Jsp text report

Hi,help me a sample code for report in text format from jsp with line alignment

Your question is....nonsense...
Please re-structure your question, give us more details and ASK...
X--spYro--X

Similar Messages

  • Receiving an error in Print Report.vi in the Text Report Example.vi

    I am trying to run the "Text Report Example.vi" example under Windows XP Professional, MS Office 2003 and LV 6.1 and I get an error in the "Print Report.vi" saying that there is an unknown error (-2147452567). I have searched through the Knowledgebase and found a couple of things to try but none of them worked (namely this solution). Is there a known problem with Office 2003 and LabVIEW 6.1? I can run the same example on another computer that is running the same setup except that it has MS Office 2002 SP3 and it prints properly.

    There are several reasons why you could get this error. There was a problem with a DLL change that caused either an invoke node or a property node (sorry, I don't remember which) to need to be replaced or relinked. I think that this is the problem that you linked to.
    The other potential problem is that you could be calling a font that you have on one of the computers but not on the other.
    I hope that this helps,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Error While Opening JSP in Report Builder converted from RDF

    Hi,
    I am using Oracle reports 9i to convert rdf into jsp and invoke this jsp using OC4J to get HTML report.
    The problem i am facing is that while converting RDF to JSP conversion went on successfull but when iam trying to open the JSP in Report builder it gives me error REP-2: Unable to retrieve string from message file.
    When i want to see the paper layout it is not present and datamodel is also corrupted. In the data model sources for some fileds become null and one addtional group is appearing with no column in it.
    Urgent help is needed.
    For any help Thanks in advance.
    Regards
    Sanjay Tripathi

    Hello Sanjay,
    There are some known issues in Reports 9i due to which XML/JSP reports do not open correctly in Builder, and throw the REP-0002 error. These bugs are currently being looked into, and will be addressed soon.
    1. If your report is using ref cursor queries, and you are hitting the above error, please ensure you connect to a database before you open the report.
    2. If your report has summary/formula columns, please try to create the JSP report without these columns and then try to open it in Builder.
    Thanks,
    The Oracle Reports Team.

  • How can I add the number of columns/row starting with the build in "Text Report" example in the LabVIEW

    Hi All,
    I am wondering how can I add the numbers of row and column from the existing build-in "text report"
    VI ? If possible, would you mind showing me step-by-step because I am a new user and I am not familiar with the labview software.
    Thanks

    Hi,
    Easy text Report is for saving to a file. Do you mean you just want to add the totals of two arrays and write that? In that case I would just append the totals before writing to file.
    Jeff | LabVIEW Software Engineer

  • I can't append control image to report on 1 page with appended text report

    I am attempting to create a report which is simply header, experiment information, and two graphs of data. I am using a Easy Text Report and Append Control Image to Report. I have successfully printed out this report, but on two separate pages. The header info is on the first page, and the graphs on the second page. This doesn't seem to be a margins problem, as the header is very brief and the graphs aren't that large either. I would like to make this into a one page report.  Any help is greatly appreciated.
    Message Edited by csmrunman on 01-15-2010 10:18 AM

    Nevermind. I neglected to see the Append Report Text.vi. That solved everything.

  • Use dot matrix printers for printing text reports in Reports 10g

    In Forms 6i, customers had the option to use dot matrix printers for printing text reports.
    I believe, from 9i onwards, text based reports aren’t supported and instead HTML/PDF,DOC,RTF reports are supported which are not text based and use modern day printers.
    Is it still possible to use text printers ??
    Regards,
    Noman

    hi
    check out the following link.
    Re: Is printing to generic text printer and hand-coding the report possible?
    http://download.oracle.com/docs/html/B10314_01/pbr_uxprt.htm#1005700
    sarah

