JSF and WSAD - basic question...

I'm working with WebSpher Application Developper 5.0, I don't succeed in creating a LifecycleFactory instance in the ServletContextListener. I have a FacesException error.
In the following code (which is very common i know...), the getFactory method raises a FacesException error :
LifecycleFactory factory = (LifecycleFactory)
FactoryFinder.getFactory(FactoryFinder.LIFECYCLE_FACTORY);
It works when i use Catalina (which was provided with the examples), do you think it may come from Websphere or is there something i should configure ?
thanks,
Hugh

I'm working with WebSpher Application Developper 5.0,
I don't succeed in creating a LifecycleFactory
instance in the ServletContextListener. I have a
FacesException error.
In the following code (which is very common i
know...), the getFactory method raises a
FacesException error :
LifecycleFactory factory = (LifecycleFactory)
FactoryFinder.getFactory(FactoryFinder.LIFECYCLE_FACTO
Y);
It works when i use Catalina (which was provided with
the examples), do you think it may come from Websphere
or is there something i should configure ?At the moment, we can't offer support on non JWSDP servers, but are you
certain that all the required jars, jsf-ri.jar, jsf-api.jar,
commonds-*.jar are available to your webapp classloader in WebSphere?
Ed

Similar Messages

MapViewer - A team of newbies and definitely basic questions...

Dear All,
We are a team of programmers who are very new to MapViewer. We are an experienced team of GIS programmers, however, we find difficulty in applying known functions to MapViewer. It's a great application, but a lot of unknowns.
We have very basic questions, as well as advanced ones. I would like to summarize them as follows:
1. How can I let the map to be zoomed into a specific feature?
2. How can I execute a query to find a specific feature?
3. How can I execute network analysis query to find the shortest path or paths between two or more nodes?
4. How can I find out the nearest node to the location when user clicks on an arbitrary location on the map?
5. How can I execute generic queries, without (this is important) need to send/receive XML queries?
6. The bottomline is: we just want to use ready made functions to make it as easy as possible.
Anyhelp is greatly appreciated. We are stuck with the basics of MapViewer (Oracle Maps).
Please help us find the light :)
Best regards.
Desperate MapViewer Team!

Here are some quick answers, hopefully they are not too late.
1. You will construct a theme (mostly a dynamic one) that contains the specific feature, then call the theme's setBoundingTheme(true). Typically what we see people do is: a) create a dynamic theme with a query that selects a set of features; b) create a FOI layer based on the theme (MVThemeBasedFOI); c) call the setBoundingTheme(true) on the FOI layer. The end result, is that MapViewer will process your query and return the FOI data to the Oracle Maps JavaScript client, which will zoom the map to include the set of features in the FOI layer. Check out Oracle Maps tutorial #35 for an example.
2. This is partly answered above. Basically you will construct a theme with a dynamic query string. You may want to check out tutorial #37 which finds out and displays the buffers around a set of points; the buffers are constructed via a SQL query at run time.
3. This is not really a MapViewer question; rather, you may need to consult the Oracle Spatial routing engine XML API; the gist is you send the XML route request to the routing server, which returns a set of coordinates for your directions, which you can construct (MapViewer) FOI objects out of and display them on the map.
4. I'm not sure our routing engine or network data model API has such a function ready for use; what you can do is if you can formulate the SQL query string (with the current location represented as a binding variable), then you can create a theme out of this query condition, and simply supply the location at run time to get the set of nodes.
5. Can you please elaborate on what do you mean by generic queries? A simple usage scenario will help.
6. We understand; there are quite a lot of things that can be made easier out of the box and we are working towards that. in the mean time, just ask questions if you have them; and always check out the Oracle maps tutorials first (actually reading the MapViewer primer article should be the absolute first step :) ).
thanks
LJ

JSF and WSAD 5.1.2

Hello.
I'm exploring using JSF on a new project at work Looks good so far. Picked up the Java Server Faces in Action book. Just started it.
We use WSAD 5.1.2 When building JSP/JSF pages using the IDE, it puts all kinds of stuff in the jsp files that I'm not sure of. (scriptCollector, etc). Examples in the book look much cleaner.
So, question is...do you experienced users bother to use the IDE to create the pages, or just roll them by hand? If you roll them on your own, any issues with IBM compatability?
Any experiences would be appreciated.

We have experienced some problems with Websphere 6, we tried for 3 weeks and moved back to 5.1.2
Problem like, websphere server behaving inconsistency and managed bean facility not working consistently, what we felt is it needs some time and testing still to be used.
May be you guys can report some bugs and it will fine to use in next 4-6 months.
Just my view.

