JSK version needed for installing NWDS 2.0.19

Hi All ,
Can anyone tell me the JDK version to install NWDS 2.0.19 .

Hi Anuradha,
Please install j2sdk-1_4_2_19-windows-i586-p.exe before installing NWDS 2.0.19.
Thanks
Arun

Similar Messages

Cant unninstall lightroom 5.4 needed for install update 5.5, i have delete all file and registry but install fails

Cant unninstall lightroom 5.4 needed for install update 5.5, i have delete all file and registry but install fails again and again, now i i cant use lightrrom .. grins.
I use SSD disk and i cant have lot of uninstal file (have to clean disk often)
Thanks for help

Hello Jeff,
Many thanks for your answer, i use windows 8.1! I have found the problems: For install the news version the install need the old installer (but i delete all installer, cause they use a lot place on hard drive (SSD)).
I have desinstall the whole Adobe and réinstalled it, i have save the whole installer on a external disk. So when the installer asked the old installer i indicate to programm my external disk ans all works good now.
Many thanks for you help, i have just do not to delete old file (sad to have to save old installler just for install the new).
Wallie
(sorry my english)

Docs needed for installing siebel in solaris 10 x86, Urgent..!!!!!!!!

Docs needed for installing siebel in solaris 10 x86
Thanks
Kishore
Edited by: Kishore P on Aug 11, 2010 6:03 PM

If it's documentation you're after, always go straight to Siebel Bookshelf!
http://download.oracle.com/docs/cd/E14004_01/books/SiebInstUNIX/SiebInstUNIXTOC.html

When i try and update my itunes to the version needed for ios7, it says my older version of itunes can not be uninstalled.

when i try and update my itunes to the version needed for ios7, it says my older version of itunes can not be uninstalled.
it's annoying me now as it won't let me put music on my phone.

Download iTunes here: http://www.apple.com/itunes/download/
If you're trying to connect your iPod to a new computer that doesn't have your iTunes library on it already then see Recover your iTunes library from your iPod or iOS device.
tt2

Prerequisites needed for installing R12 in linux (64-bit)

Hi,
Please list the OS Prerequisites needed for installing R12 (Vision dB) in RedHat ES. Please also let me know whether it will support 64-bit
Thanks,
Anand

