Json rpc and json rpc cpp integration

hi frnds,
I am new with json rpc and json rpc cpp, all i just need a way to talk to c++ code from my servlet/jsp without using jni, i got following link by searching on google but not able to implement it, so i am looking for json rpc with json rpc cpp
http://www.ibm.com/developerworks/webservices/library/ws-xml-rpc/
thanks in advance
Irfan

Anyone ?

Similar Messages

SharePoint 2013 and SQL Reporting Services Integration Mode

I'm setting up a production environment with SQL Server 2012 SP1 (Clustered) and SharePoint 2013.
I successfully setup the integration using PowerShell (Install-SPRSService & Install-SPRSServiceProxy). I can see the SQL Reporting Service on the CA Services and it's started, I've also created the Services Application without any issues (And linked it
to my web application). However the Report Server Integration feature is missing from my site collection and so are the content types. I even tried creating a new site collection and no dice.
Appreciating any help.
Best,
MI

Hi MI,
As per my understanding, I think this issue is caused by you haven’t install the Reporting Services add-in for SharePoint Products or is not installed correctly. If we install the Reporting Services add-in for SharePoint Products after the installation of
the SharePoint Server, then the Report Server integration feature and the Power View integration feature will can be activated for root site collections. For other site collections, we can manually activate the features. To fix the issue you occurred, we should
install or reinstall the Reporting Services add-in for SharePoint Products.
For more information about Install Reporting Services 2012 SharePoint Mode for SharePoint 2013, please see the following article:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Comparisons between WLI and SeeBeyond e*Gate Integrator?

Does anyone have any point of view about similarities and differences between
WLI and SeeBeyond e*Gate Integrator? I have some familiarity with e*Gate, and
I'm just starting to learn about WLI (although I'm pretty familiar with J2EE
and WebLogic Server).
It appears to me that WLI assumes that data collaborations between systems will
go from binary to XML, then perhaps to transformed XML, and then to binary.
I'm perfectly happy with using XML, but I wonder if it would be practical in
some cases to skip the XML representation and translate directly from one
binary representation to another. From what little I know of e*Gate, the most
straightforward transformations are just binary to binary, although XML
transformations are available.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] ; SCJP; SCWCD

OBI EE 11g and BI Publisher 11g integration training

BIP Experts,
Does anyone know of any good OBI EE 11g and BI Publisher 11g integration training?
I am struggling to create even the simplest of Reports?
Or does anyone have 10 mins to give me a quick once over of how I can create two simple Reports?
One using OBI EE as a DataSource and one using a OBI EE Report in the Web Catalog?
Kind Regards,
Andy Cox
OBI Technical Support - UK

This blog shows how to set this up with BI 10.1.3.3.2 and DB 11.1.0.6
http://www.rittmanmead.com/2008/04/21/oracle-apex-and-bi-publisher/
Full certification matrix can be found here
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12692.pdf
Greg

Steps for portal and Microsoft LDAP server integration

Hi,
Could any one guide me steps for portal and Microsoft LDAP server integration. Need it urgently.
Thanks in advance.
Regards,
Niraj

Please don't cross post in multiple forums..

PS module and SD Module are integrated?

Dear All,
How is the PS module and SD Module are integrated?
I am thinking the linjk is only through the WBS element .please guide me if am wrong.
But I am not able to get the data flow across these two modules.
Is there any other setting to be done in the IMG ?
My client scenario needs a close interaction(flow) of data from PS to SD
I am trying to establish this llink through DIP profile and RRB .As i am not familiar
either with DIP Profile or with RRB.In these circumstances i seek your help.
Rewards are assured for timely & valuable help.
Thanking you,
Best Regards,
R.Srinivasan

