmweb.main.boundary.navigatingCMWeb.NavigatingCMWebUseBean.doRedirectToBoundary(NavigatingCMWebUseBean.java:290)
at com.abs.cmweb.main.boundary.navigatingCMWeb.NavigatingCMWebUseBean.processBoundaryEvent(NavigatingCMWebUseBean.java:234)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.fireEvent(HtmlBoundaryController.java:1303)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHtmlBoundaryAction(HtmlBoundaryController.java:337)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHttpServletRequest(HtmlBoundaryController.java:255)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processRequestResponse(HtmlBoundaryController.java:152)
at jsp_servlet._main._viewingcmwebhome.__navigatingcmweb._jspService(__navigatingcmweb.java:470)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:426)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:152)
at jsp_servlet._main._viewingapplicationmessages.__viewingapplicationmessages._jspService(__viewingapplicationmessages.java:298)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)Doug Chew wrote:
I'm currently upgrading from Weblogic 8.1 to Weblogic 9.1 on a Windows environment (Windows XP on my dev box) with an Oracle 8.1.6 database.
During the upgrade, we switched from BEA's Oracle OCI driver ( weblogic.jdbc.oci.Driver ) in Weblogic 8.1 to their Type 4 JDBC driver in Weblogic 9.1 which resulted in a "Net8 protocol error".
Does anybody know what's causing this error and how to resolve this?
ThanksHi, yes. Our old, deprecated and now removed type-2 driver used OCI (whatever version
you have installed) to talk to Oracle. Our new drivers use the wire-level protocol for
all supported DBMS versions. Oracle 8.1.6 is extremely old. I don't think it's even
supported by Oracle anymore, is it? I think you have two options:
1 - Try using Oracle's driver, in the type-2 mode so it also uses OCI.
2 - If (1) doesn't work, you probably have to upgrade your DBMS.
Joe
>
>
Stack trace:
####<16-Jun-2006 9:37:35 o'clock AM PDT> <Error> <HTTP> <HY119402> <HY119402.CM-Fleet-Admin> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1150475855789> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@681e45 - name: 'CMWeb', context-path: '/CMWeb'] Servlet failed with Exception
com.abs.cmweb.main.MainRuntimeException: CMWeb: INTERNAL RUNTIME EXCEPTION: EJB Exception: ; nested exception is:
com.westech.jade.service.entity.EntityRuntimeException: INTERNAL RUNTIME EXCEPTION: INTERNAL RUNTIME EXCEPTION: <b>[BEA][Oracle JDBC Driver]Internal error: Net8 protocol error.SQL Failed</b>: SELECT OID, BOUNDARY_NAME, USER_ID, PREFERENCE_VALUE FROM CMWEB_BOUNDARY_PREFERENCE WHERE BOUNDARY_NAME = ? AND USER_ID = ?
at com.abs.cmweb.main.control.boundaryUserPreferenceController.BoundaryUserPreferenceControllerRIProxy.findBoundaryUserPreference(BoundaryUserPreferenceControllerRIProxy.java:148)
at com.abs.cmweb.main.util.boundaryUserPreferenceHelper.BoundaryUserPreferenceHelper.getBoundaryUserPreference(BoundaryUserPreferenceHelper.java:50)
at com.abs.cmweb.waterConveyance.boundary.viewingWCInstructionsAndImplementations.ViewingWCInstructionsAndImplementationsUseBean.applyUserPreference(ViewingWCInstructionsAndImplementationsUseBean.java:275)
at com.abs.cmweb.waterConveyance.boundary.viewingWCInstructionsAndImplementations.ViewingWCInstructionsAndImplementationsUseBean.processBoundaryEvent(ViewingWCInstructionsAndImplementationsUseBean.java:179)
at com.abs.cmweb.waterConveyance.boundary.viewingWCInstructionsAndImplementations.ViewingWCInstructionsAndImplementationsFromHomeUseBean.processBoundaryEvent(ViewingWCInstructionsAndImplementationsFromHomeUseBean.java:32)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.fireEvent(HtmlBoundaryController.java:1303)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHtmlBoundaryAction(HtmlBoundaryController.java:337)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHttpServletRequest(HtmlBoundaryController.java:255)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processRequestResponse(HtmlBoundaryController.java:152)
at jsp_servlet._waterconveyance._viewingwchome.__viewingwchome._jspService(__viewingwchome.java:329)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:380)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:298)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.doForward(HtmlBoundaryController.java:833)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.doForward(HtmlBoundaryController.java:966)
at com.abs.cmweb.main.boundary.navigatingCMWeb.NavigatingCMWebUseBean.doRedirectToBoundary(NavigatingCMWebUseBean.java:290)
at com.abs.cmweb.main.boundary.navigatingCMWeb.NavigatingCMWebUseBean.processBoundaryEvent(NavigatingCMWebUseBean.java:234)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.fireEvent(HtmlBoundaryController.java:1303)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHtmlBoundaryAction(HtmlBoundaryController.java:337)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processHttpServletRequest(HtmlBoundaryController.java:255)
at com.westech.jade.service.boundary.html.HtmlBoundaryController.processRequestResponse(HtmlBoundaryController.java:152)
at jsp_servlet._main._viewingcmwebhome.__navigatingcmweb._jspService(__navigatingcmweb.java:470)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:426)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:152)
at jsp_servlet._main._viewingapplicationmessages.__viewingapplicationmessages._jspService(__viewingapplicationmessages.java:298)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179) -
SIR,
i hadbeen installed oracle aplication server.but i m not connecting to database.when i use the sql*plus.i use the user name-scott &password-tiger.i got an error ORA-12560=TNS PROTOCOL ERROR.