Basic questions about JSF/af:panelPage/Facets

Hi there
Using JDev 10.1.3.3.0, I created a couple of JSP pages using JSF and ADF BC. Then I added to one of them a af:panelPage and changed the facet branding to be the company logo.
Do I need to do the same for the other page (and any other pages that I create)? Is there a place where I set this facet value globally?
And is there a way to set up what facets are included in a af:panelPage by default?
Sorry if these are basic questions, I am just starting to use JSF!
Thanks,
Luis

facets with af:panelPage.
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtTopicFile.jsf_apps%7Cadfcreate%7Caf_alay_pagecomponent~html/
http://otndnld.oracle.co.jp/document/products/as10g/101300/B25221_03/web.1013/b25386/web_complex002.htm
Re: <jsp:include page/> - Error

HT1311 I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

http://support.apple.com/kb/HE36
Regards.

HT1848 Forgive such a basic question, it's easier than looking it up. I have my iTunes music on macbook pro and have only synced it to one iPod. I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no ch

Forgive such a basic question, it's easier than looking it up. I have my iTunes music on macbook pro and have only synced it to one iPod. I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no charge?

will I be able to sync my music from computer to new iPod at no charge?
Yes, you will.

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

Basic questions about Bigdata, NOSQL and Hadoop

Hi,
I've basic questions related to Bigdata. (I've googled it but still wants to confirm with experts)
Please correct me if I am wrong on below.
1) As far as I know big data is collection of unstructured data. Even we can store relational data as well.
2) NOSQL is an Oracle product to handle bigdata (un structured data and relational data as well)
3) Hadoop is the only one frame work which is avilable in market to manage the bigdata.
What are the other database systems we have in the market to manage the bigdata.
Cheers,
Suri

Hi Suri,
1) "Big Data" does not have a crystal clear, black and white definition.
It is generally characterized as being the processing and management of an amount and type of data that makes a specific workload on that data slow and/or expensive.
Most commonly, Big Data involves processing and management of unstructured data of large volume and the typical technology used to store/process it is Hadoop, However, on occasion a NoSQL database will also deal with unstructured data.
Big Data is also seen often in the form of simple, semi-structured data of both large volume and/or large velocity and the typical technology used to store/process it is a NoSQL database. However, on occasion Hadoop will also deal with semi-structured data of large volume.
In some cases, Big Data is seen in the form of highly connected data that will be manipulated by advanced algorithms that will need to touch a lot of the data and the typical technology used to store/process it is a Graph type of NoSQL database.
2) NoSQL is a category of database technologies most often dealing with the issues as outlined in bullet 2 above. The Oracle NoSQL Database is oracle's product in the NoSQL category of database technologies. It does NOT store relational data. When using NoSQL relations between the data must be managed within the application code.
3) Hadoop and NoSQL booth manage Big Data, but different aspects as discussed in (1) above. Hadoop is a batch based, slow processing data technology, but the "slow" is relative because it can process very large amounts of data, so minutes is commonly seen as fast. NoSQL is a near real-time data processing technology and typically deals with Big Data where access times are in the single digit millisecond range.
Hope this helps,
-Robert

Possibly a very basic question but I have set up a spread sheet in Numbers and have viewed help videos but I can't get it to give me sums for the columns I highlight. Keeps coming up with the figure zero. I have version 09 2.3(554). Can anyone help

Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.

Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian.

Basic questions about connection sharing and radio mode

I just got TC and have a couple of basic questions.
At home I have a D-Link ADSL modem/router (no wifi) plugged into the wall, and would like TC to provide wifi. I've connected the WAN port to some LAN port of the router and everything works fine. The intented usage of the setup is wifi-only. Would you recommend TC to do DHCP/NAT? Or is Bridge mode better? In the latter case I don't fully understand who's routing the wifi network (though it actually works).
Second question is about radio mode. My wife has an iBook G4 that is not capable of talking 801.11n, so I selected the n mode compatible with b/g. In that mode my black MacBook will still be able to talk 801.11n with TC? The iBook has very low usage, it is fine that computer uses 801.11g for TC, but I'd like the MacBook to go full-speed. (If that's not possible I'd ponder purchasing an 801.11n adaptor of some sort for the iBook.)

Would you recommend TC to do DHCP/NAT? Or is Bridge mode better?
It doesn't matter.
In the latter case I don't fully understand who's routing the wifi network (though it actually works).
The D-Link modem/router.
In that mode my black MacBook will still be able to talk 801.11n with TC?
Yes. It will only suffer lower bandwidth if the iBook G4 is actively connected.

