JSplitPane's divider bar click event

Hi all,
I have a JSplitPane like this
sp = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT, canvas, myPanel);
At runtime, when user CLICK on the divider bar (but doesn't drag), the canvas on the left panel is not repainted.
Would you please let me know how I can catch the event when user clicks on the divider bar. (When user drag, I may detect by method ancestorMoved in AncestorListener).
Thank you,
Fanta

I don't know if there is an easier way, but you can add your own MouseListener to the splitpane divider like so:
    JSplitPane split = new JSplitPane();
    BasicSplitPaneUI paneUi = (BasicSplitPaneUI)split.getUI();
    paneUi.getDivider().addMouseListener(new MouseAdapter() {
        public void mousePressed(MouseEvent e) {
            System.out.println("Mouse was clicked");
    });

Similar Messages

  • How to catch click event on BAR or a BAR GRAPH???

    Hello
    I want to implemnt following things,
    1. there is Bar Graph containing 10 Bars.
    2. So i want to navigate to 10 diff. pages on click of each bar.
    So how to catch click event on BAR or a BAR GRAPH.????

    Hi,
    You can set Destination URI on a graph. The URL can be specifically associated to a particular data point plotted in the graph.
    Detail for the same is provided in OAF developer guide under 'Charts and Graphs' topic.
    --Sushant                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Capture click event on dialog title bar

    Hi,
    I want to capture a mouse release (or click) event on the JDialog's title bar. Adding a mouse listener to the dialog itself does not work of course.
    Is this possible?
    thanks!
    Greg

    You would need to use a "decorated" dialog.
    Then the title bar is actually a Swing component. So you can use the getComponent(...) method of the dialog to get the title bar and add your listener to it.

  • Tabbar tab mouseover or click events..newbie

    I am trying to create a tab menu bar that opens a submenu
    with a mouseover event over each tab. I can't seem to get the
    tabbar children events to do anything. I can get click events to do
    things by reading the index property with a script and import
    mx.events.ItemClickEvent, but not with the code below. And I don't
    understand why the only click event that works below is the one in
    the mx:TextArea tags. Any guidance is appreciated.
    l version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute" height="600" width="753"
    backgroundColor="#FFFFFF">
    <mx:ViewStack x="543" y="381" id="viewstack1" width="200"
    height="200" click="textarea1.text='viewstack'">
    <mx:Canvas label="Home" width="100%" height="100%">
    </mx:Canvas>
    <mx:Canvas label="Locations" width="100%" height="100%"
    click="textarea1.text='bbb'" id="mxLocations"
    rollOver="textarea1.text='ccb'">
    </mx:Canvas>
    <mx:VBox label="View 1" width="100%" height="100%"
    horizontalAlign="center" click="textarea1.text='bww'"
    mouseOver="textarea1.text='bbb'"
    rollOver="textarea1.text='bbbx'">
    <mx:Label text="View 122" fontSize="36"
    mouseOver="textarea1.text='bww'"
    rollOver="textarea1.text='bww'"/>
    </mx:VBox>
    </mx:ViewStack>
    <mx:TextArea x="124" y="528" text="xxx" id="textarea1"
    click="textarea1.text='bbb'"/>
    <mx:TabBar x="10" y="70" width="653"
    dataProvider="viewstack1" click="textarea1.text='tabbar'">
    </mx:TabBar>
    </mx:Application>
    Text

    Thank you Mike, I had itemClick wrong for sure, and I can
    look at event.index and see which tab was clicked and that is
    great. But what I can't do is see which tab had a mouseover or
    rollover event, since event.index does not change with mouseover. I
    am concluding that tabbar has focus and therefore the Canvas items
    do not and that is why the Canvas mouseover events do not fire. Am
    I getting close?
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute" height="600" width="753"
    backgroundColor="#FFFFFF">
    <mx:ViewStack x="543" y="381" id="viewstack1" width="200"
    height="200" click="textarea1.text='viewstack'">
    <mx:Canvas label="Home" width="100%" height="100%">
    </mx:Canvas>
    <mx:Canvas label="Locations" width="100%" height="100%"
    click="textarea1.text='bbb'" id="mxLocations"
    rollOver="textarea1.text='ccb'">
    </mx:Canvas>
    <mx:VBox label="View 1" width="100%" height="100%"
    horizontalAlign="center" click="textarea1.text='bww'"
    mouseOver="textarea1.text='bbc'"
    rollOver="textarea1.text='bbbx'">
    <mx:Label text="View 122" fontSize="36"
    mouseOver="textarea1.text='bwa'"
    rollOver="textarea1.text='bwz'"/>
    </mx:VBox>
    </mx:ViewStack>
    <mx:TextArea x="124" y="528" text="xxx" id="textarea1"
    click="textarea1.text='bbb'"/>
    <mx:TabBar x="10" y="70" width="653"
    dataProvider="viewstack1" itemClick="textarea1.text='tabbar'" >
    </mx:TabBar>
    </mx:Application>

