JSP Newbie need help

Hi to all,
I'm very new in using JSP, I was debugging an existing JSP codes when I encounter this problem. There's this two files these are as follows:
resourcecenter_requestinfo.html / resourcecenter_requestinfo.jsp
contact_requestinfo.html / contact_requestinfo.jsp
From what I have observe there's a confilict on the _requestinfo subtitle part of the filename because when I try to execute this code the template for contact and resourcecenter overlapped. What I mean by overlapped is both output of those template appears after execution.
I hope someone could help me on this or give me some tips.
Thansk in advance....!
Regards,
John Drayton C. Fule
Jr. Systems Engineer
Imperium Techonology Inc.
Philiipines

ok thanks I double check it and try to rename it and it works. But another problem occurs. The looks of the output it not what I expected. some colors turned to red. Is there any way i can determine why it happen.

Similar Messages

  • MacBook - Newbie: Need help on printing wirelessly to XP shared printer

    MacBook - Newbie: Need help on printing to XP shared printer
    Bear with me please. I read tons of articles on this but somehow as a newbie to MAC (girlfriends sick daughter), I am missing something. 10.5.2
    Currently, she can print directly if we plug in the HP Deskjet printer directly via USB to the MACBook. No problem.
    When we first got the MACBOOK I tried setting up the MACBOOK wirelessly to recognize the workgroup where the printer was attached via USB to the Windows XP PC. However it printed out garbage since I did not know there was a difference between XP printing and MAC (Gutenberg/gimp printing/drivers).
    Now I know there is a difference.
    But in reading various instructions, I no longer can find how to connect the MAC to the Windows workgroup. Note we do have a printer set up currently as USB-HP Deskjet on the Macbook (not sure I need to delete it yet).
    I went to System Preferences on MACBOOK and clicked on printers, more printers. In the drop down box was CANON, APPLETALK, IP HP printing and Firewire. There was no WINDOWS selection as I saw in other online web instructions.
    So not sure how to proceed to find a way to:
    1. Connect to Windows workgroup (click on what exactly), step by step please!!
    2. Add correct HP Deskjet 5490 printer (perhaps there is one with Gutenberg or perhaps I need Gutenprint-really not sure what I am talking about)
    Thanks so much in advance. Fiancé's kid has had her cancer recur in a different place and someone was nice enough to buy her a MACBOOK as a gift.
    Sincerely
    Peter

    ccarbery wrote:
    OK...I figured it out...no need to reply.  I noticed that there was another Protocol to use to set up the printer on the Mac, I was using LPD, so I switched it to HP Jet Direct-socket, and it prints fine...thanks.  I am curious as to why LPD wouldn't work; if anyone has that answer I would like to know...thanks
    Any chance of posting the Protocol you used to connect to your printer with your laptop?  I'm have the exact same problem printing from my MB.  Same error message "..is busy".

  • Precompiled JSP. Need HELP

    I need to know how to pecompile jsp, and where to put the result?
    Do I need any jsp blank plug?
    Where to put classes generated from jsp?
    Could you point me to some simple tutorial about it

    hi all
    im new to java technlogy ,i retrived data from
    oracle database inside a html table ,but i want this
    data to be as links to another pages .for example .
    i have
    a
    b
    c
    rived from database in a table .now i want this as
    links ,which on click should navigate to another
    page.
    how should i do with jsp/java please help me
    with sample code
    hank uInstead of making the HTML look like:
        <td>a</td>
        <td>b</td>
        <td>c</td>Make it look like
        <td><a href="linkfora">a</a></td>
        <td><a href="linkforb">b</a></td>
        <td><a href="linkforc">c</a></td>

  • Newbie needs help with Flex app

    Hi there. I am very new to Flex and also fairly new to
    programming although I do have a little experience.
    I am trying to create an app which stores code snippets or
    common text I tend to use every day in my documents and emails.
    So basically I need help on a design level. I can refer to
    the developer's manual for exact instructions for commands, but I
    need to know what to code first.
    The app will consist of:
    -a tree directory structure where I can create groups.
    -There will be a basic text editor where I input all my data,
    basic text formatting options (font, bullets etc) would be a bonus.
    -A search function
    -Finally it will ideally allow multiple client apps write to
    a central database file over a network
    Can anyone suggest how I should approach such a project?
    Or are there any tutorials / source files which demonstrate
    each bullet point?
    thanks.

