JSF jsValueChangeListener with checkbox

Did anybody try to create using JavaServerFaces, a checkBox and a textBox, and when the checkBox is unchecked the textbox should disable immediatly?
I've tried and it works fine in mozilla but in IE the checkbox doesn't disable immediatly, just after a second click on the page. Does anybody know what's wrong ?
Thanks

this is my code:
<t:selectBooleanCheckbox disabled="#{someBean.disabled}" id="checkBoxId" onchange="this.form.submit()" value="#{someBean.checkValue}">
<t:jsValueChangeListener for="myTextBox" expressionValue="if ($srcElem.checked) { $destElem.disabled=false } else {$destElem.disabled=true}"/>
</t:selectBooleanCheckbox>
<t:inputText id="myTextBox"
               value="#{someBean.textBoxValue}"
               size="3"
               maxlength="3"
               required="true">
<f:validateLongRange minimum="0"/>
</t:inputText>
Can anyone try this scenario and check if it works in IE ?
Thanks

Similar Messages

JSF: Problem with checkboxes using Tomcat

Hello,
I m using Java Sun Creator and I�ve noticed a very strange behavior of checkboxes while running my project with Tomcat (I tried 5.5 and 6.0).
On my JSP I have a tabSet component with 3 tabs. the second tab (the first tab in order is selected per default ) displays some boolean values using checkboxes. I set these values using SessionBean properties in an action method that navigates me to the page with the tabSet component. When deploying the application with JSC the values are correct after loading the page and when I select the second tab after that.
When I start the application with Tomcat, the values are correct after loading the page (I�ve checked it displaying the values in a messageGroup), but when I select the second tab, which should show me these selected checkboxes, all of them and even the session bean properties have the value "false" (I see the result in the messageGroup too)?! I had to include my code to the prerender method of the tabSet-page to get the correct values but that has another bad side-effects!
Does anybody have an explanation for this issue?

More info,
we add all drivers we use for the different databases we support, in this case we use classes12.jar and postgresql-8.2-504.jdbc3.jar
I just let u know that becouse maybe exists conflicts between these two libraries. Could it be?
thanks

How to make a prog. Tree with Checkbox in JSF?

I am facing prob. to how to dev. prog. which contain Tree with Checkbox .
I want to use checkbox because whatever comes under any directory in Tree is selected if I select perticular folder from Tree?
Can you guide me guys ?
Ur help is needed to me.
Thanks,
Harshal Joshi

I have worked whith JSF-s CheckBox components , It has a problem, when I used it with tables and Trees, so I think this components needs to develop.
enyone has other ideas about it, and knows how to do it?

Bug in ADF(10.1.3.2.0) with checkboxes in a table in a pop-up

So I've found a bug in ADF. The bug manifests when I have a dialog window pop-up with a table with many rows(13 or more). Each row has a checkbox in it. If I change the state of 12 or fewer of the checkboxes and click ok, the returnListener will fire. If I change 13 or more checkboxes, the return listener does not fire.
I'll try to create a test case/demo for this. Has anyone else encountered this?

Hi,
I haven't seen this problem, but I normally use a JSF HTML boolean checkbox for ADF editable tables.
<h:selectBooleanCheckbox value="#{row.Enabled}"/>I found that the <af:selectBooleanCheckbox> readonly attribute did not evaluate its EL so I stuck with the JSF component since. You could try this component as a workaround.
Brenden