I do not think it is possible to paste the whole page. However, please find below all the details which are relevant to Red Hat Enterprise Linux AS/ES 4.0
Kernel Requirements & Settings
Red Hat Enterprise Linux AS/ES 4.0: 2.6.9-42.EL
Edit the /etc/sysctl.conf file to configure your kernel settings. After editing the file, use the "sysctl -p" command or restart the system to invoke the new settings.
kernel.semmsl: 256
kernel.semmns: 32000
kernel.semopm: 100
kernel.semmni: 142
kernel.shmall: 2097152
kernel.shmmax: Half the size of the physical memory (in bytes), and at least 2147483648
kernel.shmmni: 4096
kernel.msgmax: 8192
kernel.msgmnb: 65535
kernel.msgmni: 2878
fs.file-max: 65536
net.ipv4.ip_local_port_range: 1024 65000
net.core.rmem_default: 262144
net.core.rmem_max: 262144
net.core.wmem_default: 262144
net.core.wmem_max: 262144
Required Packages
- binutils-2.15.92.0.2-21.x86_64.rpm
- compat-db-4.1.25-9.i386.rpm (32-bit)
- compat-db-4.1.25-9.x86_64.rpm
- control-center-2.8.0-12.rhel4.5.x86_64.rpm
- gcc-3.4.6-3.x86_64.rpm
- gcc-c++-3.4.6-3.x86_64.rpm
- glibc-2.3.4-2.25.i686.rpm (32-bit)
- glibc-2.3.4-2.25.x86_64.rpm
- glibc-devel-2.3.4-2.25.i386.rpm (32-bit)
- glibc-devel-2.3.4-2.25.x86_64.rpm
- glibc-common-2.3.4-2.25.x86_64.rpm
- gnome-libs-1.4.1.2.90-44.1.x86_64.rpm
- libstdc++-3.4.6-3.i386.rpm (32-bit)
- libstdc++-3.4.6-3.x86_64.rpm
- libstdc++-devel-3.4.6-3.i386.rpm (32-bit)
- libstdc++-devel-3.4.6-3.x86_64.rpm
- libgcc-3.4.6-3.i386.rpm (32-bit)
- libgcc-3.4.6-3.x86_64.rpm
- make-3.80-6.EL4.x86_64.rpm
- pdksh-5.2.14-30.3.x86_64.rpm
- setarch-1.6-1.x86_64.rpm
- sysstat-5.0.5-11.rhel4.x86_64.rpm
- xscreensaver-4.18-5.rhel4.11.x86_64.rpm
- openmotif21-2.1.30-11.RHEL4.6.i386.rpm**
- libaio-0.3.105-2.x86_64.rpm
- libaio-0.3.105-2.i386.rpm (32-bit)
- libaio-devel-0.3.105-2.x86_64.rpm
Software Requirements
- ar
- gcc
- g++
- ksh
- ld
- linux32
- make
- X Display Server
Verifying Host Names
1) Verify that the /etc/hosts file is formatted as follows:
127.0.0.1 localhost.localdomain localhost
<ip_address> <node_name>.<domain_name> <node_name>
2) Verify that the /etc/sysconfig/network file is formatted as follows:
HOSTNAME=<node_name>.<domain_name>
3) If the /etc/sysconfig/networking/profiles/default/network file exists, remove it.
4) If you changed any files in the previous steps, restart the system.
Modifying the Number of Open File Descriptors
Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes (If the current value for any parameter is higher than the value listed in this document, then do not change the value of that parameter):
* hard nofile 65535
* soft nofile 4096
* hard nproc 16384
* soft nproc 2047

Details needed for installing Information Broadcasting

Hi,
Our customer is interested in installing the Information Broadcasting feature in their BW system. The BW version they have is SAP BW 3.5, data is fetched from different Legacy systems into the BW systems. No R3 is involved.
We are in the process of preparing the Requirement documents for installing the Information Broadcasting. What are all the information do we need to get from the customer? What are all the questions do we need to ask them?
Regards,
Murali

Hi Murali,
I need your help to set up Bex Broadcasting. We have a new implementation of BI 7 version year ago, I'm a BI developer and we don't have a team on BI, where as we have a team on ECC. If I want anything in BI, I need to give all specifications to my administartor who doesn't have much knowledge on BI.
My problem is I can able to broadcast reports from BI backend, but not from Bex Analyser. When I open Workbook in Bex Analyser, I can able to see enabled Bex broadcasting option in Context Menu from tools icon. But when I click on it nothing is happening. We don't have portal, I need to broadcast reports from Bex Analyzer.
Would you please assist me to know all required components needed to get Bex Broadcaster via Bex analyser. I need to assist my system admin to get this.
We are on BI Netweaver 2004s.
SAP GUI for Windows:
Release - 710 Final release
Patch level - 5
Recently upgraded Bex Analyser:
BI Add on 7.X(based on 7.10)
Support Package 10
Thanks in advance.
Regards,
Aparna

R&R version needed for "selective" software recovery?

