JSPM upgrade Error during validation of the dependencies of the selected ho

Hi,
We have a strange problem, recently we have upgraded our server from XI 3.0 to PI 7.1 and after the upgrade
as part of post upgrade steps I had to deploy few SDA/SCA files, while I am trying to deploy these files
I am getting the error "Error during validation of the dependencies of the selected hot fixes" during the check queue phase and I am not able to go ahead..
As I am facing the same error for three different kinds of SDA files, I was trying to apply SP03 for my
JSPM version 7.11.0.0.119 but even here I am facing the same error.
I am sure that what ever the files I am trying to deploy are correct because these are instructed by SAP.
I guess I have some problem with my JSPM.
Please help me.
Thanking you in advance.
Sonali

Hi,
There is no SDM in NW 7.1. All the deployments have to be carried out by JSPM itself.
Sonali - Can you check the JSPM logs and give complete log ?
Also can u mention the SDA file names ?
Are they standard SAP SDA files or custom files ?
Cheers......,
Raghu

Similar Messages

JSPM: Error during validation of the dependencies of the selected hot fixes

Hi,
We have a strange problem, recently we have upgraded our server from XI 3.0 to PI 7.1 and after the upgrade
as part of post upgrade steps I had to deploy few SDA/SCA files, while I am trying to deploy these files
I am getting the error "Error during validation of the dependencies of the selected hot fixes" during the check queue phase and I am not able to go ahead..
As I am facing the same error for three different kinds of SDA files, I was trying to apply SP03 for my
JSPM version 7.11.0.0.119 but even here I am facing the same error.
I am sure that what ever the files I am trying to deploy are correct because these are instructed by SAP.
I guess I have some problem with my JSPM.
Please help me.
Thanking you in advance.
Sonali

Just updated your other post -
Java deployment tools on NW 7.1
Error during validation of the dependencies of the selected hot fixes
Btw, could you check the documents of these SDA files in case there is soem common dependency?

Errors during validation

I am trying to burn using iDVD 6 but keep getting an "error during validation" message. There are no warnings in the map menu, and the dvd plays perfectly in preview. No matter what I do, I keep getting this message. Help!

Hi anpak:
Welcome to discussions!
Do you know the rules of chapter markers?
*Make sure no chapter markers are within two seconds of the end of a transition.
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
Does that apply to you?
Sue

Unexpected error during HTTP request to voucher server The operation timed out

I read books from my library through a system called READS. I have successfully used DE 1.0 without any problems, however, when I tried to use it recently it required me to upgrade to 1.5. Well I did so and now the books won't authorize. Here is the error message I am getting:
Adobe DRM Error System: 5 State: 4 Class: 600 Code: 106 Message: Error on request or response from server. Please check your network connection and try again. Scroll below or view error.log for more details.
Adobe DRM client Error: 706 Unexpected error during HTTP request to voucher server The operation timed out
Requested URL: http://207.54.136.76/fulfill/ebx.etd?action=lend&orderid=939605378082105&bookid=ContentRe serveID:B91CC494-23AF-4C6A-9B0C-7DA050C05722-50
Requested URL: http://207.54.136.76/fulfill/ebx.etd ?action=lend &orderid=939605378082105 &bookid=ContentReserveID:B91CC494-23AF-4C6A-9B0C-7DA050C05722-50
--- end ---
I have tried this multiple times with more than one book. Again, they worked just fine before I did the upgrade. I am running Vista SP1.

Never mind, they obviously post the message on the ticket, but it doesn't send an e-mail. I will try what they indicated. Here is their response...
Thank you for contacting Adobe Technical Support.
I understand that you are getting "Adobe DRM Error" in Digital Editions.
We have documented the steps to resolve this error message. Please do
refer to this TechNote:
Error: "Adobe DRM Error" when you activate Digital Editions or access an
eBook
http://www.adobe.com/go/kb402747