    Hey jono,
    I'm new too. But I think I might know the right components.
    If you google any of these + flex 3 you should get some
    decent documentation
    tree - advanced dataGrid component
    basic text editor - rich text editor component
    search function - well, you're gonna need to read up on
    arrays, and arraycollection. Once you get that stuff working, you
    can write up a function to search for a string in an array.
    network functionality - HTTPService, you can dump the
    datagrid into a database, and have it load the database when you
    open up the application.
    Give these things a shot, tutorials / sources will come with
    the google searches.

  • Newbie needs help comprehending CSS Password Manager functions

    Hello All:
    I own a TP W500 4062-27U running Windows 7 Ultimate.  The computer is trouble-free.
    I am seeking a solution to the following need:  An application that will securely remember my passwords for various websites, etc. and enable me to log in using the fingerprint reader or similar.
    I am aware that Lenovo provides both Fingerprint Reader software and Client Security Solution software, but I don't know whether or not either one (or both) of these applications will provide the functionality I am seeking.  I have spent a fair bit of time looking around the Lenovo website, but cannot find a document that describes (in a general, overview manner) the functionality that CSS provides.
    I don't need to log into VPNs, or company networks, or anything really fancy like that - I just need something that will enable me to log into about 20 different websites, using a different password for each website.  Right now, I'm generally using the same password for every website (that way, I can remember what it is), and as I think you will agree, that is probably not a very good practice so far as security is concerned.
    If anyone could point me towards a document that explains how I can get CSS to do what I want it to do, I would be very grateful.  If CSS does not have the functionality I am seeking, I would very much appreciate a recommendation of software - possibly non-Lenovo - that does provide the functionality I am seeking.
    Thanks very much for your assistance.
    Michael

    Hi PanEuropean2,
    Welcome to Lenovo Forum!
    In regard to your question, Client Security Solution (CSS) should be the right fit for you.
    I have a T410 with Win 7, and have several passwords to remember which is really killing me. However, by using CSS, Fingerprint software and Password Manager, I need to enter all the passwords only once when access a website or a tool, and let it saved in CSS.
    The next time i turn on the machine and open up a website which needs user ID and password, I just need to swipe the fingerprint that I've enrolled, then viola!
    Just take note that after the first swipe of fingerprint, tools or website that are to be accessed later will automatically show the password in the box directly without having to swipe fingerprint again. You just need to click to log in. I"m not sure if this is the experience you're looking for, however, no harm to give it a try.
    Here's the user guide for CSS. It has
    Client Security Solution components
    Client Security Solution installation considerations
    Client Security Solution features
    Hope this helps
    Cheers,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • DVD Studio Pro Newbie Needs Help!

    I have a presentation deadline approaching and I need help desperately. I created my presentation using Keynote 3 (800*600 slides) and exported it to a Quicktime movie using H.264 compression at 29.97 fps (high quality settings). I then proceeded to use iDVD 6 and imported the Quicktime movie and created a simple menu using the templates provided.
    I saved the entire project as a disk image and used the DVD player to check the disk image file. The quality of the DVD disk image file looked nothing like the original Quicktime movie. The images and text looked blurry and unprofessional.
    I've spend quite some time on the iDVD and Keynote discussion forums and can't find a solution to my problem. The conclusion I've come is that the mpeg-2 encoder that iDVD 6 uses is problematic.
    I don't want to start using DVD Studio Pro but I will in order to preserve the quality of my original Keynote presentation. So here are my questions...thank you in advance for your help guys....I really need it:
    - I plan on playing the DVD on a 42" Plasma display at a sales office and also distributing it to potential buyers. Are my Keynote export settings optimal for iDVD use? Should I be using H.264 @ 29.97?
    - If I must use DVDSP then what export/compression settings should I use in Keynote to preserve the quality? Keynote doesn't give me an option to use mpeg-2. I have ffmpegX so I can encode different formats...just need to know the correct one.
    - Keynote exports separate audio and video files. I combined them using Quicktime. Is it possible to use the combined file in DVDSP or do they need to be separate.
    Thanks for taking the time to read this post. Any help would be greatly appreciated. Also, if you have any reading material pertaining to this matter please provide link.
    ~Eddie~
    PowerBook G4   Mac OS X (10.4.5)  