Returning from a JSF flow with faces-redirect

I'm using Glassfish 4.1 with JSF 2.2.9. I can't figure out how to return from a JSF flow with a redirect. I've tried this in the flow definition xml:
<flow-return id="returnFromFlow">
<from-outcome>/index.xhtml?faces-redirect=true</from-outcome>
</flow-return>
This does the redirect but results in navigation errors on the page, specifically the button that enters the flow again: "Unable to find matching navigation case from view ID '/index.xhtml' for outcome 'select-person'" (the flow is called select-person).
I've also tried appending faces-redirect=true to the action of the commandButton that exits the flow. Now the flow does not exit, it reloads the current page within the flow and says "Unable to find matching navigation case with from-view-id '/select-person/select-person.xhtml' for action 'returnFromFlow?faces-redirect=true' with outcome 'returnFromFlow?faces-redirect=true'"
Exiting the flow with h:link works, but I want to be able to call an action and submit form values with the button so that isn't a good workaround for me.
What's kind of interesting is that navigating between views within the flow DOES work with faces-redirect=true. I can add a "step2" node, and a commandButton with action="step2?faces-redirect=true", and it works. It's just exiting the flow that does not work.
Any ideas?

Hi Frank,
Thanks so much for your response.
Yes, since the user can do a commit prior to exiting my edit task flow, option 1 will not work for me.
Option 2 sounded feasible, but jdeveloper would not let me set the restore point to true, since my btf didn't require a transaction. Is there a step I'm missing here??
The thing that is really getting me when return via the cancel button from this edit task flow, back to my parent task flow, the record pointer is always moving back to the beginning of the data set in my parent task flow. For example,if I have a data set
rec1, rec2, rec3..
On my parent taskflow call it browser task flow, I navigate (via the next button) to rec3, and I click edit. At this point, my edit task flow kicks off, and since both task flows share the same data control, the edit task flow rec pointer is the same as the browse one.
Okay I decide I don't want to change anything in my rec3, so I click cancel.
At this point, when I return back to the navigator task flow, it points me back to rec1 ..
HOwever, the savepoint seems to fix this. When I set my cancel return from edit taskflow to savePoint = true, the rec pointer stays in the correct spot. However, I cannot always do this, because the user can make iterative saves in the edit task flow which (based on your previous email) stales out the savepoint id.
Question, so in this case, how can I make the parent browser task flow call stay on the same record I was just editing, opposed to going back to the beginning of the data set(ie. rec1)??

Report with Checkbox

I am trying to follow the example shown at the below link but it is not working. I am modifying some of the code since I am using version 1.6. Any ideas as to what I may be doing wrong. The checkbox appears and I can select and deselect items but I cannot get P6_HOLDER to hold any of the values of the selected items. Thanks!
http://apex-smb.blogspot.com/2009/01/apex-report-with-checkboxes-advanced.html
First I created a page item called P6_HOLDER.
Next I created a report region (sequence 40) with the below code.
select htmldb_item.checkbox (1, dev_obj_id, 'onchange="spCheckChange(this);"',
:P6_HOLDER, ':') checkbox, dev_id, dev_obj_desc from edm_dev_obj where
dev_id = :P6_TEMP_DEV_ID
**I then created a html region (sequence 1) with the below code**
<SCRIPT src="http://www.google.com/jsapi"></SCRIPT>
<SCRIPT>
// Load jQuery
google.load("jquery", "1.2.6", {uncompressed:true});
function spCheckChange(pThis){
var get = new htmldb_Get(null,$v('pFlowId'),'APPLICATION_PROCESS=CHECKBOX_CHANGE',$v('pFlowStepId'));
get.addParam('f01',pThis.value); //Value that was checked
get.addParam('f02',pThis.checked ? 'Y':'N'); // Checked Flag
gReturn = get.get();
$f('checkListDisp').innerHTML=gReturn;
</SCRIPT>
CHECKBOX List:
<DIV id=checkListDisp>&P6_HOLDER.</DIV>
I then created an application process on Demand called CHECKBOX_CHANGE with the below code
DECLARE
v_item_val NUMBER := htmldb_application.g_f01;
v_checked_flag VARCHAR2 (1) := htmldb_application.g_f02;
BEGIN
IF v_checked_flag = 'Y' THEN
-- Add to the list
IF :P6_HOLDER IS NULL THEN
:P6_HOLDER := ':' || v_item_val || ':';
ELSE
:P6_HOLDER := :P6_HOLDER || v_item_val || ':';
END IF;
ELSE
-- Remove from the list
:P6_HOLDER := REPLACE (:P6_HOLDER, ':' || v_item_val || ':', ':');
END IF;
-- Just for testing
HTP.p (:P6_HOLDER);
END;