  • I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

    I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

    Hello,
    In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
    However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
    '''about:config'''
    # In the address bar, type "about:config" (with no quotes), and press Enter.
    # Click "I'll be careful, I promise"
    # In the search bar, search for "javascript.enabled" (with no quotes).
    # Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
    To Re-enable JavaScript, repeat these steps.
    '''Add-ons'''
    You can alternatively install an add-on that lets you disable JavaScript, such as
    *[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
    *[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
    Thank you and I hope this helps!

  • Mail divider bar lost

    In Mail 1.3.11 I lost the divider bar (betwwen message list and preview pane) and its handles and I can't get it back. Anyone know how to get it back?

    Hey roam2, You are right. I finally saw the itty bitty button and clicked on it. Thanks

  • Capturing navigation button click event

    Hi,
    Is it possible to capture the navigation button click events on a system form?For example when the goods receipt form is open and i click on navigation button on the tool bar.
    Can help with some sample codes?
    Thanks.
    Satish.

    Hi,
    Here you´ve got an example from the UI API help file.
    Private Sub SBO_Application_MenuEvent(pVal As SAPbouiCOM.IMenuEvent, BubbleEvent As Boolean)
        If pVal.MenuUID = "1288" Or _
            pVal.MenuUID = "1289" Or _
            pVal.MenuUID = "1290" Or _
            pVal.MenuUID = "1291" Then
          If pVal.BeforeAction = False Then
              Select Case pVal.MenuUID
                '// Under the If clause, check each item if it was clicked
                Case "1288"
                    oRecordSet.MoveNext
                    '// If reached EOF show last
                    If oRecordSet.EOF = True Then
                        oRecordSet.MoveLast
                    End If
                Case ...
                End Select
            End If
        End If
    End Sub
    To know the current form, you can use the ActiveForm property.
    Regards,
    Ibai Peñ

  • Activating Click event on Item Renderer only

    Hey. I'm working on a s:list and a click event problem. I have everything working just fine on the component and linking, but as you probably guessed, the event cues when anything on the s:list is clicked, including the scroll bar or empty space.
    Is there a quick fix to make the event only cue when an Item Renderer is clicked inside the list? Help would be much appreciated, I've been trying to solve this problem for a while.
    Thanks!
    RKaster

    Hi RKaster,
    do you need the reference to the item renderer by force or could you immagine a different approach? If you could work around that you could use the change event instead of the click event. The change event gets fired whenever the selection of items in the list change. A click on an item renderer of course will change the selection if the underlying item isn't already selected.
    If you can't work around the need of an item renderer reference you should experiment with the mouseChildren property of the List component (inherited from DisplayObjectContainer, see http://bit.ly/dhqCFS). IMHO of course
    Regards,
    Thilo

  • Hide Navigation Bar .change() event

    Hi,
    in a comp I create a drop down element with this line (sample)
    sym.$('selector').html(   'Default Element
    Element 1
    Element 2' ); 
    Then
    sym.$('selector').change(function () {Do something please;} 
    The Do something works perfectly well. The only issue I have is the DPS Navigation bar appears each time the DropDown is clicked.
    This is not interact with the function, but regarding User Experience, the navigation bar is really noisy.
    In another topic, Bob Bringhurst mention
    "After the HTML content gets loaded, the viewer checks elements with onclick, ontouchstart, etc. handlers. If the viewer finds any of these elements, it shouldn't display the navigation bars (HUD)"
    In my case, my HTML drop down got this on click event, but Navgation bar still appear.
    Is anyone as a fix for that?
    Thanks,
    Benoit

    Hi Folobo, I'm Aztamaca and I'm not a proffesional and expert with DPS, but I tell you my experience. I can only publish Single Edition apps and sometimes I have the same problem like you.
    Bob Bringhurst answered some important: "If the viewer finds any of these elements, it shouldn't display the navigation bars (HUD)."
    I usually forcing the indesign document to make the fund an event. I do that the background image is a button and tell him to go to the same page where this user.
    Could you share your experience too if you learn how jump the difficults publishing with Single Edition by other way? I hope that Adobe doesn't cut our 'tips'...
    A lot of thanks...

