JSPM gives JRE error during Update of CE 7.11 to CE 7.2

Hello Gurus,
I downloaded the SPS files for CE 7.2 update from CE 7.11 SPS4.
I started the update using CEUpdateManager. After some time, the update failed and after that when I try to run it again, it fails to login to JSPM and I understand from JSPM logs that JSPM is looking for JRE 1.6.0 or higher, whereas CE 7.11 has JVM 5 which corresponds to JRE 1.5.
The thing is, CE 7.11 and CE 7.2 systems do not need separate JDK/JRE installations as they use these from SAPJVM. But during my upgrade, JSPM has got updated to 7.20 whereas the rest of the components did not and that is where update failed. So now, even if I try to run JSPM, it does not start and only gives the following error message at the command prompt:
Updating JSPM content...
Updating local copy of SAP JVM ...
Execution failed: Java Runtime version 1.5.0_17 detected. JSPM requires Java Run
time 1.6.0 or later to run.
com.sap.sdt.util.diag.DiagException: Java Runtime version 1.5.0_17 detected. JSP
M requires Java Runtime 1.6.0 or later to run.
        at com.sap.sdt.jspm.main.Jspm.checkJVMVersion(Jspm.java:223)
        at com.sap.sdt.jspm.main.Jspm.initialize(Jspm.java:206)
        at com.sap.sdt.jspm.main.Jspm.main(Jspm.java:317)
In JSPM.LOG file, I can see:
Error]: Java Runtime version 1.5.0_17 detected. JSPM requires Java Runtime 1.6.0 or later to run.
I tried to manually patch JVM to 6 level using note 1025085 and tried bootstrapping as well using note 710663 but none of these worked and upon restarting the system, still SAPJVM 5 is getting copied by sapcpe.
Please suggest how exactly should I solve the problem of JSPM needing jre 1.6.0 while SAPJVM providing 1.5. I am pretty sure that installing JRE 1.6.0 on my machine will not help in CE systems and still I have tried that but to no help.
Please help.
Thanks,
Shitij

Hi Mahesh,
I had already downloaded SAPJVM 6 as well. My stack queue was fine.
But, now my issue is solved. It turns out the CEUPDATEMANAGER file that we were using earlier, was still for 7.11 only, whereas we had to use the one from 7.20. We did not realize this mistake because the stack files had been downloaded almost a month ago.
We have now downloaded the 7.20 CEUPDATEMANAGER SAR file and the upgrade worked smoothly.
Thanks,
Shitij

Similar Messages

Customer Coversion Using Interface Table - Error during update

I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MK

Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm

Communication channel: error during update

Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards

ME 808: System error: error during update Table EKAB

Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
Shiva

Hi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

Error during update download

I can't open my itunes
there was an error during update download

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

[SOLVED] Error during update of LUKS header on device ./file

dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)

Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

How to determine different errors during update database with JDBC 2.0

During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
database was not updated.
When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
update a Date field with a non-date value, it still displays the same error message.
How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
display a different customized message indicating the different errors that occurred during updating??
Currently, part of my code is as follows:
          int currentRow = rs.getRow();
          String values[] = new String[ rsmd.getColumnCount() ];
          // Initialize values[] begins here:
          for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
               rs.updateObject( count, values[ count - 1 ] );
          try{
               rs.updateRow();
          catch( SQLException e ) {
               System.out.println( e.getMessage() );
               rs.cancelRowUpdates();
               rs.absolute( currentRow );
Can someone please help me solve this problem?? THANKS.. :)

Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
William

SPS7 .hdbprocedure with INSERT gives privilege error during activation

Hello All,
We have upgraded to SPS7. We are trying to use an INSERT statement on a database table in a .hdbprocedure. For this we removed the READ SQL
addition on the SQL header, made SQLSCRIPTMODE parameter as UNSECURE in Configuration.
But the problem with privilege seems to be at the table level. I try to create a Custom role(.hdbrole). This gets activated fine when I just give the SELECT on the SCHEMA.
But when I add INSERT in addition to SELECT privilege on schema holding the table it gives an error Cannot Activate/No Privilege to activate Catalog Object
The INSERT on the table is not letting me activate the .hdbprocedure or a custom role. Can you please advice what could be the problem.
Also, an SLT has been configured to get data into these set of tables, could this be the problem.
Best regards,
Pavan

Hi Phoenix,
The user should grant the respective read/update/delete privilege on the schema used in the Procedure to _SYS_REPO user.
If this is a SLT generated schema then there are roles generated which provide such privilges o the users you can use them to grant privilege to _SYS_REPO user.
Regards,
Anjali.

HT4623 what is 3004 error during updating iphone

i have downloaded the ios 7 but during updating it is giving error of 3004. plz guide me

https://discussions.apple.com/thread/4034118

Error during updates

Hi I have a problem during updates:
after restar
and so own...
enyone can help me I need to updated Itunes and my printer

About 70% of planet Earth is trying to download the same thing at the same time.
Don’t forget that it is not ONLY Ipad update, .....but also Iphone update too today
Give it some time.
Right now Apples servers are being slammed

U44M1P7 Error during update.

When trying to install a current update in PS CC I got the following error msg: "Update Failed" error (U44M1P7)

Googling "U44M1P7" points to http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Get error during update of indesign & ps

Got automated notification updates available in cc -- hit "install all", bridge & lr update ok -- indesign & ps give error "error encountered during installation (U44M1P7)". my cc subscription is paid up! -- how do I get updates???

-U44M update error http://forums.adobe.com/thread/1289956
--more U44.. discussion http://forums.adobe.com/thread/1275963

Installation error during update to Photoshop Elements 12 and Premiere Elements 12 Bundle.

8 days ago, I purchased the upgrade to Photoshop Elements 12 and Premiere Elements 12, Bundle.
Premiere Elements 12 works fine, but yesterday, I found that PSE12 does not open.
This morning, the update to V 12.1 for both came in, which I downloaded tried to install.
There were two messages:
1) during installation: something like "turn off AdobeActivityScanner" (which was not running according to the Task Manager)
2) after installation:
Photoshop Elements 12.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1P2003
How can I correct this problem? I need to work with Photoshop this week.
Do I need to uninstall this part of the bundle, and re-install? Will the Serial No.still work?
Please help. Thanks.

Update 12.1 installation errors | Photoshop Elements, Premiere Elements

JSPM gives JRE error during Update of CE 7.11 to CE 7.2

Similar Messages

Maybe you are looking for