Error during validating Project Mgmt Templ. in Item

Hi Gurus,
I am working with PPM 5.0 and facing an issue while creating a Project from Project template that is assigned to an Item type. In Item detail screen, when I click on "Create Project on saving" check-box and select a particular Project Template, I am getting message "Error during validation of Project management template".
Following are the IMG activities I have done:
(1) Define Portfolio Item type:
- Link to Project system = Portfolio and Project Management
- NoAutoPro = " "
(2) Map Item type to Project Templates:
- Item type to Project template = I have mapped two Project Mgmt templates to one Item type
- Item type to Project type = mapped accordingly
(3) In Base System Interfaces -> Application Object Settings -> Define Object Link Types:
- For all 0RPM* objects, I have mentioned Logical and Destination system as newly created Logical system which is already assigned to system client.
After doing these settings also I am facing the above mentioned error.
Can anyone please guide me where I am going wrong?
Thanks in advance.

Hi Ravi,
Considering above mentioned Object link grouping, I also made the changes in DFM.
Following is the screenshot showing same. Unfortunately still no luck.
<< Object type setting >>
<< DFM settings for obj synchronization >>

DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
balu

Hi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

Error during cumulation, No entry found in the table T54C1

I got the following error message since correcting personal area for retro period
Error text - "Error during cumulation, No entry found in the table T54C1 Key 03 75 K 2008 01"
For a personnel number, there was an incorrect org assignment for the period of May 2009 to June last year.

Go ahead and generate payroll period for that payroll area and verify control record with payday rule. Thats missing. Use the table number mentioned in msg to crack issue.

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

Error during Addon Installation Index was outside the bounds of array

Hi wen im trying to install addon on x64 2003 server its throwing me error
Customer library
"Error during Addon Installation Index was outside the bounds of array."
"Error(-2) at EndInstallEx(False) at the end of the addon installation"
Please provide me a solution for this.
Thanks
Rekha

Hi Rekha,
You may check this: Add-on Installer Issue
Is this your add-on or SAP add-on? If it is 3rd party add-on, post it to the other forum
Thanks,
Gordon

SCM5 - SCM7 Upgrade Error during LiveCache upgrade Step C4

We are in the process of upgrading our SCM5 system to SCM7 release level. During livecache upgrade step C4 to load transaction data, we are getting error CONNE_IMPORT_WRONG_COMP_TYPE. The dump says that "when importing the object 'OT_ORDERS", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "/SAPAPO/SAPLOM_UPGR_PARALLEL". The data type is "P" in the dataset, but "C in the program".
Our source livecache version is 7.6.03.12 and target livecache version we are upgrading to is 7.7.04.29. We used BS 7 SR1 liveCache 7.7.04 DVD from service marketplace. We did not use the update DVD since the guide mentioned that customers on SCM5.1 or higher need to run livecache upgrade from update DVD.
All steps in A, B have already been completed.
More details from the ST22 dump -
Error analysis | | An exception occurred that is explained in detail below. | | The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was | | not caught in | | procedure "GET_DB" "(METHOD)", nor was it propagated by a RAISING clause. | | Since the caller of the procedure could not have anticipated that the | | exception would occur, the current program is terminated. | | The reason for the exception is: | | When importing the object "OT_ORDERS", the component no. 5 in the | | dataset has a different type from the corresponding component | | of the target object in the program "/SAPAPO/SAPLOM_UPGR_PARALLEL". | | | | The data type is "P" in the dataset, but "C" in the program. Information on where terminated | | Termination occurred in the ABAP program "/SAPAPO/SAPLOM_UPGR_PARALLEL" - in | | "GET_DB". | | The main program was "SAPMSSY1 ". | | | | In the source code you have the termination point in line 3222 | | of the (Include) program "/SAPAPO/OM_UPG_CLASS_IMPCLUT". | | The termination is caused because exception "CX_SY_IMPORT_MISMATCH_ERROR" | | occurred in | | procedure "GET_DB" "(METHOD)", but it was neither handled locally nor declared | | in the RAISING clause of its signature. | | | | The procedure is in program "/SAPAPO/SAPLOM_UPGR_PARALLEL "; its source code | | begins in line | | 3221 of the (Include program "/SAPAPO/OM_UPG_CLASS_IMPCLUT ".
We are running AIX5.3 and Oracle 10.2.0.2.0.
Any help here will be greatly appreciated.