Hi Ramanujam,
Please find below the complete stuff reg PS integration with SD Module:
SD INTGRATON WITH PS (Project Systems)
PS SD integration happens during Milestone billing...
Below is whole process-
Billing Plan for Milestone Billing
Milestone billing means distributing the total amount to be billed over multiple billing
dates in the billing plan.
As each milestone is successfully reached, the customer is billed either a percentage of
the entire project cost or simply a pre-defined amount.
During sales order processing, the system determines from the item category whether a
billing plan is required and, if so, which type of plan
The type of billing plan that is determined at this point is set up in Customizing and
cannot be changed in the sales document.
Billing plans for periodic billing and milestone billing plans for project-related milestone
billing have different overview screens so that you can enter data relevant to your
processing.
For example, for milestone billing, you must be able to enter data to identify the
individual milestones.
IMG configuration requires:-
1. Maintain billing plan types for milestone billing in OVBO.
2. Define date description in SM30 - V_TVTB.
3. Maintain Date Category for Billing Plan Type IN OVBJ.
4. Allocate date category in SM30 - V_TFPLA_TY.
5. Maintain date proposal for Billing Plan Type in OVBM.
6. Assign Billing Plan Type to Sales Documents Type in OVBP.
7. Assign Billing Plan Type to Item Categories in OVBR.
8. Define rules for determining the date in OVBS.
Milestone billing is typically used for billing projects, such as plant engineering and
construction projects. Such projects often include a series of milestones that mark the
completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones
are also assigned to the billing dates in the billing plan.
Each milestone-related billing date is blocked for processing until the Project System
confirms that the milestone is completed.
Delivery-relevant order items for which a milestone billing plan applies are billed on the
basis of the requested delivery quantity and not on the total of the confirmed quantities.
The connection between the project and the sales document item is made in the individual
schedule lines of the item. Each schedule item can be assigned to a network in a project.
To display the project-related data for a schedule line, proceed as follows:
In one of the overview screens of the sales document, select
1. Item -> Schedule lines.
2. Mark the schedule line and select Procurement details.
The following figure shows an example of milestone billing where only the Contract have
been billed :
Order Item Turbine 100,000
Billing Plan
Billing date Description % Value Billing Block Milestone Billing Status
01-10-94 Contract 10 10,000 - x x
01-03-95 Assembly 30 30,000 x x
01-04-95 Maintenance 30 30,000 x x
01-05-95 Acceptance 30 30,000 x x
01-06-95 Final invoice .. .. x
Network/Activities
Milestone Estimate Actual
Assembly 01-03-95 01-03-95
Maintenance 01-04-95
Acceptance 01-05-95
For each billing date in a milestone billing plan, you can specify whether the billing
date is:
1. fixed
2. Always updated with the actual date of the milestone
3. Updated with the actual date of the milestone, if the date is earlier than the
planned billing date for the date
Following is the SD & PS integration scenarios where milestone billing & Periodic billing plays the important role for these integration:
Milestone billing is typically used for billing projects, such as plant engineering and
construction projects. Such projects often include a series of milestones that mark the
completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones
are also assigned to the billing dates in the billing plan. The connection between the project and the sales document item is made in the individual
schedule lines of the item. Each schedule item can be assigned to a network in a project.
PS-SD Integration as below:
A) Billing plan, at each WBS element, network and Activity level.
B)DIP profile which is assigend to item category. DIP for resource related quotation works only with ECP ( easy cost planning).
C)sales pricing - generally, there r 2 types of sales pricing in PS . lumpsum contract and unit rate contract.
D)BOS - bill of Services. which has to be activated. It is industry specific solution. If BOS is activated you also have integration for vendor RFQ and Analysis.
Further pls provide ME ur mail id , will mail some zip files regarding integration of SD module with all other module including PS.
Project System(PS) works for any project e.g construction, operation or any large projects where project management tools are required. it integrates all modules may be like MM for vendor process or for RFQ etc or say may be SD for Resource related quotation with the help of DIP profile or Milestone process etc. IT is largely used in construction projects. IT helps in controlling the whole of project from one single screen and it works with 3 elements WBS element ( work break down structure), Network and Activity.
Please go throgh this Please check this links perhaps they may help.
http://help.sap.com/bp_imcv1500/IMC_US/HTML/preconfigured_scenarios.htm
ETO:
http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E83_EN_DE.htm
http://help.sap.com/bp_bblibrary/500/HTML/E46_EN_DE.htm
MTO:
http://help.sap.com/bp_bblibrary/500/HTML/V66_BB_EN_US.htm
http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E70_MTOQuotProc_EN_DE.htm
PS - SD integration are on
1.Billing pan, at each WBS element, network and Activity level.
2. DIP profile which is assigend to item category. DIP for resource related quotation works only with ECP ( easy cost planning).
3.sales pricing - generally, there r 2 types of sales pricing in PS . lumpsum contract and unit rate contract.
4. BOS - bill of Services. which has to be activated. It is industry specific solution. If BOS is activated you also have integration for vendor RFQ and Analysis.
5. resource related Billing
The specified item was not found.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

BW 7.0 and CRM 5.1 Integration

Hi,
It will be great if anybody can give me any Docs or details on the BW 7.0 and CRM 5.1 Integration.
Regards
Vishwa
email: [email protected]