  • Update screen on cl_gui_container_bar_xt "clicked" event

    I have a list of buttons in a cl_gui_container_bar_xt object (like the SE80 navigation bar on the left) - I have set up event listiners for the "clicked" event and it works great except for changing screen field values.
    What I need to do is change a screen element when one of these buttons is clicked.
    EG: - I want to change the screen field E070-TRKORR to blank if a button is clicked. Problem is that PAI or PBO are not fired, and it wont work within the event handler...
    My understanding is that the cl_gui_container_bar_xt object uses CL_GUI_TOOLBAR within it for the buttons, so it should work the same, but it's not...?
    Any ideas?

    I have a list of buttons in a cl_gui_container_bar_xt object (like the SE80 navigation bar on the left) - I have set up event listiners for the "clicked" event and it works great except for changing screen field values.
    What I need to do is change a screen element when one of these buttons is clicked.
    EG: - I want to change the screen field E070-TRKORR to blank if a button is clicked. Problem is that PAI or PBO are not fired, and it wont work within the event handler...
    My understanding is that the cl_gui_container_bar_xt object uses CL_GUI_TOOLBAR within it for the buttons, so it should work the same, but it's not...?
    Any ideas?

  • Opening New Browser window for click event on an image

    hi all,
    I want someone to help me out solving the problem of opening
    a new browser window on the mouse click event of an image or a
    button etc.... The new window would contain the datagrid details
    from the main window, but in an expanded form. If at all there is a
    solution, I even want to know whether there is anyway for sizing
    the poped up window,because I dont want the new poped up window to
    cover the entire screen.
    For getting better idea of my problem, the best example I
    could give is the popup window that appears when we click on the
    preview button while posting the message to the forum.
    Someone please do help me out in this regard.
    Thanks,
    amar.

    I'd definitely try to use a Flex popup... but the
    flash.net.navigateToURL method is a simple way to open a popup
    window in a new browser. You can pass any data needed by the new
    page using the URLRequest and/or URLVariables. The URL you navigate
    to could, of course, be another Flex application if necessary. I
    use this only when I need to open a popup window on another site,
    or an HTML formatter report or something similar.
    Concerning yourself with the size of the popup window may be
    a bad design choice also. I, for example, have my browser
    configured to open all popups in a new tab regardless of sizing
    constraints imposed by the designer. If it is absolutely necessary
    for you to have control over the size of your popup window, you
    should follow the advice given by others and use a Flex
    popup.

  • Radio button's click event to script both ".presence" and ".mandatory" -- Need help !

    Hi all,
    I've adopted the script stated in HightlightOneRequiredField.pdf so that the print button in my form can detect and prevent null field before pop up the print dialog. It works fine.
    In my form, I've created a mandatory 2-radio buttons group with click event script written, using ".presence", in each button. When user clicks:
    Button A: make subform A visible and subform B invisible;
    Button B: make subform A invisible and subform B visible.
    Apart from the visibility of the subforms, what I want more is to add a .mandatory script (together with the click event) in the buttons to turn some fields' mandatory in the subforms on and off so that when user clicks:
    Button A: will also turn some fields' value type in subform A to be "User
    Entered-Required", whereas some of that in subform B to be "-
    optional";
    Button B: will turn the subform B's fields to "-Required" and subform A's
    fields back to "-optional"
    However no luck with me. When I press the print button after any of the radio buttons checked, the print dialog still show up even the subforms' fields are null as if those fields' value type always remain "-optional"
    I wonder if this problem is caused by Chinese binding name ? The script written in the radio button B is:
    FormA.presence = "invisible";
    FormB.presence = "visible";
    if (B1.mandatory = "disabled")
    B1.mandatory = "error";
    if (B2.mandatory = "disabled")
    B2.mandatory = "error";
    if (B3.mandatory = "disabled")
    B3.mandatory = "error";
    if (A1.mandatory = "error")
    A1.mandatory = "disabled";
    if (A2.mandatory = "error")
    A2.mandatory = "disabled";
    if (A3.mandatory = "error")
    A3.mandatory = "disabled";
    B1, B2 and B3 represent the Chinese fields' binding name in FormB
    A1, A2 and A3 represent the Chinese fields' binding name in FormA
    (The script in radio button A is reversed in this way.)
    Have I done something wrong in the above (click event) javascript?
    Please help.
    Thanks in advance.
    Alex

