JSF Table StyleClass issue for a specific Field inside the Table

Hi There,
Am having an issue of dynamically setting the styleClass for a specific field inside a DataTable. Here is how the JSF code is ..
<h:column>
<h:panelGrid id="column4" columns="1" cellpadding="0" cellspacing="0">
<h:inputText id="numberOfApps" value="#{row.submitNumber}" styleClass="#{row.customStyleClass}" maxlength="6" converter="MyNumberConverter" />
</h:panelGrid>
</h:column>
This Table has a specific column which has a input Text Box where user enter's data. This data will be validated in the bean where in after the validation if its exceeding a limit we should throw an error message and also highlight the field with a specific styleClass.
I am setting the StyleClass dynamically based on the User Input, so that I can display a highlited Error Field on the screen. Strangely enough, styleclass is getting set as expected for the first submit but doesnt show any styles for further submits. Even the existing style is getting removed from the second submit onwards. I am setting this "customStleClass" dynamic parameter as a Bean Property. Am sure these values are properly set coz to make sure I have put an h:output tag inside that table to display the customStyleClass values and they are getting set as expected but I see blank value for the class="" in the source of the Page.
Any help would be appreciated.
Thanks
Edited by: Lalith on Jan 14, 2008 10:23 AM

One option is you find the data element of that field GUID.
Now go to SE11 transaction and in data type put that data element and press where used list. In that select tables.
This will give you a list of tables where that field is used.
But again if there are lots of them it will be difficult to find.
The only option in that case is debug the extractor and find out.

Similar Messages

Table of origin for a specific field in the extract structure

Hello
I'm currently working with the sap bw data source 0HE_SLC_PCP_1 (higher education & research). Now, I'd like to know the name of the table of origin where the GUID 16 (CQGUID; field of the according extract structure) is stored on the R/3.
Can someone tell me how I can find that table? Unfortunately, the SAP documentation doesn't contain that data source, only e.g. 0HE_SLC_REG_1 --> http://help.sap.com/SAPHELP_NW04s/helpdata/EN/38/26957aad7545e2b4d79aa4675cfa18/content.htm
Thank you for your help
Patrick

One option is you find the data element of that field GUID.
Now go to SE11 transaction and in data type put that data element and press where used list. In that select tables.
This will give you a list of tables where that field is used.
But again if there are lots of them it will be difficult to find.
The only option in that case is debug the extractor and find out.

Search Help on Table Control - Fill more than one field in the table?

Hey everyone,
I have built a screen with a Table Control on it... the fields of the table control are linked to an internal table... The internal table has the line type of a structure I've defined in the data dictionary. Within that structure in the data dictionary, I've linked some fields to search helps (For example, a MATNR and CUSTOMER search help)... I've defined in the structure definition which fields from the search help are to be returned to which fields in the structure.
The problem is, even though I have the search help set to export both the customer number and location when using the search help on the customer field, it still does not fill the location field within the table. Is this a limitation of using search helps within table controls?
I'm also finding that by defining the search help through the structure, instead of directly within the screen, the search help round button does not show up on the field, yet I can still press F4 to bring up the search help. Is there a reason why it's not showing the search help clickable button even though it works fine using F4?
For doing search helps in Table Controls, is it better to just build the search help, attach it directly to the field in the table, and then after the user picks the single field, use the PAI to run a select and fill the rest of the fields required?
Thanks,
Dallas

