JSF Designs not usign Oracles BLAF

Hi All,
I have been searching high and low for some answers on how to create complex layouts that do NOT necessarily fit into the Oracle BLAF.
If I could give an example say http://www.yahoo.com
Lets say that I wanted to create a page that had the same layout as this site ignoring the content I only want the boxes that the content would fit into.
I have tried several times to do this with the various panel components and get close but there is always something that does not quite work.
If have tried using the panelBorder wich from what I can see renders a ton of tables which would be fine but most of the time the tables ignore the styles that I have specified in the styleClass attribute.
I have tried using panelGroup, panelHorizontal, panelPage.......
I guess what I am asking for is some help on page design. I have looked at all the oracle design guides\tutorials and none of them really cover anything outside the BLAF. Can anyone give a decent explanation of which controls one would use to create the Yahoo layout? I can do this in .NET HTML\CSS in about 10 minutes and I cannot beleive that it is impossible to do in the Java world. Please help I am loosing faith.
Thanks in advance

Hi,
... also keep in mind that HTML/CSS is a different technique than JSF, which similar to Swing uses layout containers. The benefit you gain through component based development of course has its flip side in that layout manipulation is a bit more complex than applying CSS to HTML fragments.
Frank

Similar Messages

JD12 JSF designer does not redraw

I am having many issues in JD12 JSF designer.
One is that when I for example select a navigation button's spacer and change it's Width property, the space between buttons does not change until file is closed and re-opened. Is that expected behaviour? Dropping an operation onto the navigation button is very tricky as well. Even when selected is 'Panel group layout', sometimes a rebinding window comes up. The space where a button has to be dropped is so narrow and volatile, that dropping a button becomes a torture that I have to repeat 2-3 times before it actually drops exactly one button (and does not rebind or drop 3 copies of it).
Another is that when I am changing table column Sortable and Filterable properties, they take 2 times to change the selected values from default to true or vice versa. The green dot does appear in front of property name, but drop down reverts to default (or previous value whatever it was). Suppose I changed Sortable from default to true - it did not change. Then I am changing Filterable in the sam manner and it does not redraw, but Sortable now does. Then I have to change sortable to the same new value again and Filterable now changes. Very annoying. Is there a fix?
Selecting the controls is bugged as well. Suppose I selected a table column and changed its Row header property to true, then went on to change another one. When I click another column, it does not select, but a baloon pops up which contains a binding for that column. To close it I have to click elsewhere and re-click the column again. Why is that happening?
Suppose I dropped a panel border layout onto a facet. Undoing that does not visually remove the border layout from a form. Only closing a file and re-opening will re-draw. Similarly, I am adding a navigation button from Operations, but the buttons do not re-draw to show that a new button was added. Same as previous, only closing/re-opening a file shows a new button. Royal PITA. Is there a fix?
Suppose I am changing initial size of a table. The number by the right corner changes showing the new size, but after the bottom border is released, the size does not re-draw. Only closing and re-opening a file shows the new size.
Resizing table columns is painful. When a column is shrinking, the columns to the right of it do not move accordingly - they stay put and the width of the very next column is increasing. Thus it is absolutely impossible to arrange the columns that are beyond visible width of the table. When the column is growing, the columns to the right of it behave erratically - often they suddenly increase their width and disappear beyond the right table border. This is simply infuriating.
The last is that if the data controls dropped onto the page contain columns from more than one table, then resulting application will throw runtime exceptions (null pointer). But if I deleted all columns but that very object's own columns, and dropped it onto the page, then it will work. After that I can add any columns from that object and it will work fine. The Create Table wizard clearly creates defective code.
I am running JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668 under Windows 7 32bit. Are these issues fixed in a more recent build or going to be fixed soon?