Basic question inbound / outbound and source service (ASA 5505)

Hi there,
I'm new to the ASA 5505 appliance and have a few very basic questions. Hope I get some responses and not flamed for being a total newbie. :-)
Inbound versus outbound: I'm having a difficulty understanding the inbound versus outbound terminology. Can somebody please clarify? For example, if I want to block all http traffic from hosts on the inside to the internet but allow all https connections, intuitively I'd configure a rule to block outbound (= outgoing) traffic for the http protocol for the inside network. However, it seems as if I have to add this rule for inbound connections. Why is a connection from a host on the inside to a web server on the internet considered an inbound connection on the inside interface?
When I add a rule, I've got a "service" field and a "Source Service" field in the "More Options" section. What's the difference? Do I have to set both to the same value?
Your help is greatly appreciated.

Hi Ralf,
Yes, if you put a deny http, it would drop all packets for destination as http port, but be mindful that when you apply an access-list on your inside interface, it automatically activates the deny ip any any right at the bottom, you would be able to see that in the ASDM. So for the users that need be allowed access to the http, needs to be explicitly allowed http access, so your correct configuration would be:
access-list inside_access_in deny tcp host 192.168.1.1 255.255.255.255 any eq http
access-list inside_access_in permit tcp any any
access-group inside_access_in interface inside
This would block 192.168.1.1 to go to internet, but allow all others.
Second question, i haven't chceked the ASDM, but just remember out of memory, that this service option should be the protocol, whether ip,tcp,udp,esp or gre etc.
Moreover always try to block connections as closed to the source as possible, this would mean, if you want to filter traffic going from inside to outside, that should be done on the inside interface not outside.
Thanks,
Varun Rao
Security Team,
Cisco TAC

Basic Question on Copy and Delta link which one to use when?

Hi
Its basic question
My understanding about copy and Delta link is
Copy doesnot ahve direct relationship with source object (but it acts as a sibling) any changes done to spurce object does not affect target object.
Where as Delta link will have a parent child relation ship between source object bacially its a copy of source and inherits id properties. in case if i change source object does this affect target object, we can delete, add content to delta link target object.
let's say if i want to use standard quickpoll iView do i need to use copy or delta link similarly for other iviews, worksets, roles which one will be better.
Regards,
Murali

Murali,
Yes, your understanding is right.
Case 1 : Copy
A- Object
B- Copy of A
Both of them are independent.Any changes in A are not dependent on B and vice versa.
Case 2 : Delta Link
A - Object
B - Copy of A (via Delta link)
Any changes to A are reflected in B, as A is a parent and B a child.
But B would be an independent entity.Any changes to B would not effect A.
When you use either of them, depends on your need. When you are working with standard iviews or roles or workset, you can do a copy of the original, because in most cases we would not make changes to the standard roles or worksets or iviews. There by eliminating the process of making a delta copy.
But, if you are dealing with the roles that you have created and want to make a copy of it, you can use a delta link, because, even if you want to add more iviews and worksets to that role, they would get reflected when you make a delta copy.
Hope that helps.
Consider rewarding points for handy posts!
Cheers,
Sandeep Tudumu
Edited by: Sandeep Tudumu on May 6, 2008 2:10 AM

Solaris10 basic questions PHP and MYSQL

Hi,
I am trying to learn something of Solaris because it this OS is used at my job, well, we have one system T2000 sunfire, it has Solaris10, we are trying to setup as local server to share some html files, and also we are trying to install some mysql databases, well we already setup Apache2 and it is working fine:
svcs -a | grep -i http
online Mar_10 svc:/network/http:apache2
Something that I don't know is if the server has already installed PHP and if it is running, I just found these files containing PHP:
./usr/local/php
./usr/local/php/doc/php
./usr/local/php/bin/php
./usr/local/php/include/php
./usr/local/php/lib/php
./usr/local/php/bin/php
# cd bin
# ls -l
total 42041
-rwxr-xr-x 1 root bin 686 Jun 30 2005 pear
-rwxr-xr-x 1 root bin 21407604 Jun 30 2005 php
-rwxr-xr-x 1 root bin 877 Jun 30 2005 php-config
-rwxr-xr-x 1 root bin 593 Jun 30 2005 phpextdist
-rwxr-xr-x 1 root bin 3068 Jun 30 2005 phpize
I was wondering if some of you can tell me if php is installed and running, I think it is not running because I created an php file and it doesn't work.
I also need to know if mysql is working or not, I think it is working, these are the process that I found of mysql:
/usr/bin/ps -ef |grep mysql
mysql 843 798 0 Feb 22 ? 40:59 /usr/local/mysql/libexec/mysqld basedir=/usr/local/mysql datadir=/export/ho
root 798 1 0 Feb 22 ? 0:00 /bin/sh /usr/local/mysql/bin/mysqld_safe datadir=/export/home/database pid-
Thanks.