Hi Dallas,
(1)
What i understood is that you added a search help by defining it in the internal table type for a field customer number..in the search help you have 2 fields customer number and location...user press the search help ..then you need to fill 2 different fields or 1 field?
if you need to fill the customer location or location (only one) then you need to set the "import" in the search help for whichever is required.....
if you need to fill 2 or more different fields..then you can use the technique you have mentioned last , to do a select in PAI and fill the fields....but this you can use if the combination for the fields is unique...eg: u have customer number and location..if customer X can be mapped to location X and location Y..when a select statement is done there are 2 options..so in such cases it is better to leave the option to the user otherwise if there is a clear mapping like customer X can be mapped only to location X then you can use the select..
(2)
usually when you define it as a type in the internal table the icon doesn't show up..but you can do alternative like mentioned..go to the table,find the search help for the required field if present or create a new one if required and place the search help mentioned in the screen itself..so as to see the icon...sometimes users are adamant that they need the search help icon to be seen..so it depends on if your user
(3)
as in the example of customer number and location mentioned we can provide them different search helps and do the needful processing in PAI to fill the fields
Table controls may be used for different purposes and requirements....even a checkbox,push button can be placed as a field in table control and used,but yes most of the time requirements are like what is mentioned in your case...
Regards
Byju

Insert "0" for all NOTNULL fields in a table

Hi...
am having an small issue, i need a insert a one recoed in all my DB tables as "0" for all NOTNULL fields in a table, i have so many NOTNULL fields in my tables .
is there any other way to insert these records insteasd of write insert statement manually for all NOTNULL fields.
Thanks in Advance ...

user13393409 wrote:
Hi...
am having an small issue, i need a insert a one recoed in all my DB tables as "0" for all NOTNULL fields in a table, i have so many NOTNULL fields in my tables .
is there any other way to insert these records insteasd of write insert statement manually for all NOTNULL fields.
Thanks in Advance ...Hi,
Try This
ALTER TABLE Table_name
MODIFY col_name DEFAULT 0;Regards
Umi

Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!

Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
      1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
      2. Enhancing online maintenance in customized material master maintenance:
      Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
      In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
      If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
      Application examples for standard field selection:
      The field is mandatory and is to be flagged with a "?".
      The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
      The following data is required for each field:
            a) Field name        (T130F-FNAME)
            b) Field selection group (T130F-FGRUP)
            Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
            You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
            Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
            c) Maintenance status (T130F-PSTAT)
            List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
            d) Reference        (T130F-KZREF)
            This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
      3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
      Add the fields to central field table T130F (see above).
      Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
      Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
      For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
      If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
      Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
      As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
            a) Add the customer-specific fields to include CI_MMH1.
            The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
            Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
            b) Activate include CI_MMH1.
            c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
            d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan

Include a field in the table maintenance generator

Hi All,
There is a Z table with MATNR and another numeric field and the table maintenance generator exists for the table. The requirement is to include another field for MAKTX ( Material description) in the table maintenance generator with input disabled. Is it possible to do the same in the table maintenance generator else please suggest me the best solution.
Thanks in Advance.

Hi Srinivasa,
This is quite simple, first add the field MAKTX into the Table and activate it .
Now again generate the Table maintainence for the table.
from Table maintainence generator go to the main program
there click the screen maintained for Table maintainence generator .
in the Pbo of the screen write the following code.
assume table name is table1.
Loop at screen.
if screen-name = table1-maktx.
screen-input = '0'.
modify screen.
endif.
endloop.
this will automatically disable the material description field in the Table Maintainence Generator.
This is will solve your problem
Regards,
Madhavi

How to find user exits for a specific field

hi,
    How can we find a user exit for a specific fields .
as i know Three ways to search user-exits
1. SE80 look includes in a packages with name user-exits
2. by zreport which will fetch user-exit in a T-CODE
3. SMOD
but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
Please suggest me.
Thanks and Regards ,
Rahul Singh.