You are not understanding the term 'narrow space' I've used. It does not equal 'width of spacer between the buttons. It equals the area of display monitor where an orange drop indicator appears that supports dropping a new button in between the existing ones. I.e. where JD12 is allowing me to drop a new operation without rebinding the existing buttons.
The JDK version is the one that JD12 itself installed - 1.7.0_15. As that's the JDK that was shipped with JD12, I contend it has to be sufficient.
There is no Mcaffee on this machine. They are using Symantec AV. There is about 300-500 MB free RAM when these issues are occurring and CPU load is about 0%.
Another issue I just noticed is that javadocs are not loading. Doc Path for JDK 1.7.0_15 that came with JD12 is set to http://docs.oracle.com/javase7docs/api/ and there is no doc under the folder where JD installed its JDK. I don't know how to fish docs for an older JDK out of Oracle web site.
As you contend that it is my system that is a root cause, I looked up the system requirements for JD12 and found that my system exceeds them.
Oracle&#174; Fusion Middleware System Requirements and Specifications
Resource
Recommended Minimum
Value
CPU
Intel Core 2 i5 or equivalent
Memory
3 GB of RAM on 32-bit systems
4 GB of RAM on 64-bit systems
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
3 GB for Studio Edition
90 MB for Java Edition

Empty JSF Design view in JDeveloper 11g

Hello,
I m newbie in ADF.
JDeveloper version 11.1.2.2.0.
Fusion Web Application project.
After some developing time all my JSF Design view became empty. When I click on that empty surface there some exception raises:
oracle.bali.xml.share.WeakListenerManager:Sep 20, 2012 7:07:53 PM oracle.bali.xml.share.WeakListenerManager addListener
WARNING: Tried to add listener that was already attached: listener=oracle.jdevimpl.webapp.grammar.DelegatingGrammarProvider$IdenticalGrammarEventPercolator@17359cbsource=oracle.jdevimpl.webapp.facelets.libraries.FaceletsLibraryMetadataGrammarProvider@820671
oracle.jps.common:Sep 20, 2012 7:08:00 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
oracle.jps.common:Sep 20, 2012 7:08:00 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
java.lang.IllegalArgumentException: can't create position before or after oracle.xml.parser.v2.XMLDocument@bab945
java.lang.IllegalArgumentException: can't create position before or after oracle.xml.parser.v2.XMLDocument@bab945
o.bali.xml.dom.position.DomPosition.<init>(DomPosition.java:832)
o.bali.xml.dom.position.DomPosition.<init>(DomPosition.java:74)
And nothing else more..
I have reinstalled my JDeveloper, clean AppData JDeveloper. And still nothing solved. Other Demo Oracle project works fun.
Pls, help me.
Sorry for my English.

A have solved my problem after droping:
<context-param>
<description>Security precaution to prevent clickjacking: bust frames if the ancestor window domain(protocol, host, and port) and the frame domain are different. Another options for this parameter are always and never.</description>
<param-name>oracle.adf.view.rich.security.FRAME_BUSTING</param-name>
<param-value>differentDomain</param-value>
</context-param>
from web xml.

Oracle Designer 10g With Oracle 11g DB possible

Hi,
Please clarify my below query,
we are currently using oracle designer 10g and deploying the components to production DB which is in oracle 9i, We are planning to migrate to oracle supported version 11g DB, since oracle designer 11g is not there we would be sticking to oracle 10g itself, Now my question is, will we be having issues or road blocks with this combination Oracle designer 10g and Oracle 11g DB???
Regards
Bala

@Erik
Don't have a doc id. You have to go to the certication tab in My Oracle Support. Search for Oracle Designer 10.1.2.6.0 there you will find the three supported database version.
Oracle Designer 10.1.2.6.0 is certified with Oracle Database 11.2.0.1.0 on Microsoft Windows (32-bit) XP
Oracle Designer 10.1.2.6.0 with Oracle Database 11.2.0.1.0
Customers must review MetaLink Doc 1299040.1 Application Design Transformer Hangs at 65% when running against Oracle 11gR2
Certified with:
Oracle Fusion Middleware 10g 10.1.2.0.2 Oracle Developer Suites 10g 10.1.2.0.2 Oracle AS/DS Patch Set 10g 10.1.2.3.0
@Bala
Colleagues of mine have imported a designer repository inside 11gR2 and where not able to change objects inside the repository. When they imported the same designer dump inside an 11gR1 database it worked fine.
In the other post (Re: 11G compatibility it is also written that there are some major bugs and those bugs will not be fixed.

