JSPM phase error after JSPM SP update

Good day
I am experiencing the following problem.
We want to upgrade JAVA SP5 to 7.
1st step in JSPM is to update JSPM itself (ver 7.01.5.2 to 7.01.7.0). This happened without problem, and I restarted JSPM as instructed.
Now, every time I start JSPM in order to load the remaining patches, it reports an error:
An error occurred during the execution of the JSPM_MAIN phase.
Cannot initialise application data. Could not determine if instance 53 on host solapp01 is running. Cannot find instance with instance number 53 on host solapp01 in the cluster.
The log file contains:
Sep 24, 2010 4:26:22 PM [Info]: Checking status of instance 53 on host solapp01...
Sep 24, 2010 4:26:22 PM [Error]: Exception has occurred during the execution of the phase.
Sep 24, 2010 4:26:22 PM [Error]: Cannot find instance with instance number 53 on host solapp01 in the cluster.
Sep 24, 2010 4:26:22 PM [Error]: Could not determine if instance 53 on host solapp01 is running.
Sep 24, 2010 4:26:22 PM [Error]: Cannot initialize application data.
Sep 24, 2010 4:26:22 PM [Info]: Phase JSPM/JSPMPhases/JSPM_MAIN has been completed.
Sep 24, 2010 4:26:22 PM [Info]: Start time: 2010/09/24 16:24:56.
Sep 24, 2010 4:26:22 PM [Info]: End time: 2010/09/24 16:26:22.
Sep 24, 2010 4:26:22 PM [Info]: Duration: 0:01:26.569.
Sep 24, 2010 4:26:22 PM [Info]: Phase status is error.
JSPM_MAIN_1_01.LOG: END
The Java stack is up and running. System has been restarted just in case.
Any ideas would be welcomed.
Regards
Derik

Dear All,
Please follow this procedure tosolve this problem and revert back with your feedback.
Cannot initialise application data. Could not determine if instance 53 on host solapp01 is running. Cannot find instance with instance number 53 on host solapp01 in the cluster
Actually this is happening because you production box is configured in cluster environment and inside your profile directory
you have profiles(instance, default and startup) for cluster instance as well which is located at some other host and JSPM is searching but could not find.
1. All you have to do to solve this is goto > cdpro > list all the files
now carefully create one folder and move all the profiles related to DR server in that folder.
Again start the JSPM and that prompt will not come.
2. One more solution to this problem is apply patch using SDM.
Hoipe it helps.
Regards, Amber S

Similar Messages

JSPM phase error : admin/user/SID does not exist

Hi ,
There is an error message while opening the JSPM
Phase error report:
"cannot read secure store properties .could not set up secure store.property admin/user/SID does not exist.msg.util.dyn.0003.com.sap.security.core.server.secstore.secstoreFS get string value
com.sap.security.core.server.secstore.secstoreFS.Not found exception could not find a record key "admin/user/SID" in the store com.sap.security.core.server.secstore.secstorefs"
checked the config tool secure store and found no entry maintained for /admin/user/SID.
How to add the new entry in config tool and what is post entry procedure
Thanks a ton

Hello Daniel,
You can maintain the Administrator user in secure storage using the config tool.
By default, the value for this config tool property is user Administrator. However, when using the ABAP Engine for persistency, this user is J2EE_ADMIN.
Following are the steps:
       1.      Start the Config Tool.
       2.      Select secure store.
                The configuration for the secure storage in the file system appears.
       3.      Select the key admin/user/<SID>.
       4.      Enter J2EE_ADMIN in the Value: field and choose Add.
       5.      Select the key admin/password/<SID>.
       6.      Enter the password for J2EE_ADMIN in the Value: field and choose Add.
       7.      Save the configuration.
The corresponding link is mentioned below:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/b7ceff3e40fd42be3a6503236f9746/content.htm

HP4501e "print spooler off" error after installing printer update

Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

While updating ipod to ios5 it shows an error after downloading the update

while updating ipod to ios5 it shows an error after downloading the update

Are there any error details like numbers for example?
Did you follow this article about installing iOS5? iOS 5: Updating your device to iOS 5
Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues

Wlan error after a firmware update

Ok there seem to be many posts about this issue but i cannot find anything that seems to work for me.
I not to recently updated my N95 8Gb firmware to 20.0.16 and found that I was having errors with WPA on WLan, previously I had no such problem and the issue only occured after the firmware update.
to add some more info I am on a network with a linksys wrt300n
I have tried wep it works but dont want to compromise security.
All computers on the network are using wireless g and the key is definitely correct when entered
any help would be most appreciated

I don't have N95, but if the firmware is updated to latest version the wpa most likely wpa2. Having wpa in place of wep gives only very little added security for a determined hacker! It will only takes 30min to an hour to crack that. Security like that deter only the free net riders. Try if there is upgrade for your modem/router, its usualy the case. For home network wep or wpa sufficed.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

WEB and WIKI Error after Feb2012 server update

Anyone else having server WEB, Wiki and certificate problems after the last update?

