JS error on export with Edge Animate?

Ive just started messing around with Edge Animate and Muse. The first time or two that I exported it worked. But I'm not sure what I did but now everytime I export I ge tthis:
http://i.imgur.com/gtqQDiH.png
It runs FINE in the preview, but when I export I get this error everytime.
Even with a new site and a new animation.

Hi,
Great. I must tell you that the most common cause of JavaScript errors on a Muse page is .js files missing from the server or .js files, or other files on the server, not all being from the save version of Muse. If you're using an external FTP client, you must re-upload all files and folders whenever a site is exported using an updated version of Muse (since the code generated by Muse changes from release to release to improve page load performance, support new features, address new browser versions and/or devices, etc., etc.).
The second most common cause of JavaScript errors on a Muse page is buggy embed code and/or embed code that conflicts with the JavaScript used by Muse.
Regards,
Rohit Nair

Similar Messages

Glitches and Load Speed Issues with Edge Animate Site

I recently created a website at www.goshowpro.com and am having some glitches and load issues occur and would appreciate any help or insight into the matter. The site loads relatively quickly on my computer and my hosting servers technical support system but when I show it to my client it takes anywhere from 15-20 seconds, even after I have cleared the cache and cookies. All my image files are 'gifs' as to alleviate memory usage and I don't know what else to do that I haven't tried yet. Additionally, when you go to the services page from the about page, the light beams don't connect to the lighting fixtures and the text is placed differently than what I initially had in Adobe Edge Animate before I published the files. And the facebook link doesn't go to facebook but to www.goshowpro.com/facebook.... (ie I get a 404 error) even though in the program I have the link set as www.facebook.com.... I don't know what else to do besides what I have been doing and would very much appreciate any insight into these issues.
I should also mention that I used more html files than I initially planned due to lack of support on creating complete animation functionality with Edge Animate. I would like to have everything on one page but I don't know if that would be possible with the current version of Adobe Edge Animate (1.0.1.204.22434). Thank you again for your help.
Mike

Hi, Mike-
Have you tried profiling? You can use Firefox's Firebug or Google Chrome Inspector to see what's taking so long to download.
http://blogs.adobe.com/edge/2012/01/04/why-cant-it-just-work/
-Elaine

Update only a part of a project with Edge Animate CC 2014.1.1 PROBLEM

WIN 8.1
Edge Animate CC 2014.1.1
Firefox 35.0
The Problem started after Update to Edge Animate CC 2014.1.1
I want to update text which is an Edge Animate file
The original Project was programmed with Edge Animate 1.0(not CC)
After I made the changes and saved the file I get a “updatedtext_upgraded” folder that contains the new files.
I am not sure what to do with that folder:
A) Do I have to exchange the data from the Folder ”updatedtext_upgraded”?
or
B) Do I have to put the whole project into the folder “updatedtext1_upgraded”?
or
C) Do I have to develop the whole Project new with AN CC 2014.1.1?
Thank you

I am currently having issues opening older compositions in 2014.1.1
I have never used an earlier version but have a large project and I am using EA for the first time.
Before I started it I gathered many tutorials and downloaded examples of the features I would need in my new project only to find that they all were created in earlier versions of EA and when I publish from my version they are not working properly in a wide variety of ways.
It seems there are few tutorials built for the very latest version - things like custom scrollbars for text and loading and unloading composiitons - see huge lists online of things Adobe have apparently 'fixed' with this version but it feels like other things are broken.
I am now desperately searching for information on what exactly is deprecated and what I need to do to get files working correctly.
Very worried indeed.

Buttons created with edge animate are not working on android and windows devices

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

How to zoom and pan with Edge animate?

Hi,
I have been trying to make a project with Edge Animate, it is all about an image, but I want to be able to zoom and pan the image. Can you please send me an example if there is any around? or Can you explain me how to zoom and pan with Edge Animate?
Thanks,
Guasch

I am having this same issue! I am searching through forums on what tools to use to create a good zoom and pan on an image that contains hyperlinks an other things, developed in Adobe Edge Animate.
So far, here are some solutions I have come across:
http://craigfrancis.github.io/zoomify/
http://zynga.github.io/scroller/demo/dom.html
These two seem to be the closest solutions to what I'm looking for. Now I just have to integrate the javascript into my adobe ege animate composition. Hopefully that won't be too hard. Are there any suggestions from the adobe community on how to do this?