Designer 6i on Oracle 8.0.6 Server

Hi,
Did anybody used Designer 6i on Oracle 8.0.6 database Server?? I tried using it but I am getting the following error:
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00000: Import terminated unsuccessfully
I tried playing around with the storage space, but in vain.
Could somebody help me in this??
Regards,
Moiz

Hi Moiz,
Unfortunately, Designer 6i is not supported or certified on
Oracle 8.0.6.
Regards,
Dominic Battiston
Designer/JDeveloper Product Management
Application Development Tools

[Blog] If you are not scaling Oracle WebLogic like this, then you're doing it wrong

If you are not scaling Oracle Middleware like this, then you’re doing it wrong
We have all built an Oracle Middleware box from scratch once. But, if you ever build an Oracle Middleware box from scratch twice, you’re doing it wrong! (click to tweet). Okay, maybe that is a little extreme. Surely there are some business requirements that justify building multiple Middleware deployments from scratch, but you should certainly do everything in your power to avoid it. Here’s how you should be implementing Oracle Middleware with today’s tools. (If you don’t feel like reading, jump to the end to see how Blue Medora makes your life a whole lot easier).
Oracle Middleware is designed from the ground up to be both vertically and horizontally scalable. Unfortunately, most implementations of Oracle Middleware do not effectively leverage these capabilities and many admins focus only on scaling vertically. To maximize your Oracle Middleware investment, you must have an appropriate strategy to horizontally scale within your private/public crowd.
Continued: If you are not scaling Oracle Middleware like this, then you’re doing it wrong | Blue Medora

I'm not entirely sure that you are right or wrong on the phone recording issue. As soon as I hear the Verizon message state that "This call may be monitored or recorded for quality and training purposes" I flip my recorder on. I always tell Verizon that our call is either being recorded likewise or that it might be monitored by other ears. I do this at the get go so that names are recorded and I hear their response. A lot of the times the reps, some who work in a call center and some who work from home, some surrounded by screamin younguns and barking dogs and cats fighting....they will flat out refuse and say that THEY don't record the calls, that someone at Verizon does, and if you want to get a copy of the recording that there is a number to call, "I'll get that number for you, one moment........::click.::" Some say, "Don't tell em you're recording since they told you the call is already." The recordings says "MAY" which isn't a guarantee that it is. Best to be upfront since, if the rep[ knows their stuff, they might not mind as much and there's nothing like trying to use in-admissible evidence.

Designer 6i in Oracle 9i

Hi,
I have MS Windows XP,Oracle 9.2.0.0.0 and Oracle Designer 6i(6.5.52.2.0 - Config 4.0.12) on my laptop.
I can't install repository - during "Instaling view to Support Core Repository" Repository adm. utility just crashes with some MS error - Error signature ckrau61.exe ..... ntdll.dll.....and we are sorry for....bla bla
When I ran it against Oracle 8.1.7 on the server it installed the repository without any problems.
I tryed to set compability parameter for Oracle 9 to 8.1.7, but than I am not able to open the database.
Can we use Designer 6i with Oracle 9?
All ideas are welcome.
Best regards,
Iassen Houbenov

Hi,
Unfortunately the Oracle9i database is not yet supported on
available versions of Designer 6i.
See the following post:
database connectivity problem
for details on a version supporting the Oracle9i database.
Brian

Import third party designs in an Oracle BPM Process

Hi,
Is there currently any capability in the BPM suite to import third party process designs?