The version of R&R that came on my machine is 4.0. Is it true what I've read that updating to a later version will allow a recovery to factory state however I will get the options to NOT install the bloatware e.g. Norton, MSOffice trial, etc?
If so, what version of R&R do I need for this function? I've read a number of posts that seem to be indicating the v4.2 is causing other issues and would like to know others experience.
Thanks in advance

Hi PK,
there is a sticky thread titled by 'Please read this before you start a topic'.
There are interesting statements concerning a standalone ITS. Do you have an idea
why somebody created this thread?
There is a second sticky thread titled with 'ITS FAQ...'. Also interesting - indeed.
best regards
Tobias

Conflicting info on which version needed for G4

First, thanks to all the frequent posters here. I'm very impressed by the knowledge in this forums. I've learned a lot, but still haven't found my solution.
I ordered a processor upgrade for the G4 (Sawtooth). The instructions say to first update the firmware to 4.2.8, if necessary. I'm supposed to check the current version by using Apple System Profiler after booting into OS9. I bought this 'puter used, with 10.2.8 installed, and no OS9 installed. I've never used OS9.
I did get a gray "PowerMac G4 Software Install SSW version 9.0" CD with the purchase. When I tried to boot from that, I get a welcome screen, and when the progress bar gets to about 15%, the process simply stops. (The CD drive has been replaced with a DVD RW, if that might matter.) Now, an Apple article (120068) regarding the firmware upgrade says to use 9.1. But, I just want to boot into 9 to check the current firmware version, not update it (yet). From what I've read here, I thought this machine should be bootable by 9.0. I even ran across an Apple table somewhere here stating the multiple versions of 9 that were permissible for this G4, including 9.0. (I almost suspect that the update has already been done by the previous owner, as he was a savvy user, and did A/V production with it. It's also been working under Tiger flawlessly.)
I also tried dragging a copy of the 9.0 system folder onto my secondary HD, which shows to have the OS9 drivers installed. This was bad news trying to boot this way. A message said it could only boot from the original media (the CD, no?), and it got locked into a loop. Got out by booting with Option pressed, thanks to a tip read here
So, is there another way to check the firmware rev without obtaining 9.1? I visited a site recommended in here for system CDs and found a retail 9.1 offered, but for $160 (yikes!). I really have no need to use 9 in the future, having no software for it, I just need to boot it to check the firmware rev.
Suggestions? Thanks for your time!!!

Hi, rotordude -
There is a way to check the firmware version (Boot ROM version) without having to trust the accuracy of the software in OSX or OS 9.
Boot the machine into Open Firmware - restart; immediately press the Command-Option-O-F keys, keep that combo held down. The machine will quickly boot into Open Firmware, which is coded on the logic board, not on any disk.
You will be presented with a text-based screen. On the second line will be this string -
Apple PowerMac3,1 #.#.#f# Boot ROM
The "PowerMacc3,1" portion will identify it as being a G4 (AGP), aka "Sawtooth", model.
The "#.#.#f# Boot ROM" will have numbers replacing the "#" character - this shows the current firmware version.
For example, on that line in Open Firmware my G4 (AGP) displays
Apple PowerMac3,1 4.1.8f5 Boot ROM
indicating the firmware version is 4.1.8, which I know to be correct - I have applied the 4.1.8 firmaware update (now no longer available), but not yet the 4.2.8 firmware update (I do not have OSX 10.2 or later on this machine).
To get out of Open firmware, enter exit at the prompt and press Return; or enter boot at the prompt and press Return; or use the force restart button on the front of the Mac (the small raised-face button under the power button, the left-hand one of the two small buttons).
It has been reported by some users that once the firmware on their machine was updated, it would no longer boot to the original OS (non-OSX) version that shipped with the machine. Based upon comments, though, this does not appear to be a universal result of updating firmware.
Take a close look at the "PowerMac G4 Software Install SSW version 9.0" CD that you got with the machine. What is the part number shown in small print on the right-hand side of the label? The diskl that came with my G4 (AGP) shows this info at that location -
SSW version 9.0.4
691-2657-A
- and the CD is titled in large print "PowerMac G4" with a sub-titled "Software Install".

Storage capacity needed for installing window OS and lots of educational software in window OS

I going to buy 13" MacbookPro with Retina Display with 2.6ghz i5 dual core processor and 8GB RAM.
I need to install Window 8.1 Pro and mutiple(a lot) of educational software inside Window OS.
128GB or 256GB PCle-based flash storage should I choose to make sure enough capacity and smooth performance to me?
Thanks.