Is it possible to export an Edge Animate clip into YouTube, somehow?

Is it possible to export an Edge Animate clip into YouTube, somehow?

Hi, rinse 62-
This thread popped up at about the same time as your message:
http://forums.adobe.com/message/5275274#5275274
This should get you started. From video capture, you can easily upload to YouTube.
Cheers,
-Elaine

Is snippet master compatible with edge animate? Or another easy to use cms?

I am looking for an easy way for clients to update their website text, and am looking at making a whole site with edge animate.
Any ideas? From anyone who has tried this?
Thank you.

Hi there,
Thanks for your suggestions! We're looking at ways to make the timeline more flexible as far as nesting and/or hiding elements, so hopefully these types of improvements will come as Animate continues to grow. Just wanted to quickly pop in to address a few of your bullet points - hopefully, other Animate users can answer regarding whether they use Animate for software simulation.
Your first two points (I think) can be at least somewhat addressed by using symbols. Each symbol has its own timeline which can contain many elements, but it will appear as a single element in the main (Stage) timeline.
Regarding video, there's currently only one HTML5 browser that natively supports video with alpha transparency: Chrome, using video encoded to the webm format. See here for more info: Alpha transparency in Chrome video - HTML5Rocks Updates
Once other browsers start incorporating native support for video with transparency, this could be pretty cool. But as of now, native browser support is still quite limited.
Thanks,
Joe

How can I capture a snapshot/screenshot from my game made with edge animate

I am wondering if its possible to put a symbol button inside edge animate once the user clicks on it it downloads a screenshot from the current screen the user is on because it's a required inside the project I have made and the client is really asking for this advantage and I made the whole game with edge animate so please if anyone has any solutions to tell me about them..Thanks

Hey, HeavenChains-
We don't use canvas natively, so the html5 canvas screenshot may not work for you. I did a quick websearch and there are libraries out there that may take a screenshot for you, but you may want to be wary due to privacy concerns with using third party software.
Here's one of the ones I found (please don't take this as a recommendation, as I haven't tried it myself):
http://grabz.it/api/javascript/
Hope that helps,
-Elaine

Error with Edge Animate animations

Muse 7 Get an Error when opening a page with an Edge Animate animation. This didn't happen with the earlier version of Muse. Error is "MuseJSAsset: Error calling selector function: TypeError: 'undefined' is not a function (evaluating 'Muse.Utils.initializeAnimations()" See screen shot.
MacOSX Mavericks.
ted

Hi Ted,
Can you send me your .muse file and .oam file to [email protected] with the subject attn: Dana and a link to this thread?
Thanks,
Dana

Is there a better way to deal with Edge Animate CC's library management?