I got this from the log file. Maybe it will help finding the problem.
Feb 27 00:19:54 xxvxx servermgrd[6491]: servermgr_web: XSWebConfig read failed; detail:Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass
          ." UserInfo=0x7fc533d6ad50 {NSLocalizedDescription=Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass

80246002 error after installing Windows Update Agent 7.6.7600.320

This problem prevents Windows Update from being able to search, download, and install updates.
I am experiencing this issue on machines running Server 2008 R2 and Windows 7 Enterprise (I imagine this an issue with Windows Update and not the OS so this is probably affecting other OS' as well).
This problem is becoming widespread quickly.
The proposed fix (method 1) in the article below did not resolve the problem:
http://support.microsoft.com/kb/958056/en-us
Note: Method 2 is not viable when applying more than one update at a time especially when you are updating multiple machines.
Several others are posting similar problems:
http://windowsitpro.com/windows-update/tracking-error-80246002-windows-update-problem
http://forums.techguy.org/windows-7/1132320-windows-update-problems-4.html
This is preventing scheduled server maintenance from being performed.
Could this be a targeted attack? Happening at the end of the week before a long holiday weekend is not leaving me with a very good feeling...
I would hope that fixing this issue would be a very high priority.
BTW - There is no "Windows Update Issue" forum category that I could find - If there is, sorry for posting in the wrong area.
Cheers,
Jeff

My fix that worked...
Reviewed the operational log for the WindowsUpdateClient (buried in the Event viewer here:
Application and Services Logs -> Microsoft -> Windows -> WindowsUpdateClient -> Operational
After review, I noticed that event 30 "Windows Updates established connectivity" was no longer occurring and that event 42 "There has been a change in the health of Windows Update" was the only thing after the error (Event 25 "Windows Update failed
to check for updates with error 0x80246002")
Even though the machine was restarted after applying the "Windows Update Agent 7.6.7600.320" patch and I had tried restarting the Windows Update service, the service appears to be hung.
Solution:
1.) restart the Windows update service
2.) monitor the operational log for the WindowsUpdateClient (refreshing every 5-10 seconds)
3.) verify that event 30 happens (you should see event 38 after restarting the service followed by (2) event 42, then event 30)
4.) Once event 30 happens go to the Windows update GUI and run the "Check for updates" - yay!
5.) You can go back into the operational log and see event 26 "Windows Update successfully found x updates" followed by an event 40 for each update found.
What is really strange is that I checked the first machine that experienced the problem and it magically fixed itself.
It seems like this may have been caused by DDOS attack on the source for windows updates that the Windows Update service connects to. Or the source location was having maintenance performed.
Regardless, in my case, this was not a problem with the OS or the patch but the inability for the Windows Update Service to establish connectivity.
Hope that helps somebody :)
Cheers,
Jeff

Pygame error after today's update

Solarwolf, a pygame game is not working after today's update.
Fatal Python error: (pygame parachute) Segmentation Fault
Aborted
I have no idea what is causing the error. I tried reinstalling pygame and the sdl libraries. But that did not help.

The self test of pygame
python -m pygame.tests.__main__
fails with several errors.
Also, I am not able to run some of the examples that come with pygame: a data/ folder seems to be missing in /usr/lib/python2.6/site-packages/pygame/examples/ .
pygame.error: Couldn't open /usr/lib/python2.6/site-packages/pygame/examples/data/arraydemo.bmp
Could not load image "/usr/lib/python2.6/site-packages/pygame/examples/data/player1.gif" Couldn't open /usr/lib/python2.6/site-packages/pygame/examples/data/player1.gif

ITunes and Quicktime Error after automatice Apple update, need help!!!