    You can use a mov file that contains both audio and video. DVD Studio Pro will compress the mov itself. I am not overly familiar with the codec H.264 but either way its a codec that compresses the video, and if I am right that codec is used for compressing video to web based file sizes, which means heavy compression. When I create DVD material I use M2V format which is what DVD SP wants anyways so it cuts time and drive space in half. If you export an mov and import it into DVD SP, DVD SP compresses the file again which is M2V. Now you have two files, with twice the compression time. When creating M2V the only thing that you need o be aware of is the bit rate, which needs to be adjusted pending the duration of the video. Use 29.97 if you are NTSC and full frame rate, which you should be.
    If you can not create an M2V file with associated aiff audio file, than export your QT file as uncompressed or as a QT Movie. The file itself will be huge but DVD SP will compress it properly.
    I hope this helps

  • Newbie needs help with browser compatibility

    Ok, so I'm new at this, so this may be something really
    simple, but browser compatibility? I made a site in DW;html and it
    shows up perfect in safari but internet explorer and firefox not so
    much. I did a browser compatibility test in DW and it says nothing
    is wrong with my pages, but obviously something must be!!
    On my home page, the image of a house that I have next to the
    company name shows up fine in safari but not any other browsers.
    And my page layout, everything is moved over funny in other
    browsers. Also there are link boxes around the table I created with
    different brands of products. On safari the boxes do not show, but
    all the other browsers it does!! I'm new at this and frustrated!!!
    Need help!!
    The link is holmeshifi.com and I posted code from the home
    page!

    OK thanks Ned sorry to soo dumb I'm on a learning curve here!  what 
    I'm trying to do is go to the URLs of web galleries of images from my 
    main site
    so I would presumably have to rename them on my server? i.e. does that 
    mean adding the code ", "_blank");
    to the files on the server?
    At the moment I have to use the back button on my browser window which
    takes me back to the main site which then has to reload (tediously!)

  • Newbie Needs Help - Moving to CD

    I'm running winXP and have downloaded the latest CS 5.5 version of Dreamweaver - I've created a small series of interlinking web pages with the 'main site' being a folder on my Desktop called Testsite.  As far as I'm aware all the relevant pages/documets/images are contaned within my Desktop folder and everything runs from index.html which sits within my testsite folder.   Ultimately, I would like to be able put a CD in a drive and automatically launch a browser that would open my home page (i.e. index.html).  I need help on all this but I will googe for the auto launch bit - at the moment I would appreciate any advice on burnng my site to a CD.  Because I have created the site on my PC I'm assuming all my dreamweaver internals/links are in the form C:\Documents and Settings\username\Desktop\Testsite - so I'm guessing if I just copy my Desktop Testsite folder to a CD and run index.html on another PC my little web site is not going to work.  I have googled but keep getting pages about running the actual Dreamweaver applicaton from a CD and installing it on a PC - not the way I want to do it.  I'm not interested in moving Dreamweaver to a CD - just the site/pages I have created.  Any advice apprecited.

    All long as all of your files are linked with relative links (eg: /path/to/file.jpg and not http://www.domain.com/path/to/file.jpg) you should be fine.  Auto-starting can be an issue because there are some operating systems that don't auto start discs.  So you should maybe include instructions with your disc in case the autorun does not work.

  • Storm user newbie needs help with appcenter

    hi everyone. i need help regarding my blackbeery storm 9500. i bought from a friend but he only gave the charger and the the phone. there is no app center. is there anyway i could get the appcenter so that i can get the bbmessenger?