You may want to inquire in the Boot Camp forum here:
Boot Camp
to see if Windows can play well with the Retina display.
If those wise people say it does not, consider the entry level non-Retina 13-inch MBP. It comes with a 500GB conventional hard drive with the option of a 1TB drive, still has a DVD drive, and you can upgrade RAM yourself--it's a ten-minute job. Another plus is that model seems to have very few reports of mechanical trouble in these forums.
However, if all you want to run is Win, I cast my vote with Esquared: consider a Windows laptop. You can get a 17-ich i7 for much less than any Mac notebook.

Configuration needed for Installing Oracle 9i-R2 on Linux Itanium

I need a specific documentation for Installing Oracle 9i-R2 on Linux Itanium server.

Oracle does not support running the 32-bit database on Itanium.64-bit Oracle database software only supports 64-bit for Itanium.
Check Metalink Note:266043.1 for details
Virag

What are the requirement need for installing of PI7.1

Hello All,
What are the Hardware and Software requirements required for Installing PI 7.1. Installation of PI 7.1. need 64 bit operating system or can I install 32 bit operating system.
Can anybody send me the installation document on PI 7.1.
Thanks & Regards,
Venkat K

Hi,
yes only 64 bit is supported read page no 15 of below link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
Installation guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00004f25-6190-2b10-2c8b-fa419234c28b
Re: SAP PI 7.1 minimal hardware
chirag

Which archived adobe flash version need I install for a galaxy pro 10.2 notebook

Which archived version of the adobe flash player do I install for a galaxy pro 10.2 notebook?

Locking thread, duplicate thread at Adobe Flash Player installation version for Galaxy Pro 10.2 notebook
Please avoid creating more than one thread for the same issue. It doesn't get your problem answered quicker, but it can lead to confusion as folks post to two different, yet identical, threads.

HT1222 I dont know what password they need for installing the latest version of itunes because it isnt the same as my apple id

How am i supposed to download the latest itunes version if i dont know the password because its not the same as my apple id password

The password being requested is, as for any Mac OS X software update or application installation, the password to your user account in Mac OS X, or the user name and password to an account in Mac OS X that has administrator privileges if your account does not.
Regards.

Version compatibility for installing WLS and ADR for ADF 11.1.2.0

Hi,
Can anyone pls let me know what versions of Weblogic server, Application Development Runtime (ADR) is required to install Oracle JDeveloper 11.1.2.0
B'coz currently I am trying to install Weblogic server, ADR and ADF separately and try to deploy and publish an application in ADF 11.1.2.0 verison.
I am trying this for the past 4 days, but still can't deploy an application successfully in ADF 11.1.2.0 version. Pls let me know the version compatibility.
Thanks,
Aparna

Hi John,
Even I saw the link that u had mentioned. From where can I install these ?
I had downloaded WLS 10.3.5 and ADR 11.1.1.5 separately. But from where do I install the patch ?? I didn't find a proper source to download.
Pls help.
Thanks,
Aparna

Wich midias need for instalation BW 3.5 ?

I wan to install BW 3.5.
I don't know wich instaltion number midias i need.
Like instalation master, export, etc.
Thanks a lot.

So i have SAP NetWeaver u201804 SR1 Installation Guide
SAPBusiness Warehouse 3.5 Document Version 1.4 u2013 February 14, 2007
In page 18 " Preparing Required DVD"
These are the required DVDs:
u2022 SAP NetWeaver u201904 Installation Master DVD
u2022 SAP NetWeaver '04 COMPONENTS DVD
Just 2 midias ?? How about Kernel ?? Instalation Export ??
This Instalation Guide is confuse.

JSK version needed for installing NWDS 2.0.19

Similar Messages

Maybe you are looking for