    Hi all,
    I've adopted the script stated in HightlightOneRequiredField.pdf so that the print button in my form can detect and prevent null field before pop up the print dialog. It works fine.
    In my form, I've created a mandatory 2-radio buttons group with click event script written, using ".presence", in each button. When user clicks:
    Button A: make subform A visible and subform B invisible;
    Button B: make subform A invisible and subform B visible.
    Apart from the visibility of the subforms, what I want more is to add a .mandatory script (together with the click event) in the buttons to turn some fields' mandatory in the subforms on and off so that when user clicks:
    Button A: will also turn some fields' value type in subform A to be "User
    Entered-Required", whereas some of that in subform B to be "-
    optional";
    Button B: will turn the subform B's fields to "-Required" and subform A's
    fields back to "-optional"
    However no luck with me. When I press the print button after any of the radio buttons checked, the print dialog still show up even the subforms' fields are null as if those fields' value type always remain "-optional"
    I wonder if this problem is caused by Chinese binding name ? The script written in the radio button B is:
    FormA.presence = "invisible";
    FormB.presence = "visible";
    if (B1.mandatory = "disabled")
    B1.mandatory = "error";
    if (B2.mandatory = "disabled")
    B2.mandatory = "error";
    if (B3.mandatory = "disabled")
    B3.mandatory = "error";
    if (A1.mandatory = "error")
    A1.mandatory = "disabled";
    if (A2.mandatory = "error")
    A2.mandatory = "disabled";
    if (A3.mandatory = "error")
    A3.mandatory = "disabled";
    B1, B2 and B3 represent the Chinese fields' binding name in FormB
    A1, A2 and A3 represent the Chinese fields' binding name in FormA
    (The script in radio button A is reversed in this way.)
    Have I done something wrong in the above (click event) javascript?
    Please help.
    Thanks in advance.
    Alex

  • How can I (neatly) control mouse click events in a multi-dimensional array?

    Hello everyone!
         I have a question regarding the use of mouse clicks events in a multi-dimensional array (or a "2D" array as we refer to them in Java and C++).
    Background
         I have an array of objects each with a corresponding mouse click event. Each object is stored at a location ranging from [0][0] to [5][8] (hence a 9 x 6 grid) and has the specific column and row number associated with it as well (i.e. tile [2][4] has a row number of 2 and a column number of 4, even though it is on the third row, fifth column). Upon each mouse click, the tile that is selected is stored in a temporary array. The array is cleared if a tile is clicked that does not share a column or row value equal to, minus or plus 1 with the currently targeted tile (i.e. clicking tile [1][1] will clear the array if there aren't any tiles stored that have the row/column number
    [0][0], [0][1], [0][2],
    [1][0], [1][1], [1][2],
    [2][0], [2][1], [2][2]
    or any contiguous column/row with another tile stored in the array, meaning that the newly clicked tile only needs to be sharing a border with one of the tiles in the temp array but not necessarily with the last tile stored).
    Question
         What is a clean, tidy way of programming this in AS3? Here are a couple portions of my code (although the mouse click event isn't finished/working correctly):
      public function tileClick(e:MouseEvent):void
       var tile:Object = e.currentTarget;
       tileSelect.push(uint(tile.currentFrameLabel));
       selectArr.push(tile);
       if (tile.select.visible == false)
        tile.select.visible = true;
       else
        tile.select.visible = false;
       for (var i:uint = 0; i < selectArr.length; i++)
        if ((tile.rowN == selectArr[i].rowN - 1) ||
         (tile.rowN == selectArr[i].rowN) ||
         (tile.rowN == selectArr[i].rowN + 1))
         if ((tile.colN == selectArr[i].colN - 1) ||
         (tile.colN == selectArr[i].colN) ||
         (tile.colN == selectArr[i].colN + 1))
          trace("jackpot!" + i);
        else
         for (var ii:uint = 0; ii < 1; ii++)
          for (var iii:uint = 0; iii < selectArr.length; iii++)
           selectArr[iii].select.visible = false;
          selectArr = [];
          trace("Err!");