I M NOT ABLE TO RECTIFY ITS PROBLEM,how can i create host string in oracle application server 10g.please send reply its very urgent.
thanx ranjeetAlthough this question is completely off topic of the Personalization you can learn how to configure the SQL*Net connect from the manual by reading the topic "Configure the Client to Use a Net Service Name" found at the following link:
http://download-west.oracle.com/docs/cd/A91202_01/901_doc/network.901/a90154/gettings.htm#483215 -
Connector Specific Error.
Can anyone PLEASE tell me in plain english not techi talk how to fix this error?Hey royhanif,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to resolve the connector specific error: www.blackberry.com/btsc/KB15294
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Error: [Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
hello,
our application vendors are receving the below errors while running their data load job.I spoke to our networking team member and he said everything looks good on the networking side .Can someone please help me with the below errors.we are using
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64) Enterprise
Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1).
Windows OS:windows server 2008 R2 sp1
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
|Data flow DIM_CONTRACT_SWAM_INIT_LOAD_DF|Loader Key_Generation_DIM_CONTRACT
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
ODBC data source <HPWDBOE001> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
Driver][DBNETLIB]ConnectionWrite (send()).
7280
6920
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.>.
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
|Data flow DIM_EMPLOYER_GROUP_SWAM_INIT_LOAD_DF|Reader TCRdr_9
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
ODBC data source <serverName> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Protocol error in
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
TDS stream
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionRead (recv()).
6760
6164
DBS-070401
6/5/2014 1:17:24 PM
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.>.
I googled and found the below link the below link which asked me to enable named pipes.I enabled
namped pipes in the sql server Network configuration.I havent yet restarted the sql services as this is a prod box.I will do it later in the evening today.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/69149a71-3c15-4c95-9f95-a30db458abeb/sql-server-2005-communcations-errors-through-odbc?forum=sqldataaccess
Can someone help me with these errors.
Thanks
luckyThank you Erland.
I dont see any crash dumps in sql server.I checked the tcp chimney and its set to automatic.I am not knowing what to look at to resolve this issue.
if its the issue with the client API can i ask our vendor to check the client?
Our networking member gave the following report:
No problems on vlan 14 or your port the top is from the switch to your server then bottom is from my pc to your server
SP_DC_CORE_VSS# ping 10.10.12.228
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.12.228, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
SP_DC_CORE_VSS#
lucky
Maybe you are looking for
-
My itunes 8.1 won't open
I have been having problems with itunes for a few months now with Itunes 8.0/8.1 on Windows XP. Back in December when itunes 8.0 came out, i downloaded it and I think my quicktime program became corrupt shortly there after. Now whenever I try to open
-
How can i add my new songs in my ipod???
i switched to manually managed songs coz i lost all my music ,and now i can t add new songs on my ipod ,i ve searched in support but they don t explain it very well!!! can somebody help me please??? how can i drag my songs to my ipod??? thank u very
-
I have reinstalled windows 7 and lost my bookmarks from yesterday. How do I recover them
Ihave tried to recover from bookmarks-12-11-20.json but this doesn't seem to have them. I am looking for the bookmarks that were on my PC yesterda. I would be very grateful if you could help. They are very important to me.
-
As of this morning I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite (V10.10). It seems to be isolated to MS Word. Any thoughts?
-
Error 150.30 – Repair?
Error 150.30 How to repair?