Thanks,
I was asking more in terms of a general 'import' feature that used to be available earlier (rather than BPA to BPM in particular - which is also probably enabled by XPDL)
see this: http://blogs.oracle.com/ptslad/2008/12/hi_folks_i_would_like.html
PS: ARIS is a product in its own standing and not called Oracle BPA Suite now.
http://www.ids-scheer.com/en/ARIS_ARIS_Platform/3730.html
BPA Suite is 'based on' ARIS (and always has been, AFAIK)
http://www.oracle.com/technologies/soa/bpa-suite.html
Regards,
Jang-Vijay

Installing Designer 6i onto Oracle 9.2.0.1.0

I am trying to install Designer 6i on Oracle 9.2.0.1.0. The trouble is I receive an error telling something like (i'm translating from spanis into english) 'a key value for getvalue is not found' and it offers me to retry, continue or abandon.
If i choose continuing, the installer says:
'You can't not install to the same home as Oracle Designer, please enter a new Oracle home name and path.'
But i have no designer product installed yet.
Can you help me, please?

Hello Jose,
Unfortunately, Designer 6i is not currently supported on
the 9.2 version of the database. Only 9i Designer is
supported.
The latest available version of 6i, Release 4.5, is supported on 9.0.1.3 though.
Therefore, I'm unable to really help, as we have not completely tested a 6i/9.2 configuration.
All the latest certification information is as ever
available from Metalink (http://metalink.oracle.com).
Sorry I cannot be of more help.
Regards,
Dominic
Designer Product Management
Oracle

Panel Customizable not showing Oracle BI under Mashups, when in Composer mode

I had created a page with panel Customizable:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:cust="http://xmlns.oracle.com/adf/faces/customizable"
          xmlns:pe="http://xmlns.oracle.com/adf/pageeditor">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1">
      <af:form id="f1">
        <pe:pageCustomizable id="pageCustomizable1">
          <cust:panelCustomizable id="panelCustomizable1" layout="scroll"/>
          <f:facet name="editor">
            <pe:pageEditorPanel id="pep1"/>
          </f:facet>
        </pe:pageCustomizable>
      </af:form>
    </af:document>
</f:view>
</jsp:root>
Earlier, I had installed all jDeveloper extensions
Business Intelligence ADF Task Flow
Business Intelligence ADF View Regions
Business Intelligence Composer
Business Intelligence Logical SQL View Objects
Business Intelligence Soap Connection
I followed the instructions given here
I had included library oracle.bi.jbips in weblogic-application.xml
I had included library oracle.bi.composer in weblogic.xml (both of these steps are from the same instructions)
I have included the following libraries for BI in my Webcenter Portal project:
BI ADF Runtime
BI ADF Taskflow
BI JDBC
BI SOAP Connection Runtime
BI View Object Runtime
BI JIBPS
Then, I right-click on the jspx file shown above (from Application Navigator) and click Run.
After the page shows up, I press Cntrl + Shift + E. Content Editor window shows up.
I select "Add Content". In the popup that comes up, I select "Mash-Ups". After that, "Oracle BI" should appear. But it doesn't
Can someone please help me figure out why I am not seeing "Oracle BI" option in the popup after I select "Mash-Ups"?

Hi Vetsrini,
Many thanks for offering to help. It has just been solved. It was a typo in the XML of the name of the column.
Doh! Obvious now that I know!
- Jenny

JSF 2.0 in Oracle BPM 10g

Is it possible to use JSF 2.0 in Oracle BPM 10.3.2 version?

May be this will be helpful for you:
I see that in the stack trace jsf trying to instantiate the
com.globit.icoport.Email (but not the com.myproject.Email as you point in the English translation)
While your validator is not Email but EmailValidation
com.globit.icoport.Email is reall class name which is tried to be instantiated while com.myproject.Email is just validator id string.
May be you have in your project somewhere else the missed annotation @FacesValidator(value="com.myproject.Email")?

Does the designer not use on 9i?

At the past,i use the designer 6i rel4 on the 8.1.7 a long
time,while i upgrade the database to 9i,i can not use designer.
I have installed 9i client on the client.All of the process
seems Ok.But when i execute the designer,after enter the
Login,the designer will be closed immediately.
Does the designer not use on 9i?
Thanks.