    Andrei1,
         So are you saying that if I, rather than assigning a uint to the column and row number for each tile, just assigned a string to each one in the form "#_#" then I could actually just assign the "adjacent" array directly to it instead of using a generic object to hold those values? In this case, my click event would simply check the indexes, one at a time, of all tiles currently stored in my "selectArr" array against the column/row string in the currently selected tile. Am I correct so far? If I am then let's say that "selectArr" is currently holding five tile coordinates (the user has clicked on five adjacent tiles thus far) and a sixth one is being evaluated now:
    Current "selectArr" values:
           1_0
           1_1, 2_1, 3_1
                  2_2
    New tile clicked:
           1_0
           1_1, 2_1, 3_1
                  2_2
                  2_3
    Coordinate search:
           1_-1
    0_0, 1_0, 2_0, 3_0
    0_1, 1_1, 2_1, 3_1, 4_1
           1_2, 2_2, 3_2
                  2_3
         Essentially what is happening here is that the new tile is checking all four coordinates/indexes belonging to each of the five tiles stored in the "selectArr" array as it tries to find a match for one of its own (which it does for the tile at coordinate 2_2). Thus the new tile at coordinate 2_3 would be marked as valid and added to the "selectArr" array as we wait for the next tile to be clicked and validated. Is this correct?

  • ALV: Issue with double  click event after sorting the ALV

    Hello Experts,
    I have an internal table that populates an ALV grid. When the user doubleclicks a row, my method HANDLE_DOUBLE_CLICK returns the e_row-index value from the ALV Grid. I use this index value to read the internal table, then retrieve additional data.
    My problem is the user may sort the ALV grid before double clicking on a line. If this happens my internal table is not sorted to match the ALV grid, so reading the internal table with the e_row-index value returns the wrong information.
    When the double click event occurs, is it possible to capture the value in column 1 instead of a value for e_row-index?
    There is one more paramter in HANDLE_DOUBLE_CLICK for row id.   It is coming blank in debugging .  what is the purpose of this parameter and how i can make use of it ?
    Regards
    Vivek