Hi
Create a page level validation (fucntion returning boolean) and write code similar to following
DECLARE
v_count NUMBER := 0;
BEGIN
FOR i IN 1..APEX_APPLICATION.G_F01.COUNT LOOP
IF APEX_APPLICATION.G_F01(i) IS NOT NULL THEN
v_count := v_count + 1;
END IF;
END LOOP;
IF v_count = 0 THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END;I take it your report query is similar to following
select apex_item.checkbox(1,"PK_CLMN") Tick, col2, col3 FROM tbl_nameCheers,
Hari

Open dialog box window with checkboxes for each child record - Please Help

Hello Everybody
I have a 10g form with master record and 20 child records. In the child record form, currently there is a “Notes” Editor, which pops up when user click the “Edit” button. In the “Notes” editor, user enters remarks if anything is missing. For example, typical remarks will be: Statement is missing, LOC paper is missing etc.
Now, I would like to replace “Notes” editor with a dialog box. In the dialog box , I would like to add checkboxes with values “Statement is missing” and “LOC paper is missing” etc. along with “Notes” field. The user can select checkboxes. The value of the checkboxes should go in the “Notes” field with the ability to edit it. This way, user doesn’t need to type the most common notes every time.
I have created a “NewNotes” dialog box with checkboxes and multiline text Item. It is pops up when I click on the button. I have also created to WHEN_CHECKBOC_CHANGED trigger for each checkboxes so that the its value will go in a multiline text item.
But, I am not sure how I can link “NewNotes” dialog box to the each record in child record block. I would really appreciate it if anybody could give me some idea.
Thanks,

if i understand correctly you have a note item (based on table) on every child record? when you open the dialog box: how do you put data from notes to dialog box? in the same way as you can write it back ...

Problem with checkbox group in row popin of table.

In table row popin I have kept Check Box Group.I have mapped the texts property of checkbox group to the attribute which is under the subnode of the table.the subnode properties singleton=false,selectioncardinality=0-n,and cardinality=0-n.
if there are 'n' number of records in the table.each record will have its own row popin and in the row popin there is check box group.
the check box group in the row popin belongs to that perticular row.
but the checkboxegroup values in row popins of all the rows are getting changed to the row which is lead selected.
The same scenario (table in the row popin is showing the values corresponding to its perticular row and all the table values in popin are not getting changed to the one lead selected in the main table)is working fine with the table in place of checkbox group in row popin with datasource property of table binded to the subnode
I cant trace out the problem with checkbox group in place of table.
Please help me in this regard.I have to place check box group in place of table in row popin.
Thanks and Regards
Kiran Kumar K

I have done the same thing successfully with normal check box ui element. Try using check box in your tabel cell editor instead of check box group.

Problem with checkbox selection in Tableview

Hi All
I am using table view with 8 columns - in the last 4 columns i have checkboxes for user input - i have a strange problem - when the table has multiple entries - for the last column i can only select the checkbox on line 1 - and i cannot select the checkbox on the remaining entries below - but for the other colums with checkboxes this is not the case
The selection mode for the table is no line selection - since the table is already displayed with input enabled fields - this is to reduce the no of clicks for user
Can anyone point out what is going wrong - how can i fix this - what i am doing wrong ?
Thanks
Sen

Hi
When i click on the checkbox for the 2nd or 3rd rows of the last column - nothing happens - the checkox is still active but nothing happens -
this is the tableview code
<htmlb:tableView id              = "Detail"
                 design          = "ALTERNATING"
                 headerText      = "Header Text"
                 onNavigate      = "onMyNavigate"
                 emptyTableText = "test"
                 onRowSelection = "onMyRowSelection"
                 fillUpEmptyRows = "false"
                 footerVisible   = "true"
                 visibleRowCount = "5"
                 table           = "<%= DETAILTAB %>"
                 iterator        = "<%= iterator %>" >
and this is the code for the last column
<htmlb:tableViewColumn columnName         = "OBSOFLGICON"
                           width               = "3"
                           type                = "user"
                           horizontalAlignment = "CENTER"
                           title               = "Obs" >
      <htmlb:checkbox />
    </htmlb:tableViewColumn>
Thanks
Sen