Hi,
I wanted the details of Implementing BW 7.0 With the connectivity with CRM 5.1 and what relevant cubes and reports (Standard Business Content) to install in BW 7.0 and how to extract data from CRM 5.1 to BW 7.0 (with stress of CRM ANALYTICS related cubes). Is there any standard document or PDF which gives this information.
Thanks and Regards
Vishwanath

Reports 6i and WeBDB 2.2 Integration Issues

1. I have installed reports6i andintegrated with WebDB 2.2 by running the fo
llo
wingScripts:
oracle_home\report60\server\security\rwwwvins.sql webdb and
\oracle_home\report60\server\security\rwenable.sql
as described in the webdb& reports6i integration issues document in oracle r
epo
rts6i beta site.
Afterinstalling, when i logged to webdb as webdb user, i was able to see sev
er
access and rdf access options in webdb 2.2
However, when i log as an userwhere i have created forms components i am una
ble
to access the abovecomponents. (there is no documentation on what privileg
es
needs to be providedto the user., however i had given grants to following ro
les
withRW_ADMINISTRATOR, RW_POWER_USER, RW_DEVELOPER AND RW_BASIC_USer
null

Hi Matt,
You didn't mention but do you also wish to install the database(8i) on the same machine ?
I am also trying to install all these products(+8i and designer 6i) on the same box but I am concerned more about the min. resources needed before I get started.(I put up a question about it on the 6i Forum, but nobody has answered yet !)
The correct install order should be Forms/Reports 6i then Forms/Reports 6i Server and then WebDb 2.2.
Forms /reports server needs a http listener and installs en configures the WebDb listener for the job.(you are prompted for this during tho have the install process).This is handy if you are intending to use WebDb anyway. When you install Webdb it detects the already installed WebDb listener and does not reinstall.
You do have the SYS password on the database you will use to stored the WDK and WebDb schema.
About installing the demo.....
I dont' think there are any special issues.I have never done it.
If you are intending to install an 8i database on the same box there are some important things to consider with respect to the install order and what products in which Oracle home must be installed.
1.Forms/Reports first in the default_oracle
home.
2.Then Oracle 8i in a 2nd oracle home call
it ora81 for example.
3.Then WebDb in the non oracle 8i home !!
This is just a quick summary.
If you run into any problems let me know
Good Luck.
Dave.

CRM 5.0 and microsoft exchange server integration

Hi,
I'm facing problem in setting up email integration in SAP CRM.
What I woul like to achieve is that an email sent to the call center should be see the email in this way:
from: customer email
to: [email protected]
The exchange server responsible says that it is not possible to do this but exchange has to change the "to" domain before sending the email and so the call center agent should see in the inbox an email like this:
from: customer email
to: [email protected]
Is it right? Any hint?
Can you help me?
Thanks in advance.
Roberto

Hello Roberto,
E-Mail rerouting is possible with an Exchange server. We use an adress [email protected] provided from the Exchangeserver. The mail is then forwarded to [email protected] to be retrieved by our CRM System for further processing. Please ask your Exchange admin again. I think he has to get wome more information about configuration possibilities.
Regards
Gregor

Exchange and Office Web Apps Integration - Wrong Url to Outlook Web App port 444

Hi,
I'm trying to setup Office Web Apps integration with Exchange 2013. Office Web Apps are working fine with SharePoint 2013 and the WAC servers are listed as in a healthy state.
When trying to open an office document from OWA I get the usual "Sorry...we ran into a problem. Please try again"
However I have noticed that the URL that OWA is passing WAC is in the format: https://exchangeservername.domain.com:444/owa/[email protected]/wopi/files...
This is the backend server address! All the internal and external urls for owa, ecp, ews etc are set to https://mail.domain.com and they all seem to be working fine. Client Access and Mailbox roles are on the same server.
If I change the url to https://mail.domain.com/owa/[email protected]/wopi/files... then the office file opens correctly in Office Web Apps
How do I correct the URL that OWA is sending Office Web Apps?
Thanks!