Hi Rahul,
Here is the procedure to create field exits.
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
u2022     Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
Step 2: Go To Field Exit Transaction
u2022     The transaction to create field exits is CMOD.
u2022     You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
u2022     From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
u2022     After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
u2022     From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
u2022     After choosing this menu path, a dialog box will prompt you for the appropriate data element .
u2022     Enter the data element name and click the u2018Continueu2019 pushbutton.
u2022     Now, you will be able to create the function module associated to the data elementu2019s field exit.
Step 4: Create Function Module
u2022     You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
u2022     In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
u2022     You can add an identifier (an underscore followed by a single character ).
u2022     The first function module for a data elementu2019s field exit must be created without an identifier.
u2022     To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
u2022     After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
u2022     Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
u2022     From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
u2022     Here you will add your desired functionality for the field exit.
u2022     Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
u2022     You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
u2022     After coding the function module, you must remember to activate it.
u2022     Use the Function module -> Activate menu path to activate the function module.
u2022     At this point, you can return to the field exit transaction.
u2022     You should be able to 'green arrow' back to this transaction.
u2022     When you return to the field exit transaction, you will see an entry for the newly created field exit.
u2022     At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
u2022     Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
u2022     This step is only needed if you want to make a field exit local.
u2022     To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
u2022     In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
u2022     In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
u2022     If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
u2022     If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
u2022     The field exit must be active for it to be triggered by the system.
u2022     Activate the field exit by choosing the Field exit -> Activate menu path.
u2022     After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
and in the coding part, You can write your logic to display the output of that field. and activate it.
once you complete the above,
Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
Hope it helps.
Regards
Radhika
Edited by: Radhika Pande on Nov 26, 2009 7:58 AM

Drop down in the selection for the field from the table

Hi.
i want to put the drop down for the field from the table fo which i dont know the number of entries for the field zregion1 of the table zbwcntry.
please tell me how to use the function module and what could be the line of codes.
the drop down is for the select option on the slection screen of the classical report.
please help .

HI,
Check below code..it may help you.
REPORT Zbunu .
TYPES :BEGIN OF STR ,
       MATNR TYPE MATNR ,
       END OF STR .
DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
       VAR TYPE MARA-MATNR .
PARAMETERS : S_MATNR TYPE MATNR ,
              P_MATNR TYPE MATNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MATNR .
SELECT MATNR FROM MARA INTO
CORRESPONDING FIELDS OF TABLE ITAB UP TO 1000 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE         = ' '
    retfield               = 'MATNR'
PVALKEY                = ' '
   DYNPPROG               = SY-CPROG
   DYNPNR                 = SY-DYNNR
   DYNPROFIELD            = 'S_MATNR'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = 'X'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
tables
    value_tab              = ITAB
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
   PARAMETER_ERROR        = 1
   NO_VALUES_FOUND        = 2
   OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Ansumesh

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED. I don't know if an option of configuration adjustment exists in Dreamweaver that corrects the problem. It is Dreamweaver CS4 - Version 10.0 build 4117.

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

Deleting a row based on a field in the table

Hi,
How do I programatically in Java delete a row in a table based on a specific field in a table? For example, I want to delete a specific row by a zip code.
thank you

try this
public void deleteSpecificRow(){
                          // 1. Access the binding container
               DCBindingContainer bc = (DCBindingContainer)getBindings();
              // 2. Find a named iterator binding
               DCIteratorBinding iter =
                 (DCIteratorBinding)bc.findIteratorBinding("YourIteratorName");
               //4. create RowSetIterator Object
               RowSetIterator rsi = iter.getViewObject().createRowSetIterator(null);
                rsi.reset();
               //delete all rows
                while (rsi.hasNext())
                    Row current=rsi.next();
             //check your condition here, if yes remove the record
            current.remove();
                    rsi.next();
   rsi.closeRowSetIterator();
}Edited by: M.Jabr on Nov 24, 2011 5:59 PM

Need help in Populating a Z-field in the table "MARD"

Hi Group,
I have a requirement like as under:
1)
Need to add a field in the transaction MM01/02/03 screen in the view u2018Plant data / stor. 1u2019. And this field should go into the table u2018MARDu2019 table, by appending the structure and adding this field details in it.
2)
Once I post a value into this field thru the transactions (MM01/MM02/MM03) , I need the value in the screen to be populated into the table u2018MARDu2019 in the Appended Structure field.
Could you please help me out by getting a proper User Exit or BADI which fulfills the requirement?
in Summary, please let me know a User Exit or BADI which will update the Z-field of the table 'MARD'.
Thanks for the help in advance.
Regards,
Vishnu.