    You can download BBMessenger from your Blackberry browser at www.blackberry.com/bbm
    AppWorld: www.blackberry.com/appword
    You must have the BlackBerry Data Plan on your device to use either of those services.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Newbie need help on JSP! Thank you

    I am trying to sent data from a html file to a jsp file by using request,
    although it load jsp page successfully, variables are empty.( I assure
    that the variable names match), here is the code
    <html>
    <body>
    <h1>Please tell me about yourself</h1>
    <form action="SimpleFormHandler.jsp" method="get">
    Name:    <input type="text" name="firstName">
        <input type="text" name="lastName"><br>
    Sex:
        <input type="radio" checked name="sex" value="male">Male
        <input type="radio" name="sex" value="female">Female
    <P>
    What Java primitive type best describes your personality:
    <select name="javaType">
        <option value="boolean">boolean</option>
        <option value="byte">byte</option>
        <option value="char" selected>char</option>
        <option value="double">double</option>
        <option value="float">float</option>
        <option value="int">int</option>
        <option value="long">long</option>
    </select>
    <br>
    <input type="submit">
    </form>
    </body>
    </html>
    <html>
    <body>
    <%
    // Grab the variables from the form
        String firstName = request.getParameter("firstName");
        String lastName = request.getParameter("lastName");
        String sex = request.getParameter("sex");
        String javaType = request.getParameter("javaType");
    %>
    <%-- Print out the variables --%>
    <h1>Hello, <%=firstName%> <%=lastName%>!</h1>
    I see that you are <%=sex%>. You know, you remind me of a
    <%=javaType%> variable I once knew.
    </body>
    </html>

    This works- just ensure that the latest jsp is being picked up by the server. (A restart and a new IE would ensure that)
    <html>
    <body>
    <h1>Please tell me about yourself</h1>
    <form action="test3.jsp" method="get">
    Name:    <input type="text" name="firstName">
        <input type="text" name="lastName"><br>
    Sex:
        <input type="radio" checked name="sex" value="male">Male
        <input type="radio" name="sex" value="female">Female
    <P>
    What Java primitive type best describes your personality:
    <select name="javaType">
        <option value="boolean">boolean</option>
        <option value="byte">byte</option>
        <option value="char" selected>char</option>
        <option value="double">double</option>
        <option value="float">float</option>
        <option value="int">int</option>
        <option value="long">long</option>
    </select>
    <br>
    <input type="submit">
    </form>
    </body>
    </html>
    <html>
    <body>
    <%
    // Grab the variables from the form
        String firstName = request.getParameter("firstName");
        String lastName = request.getParameter("lastName");
        String sex = request.getParameter("sex");
        String javaType = request.getParameter("javaType");
        if(firstName != null && lastName != null && sex != null && javaType !=null){
    %>
               <%-- Print out the variables --%>
               <h1>Hello, <%=firstName%> <%=lastName%>!</h1>
               I see that you are <%=sex%>. You know, you remind me of a
                <%=javaType%> variable I once knew.
      <%}%>
    </body>
    </html>ram.

  • Flash CS5 Newbie - Need help adding URL link to animated banner

    I apologize if this is a very basic question, but I am a newbie at designing in Flash. I have created a basic animation in Flash CS5 and I need to add a clickable URL link to it. I've tried a few tutorials that looked promising, but none of them solved my problem. I've tried a number of things including converting parts or all of the images to simple buttons or movies and linking them that way as well as typing in code for ActionScript 2 and 3, none of which were successful. The animation plays correctly when viewed in my browser, but when I click on it, the link does not work. I would prefer that the entire banner be clickable to take viewers to the linked website rather than using hyperlinked text. Also, when I open the Code Snippets window, it is empty, no matter what image or frame I've selected. Do I need to import code snippets from somewhere or am I simply going about things the wrong way? Any help is greatly appreciated!

    It all depends whether you're decisively using AS2.0 or AS3.0 .
    In the latter, you would need to use a URLRequest() method in conjunction with a navigateToUrl() call (not sure the exact syntax for navigate to Url, it might be a capitalized "URL" in the method but the request takes a String argument such as http://www.adobe.com)

  • Flash newbie needs help

    i'm quite a newbie when it comes to flash and need some help
    http://www.sas.se/sv/?vst=true
    you look to the right you'll see an airplane and i'll say "Billiga avgångar" next too it
    under the text you can see text in yellow being scrambled then reappear
    i was wondering how you make the text scramble then display the messeage like that?