I haven't been using Edge Animate CC for very long, but I already have a huge list of complaints. Although I could go into detail about features that seem to be missing from my version of Edge (just a quick example, all of the tutorials I've seen have a quick code insert feature on the right side of the code dialog box that my version doesn't seem to have, or even have the option for turning on), right now I want to focus on Edge's HORRENDOUS LIBRARY MANAGEMENT.
So I created the following animation which I have put into an iframe:
The issue I had on the first draft of this project was that I (perhaps naively) thought that there would be an option to actually re-size the pictures on export. There wasn't, and so my original version was really, really large, took way too long to load, and needed to be updated. For the second version, I reduced the size of the pictures and made them JPEG files (some of the originals were - quite unnecessarily - large PNG files) and reduced the quality so that they were all under 10KB. Of course, I had to rename the files and re-import them to Edge's library. This is where my problems started.
You see, edge will put the files into a folder marked "images" when you publish them in a folder, so I just assumed (NOT UNREASONABLY) that the resulting animation would pull from the images folder. It worked fine in the preview, so I pushed it via FTP, only to find that all of the original files (which were not in the new animation) were pushed to the new "images" folder. The only library management that you get in Edge is apparently looking for the file in the folder you designate as the "Library" folder, so deleting these images out of the "Images" folder makes not one bit of difference. That should have been my first clue that something was rotten in Denmark, to use a Shakespearean metaphor. After removing these files and publishing my banner again, suddenly the new images weren't showing up. They were clearly in the "images" folder on the FTP server, but they weren't showing up in the animation. So I inspected the banner on the site, only to find that rather than point to the images folder, they are in fact pointing to the library folder. WHY DO THE PUBLISHED IMAGES POINT TO THE "LIBRARY" FOLDER THEY WERE PULLED FROM INSTEAD OF THE "IMAGES" FOLDER THAT THEY'RE PUBLISHED TO? I added a new file tree that mimicked the folder structure and put the images in a mock "library folder" and now the animation works again.
The library management in this program is just plain awful (I can't stress this enough), making it a chore for experienced users and a red-hot rage-keyboard-pounding mess for everyone else. And the worst part, there doesn't seem to be any explanation from Adobe on why it is this way.
I am really not looking forward to the next time I have to use this program at work.

I'm not sure that's any easier. It would be nice if Edge gave you a(n obvious) way to re-link files, but it even fails in that respect.
What would be better is if I could just point Edge to my FTP site and put the library on there. It would solve so many problems... failing that though, some sort of library management option set needs to be implemented in this software. I try to practice appropriate file management, but I hate having to be punished with an extra twenty minutes of work for one little mistake.

Integrating External JQUERY code with Edge Animate

Hi all...
There are two ways i can see of integrating Edge Animate With External JQuery
Something happens within Adobe edge and triggers something to happen externally or vice versa.....
1: When an action is performed (mouseUp MouseOver... etc...) we can initiate some external Jquery
For example
When I "mouseUp" my play button i run the function "playPause()" and my audio starts to play
function playPause(){
    if( $("#liveStream").data("jPlayer").status.paused ) {
        $("#liveStream").jPlayer("play");
    else {
        $("#liveStream").jPlayer("pause");
So this is fine... i perform an action in Adobe Edge and something external to the composition occurs, in this case it connects to a live stream of audio and the user gets the desired result.
2:When an event occurs in external Jquery (playing, connection lost, audio not ready... etc...) we can perform an action within Adobe Edge
For example
When the audio stream is playing and the user is definatly hearing music i need to perform an action within Adobe Edge like "sym.$("playButton").hide();" which hides the play button because obviously there is no need to click play anymore when the music is already playing..
This is were my Jquery understanding ends..
Questions:
1: Where do i put global code within my Adobe Edge composition that triggers actions when external jQuery returns an event
2: How do i go about coding this...
Below is my best attempt
function playStatus(){
     $("#liveStream").bind($.jPlayer.event.playing, function (event) {
          sym.$("playButton").hide();
Now my attempt is probably way off the truth but im hoping you understand what i am trying to achieve..
Thank you for reading this through
Any advice would be greatly appreciated.....
Justin..

Hi, thanks for the assistance....
I have tried to integrate the following code into the "creationComplete event"
//Initiate JPlayer
$(document).ready(function(){
    var stream = {
        mp3: "http://streaming.radionomy.com/ABC-Jazz"
    ready = false;
    $("#liveStream").jPlayer({
        ready: function (event) {
            ready = true;
            $(this).jPlayer("setMedia", stream);
        pause: function() {
            $(this).jPlayer("clearMedia");
        error: function(event) {
            if(ready && event.jPlayer.error.type === $.jPlayer.error.URL_NOT_SET) {
                // Setup the media stream again and play it.
                $(this).jPlayer("setMedia", stream).jPlayer("play");
        swfPath: "js",
        supplied: "mp3",
        preload: "none",
        wmode: "window",
        keyEnabled: true
//Create function for Play & Pause
function playPause(){
    if( $("#liveStream").data("jPlayer").status.paused ) {
        $("#liveStream").jPlayer("play");
    else {
        $("#liveStream").jPlayer("pause");
The above code used to be within a player.js file that i called into edge, As you have recomended to me i have moved this code to within edge...
When i try to play the stream i get the following error from the console "Javascript error in event handler! Event Type = element"
It is refering to edge.3.0.0.min.js
In a bit stuck now as to why it is not working....
This error is usually generated when the scripts are not talking to each other so im guessing it should be an easy one for you guys as my knowledge of jquery is not great!