please check , it might help you.
How to add fields to MM01 Transaction
How to add a new field in MM01 with CONCEPT as a field?
How to add a new field in MM01, with say contaminent as a field?
HI ALL, How can i add new field in mm01 basicdata1 screen
Add button in MM01 Transaction
i want to add the one field in mm01 application how can i add the field?
If you dont get the answer still , please search the forum you will get many links for your requirement
Regards
Satish Boguda

Fields missing in SM30 after adding new fields to the table

Hi ABAPers,
I added a new field & marked another field as primary key in the table. Then I generated the table maintenance view for the table in SE55 and adjusted Database utility SE14.
When i saw the table in SM30. The number of fields in the overview screen of SM30 shows less field then existing in table. i.e in my table i have 10 fields(3 primary). in SM30 it shows only 5 fields(3 primary + 2 normal fields)
In SE51, the overview screen of the table show less fields in the field list..
I want all the fields in the Table maintenance overview screen. Please suggest me a way forward friends..
Note: the system is 4.0B.
Thanks...Suresh Kumar

Hi
You have to re-generate your dialog for SM30 by table maitenance generator.
- From Se11 go to table maitenance generator
- Choose update icon
- Set flags for NEW FIELD
- Go to expert
- Set flag to re-generate dynpro
Message was edited by: max bianchi

How do I search for a specific word in the code using Dreamweaver?

I need to search for a specific word in the code for all of my website pages. How can I do that using Dreamweaver?

To search local files of a Defined Site in DW...
Open the Find & Replace tool with Ctrl + F
Change the Find In dropdown to Entire Current Local Site
Change the Search dropdown to Text or Source code
Add the text to find in the Find field
Add the text to replace in the Replace field (or nothing if you just want to delete the text)
Hit Replace All

Code for reading particular fields from the file placed in application

hi,
code for reading particular fields from the file placed in application server in to the internal table.

Hi,
Use the GUI_UPLOAD FM to upload the File into ur Internal Table.
DATA : FILE_TABLE TYPE FILE_TABLE OCCURS 0,
         fwa TYPE FILE_TABLE,
         FILENAME TYPE STRING,
         RC TYPE I.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
    WINDOW_TITLE            = 'Open File'
   DEFAULT_EXTENSION       =
   DEFAULT_FILENAME        =
   FILE_FILTER             =
   INITIAL_DIRECTORY       =
   MULTISELECTION          =
   WITH_ENCODING           =
CHANGING
    FILE_TABLE              = FILE_TABLE
    RC                      = RC
   USER_ACTION             =
   FILE_ENCODING           =
EXCEPTIONS
    FILE_OPEN_DIALOG_FAILED = 1
    CNTL_ERROR              = 2
    ERROR_NO_GUI            = 3
    NOT_SUPPORTED_BY_GUI    = 4
    others                  = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE FILE_TABLE INDEX 1 into fwa.
FILENAME = fwa-FILENAME.
    CALL FUNCTION 'GUI_UPLOAD'
         EXPORTING
              filename                = filename
              FILETYPE                = 'DAT'
       IMPORTING
            FILELENGTH              =
         TABLES
              data_tab                = itab
         EXCEPTIONS
              file_open_error         = 1
              file_read_error         = 2
              no_batch                = 3
              gui_refuse_filetransfer = 4
              invalid_type            = 5
              OTHERS                  = 6 .
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Regards,
Balakumar.G
Reward Points if helpful.

Add columns with custom fields in the table control of MIGO

Hi,
I have to add custom fields in the table control view of item in the MIGO. I have added the fields in the GOITEM structure and i am able to display it in the item details tab. I want the same fields to be visible as columns in the table control view of the items.
I found that TV_GOITEM is the control in SAPLMIGO program referring to the table control of items but it is referring only to the standard fields available in Screen 200.
Please let me know if there is any screen exit or option to add the custom fields in the control TV_GOITEM.
Thanks.

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

JSF Table StyleClass issue for a specific Field inside the Table

Similar Messages

Maybe you are looking for