Hi DJL,
If everything works well except open document via OWA, it seems Exchange server 2013 has been configured correctly.
Please follow me to check Office Web Apps Server settings and Integration.
OWAS settings
1. Certificate:
Come from a trusted CA, include FQDN of OWAS farm in SAN field.
Exportable private key.
Friendly name must be unique within Trusted Root Certificate Authorities store.
2. Farm:
New-OfficeWebAppsFarm with following parameters
-InternalURL is the FQDN of the server that runs OWAS
-ExternalURL is the FQDN so that OWAS can be access on the Internet
-CertificateName is the friendly name of the certificate to be used for HTTPS
3. Explore this URL https://mail.domain.com/hosting/discovery
If OWAS works well, you can see a WOPI-discovery XML file in web browser.
Integration
1. Configure OWAS URL via EMS,
Set-OrganizationConfig –WACDiscoveryEndpoint https://mail.domain.com/hosting/discovery
2. WAC stands for Web Access Components.
Check App Log the 140 and 142 Event IDs for MSExchange OWA.
142 means the discovery of the OWAS was successful, 141 means something went wrong.
3. Enable OWAS.
By default, OWA Virtual Directory is already enable WAC Viewing on both public and private computer.
Please run "Get-OwaVirtualDirectory | FL *wac* "to check whether both “WacViewingOnPublicComputersEnabled” and “WacViewingOnPrivateComputersEnabled” parameter is True.
4. Method to collect logs on OWAS.
Run following command in OWAS powershell prompt:
Get-OfficeWebAppsFarm | FL *log*
More details to refer:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Motion 4 and MacBook Pro with integrated nVidia 9400M Grapichs?

Hi. I wonder if somebody has experience using Motion 4 (and/or other motion graphics software)with a MacBook Pro 13" or 15" with integrated nVidia 9400M Graphics.
So far I know those laptops are very good for video editing and Photoshop, but I don't still know about people that animate with them.
Thanks for your answers!

Heya Mark,
Thank you for responding. The information provided leaves a lot to consider. Personally I would consider frequent solo layers or lack of expectance for realtime performance for anything moderately complex in HD comparative to simple, minimal Motion projects as originally stated. But everyone has their own opinion I suppose...
Checked out the first few seconds of your linked reel - pretty cool. Like most reviewing reels I only looked at the first 15 seconds since I consider that the just of the reel. Then I went back and re-watched and I was especially interested in the West Marine flag. Nice fluttering of the flag - produced using only Motion? So you produced that solely on the MBP described in your post? What was the FPS on the project file? Have a project file with included media to download for testing?
Best regards,
OP,
With my profession I use many different systems/configurations on a daily basis. So yes; I have tested the performance on comparative configurations. Cinema 4D does not = Motion and "pretty good" is an opinionated statement. Much like "acceptable" or any other opinion you will receive from your inquiry that begs the opinions from others that may omit specific hardware and/or project configurations comparative to your consideration. Maybe you should try going to a Apple store and testing a project yourself on the machine you're considering... Just a thought.
Yeah your MBP will work - it's just that there's better machines out there can produce better results. If your consideration is the best that you can get for your budget then you'll get the best performance that you can get. I described it as "acceptable". If it's a black/white, yes/no question of whether your MBP consideration will work with Motion then the answer is yes. Otherwise you're asking for an opinion that may contain uncertainty. That's the deal. Best of luck on your hardware choice. I hope it works out for you! The lack of responses tells a tale for me. If this thread was flooded with responses form others saying "yeah the 13" MBP with integrated gfx card works GREAT with Motion" then I might consider the hardware. But two responses saying "acceptable" and "surprising amount" tells me that there's not much to hope for. If you're surprised by the results that your hardware performs at then you should not expect much from the get-go. I expect high performance from Mac Pro - I'm not surprised by its performance.

Copy and pasting - maintaining content integrity when copy from pdf and pasting to word doc

My firm is currently using an older version of Acrobat to transfer portions of medical report to a word document format. We are only taking select excerpts and not exporting the whole document. As of now, i copy and paste the needed piece to word but the integrity of the transfer is terrible. Many misspelled words, wrong spacing, characters replacing letter, etc...We are curious if this issue could be resolved by upgrading to the latest version of Acrobat. Thanks for your help!

If you could give the version of Acrobat and post some before and after screen shots it would help us understand the issue (yes, avoid any personal info). Was the original PDF created as a scan? If so, is it clearscan or searchable? There are many issues that are hard to comment on because we don't know how the PDF was produced or what has been done to it in the meantime. It may be that an upgrade would help, but not necessarily. If you have a spare machine available, you could always download and install the trial to see if it would resolve the issue -- I would not install the trial over your current version.