Thanks Alan bye the answer.
Here is my list of folder in /usr/local:
lrwxrwxrwx 1 root root 14 May 20 2009 Tcl8.4.2 -> /usr/local/tcl
drwxr-xr-x 10 root other 10 May 20 2009 apache
drwxr-xr-x 16 root bin 16 Jun 7 2009 apache2
drwxr-xr-x 2 root bin 5 Mar 9 18:16 bin
drwxr-xr-x 5 root bin 5 Mar 9 18:16 doc
drwxr-xr-x 2 root bin 7 Mar 9 18:16 include
drwxr-xr-x 3 root bin 39 Mar 9 18:16 lib
drwxr-xr-x 2 root bin 5 Mar 9 18:16 libexec
drwxr-xr-x 4 root bin 4 Jun 7 2009 man
drwxr-xr-x 14 root root 14 Jun 7 2009 mysql
drwxr-xr-x 5 root other 5 May 20 2009 perl5
drwxr-xr-x 8 root bin 8 Jun 7 2009 php
drwxr-xr-x 2 root bin 4 Mar 9 18:16 sbin
drwxr-xr-x 5 root bin 5 Mar 9 18:16 share
drwxr-xr-x 10 root other 10 May 20 2009 squid
drwxr-xr-x 10 root root 11 Jun 7 2009 ssl
drwxr-xr-x 7 root other 8 May 20 2009 tcl
drwxr-xr-x 10 root other 10 May 20 2009 tools
I know perl is running by:
# perl -v
This is perl, v5.8.4 built for sun4-solaris-64int
(with 31 registered patches, see perl -V for more detail)
Copyright 1987-2004, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using `man perl' or `perldoc perl'. If you have access to the
Internet, point your browser at http://www.perl.com/, the Perl Home Page.
And I was thinking, before install another thing I want to be sure that php is not installed or running, I would like to ask some questions:
How can I know if php is installed?
How can I know if it is running? the way I have tried is placing a PHP file in the /var/apache2/htdocs and tried it from the browser, but it didn't work.
If PHP is installed how can I enable it or start it? and how to make it permanent or start automatically when server boot up?
What happen if i try to install the AMP, may I have to backup the files that we already have in /var/apache2/htdocs?
Will the amp cause troubles or conflict to the apache, perl and mysql that are already installed and running?
Another basic question and hope not to cause angry, is there inside Solaris any equivalent folder to "program files" like in win? it would be to have an idea of all the applications already installed in the system. or which is or are the folders in Solaris where I can see all the installed applications?
the last question the term "the box" is the term for machine, station, server?
Thanks.
by the way here is a list of the process that are currently running
cmd     uid
sched     root
/sbin/init     root
pageout     root
fsflush     root
/usr/lib/inet/inetd start     root
/lib/svc/bin/svc.startd     root
/lib/svc/bin/svc.configd     root
/usr/lib/nfs/mountd     root
/usr/lib/sysevent/syseventd     root
/usr/apache2/bin/httpd -k start     webservd
/usr/sadm/lib/smc/bin/smcboot     root
/usr/lib/saf/ttymon -g -d /dev/console -l console -T ansi -m ldterm,ttcompat -h     root
/usr/lib/nfs/nfs4cbd     daemon
devfsadmd     root
/usr/sadm/lib/smc/bin/smcboot     root
/usr/lib/ldoms/drd     root
/usr/lib/nfs/statd     daemon
/usr/sbin/rpc.bootparamd     root
/usr/lib/crypto/kcfd     daemon
/usr/lib/picl/picld     root
/usr/sbin/rpcbind     daemon
/usr/lib/efcode/sparcv9/efdaemon     root
/usr/sbin/nscd     root
/usr/sbin/cron     root
/usr/lib/ssh/sshd     root
/usr/lib/nfs/nfsmapid     daemon
/usr/lib/nfs/nfsd     daemon
/usr/lib/sendmail -Ac -q15m     smmsp
/usr/sadm/lib/smc/bin/smcboot     root
/usr/lib/nfs/lockd     daemon
/usr/lib/saf/ttymon     root
/usr/local/mysql/libexec/mysqld basedir=/usr/local/mysql datadir=/export/ho     mysql
/usr/lib/saf/sac -t 300     root
/usr/lib/utmpd     root
/usr/lib/sendmail -bd -q15m     root
/usr/sbin/in.routed     root
/usr/sbin/in.telnetd     root
/usr/lib/autofs/automountd     root
/usr/sbin/in.rarpd -a     root
/usr/lib/ssh/sshd     myuser
/usr/lib/autofs/automountd     root
/usr/sbin/syslogd     root
/opt/SWIE/jetty/jre/bin/java -Djava.awt.headless=true -Djava.endorsed.dirs=/opt     root
ps -ef     root
/usr/lib/netsvc/rstat/rpc.rstatd     root
bash     root
/usr/sbin/in.telnetd     root
/usr/lib/snmp/snmpdx -y -c /etc/snmp/conf     root
/usr/lib/fm/fmd/fmd     root
/usr/sbin/vold -f /etc/vold.conf     root
/usr/lib/dmi/dmispd     root
/usr/sfw/sbin/snmpd     root
/usr/jdk/latest/bin/java -Dhostname=XXXHOSTnameXXX -Djava.security.policy==/opt/SU     root
/opt/realport/sparc64/ncxd -d /dev/digi_realport0 -i XXX.XXX.XXX.X -p 771 -e ne     root
(dnsserver)     squid
(dnsserver)     squid
/usr/lib/dmi/snmpXdmid -s XXXHOSTnameXXX     root
/usr/dt/bin/dtlogin -daemon     root
/bin/sh /opt/SWIE/jetty/etc/init.d/jetty start     root
(dnsserver)     squid
(dnsserver)     squid
/usr/local/squid/sbin/squid -DsY     root
(dnsserver)     squid
/usr/java/bin/java -server -Xmx128m -XX:+UseParallelGC -XX:ParallelGCThreads=4      noaccess
(squid) -DsY     squid
-sh     root
(unlinkd)     squid
/bin/sh /usr/local/mysql/bin/mysqld_safe datadir=/export/home/database pid-     root
-bash     myuser
bash     root
-bash     myuser
-sh     root
/usr/lib/ssh/sshd     myuser
sh     root
bash     root
/usr/sbin/in.telnetd     root
-sh     root
/usr/apache2/bin/httpd -k start     webservd
bash     root
/usr/apache2/bin/httpd -k start     webservd
-sh     root
sh     root
/usr/lib/ssh/sshd     root
-bash     myuser
/usr/sbin/in.telnetd     root
-sh     root
bash     root
/usr/sbin/in.telnetd     root
bash     root
/usr/apache2/bin/httpd -k start     root
-sh     root
/usr/apache2/bin/httpd -k start     webservd
/usr/lib/ssh/sshd     root
/usr/apache2/bin/httpd -k start     webservd
/usr/sbin/in.telnetd     root