So I currently have a new labtop with windows vista. I have been runining iTunes for the pass 3 months already no problems. The Apple automatic update has never caused any problems till now. Quicktime needed to be updated today, and I accecpted the update, prior to that iTunes and Quicktime was working properly. Once the quicktime update was complete, it restarted my computer like usual. Then when I tried to open iTunes this error came up:
"iTunes cannot run because it has detected a problem with your audio configuration"
Now I checked the audio configuration and nothing was changed or anything, that has not been touched at all, so I still think it had to do with the update. The next error was came up when I tried to open Quicktime and it read:
"Runtime Error!
Program C://ProgramFiles/QuickTime/QuickTimePlayer.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information"
So as long as I have been using Quicktime and iTunes I have never encountered this, I tried to re-install but the error kept coming up after it was installed. Please help me out!

try doing following the steps in these articles
http://docs.info.apple.com/article.html?artnum=31115
and
http://docs.info.apple.com/article.html?artnum=93976
hope this helps

Help needed - Excel macro error after Reader 11 update.

I wrote the following section of an Excel 2010 macro to open a selected pdf file with Adobe Reader, then copy all text to the clipboard & then return to Excel to paste &
process the data. The macro works with Adobe Reader 10. After I updated to Adobe Reader 11, Reader 11 will open but I get an error message of file not found. I've gone back &
forth between Reader 10 & 11 from clean installs & the problem stays with 11. The only thing I changed in the macro is the path for where Abobe Reader is located. The only
Adobe Reader preferences I change from the clean install setup is I set the Default View to Single Page continuous. Any help would be appreciated.
'Get the data file (pdf) to open
fileToOpen = Application.GetOpenFilename("PDF Files (*.pdf), *.pdf")
If fileToOpen = False Then Exit Sub
Application.Wait Now + TimeSerial(0, 0, 1)
'Filepath for Adobe Reader 10 program for Windows 64bit systems
MyPath = "C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe"
'Open PDF file with Adobe Reader
Shell MyPath & " " & fileToOpen, vbNormalFocus
'Wait for Adobe to Open file
Application.Wait Now + TimeSerial(0, 0, 5)
'Select all text [Ctrl-a](Adobe Reader set for Single Page Continuous)
SendKeys ("^a")
'Copy selected text [Ctrl-c]
SendKeys ("^c")
Application.Wait Now + TimeSerial(0, 0, 2)
'Turn off screen updating
Application.ScreenUpdating = False
Here's the only difference in the macro for Adobe Reader 11
'Filepath for Adobe Reader 11 program for Windows 64bit systems
MyPath = "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe"

Hi,
I do not see any reason for this to not work.
Is there any difference between the preferences for RX and RXI. Please go to "edit" -> "Preferences" -> "Security(Enhanced)" and uncheck "Enable protected mode at startup".
Are you able to open any pdf from command line with the same command:
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" <<PDF_FILE>>
Thanks,
Amish.

Photoshop CS2 Error after Leopard Software Update

After installing the software update to fix the Keychain and blah blah blah my PS CS2 will no longer allow me to do ANYTHING. I can open it up and run it, open a file I'm working on and if I try to do anything it gives me an error message saying: "Could not complete your request because of a program error"
Any help? I really dont want to reinstall as it's an upgrade version and I'd have to reinstall CS again.
Thanks,
Mike

First thing I would do is boot from the Leopard Install disk and use Disk Utility to Repair Disk and Repair Disk Permissions.
If that doesn't work you might try deleting the PS CS2 preferences.
Note: Adobe does not require you to re-install the previous version when installing upgrade software, you only have to enter the old serial number.

Error after SSL Certificat update

I updated the SSL certificate on a Win2003 SP2 server with IIS6.0
The initial certificat was a single URL certificate and is replaced by a wildcard one.
After installing the certificate (and it's CA chain) using the mmc I changed the certificate in IIS and configured the SSLBinding using "cscript.exe
adsutil.vbs".
The result is an SSL ERROR.
The CA chain and the certificate are two CRT files.
Here is the result of the "certutil.exe -store my"
command :
C:\Documents and Settings\Administrateur.W2K79>certutil -store my
================ Certificat 0 ================
Numéro de série : 4899717f3b1ba89dedb7c472d575cb01
Émetteur: CN=Thawte SSL CA, O=Thawte, Inc., C=US
Objet: CN=*.bourgenbresse.fr, OU=Collectivite, O=COMMUNE DE BOURG EN BRESSE, L=B
OURG EN BRESSE, S=Ain, C=FR
Il ne s'agit pas d'un certificat racine
Hach. cert. (sha1): eb 03 df 43 a8 03 e5 5f b1 52 fc e7 5b a9 0b 0c 19 2a 15 8a
Aucune information sur le fournisseur de clé
Pas de propriétés pour le jeu de clé dans le magasin
================ Certificat 1 ================
Numéro de série : 023fcc
Émetteur: CN=GeoTrust DV SSL CA, OU=Domain Validated SSL, O=GeoTrust Inc., C=US
Objet: CN=www.portailenfance.bourgenbresse.fr, OU=Domain Control Validated - Qui
ckSSL(R) Premium, OU=See www.geotrust.com/resources/cps (c)11, OU=GT68088061, O=
www.portailenfance.bourgenbresse.fr, C=FR, SERIALNUMBER=R2RJ3sRPOrW0Q3XZYvvpcP05
TqodNAru
Il ne s'agit pas d'un certificat racine
Hach. cert. (sha1): 12 49 a6 95 9a 67 05 86 d9 a3 64 cb a7 a7 78 ee 6c eb 94 52
Conteneur de clé = cecd6bee4621365b6e763b9bfcd773cf_b3f7eefb-5c14-4333-a5bb-29
d40b271698
Fournisseur = Microsoft RSA SChannel Cryptographic Provider
Succès du test de cryptage
CertUtil: -store La commande s'est terminée correctement.
Please help !

