JSM - Creating Job Documentation from Job Request itself
Hi all,
I am still exploring JSM, and I know its possible to create Job Request (Job Req) from Job Documentation (Job Doc).
But is it possible to create the reverse (Job Doc from Job Req) ?
This will be great, if the user is creating Job Req from "Detailed" version (compared to "Basic"), which has similar entries and tabs, as Job Doc.
I did read somewhere that its possible, but I never find any documentation or SCN/blogs on this.
Thanks in advance
Regards
Shahul
This was answers below, in the comment area by Volker.
How to configure SAP's standard Job Request form - Part 2
Hi Shahul,
the user triggers the Job Doc creation from within the Incident or Change Request in the JSM assignment block, but then the data from teh Job Request is automatically taken over for the Job Document.
So starting the creation and pushing the save button is manual work, but the filling out the Job Doc is done automatically.
Kind Regards
Volker
Regards
Shahul
Similar Messages
-
Creating job documentation from Job request
Hello Esha,
depends. If you run EhP1 of SAP Solution Manager you can use transaction SLFJ instead of SLFN (prerequisite: multi-transaction type handling is setup). SLFJ comes with the correct action profile already assigned.
If you use SLFN or a custom copy of SLFN, please assign the Job Management action profile. See implementation guide (transaction SPRO) for more information in section "Integration with Service Desk".
I recommend to view the following tutorial:
http://service.sap.com/~sapidb/011000358700000332872009E/index.htm
BTW: Please use the Solution Manager forum.
Regards,
Martin
Please follow us on SDN:
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/u/25168834 [original link is broken] [original link is broken]
/people/martin.lauer/blog
and SAP Service Marketplace:
http://service.sap.com/jsmThis was answers below, in the comment area by Volker.
How to configure SAP's standard Job Request form - Part 2
Hi Shahul,
the user triggers the Job Doc creation from within the Incident or Change Request in the JSM assignment block, but then the data from teh Job Request is automatically taken over for the Job Document.
So starting the creation and pushing the save button is manual work, but the filling out the Job Doc is done automatically.
Kind Regards
Volker
Regards
Shahul -
How to find JOB code from job title
Hi Experts,
Could you please let me know the procedure to get the JOB Code from JOB titles.
Regards,
Sairam.Hi Sairam,
Please make use of "Search Term" field in report S_AHR_61016497 - Existing Jobs
Regards,
Dilek -
SAP Job Documentation from BC-XBP Interface
Does BC-XBP or any other interface provide access to SAP side job documentation (that is visible in SM37 transaction) for third party applications?
Thanks,
ParagHello Daniel Garrido,
did you find an answer to this question? I`m facing the same situation and do not know how to delete hundreds of jobs.
I would be very happy to hear from you.soon
Alexandra Berner -
Hello experts,
i post this thread because there is a new problem with a reports server running in Oracle Application Server 10.1.2.3.0
We configured a reports server like this:
Engine-ID: rwEng
Classpath:
initEngine: 1
maxEngine: 3
minEngine: 1
engLife: 50
maxIdle (minutes): 30
Cache Size (MB): 30
Timeout (minutes): 15
max Connections: 20
max Queue-size: 1000
trace-option: none
We queued 15 daily executive jobs.
But these jobs disappear after a while. So the queue list is empty!
sometimes after a week and sometimes after a few days this jobs disappear from queue.
May you can help me solving this problem?
Thanks a lot.
Best regards
FlorianHello, I to have had this problem with a brand new Mac Pro and new install. I did note that, whilst I didn't use the migration assistant I did copy over my preferences from an old system though and may have corrupted something.
My buddies loaded, presumably from AOL system as they appear no matter where i log in from. But a new buddy that i tried to add simply appeared, pulsed for a few seconds and disappeared. I was able to chat with the friend and screen share, audio chat and video chat with them but could only make a connection if I was quick to do so from adding them again to my buddy list.
To resolve the issue I deleted all iChat preference files:
com.apple.iChat.AIM.plist
com.apple.iChat.plist
com.apple.iChat.SubNet.plist
com.apple.iChatAgent.plist
that were stored in my ~/Library/Preferences folder.
I did have to re-sign in to iChat but that is only a user name and password which gets re-stores in my Keychain so no bother.
Hope this helps as it worked for me!
Just -
Unable to create Warehouse Task from Warehouse Request in EWM
Hi All,
I have created Inbound Delivery in ERP system which created Inbound Delivery Notification in EWM and then converted to Inbound Delivery (Warehouse Request).
