JSP Not Working with Thin Driver

My JSP is not working with Oracle thin driver but it is working with Oracle OCI driver.
From my jsp i am calling a stored procedured and passing 170 parameters to the procedure. This JSP works with Oracle OCI Driver configured as thrid party drivers in iAS6.0 SP2, but not working with Oracle Thin Driver configured as third party drivers in iAS6.0. My thin driver JDBC Connection URL is as follows:
jdbc:oracle:thin:@(DESCRIPTION =(ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST = MAPDBI01)(PORT = 1521)))(CONNECT_DATA =(SID = MAPS))).
I have to give this URL because my production server deployment consists of iWS4.1 SP5 and iAS6.0 SP2 in different solaris boxes and Oracle 8.1.7 Database server in another Solaris Box. There is a pool of proxy servers between iAS6.0 box and the oracle box.

Wim,
I'd really appreciate it if you could provide some sample code. A complete, small, simple java class that I could copy and try out would be wonderful -- if it's not too much trouble.
Thanks heaps (in advance :-),
Avi.

Similar Messages

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

HD Led not working with SATA drives on MSI K7N2 Delta

I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
I had Bios v7.3 and flashed to v7.4 with no luck.
Could a new bios update fix this problem?
Anybody seen this before?

basically it not wired up so works for no one

G505s - Touchpad hot key function not working with lenovo driver

I'm using windows 8.1, Lenovo G505s laptop. Recently I got replacement from Lenovo regarding touchpad after that this Fn(F7) touchpad enable/disable not working. This is happening only when I installied touchpad driver provided by lenovo and works well with standard microsoft driver (Ofcourse, no multigesture support with that driver).
We perfomed following operations:
1. HotKey mode enable/disable in BIOS
2.Reinstallation of OS
3. Reinstallation of driver(manually)
All cases with microsoft driver this function working but with touchpad driver it is not working. It's almost 90days (88thday) daily contacting both Lenovo customer support and service center people but no use.
If anybody having this problem and have a solution please share! (My machine under warranty!)

hi phani_kumar,
It's likely that you have a Synaptics driver (you can verify this by its hardware ID or use a utility software like AIDA 64 Extreme Edition).
- Link to picture (Synaptics)
- Link to picture (ELAN
If you're unable to install the driver below, can you follow this guide on how to disable driver signature enforcement then try to reinstall the driver again and observe if you can now toggle the Fn+F6.
Windows 8/7/XP/Vista 64/32-bit Edition v17.0.19
All Languages
118.1 MB zip
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Spotlight not working with External Drive (Wireless)

I have setup the new Airport Extreme (AE) and connected WD 500GB via USB to the (AE). Spotlight does not recognize the external drive when it is connected to the AE. It will of course work if I directly attach external drive to my Macbook Pro. Any ideas on how to get Spotlight to "see" and index this external drive. Thanks.

I was able to get my Airport disk working using the following Terminal command:
sudo mdutil -i on /Volumes/Maxtor\ HD
Replace Maxtor HD with the name of your HD. (The slash indicates a non-breaking space.)
It took awhile and then it started indexing.
J

Spdif out not working with latest drives on XFI

/? I installed the newest drivers that were released recently. Driver version 6.0..347.
Before I upgraded to these drivers my dolby digital was working fine.
In powerdvd I have SPDIF/out selected. And the dolby digital light will not come on in the reciever. Anyone?
else having this issue?
SYSTEM SPECS: Antec P83 * Antec CP-850 * Intake two S-Flex SFF2E fans *
Exhaust? two S-Flex SFF2E fan * Noctua NH-U2P SE366 cpu cooler * Asus P6T Deluxe *
Bios version 605 * Core i7 920 @ 3.6ghz 20x 80bus * Mushkin 3x2GB 998679 @ 7-8-7-20 *
Gigabyte 9800 GTX+ gig * PCIe SB X-Fi Titanium Fatality Pro * Pioneer SATA DVR-22DBK *
Intel X25-M 60GB MLC SSD * Two Western Digital WD6400AAKS 640GB *
?Windows Vista 64 Ultimate SP2 not vlited
Message Edited by galvin on 08-6-2009 05:08 [email protected]

No one has this problem at all?
I want to find out for sure if there is a fix before going back to the older drivers.
If i do the test in the spdif out properties panel -> supported formats. When I do the dolby digital test I see the light come on in my receiver and hear sound just thru the front speakers. But when I use power DVD 9 ultra with the latest patch. I don't get the digital light on my receiver. I had this working with the previous drivers released earlier this year.
Message Edited by galvin on 08-7-2009 0:54 [email protected]