I've been facing the same problem. We installed Oracle Designer
6i R4 (Repository version=6.5.52.2) on Oracle 9i
While creating the repository, some of Designer views failed
(CI_ROOT_APPLICATION_SYSTEMS, CI_CONTAINER_ELEMENTS,...)
Both views, have CONSTRAINTS name as one of their columns.
Oracle 9i, does not accept that name in creating the view. We
renamed the column to CONSTRAINTS1 to let the process go on.
Afterwards, designer is not connecting properly, compaining
that "CDR-20043 - Non-versioned repository has no workarea or
insufficient privileges"
Does Oracle Designer 6i R4 works on Oracle 9i ?????
Please help!

HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!

I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
Oracle installation script generates several errors. I have
tried several attempts, using different options, but they all
generate errors.
Please help. The Oracle Installation scripts appear to be very
buggy... or perhaps they are incompatible with the standard
RedHat 6.1 release. Either way, it is very frustrating.
I have documented one of my (failed) installation attempts below.
Does anyone have any words of wisdom?
I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
2.2.12-2 kernel). RedHat was installed using the standard "Gnome
Workstation" configuration.
The Oralce CD is labeled:
"Oralce 8i Enterprise Edition
Release 8.1.5
for Linux
(c) Oracle Corporation 1999"
I got this CD about one week ago at Oracle OpenWorld '99 in Los
Angeles... it should be their "latest & greatest" version so far.
1. Pre-Installation and ./runInstall
I created an "oracle" Unix account w/ groups "oinstall" (the
primary group) and "dba" (a secondary group).
I created directories /u01 through /u04, belonging to oracle.
I setup .cshrc and sourced it, containing:
umask 022
setenv DISPLAY `hostname`:0
xhost +
setenv ORACLE_BASE /u01/app/oracle
setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
setenv ORACLE_SID cprtest
setenv PATH ${ORACLE_HOME}/bin:${PATH}
setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
setenv NLS_LANG US7ASCII
I downloaded jre116_v5 and installed to /usr/local/jre.
Finally, I executed (from the "oracle" Unix account):
cd /mnt/cdrom
./runInstall
Problem: I got the error (from ./runInstall):
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad address
Workaround: Executed the following commands instead:
cd /mnt/cdrom/install/linux
./runIns.sh
3. runIns.sh and root.sh
I selected the following options (from ./runIns.sh):
Source: /mnt/cdrom/stage/products.jar
Destination: /u01/app/oracle/product/8.1.5
Oracle 8i Enterprise Edition 8.1.5.0.0
Typical (585MB)
Installable Components: Oralce Intelligent Agent 8.1.5.0.0
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Directory for Database Files: /u02
Then (when instructed by ./runIns.sh), I attempted to execute
(from the
"root" Unix account):
cd /u01/app/oracle/product/8.1.5
./root.sh
Problem: I got the error:
"bash: ./root.sh: Permission denied"
The execute bit was not set.
Workaround: I executed:
chmod a+x root.sh
./root.sh
5. Configuration Tools
The Oracle Installer (./runIns.sh) attempted to execute:
A. Net8 Configuration Agent
B. Oracle Database Configuration Agent
Problem: The "Oracle Database Configuration Agent" failed with
the following error message:
"One or more tools have failed. It is recommended but not
required that these tools succeed for this installation.
You can now select these tools, read its details to examine
why they have failed, fix those problems, and retry them.
Or, you can click "Next" to continue."
When I selected the "Oracle Database Configuration Agent" for
more info, I got the following additional details (as the cause
of the error):
"A required command line argument is missing."
The log file
"/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
"Command which is being spawned is /usr/local/jre/bin/jre
-Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
-classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
/8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
tcfg.jar:/usr/local/jre/lib/i18n.jar
DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
/seedloc NO_VALUE /sid cprtest /orahome
/u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
/u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
/gdbName cprtest.parkrussell.com
Invalid Exit Code. The following result code will be used for
configuration tool: 1
Configuration tool Oracle Database Configuration Assistant
failed"
Workaround: There is obviously nothing I can do to fix this
problem. It appears to be an internal bug in ./runIns.sh.
Therefore, I selected "Next" and executed "dbassist" directly.
6. dbassist
I executed:
dbassist
Problem: I got the following error:
"JNLS Execution:oracle.ntpg.jnls.JNLSException
Unable to find any National Character Sets. Please
check your Oracle installation."
Workaround: Press "OK" and ignore the error.
7. dbassist (cont.)
I selected the following options:
Create database
Typical
Copy existing database files from the CD
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Problem: I got the following error:
"CD-ROM drive not detected on this system.
Database not created."
(Note: I've been running the installation scripts from the
CDROM drive this entire time. "df" shows the CDROM drive
mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
Workaround: Abort (which generated the additional error: "Unable
to create database. DBCA-00003: No CD-ROM drive detected.") and
run dbassist again, this time using different parameters.
8. dbassist, again
I executed "dbassist" again and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and iM demos
Global Database Name: cprtest2.parkrussell.com
SID: cprtest2
Create database now
Problem: I got the following error:
"ORA-01012: not logged on"
Workaround: Try, try again.
9. dbassist, one last time
Executed "dbassist" once more and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and interMedia
demos
Global Database Name: cprtest3.parkrussell.com
SID: cprtest3
Output creation script
Then, I executed (from the "oracle" Unix account):
cd /u01/app/oracle/product/8.1.5/install
setenv ORACLE_SID cprtest3
./sqlcprtest3.sh
Problem: I got the following output:
"Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> ORACLE instance started.
ORA-01012: not logged on
SVRMGR> 2> 3> 4> 5> 6> 7>
8> 9> CREATE DATABASE "cprtest3"
ORA-01012: not logged on
SVRMGR> Disconnected."
Workaround: Beats me.
10. sqlplus
I attempted to execute sqlplus, but got the following error
message:
"/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
The execute bit was not set.
Workaround: I executed:
chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
sqlplus
I gave up for now... there were just too many things wrong with
this installation, starting with the very first command I was
supposed to execute (./runInstaller).
I can't fathom why Oracle's installation script has so many bugs.
Am I just doing something terribly wrong?
Please help.
null