In Warehouse Request screen, using follow on functions --> Warehouse Task, I have been trying to create Warehouse Task but I am facing the below error.
There are no unpacked or packed warehouse request items for processing
Message no. /SCWM/UI_TODLV002
Diagnosis
For the transmitted search criteria, the system could not find any warehouse request items or handling units for which a warehouse task can be created.
The system can only find a warehouse request or handling unit if the following conditions are fulfilled:
The correct process was selected according to the document searched for:
Putaway for inbound delivery
Stock removal for outbound delivery request
Posting change for posting change
Stock transfer for internal stock transfer
The warehouse number entered matches the warehouse number in the warehouse request.
The warehouse process type is set in the warehouse request.
Movement control confirms that the delivery is relevant for picking.
No warehouse requests have yet been created for all of the requested quantity.
System Response
The system does not propose any warehouse request items or handling units for processing.
The above settings already in place for me, but still I am facing the error,
Request your help in resolving this issue.Hi Juergen/Sandip,
We have material number and quantity in Warehouse Request.
But Warehouse Request has 'Locked" indicator and PPF actions tab at item details has no details and "Validations" tab shows
I have created "Packaging Specification" for this material but didn't pack. Do I need to pack it?
Please suggest. -
Creating billing document from billing request PO number
Hello All,
I am creating Billing document ( Debit Memo) from BiCS Billing Reqeust ( kind of Sales order) , that time the PO of BR is getting updated on BIlling documents's Screen ( at item level---> on PO data tab) butsometimes it is not getting updated in VBRK table fields is BSTNK_VF .
Thanks in advance.
Edited by: busam nandana on Sep 8, 2010 10:20 AMdid you try using BAPI,
BAPI_BILLINGDOC_CREATEMULTIPLE.
also read Function Module Documentation on this BAPI's usage. -
Hi,
In solution manager work center, after the change document is created the job documentation is to be generated. One of the steps to create job documentation is assigning the logical component. I'm facing an issue with this step. The logical components aren't getting displayed thus the job documentation is not getting created. What could be the possible solution to this?
Regards,
EshaHello Esha,
if I understood your issue correctly your creating the Job Documentation from the Job Chaneg Document, so you are using the ChaRM integration?
In that case you'll have to check IBase assigned to the Job and Change Request. The IBase has to point to a production system.
The program also filters for logical components, which have the (logical) System, i.e. combination of System ID and Client, the IBase is pointing to, assigned in the role production.
So you need an logical component which includes the selected system in role production.
BTW: Please use the Solution Manager forum for JSM related questions and visit our new FAQ http://wiki.sdn.sap.com/wiki/display/SM/FAQJobScheduling+Management
Regards,
Martin
Please follow us on SDN:
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/u/25168834 [original link is broken] [original link is broken]
/people/martin.lauer/blog
and SAP Service Marketplace:
http://service.sap.com/jsm -
Getting error in project creation from Appropriation Request
Hi SAPians,
When I am creating a project from appropriation request having same coding mask option(Option 1 in AR type), the project structure is not created as desired. Like I am copying a project from template I-00001 with WBS I-00001 at first level. But when I am creating project in AR by copying this std. project , created project definition is I-00001 and level 1 WBS is I-00001-01. Because of this project entire project structure has changed.
can anybody help me this new created project structure as desired.
Thanks & Regards
RamshaHi,
we also faces the same issue since replace optionis not there on IMA11, what we did was, we created only 1 st level wbs through IMA11 and then inluded the rest using CJ20N using template.
Regards,
SL -
Integration of Job Request and Job Documentation in Solution Manager 7.1
Hi all,
In Solution Manager 7.1, after creation of Job Request, when i try to click on CRM Document number of the respective Job Request, it asks me to Select Business Role instead of guiding it to the screen of the incident management wherein Job Documentation is to be created from Job Request.
Kindly assistHi Vivek,
I have SAP_ALL with my user id and have also given role "SAP_SM_CRM_UIU_SOLMANPRO" and selected "SOLMANPRO" as well , but in the resultant incident it does not have the tab of Job Scheduling Management from which we can create job document for the requisite job request
Regards
Nishu -
How to delete Job Documentation in JSM Solution Manager
Hi,
I am trying to define some job documentation in "JSM Solution Manager", how can I delete unwanted Job Documantation there.
Don't see any remove button.
Thanks for help
sahmadHello,
We too are facing same issue. Can you please share your solution.
Regards,
Mudasir. -
Batch job creating PO's from PR after a certain date in PR
Hello,
We need to create PO from PR based on certain number of days (4 days ) from the delivery date in PR. That is if delivery date in PR=30.4.14, then the PO should be created on 26.4.14 by the batch job (30.4.14 less 4 days ).