This is exactly the same with OSS 305147 2010. It will be answered in BC-DB-LCA area.

SAP PI 7.3 : Error during validation

Hello Everyone,
I have an error during the validation, and I don't now where is the problem.
The error is :
     <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30"
                                                xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
          <SAP:Category>XIServer</SAP:Category>
          <SAP:Code area="XML_VALIDATION_INB">CX_XMS_SYSERR_VALIDATION</SAP:Code>
          <SAP:P1>com.sap.aii.utilxi.xmlvalidation.impl.XMLValidationException: XML Validation for payload with root element
                                name Orders , target namespace Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the
                                declaration of element 'Orders'.</SAP:P1>
          <SAP:P2>XML Validation for payload with root element name Orders , target namespace Failed!Errors Encountered
                                During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.</SAP:P2>
          <SAP:P3>Schema Not Available in Cache, try to validation with file system schemas. Validation With File System
                                 schemas also Failed. XML Validation for payload with root element name Orders , target namespace
                                  Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.
                                 </SAP:P3>
          <SAP:P4/>
          <SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
          <SAP:Stack>System error occurred during XML validation</SAP:Stack>
     </SAP:Error>
The XSD File for the validation is the following
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://site.be/Commandes" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://site.be/Commandes">
        <xsd:element name="Orders" type="Orders"/>
        <xsd:complexType name="Orders">
                <xsd:annotation>
                        <xsd:documentation xml:lang="EN">DT_Orders</xsd:documentation>
                </xsd:annotation>
                <xsd:sequence>
                        <xsd:element name="ligne" maxOccurs="unbounded">
                                <xsd:complexType>
                                        <xsd:sequence>
                                                <xsd:element name="Field1" type="xsd:string"/>
                                                <xsd:element name="Field2" type="xsd:string"/>
                                                <xsd:element name="Field3" type="xsd:string"/>
                                                <xsd:element name="Field4" type="xsd:string"/>
                                                <xsd:element name="Field5" type="xsd:string"/>
                                        </xsd:sequence>
                                </xsd:complexType>
                        </xsd:element>
                </xsd:sequence>
        </xsd:complexType>
</xsd:schema>
Can someone give me some input to help me to resolve this problem ?
Thanks a lot
JC

How about a slight change to the xsd? Try with the following, it seems to work fine:
<?xml version="1.0"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <xsd:element name="Orders" type="Orders"/>
   <xsd:complexType name="Orders">
      <xsd:choice minOccurs="0" maxOccurs="unbounded">
         <xsd:element name="ligne">
            <xsd:complexType>
               <xsd:sequence>
                  <xsd:element name="Field1" type="xsd:string" />
                  <xsd:element name="Field2" type="xsd:string" />
                  <xsd:element name="Field3" type="xsd:string" />
                  <xsd:element name="Field4" type="xsd:string" />
                  <xsd:element name="Qte" type="xsd:string" />
               </xsd:sequence>
            </xsd:complexType>
         </xsd:element>
      </xsd:choice>
   </xsd:complexType>
</xsd:schema>
You might also find this tool useful for testing such scenarios:
http://xsdvalidation.utilities-online.info/
By the way - how did you get the xsd that you are currently using?

Error during creation of application entity for the plug-in.

Hi Experts,
As part of creating Content Database source for SES....
We,
1 Activated the Oracle Internet Directory identity plug-in for the Oracle Content
Database instance.
2) However after activating Identity plug-in for Oracle Internet Directory.... ......... we used the csPlugin.ldif file to create an application entity for the plug-in by running the following command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" ....but in the process executing the above command.... getting the following error(we gave correct login details):
SASL/DIGEST-MD5 authentication started
ldap_sasl_interactive_bind_s: Invalid credentials (49)
How can i resolve this.
I have another query...in the command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" which user name should i specify..... is it "cn=oracle" or "cn=orcladmin"
Thanks
peter.