I'm using enlightenment version 0.15.5-41, which is more recent
than the 0.15.5-37 version (containing the Oracle installer
patch) that you recommended. Unfortunately, it fails when using
this version.
I also tried installing Oracle using twm, with enlightenment
disabled. This didn't help either.
Furthermore, the errors that I'm encountering in the OUI are
not just toward the end of the installation. They happen from
the very beginning, right after I enter "./runInstall", and
continue every step of the way.
Calvin Mitchell (guest) wrote:
: Check out my thread: "Assistants Failure Toward end of Oracle
: Install" to see where i've gone with this.
: if your running Enlightenment as your window manager you need
to
: upgrade to 0.15.5-37, that will solve the OUI error.
: Let me know if you solve any of your problems.
: Chris Russell (guest) wrote:
: : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
: The
: : Oracle installation script generates several errors. I have
: : tried several attempts, using different options, but they all
: : generate errors.
: : Please help. The Oracle Installation scripts appear to be
very
: : buggy... or perhaps they are incompatible with the standard
: : RedHat 6.1 release. Either way, it is very frustrating.
: : I have documented one of my (failed) installation attempts
: below.
: : Does anyone have any words of wisdom?
: : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
: RAM,
: : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
: : 2.2.12-2 kernel). RedHat was installed using the standard
: "Gnome
: : Workstation" configuration.
: : The Oralce CD is labeled:
: : "Oralce 8i Enterprise Edition
: : Release 8.1.5
: : for Linux
: : (c) Oracle Corporation 1999"
: : I got this CD about one week ago at Oracle OpenWorld '99 in
Los
: : Angeles... it should be their "latest & greatest" version so
: far.
: : 1. Pre-Installation and ./runInstall
: : I created an "oracle" Unix account w/ groups "oinstall" (the
: : primary group) and "dba" (a secondary group).
: : I created directories /u01 through /u04, belonging to oracle.
: : I setup .cshrc and sourced it, containing:
: : umask 022
: : setenv DISPLAY `hostname`:0
: : xhost +
: : setenv ORACLE_BASE /u01/app/oracle
: : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
: : setenv ORACLE_SID cprtest
: : setenv PATH ${ORACLE_HOME}/bin:${PATH}
: : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
: : setenv NLS_LANG US7ASCII
: : I downloaded jre116_v5 and installed to /usr/local/jre.
: : Finally, I executed (from the "oracle" Unix account):
: : cd /mnt/cdrom
: : ./runInstall
: : Problem: I got the error (from ./runInstall):
: : Initializing Java Virtual Machine from
: /usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : Bad address
: : Workaround: Executed the following commands instead:
: : cd /mnt/cdrom/install/linux
: : ./runIns.sh
: : 3. runIns.sh and root.sh
: : I selected the following options (from ./runIns.sh):
: : Source: /mnt/cdrom/stage/products.jar
: : Destination: /u01/app/oracle/product/8.1.5
: : Oracle 8i Enterprise Edition 8.1.5.0.0
: : Typical (585MB)
: : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Directory for Database Files: /u02
: : Then (when instructed by ./runIns.sh), I attempted to execute
: : (from the
: : "root" Unix account):
: : cd /u01/app/oracle/product/8.1.5
: : ./root.sh
: : Problem: I got the error:
: : "bash: ./root.sh: Permission denied"
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x root.sh
: : ./root.sh
: : 5. Configuration Tools
: : The Oracle Installer (./runIns.sh) attempted to execute:
: : A. Net8 Configuration Agent
: : B. Oracle Database Configuration Agent
: : Problem: The "Oracle Database Configuration Agent" failed
with
: : the following error message:
: : "One or more tools have failed. It is recommended but not
: : required that these tools succeed for this installation.
: : You can now select these tools, read its details to
examine
: : why they have failed, fix those problems, and retry them.