  • Easy text report in DLL causes LabVIEW crash

    I was wondering if anyone else could shed some light on this problem (it's got tech support stumped).
    To date I have two build machines and three target machines that have had the same problem. I build a DLL in LabVIEW that contains the Easy Text Report vi. I also create a VI that calls this DLL function to test it out. Everything works fine on my build machines. On my target machines, however...
    On the target machine I put a call library function node on the block diagram and configure it for the LabVIEW DLL I created, select the function and setup the parameters to the function. Upon clicking on OK on the configuration window for the call library function node, my hard drive access spikes for some period of time (sometimes fractions of seconds, sometimes seconds); I assume the VI inside the DLL is being loaded into memory. I then get a Windows message stating that LabVIEW needs to be shut down at which point Windows terminates LabVIEW. Removing the Easy Text Report from the DLL VI eliminates the crash. Tech support has helped narrow this down a bit -- it seems to specifically be the print portion of the report generation VIs (they sent me a DLL that creates an HTML report which had no issues).
    I'm doing this in LabVIEW 8.0. To make things more interesting, I have the same code in LabVIEW 7.0 and 7.1; neither of these have any problems. I've attached the code (LabVIEW 8.0) that tech support and I have been messing with.
    Any thoughts or sugestions?
    Tim Stahl
    Attachments:
    My DLL.zip ‏10 KB

    Hi DougF,
    It has been a while since I looked at this stuff in detail, so I will answer from memory.
    There are a number of routines that must be present for the code to work correctly. The two I am thinking about are "CINDispose" and "CINUnload".
    I suspect CINUnload is missing or buggy.
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Easy text Report.VI...not so easy

    I'm using LV 7.0 and when I try to use the 'Easy Text Report.VI' I get this: Error -2147319779 occurred at library not registered. in font styoe.vi->set report font.vi->easy text report.vi->untitled 1. This error code is undefined. No one has provided a description for this code, or you migh have wired a number that is not an erro code to the error code input.
    I would appreciate any help on this....tks

    I am not positive what is causing the issue, but here is a list of things that may fix it. I understand some look strange, but I promise I have seen them fix issues.
    1.Hit ctrl-shift-Run Arrow on the Top level VI to force a recompile of the hierarchy.
    2.Open up the subVI (really a sub-subVI) called Font Style.vi. On the block diagram, in the upper left-hand corner, there is a property node. Change the property node to a different property, and then back to the original "TextFont" property. Save the VI.
    3.Take a look at these links Error "-2147352573 Member not found in the xxx.vi" with NI Reports VIs in LabVIEW 6.0
    f/websearch/2FCAAF080951FCAB86256982007AA16C?OpenDocument�> NI Reports Doesn't Seem to Be Working Pr...
    4.Re-install LabVIEW
    Evan

  • Easy Text Report

    Hello,
    I try to print out a text with "Easy Text Report.vi".
    After the "Set Report Margins.vi" there is an error: Menmber not found!
    What´s wrong?
    Thanks, Philipp

    Hi Philipp,
    I had the same problem, try this:
    - In the Measurement System input of Set Report Margins vi connect a constant and set it to metric or US
    - In the report margin cluster try to change the default values ( I set 10mm)
    In my case this worked. This problem showed up only with LV6; LV5.1 worked fine.
    Good luck,
    Alberto

  • Executable and easy text report.vi

    After reading some of the knowledgebase articles and the discussion grps it sounds like I am missing somethng when I create an exe and include "Easy Text Report.vi" in my LV2012 Project.  If I run the exe in the admin window of Windows 7 the test results are printed out just fine.  If I copy a shortcut of the exe file over to a user window on the same machine nothing is printed.  Anyone know why????
    Windows 7
    LV2012
    Thanks...
    Solved!
    Go to Solution.

    Doing a quick search on the forums for that error gives a lot of information. I guess that error is what the print VI throws no matter what the problem is. You can try printing to pdf as the default printer and see if the error is still happening. Try changing the default printer to the one you are using. (Maybe the 2 logins have different printers selected as default). Someone who has experienced error -41002 might be able to explain more than I can... There is a knowledgebase that talks about issues with margins, but I don't know how much help that will be. -41002 KB A few other posts appear, but nothing that would explain the difference between administrator and users permissions.