It seems that the key for the wild card certificate has not been found. The output shows a valid key for the other cert. ("1") but no key information for the wild card cert ("0"). I assume, that when you double-click the certificate in
the computer's Personal store you don't see the message You have a Private Key...
(on the bottom of the General tab), right?
Windows 2003 sometimes needed some extra effort to "connect" key and certificate, in addition to just importing it (I am assuming that you imported it to the machine where you had created the key).
Check if the command line tool certutil is available. If not, install the W2K3 admin pack (download e.g.
here).
Double-click the new server certificate, go to Details...
Scroll down the list of attributes and locate the Serial Number. Copy the serial number value.
At the command shell run as a local admin:
certutil -repairstore my "<Serial Number>"
If this has been successful you should now see the message You have a Private Key... when double-clicking the certificate.
Elke

IPad and iPhone runtime errors after ios 6 update at one site I use

I use an I pad and iPhone 4S. Did iOS 6 updates and have no problems. However today I went to one site, the NGC collectors society ( registery section requiring sign in) that I use and get the following error below. I have cleared the cookies on my iPad and restarted, but still get the same error. I also made sure java script was on. The same with the iPhone. So far this is the only problem I have had with the new ios6. The site works fine with my laptop which is a MacBook Pro that is updated with the latest system software.
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Hi,
Try to deactivate the FACEBOOK INTEGRATION (go to settings).. After i removed it to my iphone 4 All apps are now doing fine... No more crashing of apps :-) hope it works for you...
The problem is with facebook, go to settings / facebook / your user name and delete your account, the do a hard reset (home+power for some seconds).
dont need to delete the facebook app! just delete your integrate account from settings

802.1x Auth Error After Installing AirPort Update 2007-002 and 10.4.9

After installing the AirPort Extreme Update 2007-002 (and 10.4.9, but I doubt that update did it), I am unable to log into my campus's wireless network. I get the message "802.1x Authentication has failed. (Error: 1001 on port en1)"
I've double-checked the settings, and all looks good. Other Macs are able to log in fine but they do not have this update applied.
Other wireless connections from this computer work fine, including using another SSID on this wireless network using WPA/TKIP. Only the 802.1x auth is failing.
I'm a systems admin for the college, and I can see in the radius logs that an error is generated:
"Unexpected error. Possible error in server or client configuration."
I'm the only one getting this error. Anyone have any ideas about this?
Thanks in advance.
truk

I finally discovered what was going on. When doing either the 10.4.9 update or the Airport update, my /System/Library/Keychains/X509Anchors file was either corrupted or completely emptied. The file did remain with 0K size.
I started noticing that all SSL connections from the computer were failing (Safari, iChat, whatever) that depended on the Mac OS X components to do the SSL validation. (Firefox continued to work fine, as it has its own SSL stack.) I then ran the Keychain file check in Keychain, which alerted me to the exact file problem.
My wife also has a MacBook with the same version of Mac OS X, so I was able to copy her X509Anchors file to my computer and everything worked perfectly after that. SSL came back, iChat works, Safari works with SSL, and 802.1x works again.
Hope that helps someone else...

Download Error After CC 2014 Update

I installed updates from the CC desktop yesterday including installing the CC2014 of apps. Some apps did not install completely and were hung up after running overnight.
CC Desktoop > Apps shows the error message "Download Error" with no code. Tried deleting the Library > Application Support > Adobe > OOBE folder and restarting as recommended on a previous post. Still get the same result.
I am working on an iMac.
Any suggestions?

Hi csbleich,
Please refer:
Creative Cloud - Download error - stubborn error
Creative Cloud "Download Error" message
Thanks,
Atul Saini

JSPM phase error after JSPM SP update

Similar Messages

Maybe you are looking for