: : Or, you can click "Next" to continue."
: : When I selected the "Oracle Database Configuration Agent" for
: : more info, I got the following additional details (as the
cause
: : of the error):
: : "A required command line argument is missing."
: : The log file
: : "/u01/app/oracle/oraInventory/logs/installActions.log"
: recorded:
: : "Command which is being spawned is /usr/local/jre/bin/jre
: : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
: : -classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
: 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
: cle/product/8.1.5/jlib/help-
: 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
: n.jar
: : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
: : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
NO_VALUE
: : /seedloc NO_VALUE /sid cprtest /orahome
: : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
: : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
: : /gdbName cprtest.parkrussell.com
: : Invalid Exit Code. The following result code will be used
for
: : configuration tool: 1
: : Configuration tool Oracle Database Configuration Assistant
: : failed"
: : Workaround: There is obviously nothing I can do to fix this
: : problem. It appears to be an internal bug in ./runIns.sh.
: : Therefore, I selected "Next" and executed "dbassist"
directly.
: : 6. dbassist
: : I executed:
: : dbassist
: : Problem: I got the following error:
: : "JNLS Execution:oracle.ntpg.jnls.JNLSException
: : Unable to find any National Character Sets. Please
: : check your Oracle installation."
: : Workaround: Press "OK" and ignore the error.
: : 7. dbassist (cont.)
: : I selected the following options:
: : Create database
: : Typical
: : Copy existing database files from the CD
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Problem: I got the following error:
: : "CD-ROM drive not detected on this system.
: : Database not created."
: : (Note: I've been running the installation scripts from the
: : CDROM drive this entire time. "df" shows the CDROM drive
: : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
: : Workaround: Abort (which generated the additional error:
: "Unable
: : to create database. DBCA-00003: No CD-ROM drive detected.")
: and
: : run dbassist again, this time using different parameters.
: : 8. dbassist, again
: : I executed "dbassist" again and selected the following
options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and iM demos
: : Global Database Name: cprtest2.parkrussell.com
: : SID: cprtest2
: : Create database now
: : Problem: I got the following error:
: : "ORA-01012: not logged on"
: : Workaround: Try, try again.
: : 9. dbassist, one last time
: : Executed "dbassist" once more and selected the following
: options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and interMedia
: : demos
: : Global Database Name: cprtest3.parkrussell.com
: : SID: cprtest3
: : Output creation script
: : Then, I executed (from the "oracle" Unix account):
: : cd /u01/app/oracle/product/8.1.5/install
: : setenv ORACLE_SID cprtest3
: : ./sqlcprtest3.sh
: : Problem: I got the following output:
: : "Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : With the Partitioning and Java options
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> SVRMGR> Connected.
: : SVRMGR> ORACLE instance started.
: : ORA-01012: not logged on
: : SVRMGR> 2> 3> 4> 5> 6> 7>
: : 8> 9> CREATE DATABASE "cprtest3"
: : ORA-01012: not logged on
: : SVRMGR> Disconnected."
: : Workaround: Beats me.
: : 10. sqlplus
: : I attempted to execute sqlplus, but got the following error
: : message:
: : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
: denied."
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
: : sqlplus
: : I gave up for now... there were just too many things wrong
with
: : this installation, starting with the very first command I was
: : supposed to execute (./runInstaller).
: : I can't fathom why Oracle's installation script has so many
: bugs.
: : Am I just doing something terribly wrong?
: : Please help.
null