  • Running JSP Excel report from Forms 10g

    Perhaps this had been discussed before, though I didn't find an exact solution.
    We have a JSP report that displays data in MS Excel. Works fine if called from the url.
    The report shall be called from the form passing a parameter list with PARAMFORM=NO.
    Problem: reports runs as designed but opens up an empty Excel spreadsheet. No errors, no data..
    We are using RUN_REPORT_OBJECT with desformat=spreadsheet and paramform=no.
    We can't use just web.show_document alone since quite a few parameters need to be passed.
    I've read in one of the posts that a paper layout need to be created (in addition to web layout) to run RUN_REPORT_OBJECT. We've done that, but now it does not open EXCEL, and displays paper layout in a browser.
    So, how to call JSP (Excel) report from Forms passing parameter list without displaying the parameter form?
    Thank you

    What is the complete Application Server version you are using? Be sure you are using 10.1.2.2
    What platform and version is it installed?
    What version of Excel is installed on the client?
    Does it work if you use an RDF report?
    Try this:
    o Change DESFORMAT to DELIMITED
    o Append the following to the end of the URL created in the WEB.SHOW call:
    &mimetype=application/vnd.ms-excel
    The result should be the same as using SPREADSHEET.

  • Xml code passing to a JSP text box ?

    Someone can tell me how to pass pure XML to a Jsp Text box with the text structured. I have the problem that the jsp page absorve the xml source code.
    Thanks

    Hi,
    You might see better results if you change:
    this.box_pname = "Enter User Details"; //set Page name
    To:
    this.box_pname.text = "Enter User Details"; //set Page name

  • How to deploy Reports which is saved as JSP in Reports 9i , in Tomcat serve

    Hi,
    I have saved rdf as JSP in Reports 9i and try to deploy in Tomcat server. Initially i got some error regarding taglib, RWException.class. But i put Oracle9IAS classes in /WEB_INF/CLASS folder so able to run JSP.
    I am Giving URL As
    http://localhost:8080/examples/jsp/IN_FREQUENT_DIALLEDNUMBER.jsp?server=HTP&userid=eulogy/eulogy@eulfenny&destype=cache&desformat=HTML&paramform=yes
    If i am not giving Server=HTP, then getting ERROR
    Reports Error Page
    Wed Feb 18 14:34:09 IST 2004
    javax.servlet.jsp.JspException: REP-51000: Reports Server name is not specified
    If I am giving Server=HTP
    Reports Error Page
    Wed Feb 18 14:35:15 IST 2004
    javax.servlet.jsp.JspException: com.sun.corba.se.internal.Interceptors.PIORB
    I have placed this class in /web-IF/Class folder, After all i am getting this error.
    But My requirment is to run the Jsp without giving Server=HTP
    Any One can suggest, It is possible to run this JSP in Tomcat without Using Reports Server(9IAS BC4J instance).
    Appreciate all your reply & Thanks In Advance.
    Regards
    Rajeev

    H,
    reports cannot be migrated at this time, indeed.

  • Standard Text Report creation

    I am trying to create text report from array of data (acquired online). I have a specific problem of setting Center header title with larger font as well as right header with smaller size font.  Herewith attached image file.  
    Any help would be appreciated.
    Kousy
    Attachments:
    Problem_Report_header.JPG ‏86 KB

    Hi,
    I am attaching doc file , when acquiring data online I want to print a report format like this. Can you please send out a simple vi elaborating that.
    I can change the font, style everything, to all Left/Center/Right Header text. But its not inserting Center Header with Larger font & next line right header with smaller size font. Because I have supplied larger font with Center Heading only. Then inserted a new line. Again I have supplied smaller font with right heading only (now the center/left header string are empty) that’s creating confusion i hope. if this is the reason, then need to find out work around to make it the way i want probably. Otherwise I may be wrong.
    Hope this clarification is ok.
    Kousy
    Attachments:
    Report.doc ‏22 KB

  • Remove "Begin Sequence" and other strings from text report

    I want to remove the string "Begin sequence", "End sequence" and the pathname of the sequence from my text reports that is generated with 'On The Fly Generation' option set, without this option those strings are not present.
    I see that strings are inserted by the 'ProcessOTFStepResult' sub-sequence in the report_txt.seq file, this is an activex call that compile the body of the report.
    Thank you in advance,
    Massimo Ponte.

    I suggest you take a look at the following documents to have a more clear view of what teststand offers when it comes to customizing Reports:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/F2F1EE9E7266F4A88625696C00688499
    http://digital.ni.com/public.nsf/websearch/05F43468942BE32E86256D980074E200?OpenDocument
    AlessioD

Maybe you are looking for