ECC 5.0 and CRM 7.0 Integration Questions

Hello,
We are on ECC 5.0 and are part of a global implementation that is putting in CRM 7.0.
We have a couple of issues/questions.
1. We want to integrate ECC Internal Orders with CRM Contracts and Orders. However we don't see the ECC Internal Order type SAPS in ECC 5.0. What release/plugin would give us SAPS Internal order type
2. We currently use CS and PM in ECC, and we have equipment and func. locations. Do we need to be on a certain version/plugin to integrate Equipment and Func. Locations with CRM iBase?
3. Any tips/suggestions on integrating Vertex with CRM for taxes.
Thanks
chris

Hi
Here are the Answers
1. We want to integrate ECC Internal Orders with CRM Contracts and Orders. However we don't see the ECC Internal Order type SAPS in ECC 5.0. What release/plugin would give us SAPS Internal order type
- This is release indepedant- It is been available from R/3 4.7 so you should have it, if you dont have an SAPS order type, you have 2 options
1. Create your own SAPS Order type
2. Define RFC from Client "000" and push the order type. This must be available in "000" as a standard delivery, may be your Basis did not move the order types properly.
2. We currently use CS and PM in ECC, and we have equipment and func. locations. Do we need to be on a certain version/plugin to integrate Equipment and Func. Locations with CRM iBase?
Yes you can have the equipment and Functional Locations, but for FLocs to download to CRM you need ECC6.0 with Sp6 anything below cannot be integrated or downloaded with CRM7.0 .. for Equipments any versions are fine and you do all configuration and customization in CRM
3. Any tips/suggestions on integrating Vertex with CRM for taxes.
Its a broad question, SAP provides standard integration option to vertex, and you integrate as needed..
let me know if you need anything else.

Portal and Netscape LDAP server integration

Hi,
I am trying to integrate Netscape LDAP server (6.0) with portal server 7, but
having lots of trouble doing that.
I've followed the instructions in the developer guide and completed the following
steps:
1. added a CustomRealm named defaultLDAPRealmForNetscapeDirectoryServer in config.xml
and modified the entries to fit my environment.
2. Deployed ldapprofile.jar and customized the env variables.
After these two steps, nothing happened. Then I did the third step:
3. added a iPlanet Authenticator to the realm CompatibilityRealm, which is my
default realm for the server.
However, after step 3, I wasn't able to boot weblogic server. Please note I have
create two users, system and weblogic in my LDAP server.
I copied the stack trace below. Any suggestions will be greatly appreciated.
Weiguo
C:\prog\bea\user_projects\portalDemoDomain>"C:\prog\bea\jdk131_03\bin\java" -hotspot
-Xms128m -Xmx128m -XX:MaxPermSize=128m -Dcommerce.properties="C:\prog\bea\weblogic700\portal\weblogiccommerce.properties"
-Dweblogic.Name=portalDemoServer
-Dbea.home="C:\prog\bea" -Dweblogic.management.username= -Dweblogic.management.p
assword= -Dweblogic.ProductionModeEnabled=true -Dweblogic.management.discover=fa
lse -Djava.security.policy=="C:\prog\bea\weblogic700\server\lib\weblogic.policy"
weblogic.Server
<Nov 4, 2002 1:18:45 PM EST> <Info> <Security> <090065> <Getting boot identity
from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
Starting WebLogic Server...
<Nov 4, 2002 1:19:06 PM EST> <Notice> <Management> <140005> <Loading configuration
C:\prog\bea\user_projects\portalDemoDomain\.\config.xml>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090093> <No configuration data
was found on server portalDemoServer for realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Critical> <WebLogicServer> <000364> <Server failed
during initialization. Exception:java.lang.SecurityException: Authentication for
user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied at
weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
>
<Nov 4, 2002 1:19:21 PM EST> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)