Problem with checkbox column in matrix

Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil Wydra

Hello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick

Problem with checkbox on table component

Hello i am having a problem with checkbox in table component
i am developing something like a shopping cart app and i have a checkbox in my table component , i want users to select items from the checkbox to add to thier cart, They can select the items from cartegory combobox , my problem is when they select the items from the checkbox if they select another category the alread selected once do not display in my collection opbject please how can i maintain the state of the already selected items in my collection object

Hi,
Please go through the tutorial "Understanding scope and managed beans". This is available at:
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/scopes.html
The details of the selected items need to be stored in an object that is in session scope.
Hope this helps
Cheers
Girish

Problem with checkbox and process

Hallo,
I have a checkbox on my page and now I want to create a process that runs when the checkbox is checked.
What I want to do is: to ckeck wheather the checkbox is check and if this is then to set values.
I don't know if it is right how I check the status of the checkbox. What I also don't really know how I can decide
that all field I go through in the loop get the same value from the XYZ-collection. The value should be the last from
the XYZ-collection.
Thanks, Jade
declare
check integer:=0;
change integer:=0;
begin
check:=:Px_Check;
if (check <> 0) then change:=1; end if;
if change = 1 then
for i in 1..htmldb_application.g_f04.count
loop
htmldb_collection.update_member_attribute(p_collection_name=>'XYZ',
p_seq=>i,
p_attr_number=>5,
p_attr_value=>???);
end loop;
end if;
end;

Hi,
Taking the two issues separately....
1 - When dealing with checkboxes, you have to bear in mind that the submit process will only return the values of those checkboxes that have been ticked into the f04 collection (assuming f04 is the column containing your checkboxes). In order to determine which ones they are, you need to get the value (which should be a row number if you've created the checkboxes by using the Row Selector option) and then use that to get to the values on the actual rows. Something like:
DECLARE
vITEM NUMBER;
BEGIN
FOR i IN 1..HTMLDB_APPLICATION.G_F04.COUNT
LOOP
vITEM := HTMLDB_APPLICATION.G_F04(i);
END LOOP;
END;Then, within the loop, you can use vITEM as the row number. So, if the user ticked items 1, 4 and 6. G_F04(1) would contain 1, G_F04(2) would contain 4 and G_F04(3) would contain 6. Therefore, for you update statement, you can use vITEM for the sequence number of the item to update.
2 - When dealing with collections, if you want to get to the last item in the collection, you can get the member count and use that to get to the member:
DECLARE
vCOUNT NUMBER;
vDATA NUMBER;
BEGIN
vCOUNT := HTMLDB_COLLECTION.COLLECTION_MEMBER_COUNT ('XYZ');
SELECT c005 INTO vDATA FROM HTMLDB_COLLECTIONS WHERE COLLECTION_NAME = 'XYZ';
END;That should get the c005 value for the last item and store it in vDATA. You can then update the ticked items with this value.
Andy

ADF Table with CheckBox - Select/deselect issue

I have seen couple of threads and blogs for ADF table with check box . but none of them exactly matching with my requirement . My Database table does not have any field for check box .
Here is my DB Table
tableA_
A_Id
A_Name
tableB*
B_Id
Requirements :*
1. Display the above tables data with Checkbox . ( if A_Id = B_Id then the checkbox will be checked , else unchecked ) .
2. Select / deselect the check box and save the data . Saving the data , will update only tableB . i,e when a new check box is selected then A_Id value will be inserted to tableB . Similarly , deselecting a checked in data will remove the entry from tableB.
Development :
1. Created a VO where tableB has marked as updateable .
2. Created a transient Boolean variable for checkBox . and modified the getter method of checkbox for returning true/false based on the below condition in the ViewRowImpl Class .
if ( A_Id = B_Id )
return true;
else false ;
3. I have not modified the setter method .
Using the above concept i can view the data with selected checkbox . but the problem is to save the data . because , when I select a checkbox the above coding in the getter method will return false .
Therefore , though i am selecting the checkbox but value of the checkbox has been set as false .
While saving the Data , I am iterating through the VOIterator and observed that a newly selected checkbox value is false . and realized its because of the getter method condition .
Can you please suggest how can I overcome this issue or shall I need to take any other approach ?
Jdev version 11.1.1.5
Regards,
Amitava
Edited by: Amitava on Mar 17, 2012 3:48 PM