How to achieve the above !
regards
PamelaHello ,
Please find the links
PR converted to PO batch job
Background Batch job for PR & PO -
Create new jobB,fill jobB with part of jobA & delete this part from jobA
Hi guys,
Here Job A = CATALYST_1 , Job A = CATALYST_MOGI.Could any one tell
me how to resolve this? Any information will be help full.
it is necessary create a new job with part of the programs that exist in
the Job JCATALYST_1 , and alter this job, deleting the part that will contain
in the new Job CATALYST_MOGI.
It´s required to create a copy of the Job CATALYST_1 like Job CATALYST_MOGI.
In the Job CATALYST_1, delete the part that contain the execution of Mogi jobs.
In the Job CATALYST_MOGI, delete the part that contain the execution
of others Jobs and just need to stay in this job execution that refers to MOGI Jobs.
Tthe execution that refer to Mogi Jobs is highlighted with "*in the below lines, that
must be delete of CATALYST_1
And must be executed in the new Job CATALYST_MOGI.
Currently the log of Catalyst_1:
Data Hora Texto mensagem
Regards,
Sonam
Edited by: sonamrata on Apr 20, 2010 11:53 AM
Edited by: sonamrata on Apr 20, 2010 11:57 AMHi guys,
Here Job A = CATALYST_1 , Job A = CATALYST_MOGI. We have job CATALYST_1 with log entries as below.
Now I have to 1)create a new job CATALYST_MODI (I can do this using SM36 tcode.)
2)put some ofthe log entries into job CATALYST_MODI(highlighted by "* iin below logentries)
3) delete these entries from CATALYST_1..
In other words I have to include programs ZSYSDI_PARTS_HOLD_RELEASE and ZSYSDI_CALL_SHIP
in the new job CATALYST_MODI and delete these programs from Job CATALYST_1.
Currently the log of Catalyst_1:
Data Hora Texto mensagem
16.04.2010 10:40:44 Job executado
16.04.201010:40:44 Etapa 001 executada
(program.ZSYGLI_CONTROL_INTERFACE, variante ,
nome usuário MAESTRO)
16.04.2010 10:40:44 Enqueue em tabela Interface 0
"*16.04.2010 10:40:44 Buscando Diretórios das Interfaces
"*16.04.2010 10:40:44 Busca Arq. de ls -tr
'*/me/proj/BZLSBYSNG/SDI2034/InBound/sap/MOGI
"*16.04.2010 10:40:45 Start JOB CTR_INTRF-SD.I.2034M
'*ZSYSDI_PARTS_HOLD_RELEASE
"*16.04.2010 10:41:44 Aguardando JOB CTR_INTRF-SD.I.2034M 0
"*16.04.2010 10:41:44 Busca Arq. de ls -tr
/me/proj/BZLSBYSNG/SDI0404/InBound/sap/MOGI
16.04.2010 10:41:44 Start JOB CTR_INTRF-SD.I.0404M ZSYSDI_CALL_SHIP
16.04.2010 10:41:44 Busca Arq. de ls -tr
/me/proj/BZLSBYSNG/SDI2034/InBound/sap/SOR9
16.04.2010 10:41:44 Start JOB CTR_INTRF-SD.I.2034S
Regards,
Sonam -
Creating FBA user from the timer job
Hi,
I'm trying to create FBA users from the timer job,
The code to it:
MembershipCreateStatus createStatus;
MembershipUser user = Membership.CreateUser(strUserID, strPassword, strEmail, "Test Question", "Test Answer", true, out createStatus);
switch (createStatus)
case MembershipCreateStatus.Success:
//SendMail
break;
case MembershipCreateStatus.DuplicateEmail:
//Log in to the error file
break;
But it throws the error:
Unable to connect to SQL Server database in the timer job
Regards,
Sachintimer job has its own app.config, which is completely separate from the web.config
plus, this is a terrible idea.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
Background Job call from a program
Hi all,
We have a program which runs for max of 5 minutes (say).
It is scheduled to run every minute in SM36 so that it keeps continuing to run.
But sometimes even when the previous job is running the one starts up, thereby creating inconsistent results.
So we need to call the job from the running program itself.
How should we go abt this ? Is there any other way available to solve this ?