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason

Here's a very basic question about 2 TB external drives and Time Machine.

Here's a very basic question about 2 TB external drives and Time Machine.
Ihave a Mac Pro with a .75 TB and 1 TB drive. It also has a 1 TB 2ndinternal drive. My current external drive is too small so I'll begetting a 1.5 TB or 2 TB drive.
Obviouslythe new larger 2 TB drive will backup everything on the Mac Prointernal drive with Time Machine. But there will be 1 TB of space leftover going to waste.
ShouldI partition the external drive so that the TM portion will be 1 TB andthe use the remaining extra partition for additional file backups withCarbon Copy?
Thanks for any insights.
I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

The problem with terabyte drives is that that a 3 TB is about as big as you can get without going into RAID territory. Ideally, a Time Machine drive should be 3 times as large as all the drives you are backing up. So, if you have 2.75 TB of internal storage, you should have 8 TB of Time Machine space.
Of course, that is "should". If your TB drives are mostly empty, then you can get away with something 3 times the size of your used disk space. Just remember that you are pushing it. Linc is right about Time Machine needing space to work.
It is unlikely that you have regular churn on 2.75 TB of disk. I suggest identifying which drives and folders have the most activity and excluding those drives and directories that don't change much. It would be better to archive the data that doesn't change often and keep it out of Time Machine. Then you may be able to get away with a 2 TB Time Machine drive.

JSF and WSAD - basic question...

Similar Messages

Maybe you are looking for