    Hi,
    I am Posting The Code Which Uses Double Click Event.
    And This Code will provide the total information to you.
    REPORT  ZALVGRID_PG.
    TABLES: SSCRFIELDS.
    DATA: V_BELNR TYPE RBKP-BELNR.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS: IRNO FOR V_BELNR.
    PARAMETERS: P_GJAHR TYPE RBKP-GJAHR.
    SELECTION-SCREEN END OF BLOCK B1.
    DATA: WA TYPE ZALVGRID_DISPLAY,
          ITAB TYPE STANDARD TABLE OF ZALVGRID_DISPLAY.
    DATA: IDENTITY TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
    DATA: GRID TYPE REF TO CL_GUI_ALV_GRID.
    DATA: L_IDENTITY TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
    DATA: L_TREE TYPE REF TO CL_GUI_ALV_TREE_SIMPLE.
    TYPE-POOLS: SLIS,SDYDO.
    DATA: L_LOGO TYPE SDYDO_VALUE,
          L_LIST TYPE SLIS_T_LISTHEADER.
    END-OF-SELECTION.
    CLASS CL_LC DEFINITION.
      PUBLIC SECTION.
        METHODS: DC FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID IMPORTING E_ROW E_COLUMN.
    ENDCLASS.
    CLASS CL_LC IMPLEMENTATION.
      METHOD DC.
        DATA: WA1 TYPE ZALVGRID_DISPLAY.
        READ TABLE ITAB INTO WA1 INDEX E_ROW-INDEX.
        BREAK-POINT.
        SET PARAMETER ID 'BLN' FIELD WA1-BELNR.
        CALL TRANSACTION 'FB02'.
      ENDMETHOD.                    "DC
    ENDCLASS.
    DATA: OBJ_CL TYPE REF TO CL_LC.
    START-OF-SELECTION.
      PERFORM SELECT_DATA.
      IF SY-SUBRC = 0.
        CALL SCREEN 100.
      ELSE.
        MESSAGE E000(0) WITH 'DATA NOT FOUND'.
      ENDIF.
      INCLUDE ZALVGRID_PG_STATUS_0100O01.
      INCLUDE ZALVGRID_PG_LOGOSUBF01.
      INCLUDE ZALVGRID_PG_SELECT_DATAF01.
    INCLUDE ZALVGRID_PG_USER_COMMAND_01I01.
    ***INCLUDE ZALVGRID_PG_STATUS_0100O01 .
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'AB'.
    *  SET TITLEBAR 'xxx'.
      IF IDENTITY IS INITIAL.
        CREATE OBJECT IDENTITY
        EXPORTING
          CONTAINER_NAME = 'ALVCONTROL'.
        CREATE OBJECT GRID
        EXPORTING
          I_PARENT = IDENTITY.
        CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
          EXPORTING
             I_STRUCTURE_NAME              = 'ZALVGRID_DISPLAY'
          CHANGING
            IT_OUTTAB                     = ITAB.
        CREATE OBJECT OBJ_CL.
        SET HANDLER OBJ_CL->DC FOR GRID.
        ENDIF.
        IF L_IDENTITY IS INITIAL.
          CREATE OBJECT L_IDENTITY
          EXPORTING
            CONTAINER_NAME = 'LOGO'.
          CREATE OBJECT L_TREE
          EXPORTING
            I_PARENT = L_IDENTITY.
          PERFORM LOGOSUB USING L_LOGO.
          CALL METHOD L_TREE->CREATE_REPORT_HEADER
            EXPORTING
              IT_LIST_COMMENTARY    = L_LIST
              I_LOGO                = L_LOGO.
          ENDIF    .
    ENDMODULE.                 " STATUS_0100  OUTPUT
    ***INCLUDE ZALVGRID_PG_LOGOSUBF01 .
    FORM LOGOSUB  USING    P_L_LOGO.
      P_L_LOGO = 'ERPLOGO'.
    ENDFORM.                    " LOGOSUB
    ***INCLUDE ZALVGRID_PG_SELECT_DATAF01 .
    FORM SELECT_DATA .
      SELECT RBKP~BELNR
             RBKP~BLDAT
             RSEG~BUZEI
             RSEG~MATNR
             INTO TABLE ITAB
             FROM RBKP INNER JOIN RSEG
        ON RBKP~BELNR = RSEG~BELNR
        WHERE RBKP~BELNR IN IRNO
        AND RBKP~GJAHR = P_GJAHR.
    ENDFORM.                    " SELECT_DATA
    ***INCLUDE ZALVGRID_PG_USER_COMMAND_01I01 .
    MODULE USER_COMMAND_0100 INPUT.
      CASE SY-UCOMM.
        WHEN 'EXIT'.
          LEAVE PROGRAM.
        WHEN 'CANCEL'.
           EXIT.
           ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    Warm Regards,
    PavanKumar.G
    Edited by: pavankumar.g on Jan 19, 2012 5:30 AM

  • ALV Class Double click event

    Hi All,
    I have created an alv report using alv class. I have handled the double click event in that i am calling transaction using row currenlty selected. But after doing subtotalling the list and then i double click a line it is passing wrong data.
    Points are awarded,
    Regards,
    Bharat Mistry
    Message was edited by: Bharat Mistry

    Hi Bharat,
    Read the internal table contents in double click event with e_row-index , then you will get the data of that particular row.
    check below code :
    local class to handle semantic checks
    CLASS lcl_event_receiver DEFINITION DEFERRED.
    DATA: g_event_receiver TYPE REF TO lcl_event_receiver.
    LOCAL CLASS Definition
    *§4.Define and implement event handler to handle event DATA_CHANGED.
    CLASS lcl_event_receiver DEFINITION.
      public section.
        METHODS:
          handle_double_click
                 FOR EVENT double_click OF cl_gui_alv_grid
                 IMPORTING e_row e_column.
    ENDCLASS.
    CLASS lcl_event_receiver IMPLEMENTATION.
      METHOD handle_double_click.
      read table gt_outtab index e_row-index into
    Regards
    Appana
    *Reward Points for helpful answers
    Message was edited by: L Appana

Maybe you are looking for