Why the default value is not the Oracle recommended?

Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?

>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com

Using Notes and Oracle Client in the same application on Linux crashes

This thread is copied from a thread of the same name under Database - General, since I cannot get any replies there.
Could someone from Oracle PLEASE comment on this.
Our application on Linux loads the Notes client libraries and then the Oracle client libraries. The application will crashes when connectimg to an Oracle server. This is because the T_* symbols in libnnz11.so get fixed up into libnotes.so rather than locally into libnnz11.so where the functions are defined.
#10 0xb4779ea6 in T_malloc () from /opt/ibm/lotus/notes/libnotes.so
#11 0xae7ca050 in CMP_reallocNoCopy ()
from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
#12 0xae7ccf7b in CMP_OctetStringToCMPInt ()
from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
#13 0xae7c91fd in A_X931RandomInit ()
from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
#14 0xaec09e0d in ztcriv ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#15 0xaec09cef in ztcrbp ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#16 0xaec09ca4 in ztcr2seed ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#17 0xaec09c54 in ztcrseed3 ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#18 0xaeb40683 in ztcsh ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#19 0xaea631c4 in kpusattr ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#20 0xaea7847e in OCIAttrSet ()
from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
#21 0xb081cb9f in COCIObject::Connect ()
from /opt/criticalpath/common/bin/libor9i.so
We have circumvented the problem for the time being by making sure that we load the Oracle libraries before Notes, but we cannot go with that as a long term solution.
In my opinion the Oracle library is wrongly linked since all the T_* functions are defined in libnnz11.so. When we load Oracle first, the loader debug trace shows the correct fixups. When we load Notes first, the loader trace shows the incorrect fixups. We are using dlopen(libor9i.so, RTLD_LOCAL) for Oracle and dlopen(libnotes.so, RTLD_LOCAL) for Notes. libor9i.so has a dependency on libclntsh.so.10.1.
An opinion would really be appreciated.
Thanks,
John Unsworth

Thanks again.
We don't have an Oracle support contract because we do not use Oracle ourselves. We supply an application that synchronises data between multiple data servers and server types, of which Oracle is one and Notes is another, as well as LDAP servers and many other types.
Producing a full resolved binary is therefore not an option since the types of data server are configured when the apploication is installed, and then the client software for each server is loaded as required.
The end user of the application supplies the client libraries and has a support contract for the servers, in particular Oracle and Notes in this case. So the other option is for the end user to raise a ticket using his support contract, but he is reluctant to do that since he considers that this is our problem as we supply the application that is having the problem. So we are in a dead water area. We do not want to take out a support contract just to get what is an Oracle product problem resolved. I imagine that this problem is something that has not been encountered before, because our use of the client library in conjunction with other client libraries is probably unusual.
So that is why I am hoping, without any success so far, that someone from Oracle will pick this up.

JSF Designs not usign Oracles BLAF

Similar Messages

Maybe you are looking for