Thanks a lot Scott. I followed your instructions and got it working to a certain
degree. I am pretty happy about the results.
There are still a few issues:
1. I had to create groups and users in my directory server in order to boot up
and logon to the server. This is expected, but is it possible to export these
user/group settings from the embedded LDAP server so that I can import them into
my directory server? Currently, the only way is manual and it's error prone. A
lot of trial and error has to happen to get there.
2. It seems that using Netscape LDAP server only allows read-only access. This
means we have to create new users/groups outside of the portal server and one
other side effect is self-registration is impossible, unless we use custom security
providers. Is this assessment correct? Since LDAP integration is so important,
wouldn't it be nice if BEA have that built-in and all we need to do is to switch
to and configure it?
3. I got duplicate users and groups in compatibility security. Obviously, one
set is from my LDAP server and the other is from the embedded one. I tried to
remove to embedded LDAP authenticator, but the duplicates are still there. How
can I get rid of the duplicates - I only want the ones from my LDAP server?
Thanks again Scott.
Weiguo
Scott Dunbar <[email protected]> wrote:
Weiguo,
WLP 7.0 uses a compatibility realm only and will not work with the
custom realm that you created for the Netscape directory server.
Configuring an LDAP compatibility realm isn't too bad and its
configuration is much like 4.0. However, it can be hard to configure
initially from the console. One way is to shut your server down and
modify config.xml directly - but make sure you make a backup copy first!
Then add something like:
<CachingRealm BasicRealm="myRealm" CacheCaseSensitive="true"
Name="wlcsCachingRealm"/>
<CustomRealm
ConfigurationData="user.filter=(&(uid=%u)(objectclass=person));
user.dn=ou=people,dc=beasys,dc=com;
server.principal=uid=dirmanager,ou=people,dc=beasys,dc=com;
membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquenames));
group.filter=(&(cn=%g)(objectclass=groupofuniquenames));
server.host=somehost.beasys.com;
group.dn=ou=groups,dc=beasys,dc=com"
Name="myRealm" Password="your_password_here"
RealmClassName="weblogic.security.ldaprealmv2.LDAPRealm"/>
will enable your LDAP server. After this is setup it will be much
easier to configure via the console. Obviously you'll need to update
the parameters above for your configuration.
Weiguo Wang wrote:
Hi,
I am trying to integrate Netscape LDAP server (6.0) with portal server7, but
having lots of trouble doing that.
I've followed the instructions in the developer guide and completedthe following
steps:
1. added a CustomRealm named defaultLDAPRealmForNetscapeDirectoryServerin config.xml
and modified the entries to fit my environment.
2. Deployed ldapprofile.jar and customized the env variables.
After these two steps, nothing happened. Then I did the third step:
3. added a iPlanet Authenticator to the realm CompatibilityRealm, whichis my
default realm for the server.
However, after step 3, I wasn't able to boot weblogic server. Pleasenote I have
create two users, system and weblogic in my LDAP server.
I copied the stack trace below. Any suggestions will be greatly appreciated.
Weiguo
C:\prog\bea\user_projects\portalDemoDomain>"C:\prog\bea\jdk131_03\bin\java"-hotspot
-Xms128m -Xmx128m -XX:MaxPermSize=128m -Dcommerce.properties="C:\prog\bea\weblogic700\portal\weblogiccommerce.properties"
-Dweblogic.Name=portalDemoServer
-Dbea.home="C:\prog\bea" -Dweblogic.management.username= -Dweblogic.management.p
assword= -Dweblogic.ProductionModeEnabled=true -Dweblogic.management.discover=fa
lse -Djava.security.policy=="C:\prog\bea\weblogic700\server\lib\weblogic.policy"
weblogic.Server
<Nov 4, 2002 1:18:45 PM EST> <Info> <Security> <090065> <Getting bootidentity
from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
Starting WebLogic Server...
<Nov 4, 2002 1:19:06 PM EST> <Notice> <Management> <140005> <Loadingconfiguration
C:\prog\bea\user_projects\portalDemoDomain\.\config.xml>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090093> <No configurationdata
was found on server portalDemoServer for realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Notice> <Security> <090082> <Securityinitializing
using realm CompatibilityRealm.>
<Nov 4, 2002 1:19:21 PM EST> <Critical> <WebLogicServer> <000364> <Serverfailed
during initialization. Exception:java.lang.SecurityException: Authenticationfor
user weblogic denied
java.lang.SecurityException: Authentication for user weblogic deniedat
weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
<Nov 4, 2002 1:19:21 PM EST> <Emergency> <WebLogicServer> <000342><Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogicdenied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogicdenied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1166)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
scott dunbar bea systems,
inc.
[email protected] boulder, co
303 998 2125 usa

Study material - IDOC and ALE systems ( MM integration ).

Dear All,
Can anyone provide me study material on MM integration with IDOC and ALE systems .
Rohan .

Please check these answered links:
ALE , EDI and IDOC with MM??
What is necessary for MM in IDOC and ALE??
idoc configuration in IDES??
Edited by: Afshad Irani on Jul 6, 2010 9:39 AM

Json rpc and json rpc cpp integration

Similar Messages

Maybe you are looking for