KT8 Neo.......Led Activity does not work with SATA drives

Is this another MSI Flop.
Does anybody know if the HD led works when using SATA drives connected to the Via controller on the K8T Neo board?
I checked the case led and it works fine. It is not burnt out.
I also have the K7N2 Delta board and the HD led does not work on that board either when using SATA hard drives. I was told the led connecter was never wired to detect activity for the SATA drives only for IDE. A bios upgrade would never fix it.
I just setup K8T Neo and other than the HD Led not working the board seems to be pretty stable.

The only led activity I get is when the board is first powered on and I just recently noticed when I play a DVD. The led seems to flicker when the dvd is playing.
Other than that I see no led activity with 1 or 2 SATA drives connected to the VIA controller.
Can someone confirm that it either works or it doesn't work.
I keep reading all these posts and some say it works and some say it don't.
Unless their is a new revision of the KT8 Neo and everybody is connecting their led to the HDD Led pins on JFP1 (Page 2-19 in the manual) they all should either work or they all should not workl. From what I gather their is no new revision of the board and only one Bios v1.1.
It also seems their was some confusion on what connector people were connecting thier led to on the motherboard. From what I read on page 2-19 in the manual thier is only one choice on JFP1 (Top row, pins 1 & 3).

Scanning Documents From File Center from HP Officejet Pro 6830 Not Working with Twain Driver

I just purchased a HP Officejet Pro 6830 All-In-One printer and planned to use it to scan from Filecenter (Lucion Technologies) using TWAIN driver. The Twain driver for the HP shows up in Filecenter, but the scan produces a blank document. My previous All-In-One printer from Dell (Lexmark) scanned to this software with no issues. Are there any solutions to this issue? Filecenter has different scan modes A and B and Transfer type (Native, Memory and File) and I tried all 6 options and none worked.

Hi @cyclebob ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Will iTunes 10.4 upgrade (Lion 64 bit ver) Not Work With External Drives Any More?

Since i upgraded my MacBook Pro to Lion today, itunes just cannot play anything without going in to to meltdown. Even short tracks stop and stutter, and movies and TV programs are a no go.
All I get is the dreaded spinning beach ball.
My library is stored on a Firewire 800 external drive as my collection would take up more than my MacBook can hold, but running from an external drive has never been a problem before.
I know the library on the external drives okay, because I was streaming stuff over Airplay to my Apple TV2 half an hour before i did the upgrade, and it was working perfectly.
Does anyone have any idea what this might be or causing it, or how I can rectify it please?
Thank you

Oh yes, I did that several times.
Actually, I think i have found the answer. I think what was happening was that since this was a new iTunes version (and perhaps its moving from 32-bit to 64-bit type program) that it had to re-index it or catalogue it, or something in that vein anyway. I left iTunes open for a couple of hours and the external disk still attached and it now appears to have settled down, and i can report that its now working just fine.
Phew!
Thanks for your suggestion anyway.

ITunes 10 not working with external drive

I am using iTunes 10 on my MacBook Pro..I wanted to move my library to an external drive due to its large size. I correctly created the folder in Advanced Preferences and "consolidated" my library. However, iTunes despite having the correct drive destination is stil looking at/for the old library. Any advice would be greatly appreciated.

Did you move the entire iTunes folder or did you just move your media?
If you moved the entire iTunes folder, the you need to hold down
the option key when you start iTunes. I dialog box will come up
asking to create a new library or to choose a library. Select the chose
option, then select the location on the external drive where the iTunes Library
file is located.
If all you did was move the media, then you need to change the path to
the media in the advanced preferences.

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

My wifi driver is not working with windows 8.1 in my MBA2013?

My wifi driver is not working with windows 8.1 in my MBA2013?
i installed windows 8.1 with bootcamp, everythigs seems to be working fine except the wifi,
please help me to solve this problem,,
thanks

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

External DVD drive not working with Lombard G3 333

I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
Also, would it be difficult to add a DVD logic board to my Lombard?
Joey

xamdu,
I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
http://patchburn.de/download.html
If the above is unsuccessful, take a look at this workaround:
http://www.macosxhints.com/article.php?story=20040330171655882
You can swap logic boards but it does require a lot of disassembly.
Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

JSP Not Working with Thin Driver

Similar Messages

Maybe you are looking for