You need to go through the ADF page life cycle concepts. In simple words the boolean value in the model is not set while in valueChangeListener. Try adding valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance()); on top in your listener method and see the effect.
Reference:
http://docs.oracle.com/cd/E15051_01/web.1111/b31974/adf_lifecycle.htm

How to handle multiple selection in the Spark List control with checkbox as itemrenderer?

Hi All,
I am using checkbox as an ItemRenderer in spark list.
I have a query.
how to handle multiple selection in the Spark List control with checkbox as itemrenderer?
how to retrieve the selected item label?
Thank you in advance.

Hi there, I'll tweak your code a little bit to something like this:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="vertical">
    <mx:Script>
        <![CDATA[
             import mx.events.ListEvent;
             import mx.controls.CheckBox;
           [Bindable]
           private var mySelectedIndexes:ArrayCollection=new ArrayCollection();
            private function onChange(e:ListEvent):void
               if(CheckBox(e.itemRenderer).selected){
                         mySelectedIndexes.addItem(e.rowIndex);
               }else{
                              mySelectedIndexes.removeItemAt(mySelectedIndexes.getItemIndex(e.rowIndex));
               chkList.selectedIndices=mySelectedIndexes.toArray();
        ]]>
    </mx:Script>
<mx:ArrayCollection id="collection">
        <mx:Object label="Test A"/>
        <mx:Object label="Test B"/>
        <mx:Object label="Test C"/>
        <mx:Object label="Test D"/>
        <mx:Object label="Test E"/>
        <mx:Object label="Test F"/>
        <mx:Object label="Test G"/>
    </mx:ArrayCollection>
<mx:List id="chkList" dataProvider="{collection}" itemRenderer="mx.controls.CheckBox" itemClick="onChange(event);" allowMultipleSelection="true"/>
</mx:Application>

Report with checkboxes

Hi all,
I have a report with checkboxes getting the empno in return
I have
select apex_item.checkbox(1, empno) cbox,a.empno, a.ename,a.mgr,a.deptno from emp a
in the report....
I do have a dummy hidden field(P2_EMPNOS) which stores the empno's into it with comma concatenated(for which i wrote a page process)
DECLARE
vRow BINARY_INTEGER;
BEGIN
:P2_EMPNOS := NULL;
:P2_EMPNOS :=apex_application.g_f01(1);
FOR i IN 2 .. apex_application.g_f01.COUNT
LOOP
:P2_EMPNUMS :=
:P2_EMPNOS
|| ','
|| apex_application.g_f01(i);
END LOOP;
END;
in my next page I want the records that I have selected like this
select a.empno, a.ename,a.mgr,a.deptno
from emp a
where empno in :P2_EMPNOS
I did tried (:P2_EMPNOS),':P2_EMPNOS'
The problem is if I select one checkbox, then in the next page I'm getting that one record....
but If I select multiple, then starts trouble...it says "no data found"...but still the values can be viewed in the next page with comma separated
Can some body help me in this please.
Thanks in advance.
Gora

Hello Varad,
Thankyou for the quick response.
The problem here is....my item is getting the selected values as a string(i guess ;) )
i think we have to figure out how we could break it and send those as single values.
Any more guesses please...
Regards,
Gora

JSF jsValueChangeListener with checkbox

Similar Messages

Maybe you are looking for