Thanks in Advance,
Regards,
Vivek KHi,
Managing Jobs from the Job Overview
Use
The Job Overview, or Job Maintenance, screen is the single, central area for completing a wide range of tasks related to monitoring and managing jobs, including defining jobs; scheduling, rescheduling, and copying existing jobs; rescheduling and editing jobs and job steps; repeating a job; debugging an active job; reviewing information about a job; canceling a job's release status; canceling and deleting jobs; comparing the specifications of several jobs; checking the status of jobs; reviewing job logs; and releasing a job so it can run.
Procedures
Specifying Jobs
To display the Job Overview screen, choose CCMS ® Jobs ® Maintenance or call Transaction SM37. Before entering the Job Overview screen, the system first displays the Select Background Jobs screen, where you must select the criteria for the jobs you want to manage. These criteria include:
Job name (which can contain a wildcard (*) to select jobs with related names oru2014by using the wildcard aloneu2014any job). Required.
Name of the user who scheduled the job (the wildcard is allowed here as well). Required.
Job status
Planned or actual start time of the job.
Job start condition or event linked to the start condition
Job step
When and how often the job runs, or " periodicity"
You can also choose Extended Job Selection, where you can more precisely define the specific criteria that determine which jobs to select. If you have administrator Authorizations for Background Processing, you can display jobs in all clients. Without this authorization, only jobs in the client that you are logged on to will be displayed.
Once you have set the criteria for you job selection, choose Execute.
Managing and Monitoring Jobs
Once you have called the Job Overview screen (Transaction SM37 or CCMS ® Jobs ® Maintenance) and selected which jobs you want to manage as described above, you can choose from a wide range of management tasks.
To copy a single existing job, choose Job ® Copy.
To reschedule or edit job steps or attributes of a single job, choose Job ® Change. A job step is an independent unit of work within a background job. Each job step can execute an ABAP or external program. Other variants or authorizations may be used for each job step. The system allows you to display ABAP programs and variants. You can scan a program for syntax errors. You can also display the authorizations for an authorized user of an ABAP job step.
To repeat a single job, choose Job ® Repeat scheduling.
To debug an active job, choose Job ® Capture: active job. Only a single selection is allowed. If an active job seems to be running incorrectly (e.g., running for an excessively long time), you can interrupt and analyze it in debugging mode in a background process, and then either release it again or stop it altogether.
You will be able to capture a background job only if you are logged on to the SAP server on which the job is running. To find server information in the Job Overview, select and mark the job, then choose Job ® Job details.
To review information about a job, choose Job ® Job details. Details displayed can include:
current job status
periodicity, or the repetition interval
other jobs linked to the current job, either as previous or subsequent jobs
defined job steps
spool requests generated by the current job
To cancel a job's "Released" status, select the job or jobs from the Job Overview list and choose Job ® Release -> Scheduled.
To cancel a job from running but keep the job definition available, select the job or jobs from the Job Overview list and choose Job ® Cancel active job.
To delete a job entirely, select the job or jobs from the Job Overview list and choose Job ® Delete. Jobs with the status of Ready or Running cannot be deleted.
To compare the specifications of more than one job, select the jobs from the Job Overview list and choose Job ® Compare jobs.
To check the status of jobs, select the job or jobs from the Overview Job list and choose Job ® Check status. This allows you to either change the job status back to Planned or cancel the job altogether. This is especially useful when a job has malfunctioned.
To review job logs, select a job or jobs with the status Completed or Canceled from the Job Overview list and choose Goto ® Job log.
To release a job so it can run, select a job from the Job Overview list and choose Goto ® Release.
Regards,
Jagadish
Maybe you are looking for
-
Printing issue of report output
Hi Friends, I am trying to print a report having one record but getting printed two pages instead of one. The first page contains the output data and second page contains 'Data statistics and number of records' which can be accomodated in same pa
-
Calling a javascript on load of jsff page
I have a jsff page which is loaded as a taskflow from region. i tried to call an alert function on load of jsff page as follows: <af:clientListener type="load" method="jsMethod"/> <af:resource type="javascript"> function jsMethod() {
-
Problem to open RAW format (from camera NIKON 3200) in Photoshop cs5
Hello I just have bought new camera NIKON 3200 and I have Photoshopo cs5. The problem is that I cant edit pictures RAW format in my Photoshop program cs5. I upgrade camera raw 6.7.0339 and it doesnt work. What I should do to everything goes fine....?
-
Macbook Air 2013 256ssd , sandisk or samsung?
Hello , I just wonder which ssd I have in my Macbook , It says : APPLE SSD SD0256F Is it sandisk or samsung?
-
Hi there, I am running bootcamp and when I am starting to install Windows XP I can't actually move into the setup because the keyboard won't work. Is there anyone who found a solution? Thanks.