    this is a better way to do it in one textfield.  it's easily amended to display one letter per textfield and add textfields as needed.
    (to speed up the display shorten charS even down to a one character string.)
    var charS:String = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 01232456789,./<>?;':\"[]{}\|!@#$%^&*()-_=+";
    var charA:Array = charS.split("");
    var displayTO:Number
    // user defined params:
    // character change in ms
    var speed:Number = 1;
    encodeF(yourstring,yourtextfield);
    function encodeF(s:String,tf:TextField){
        tf.text = charA[0];
        displayTO = setTimeout(displayF,speed,s,tf,0,0);
    function displayF(s:String,tf:TextField,charNum:Number,index:Number){
        tf.text = tf.text.substr(0,-1)+charA[index];
        if(s.charAt(charNum)==charA[index]){
            tf.text += charA[index];
            charNum++;
            index=0;
            if(charNum<s.length){
                displayTO = setTimeout(displayF,speed,s,tf,charNum,index);
            } else {
                tf.text = tf.text.substr(0,-1);
        } else {
            index++;
            if(index<charA.length){
                displayTO = setTimeout(displayF,speed,s,tf,charNum,index);
            } else {
                charA.push(s.charAt(charNum));
                displayTO = setTimeout(displayF,speed,s,tf,charNum,index);

  • Any Updates Made to the T540 ready to ship? Newbie Needs Help.

    Total newbie with Lenovo.  Lenovo is offering the T540p ready to ship for  about $650.  Is this the same track pad that got all the negative reviews or have any improvements been made?  I'm new to the forum and not a power user.  I maintain a website for a herding dog rescue and edit and move pictures and or video around a couple times a week.  If I use a mouse will this computer work for this?  

    Hi Venkat,
    I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
    Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
    If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
    Does that help?
    Regards
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • Newb needs help opening file browser and getting full file name and path.

    Ok, so I'm a TOTAL newb here, but I have managed to get it to open a file browser but all I can seem to get it to do is give me the NAME of the selected file *eg. selectedFile.name* I also need the path of the file as in C:\example\file.mp3.
    The program I'm making plays an MP3 of your choice at a certain time, like an alarm clock. But I got tired of entering the file path of the MP3 EACH time so I wanted to have a browse feature.
    Ideas... help... thanks...
    Nicholas

    you'll need to use air to get the path.

  • Newbie need help with Web BEx setup!

    Out of curiosity, I decided to install Netweaver so I can have a play with it. I am a complete newbie to Netweaver therefore I apologise if this is out of context...
    Here's my question:
    How do one go about getting Web BEx to work?
    Whenever I activate the link in the portal, I get an error about unknown "SWITCH_AXES" command and 0ANALYSIS type 4 error. I search the forum and the few passing mentions of the problem points to OSS notes that is only accessible through service marketplace (which I don't have an ID). I have check the object types in BI content and seems that 0ANALYSIS is already activated. There must be something I am missing. Tried blindly and randomly installed other BI content (mostly Web templates and objects) but to no avail (and encounted a few short dumps).
    Any help is greatly appreciated!
    So far, here're what I did:
    1) Install Netweaver 2004S ABAP and Java on the same machine. Instance 00, 01 and 02 respectively.
    2) Try to run BI-Java template installer, but met with error part way. So some of the steps are done manually.
    3) Set up SLD (both instance are in the landscape), and 'partially' set up SSO. Partially as while JAVA to ABAP seems to work, ABAP to JAVA is not working. Anoying but livable.
    4) Installed TREX (instance 03) and are seen by ABAP and JAVA.
    5) ABAP is seen in the portal and I can create transactional iviews and put them in the Portal (with working SSO).
    6) Did reverse-proxying with Apache, but I don't think it matters as it seems to be a backend module issue.
    7) Business planning/wizard is working (in ABAP and Portal) as is Broadcast. As you can see, Web BEx is the only thing that is not working

    The default link for Web Analyser in EP 7 seems to point to the new template. When opening the analysis template in the new BEx windows tool, the same error is being reported. Using 3.5.x WAD, I can't locate the template.
    More on this issue Although for that case, the meta data is not installed. Is there a way to trace missing component and reinstall the needed BI content in RSA1?
    BTW, these are on JAVA SP9 and ABAP SP11.

Maybe you are looking for