Problem with Edge Animate oam file's autoplaying inside Muse

Hi,
I have created a Donut Chart animation in Edge Animate. It has 6 donut charts. Each chart is a symbol with animation inside. Everything looks good in edge animate. But, the problem is the .oam file is not working like I want inside Muse. The scroll effect function of is not working. It autoplays every time, regardless of the scroll settings applied. I am using Edge Animate 2014.1.1 and Muse 2014.3.1. So, it's kind of the latest versions.
I tried several different methods. I found out that the animation works fine in Muse if I don't use any symbol in Edge Animate. Then the scroll function works like a charm. But if I use symbols, then the scroll function stops working. I want to use symbols for a reason. Because, I am making the website as a template to sell and want to include Edge Animate animations in it. Without using the symbols, it will create several objects in one place. And it would be too hard for people, with less knowledge of the program, to edit them.
What should I do now? Please help!
Best Regards

Hello,
Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
If the issue still persist please share the compressed project file with us to take a look at it.
Regards
Vivek

Constant crashes with Edge Animate and Yosemite

I'm using Edge Animate running on a macbook pro and it is crashing every few minutes (like many others are reporting).
The program is up-to-date. I have uninstalled and reinstalled it.
Sometimes after a minute or two of working, the display features disappear. Old bounding boxes remain but, with some careful cursor action, I can still manipulate the image or symbol. . . until the entire program freezes. Other times things just stop working (e.g., motion paths). The only solution is to force quit the program -- the button on the crash notice rarely works.
Each time it crashes, it seems to create another Adobe Edge Animate CC 2014.1 Helper in the Activity Monitor (don't know what that means). I've tried deleting them but it doesn't help.
In the console, I get
2/18/15 9:16:30.612 AM Adobe Edge Animate CC 2014.1[4172]: *** Assertion failure in -[NSEvent subtype], /SourceCache/AppKit/AppKit-1343.16/AppKit.subproj/NSEvent.m:2427
There are 43 lines (!!!) that are identical to the one above.
This is obviously a known problem and needs to be acknowledged and fixed!

Hi L Nordstrom,
- If you have Dropbox installed, uninstall the software and retry.
- If you are accessing files from a remote network, copy them to your local computer, and retry.
Let us know if you still face issues.
Thanks,
Preran

Adobe Muse with Edge Animate components plays great on the Mac but images don't show in Windows. Any suggestions?

I am using CC with both Edge Animate and Muse. After uploading to the website host it plays great on the Mac but images don't appear when I'm using Windows. Any suggestions?

Hi, VelveteenWebDesignGroup-
You're in luck! We just added in a feature to the latest version of Edge Animate CC (3.0) to enable the CDN option for OAM publish (what we call the "Animate Deployment Package"). This means that your Animate compositions can now references jQuery and the Animate runtime from the network instead of from the project directory. (Please note that this will only make sense for Dreamweaver and Muse integration with OAM and won't make sense for InDesign.)
To turn this on, launch Animate and go to File > Publish Settings. Then select the Animate Deployment Package on the left and click "Host runtime files on Adobe CDN." Save and publish, and you should be good to go.
Hope this helps,
-Elaine

"Installation Failed" error while installing Adobe Edge Animate.

I am having trouble while installing Adobe Edge Animate from Adobe Application Manager. The downloading is always stucked at 1% and after 5 minutes, I get the error "Installation Failed". The screenshot is attached.

Hi Ahsan,
Update your Adobe Application Manager from the below URL and start the download again:
http://www.adobe.com/applicationmanagerpatch/index.html
Regards,
Jairaj

JS error on export with Edge Animate?

Similar Messages

Maybe you are looking for