Hi Raford,
Thanks for your reply.
We tried to create Content Database Source with the details we have...
However in this process getting an exception....
11:20:20:778 INFO     main
11:20:20:784 INFO     main          Oracle Secure Enterprise Search, Crawler: Release 10.1.8.2
11:20:20:785 INFO     main          Copyright © 2006, 2007, Oracle. All rights reserved.
11:20:20:785 INFO     main
11:20:20:785 INFO     main          ================== Crawling settings ==================
11:20:20:785 INFO     main          Reading configuration file from /mnt/u08/SOADEVIL/seshome/search/data/config/crawler.dat
11:20:20:785 INFO     main          Agent = Oracle Secure Enterprise Search
11:20:20:807 INFO     main          User = EQ_TEST
11:20:20:807 INFO     main          Database connect string = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=devilrays.appsassociates.com)(PORT=1525))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Devilses.devilrays.appsassociates.com)))
11:20:20:807 INFO     main          Source type is User-defined
11:20:20:807 INFO     main          Source is "BJ_Cont"
11:20:20:807 INFO     main          Document access control policy is user-defined
11:20:20:808 INFO     main          Number of crawling threads = 5
11:20:20:808 INFO     main          Queue table = I1S8
11:20:20:808 INFO     main          URL table = EQ$URL
11:20:20:808 INFO     main          Maximum documents to crawl = no limit
11:20:20:808 INFO     main          Maximum depth to crawl = 2
11:20:20:808 INFO     main          Document size limit = 10M
11:20:20:808 INFO     main          Locale of the crawler message is "en_US"
11:20:20:808 INFO     main          URL exclusion rule = (?i:(?:\.gif)|(?:\.jpg)|(?:\.jar)|(?:\.tif)|(?:\.bmp)|(?:\.war)|(?:\.ear)|(?:\.mpg)|(?:\.wmv)|(?:\.mpeg)|(?:\.scm)|(?:\.iso)|(?:\.dmp)|(?:\.dll)|(?:\.cab)|(?:\.so)|(?:\.avi)|(?:\.wav)|(?:\.mp3)|(?:\.wma)|(?:\.bin)|(?:\.exe)|(?:\.iso)|(?:\.tar)|(?:\.png))$
11:20:20:808 INFO     main          URL exclusion rule = \?.*(.*\+)\1{3}
11:20:20:812 INFO     main          Document read timeout threshold = 30 second(s)
11:20:20:812 INFO     main          Crawler default character set is "8859_1"
11:20:20:812 INFO     main          Crawler default language is "en"
11:20:20:813 INFO     main          Auto language detection is on
11:20:20:813 INFO     main          Auto character set detection is off
11:20:20:813 INFO     main          Document service pipeline is "Default pipeline"
11:20:20:813 INFO     main          Verbose mode is on
11:20:20:935 INFO     main          Caching on: directory = /mnt/u08/SOADEVIL/sesdata/Devilses/cache/I1DS8/, max size = 250, action = SES_TASK
11:20:20:935 INFO     main          Filtering on: filter path = /mnt/u08/SOADEVIL/seshome/ctx/bin/ctxhx, number of filters = 2
11:20:20:935 INFO     main          MIME inclusions = text/html text/plain application/pdf application/x-msexcel application/vnd.ms-excel application/ms-excel application/x-mspowerpoint application/vnd.ms-powerpoint application/msword
11:20:20:935 INFO     main          URL table attributes = url, depth, signature, last_modified, status, url_id, access_url, enqueue_status, TITLE, DESCRIPTION, AUTHOR, CRAWLED_DATE, CONTENT_LENGTH, CONTENT_TYPE, LANG, CACHE_FILE_PATH, DS_ID
11:20:20:936 INFO     main          SQL callback statement is "begin eq_crw.crawler_callback(?,?,?,?); exception when eq_def.search_error then eq_err.raise; when others then eq_err.raise; end;"
11:20:20:936 INFO     main          Cookie support is enabled
11:20:20:937 INFO     main          Maximum number of cookies = 300
11:20:20:939 INFO     main          Maximum number of cookies per host = 20
11:20:20:939 INFO     main          Maximum size of cookie = 4096 bytes
11:20:20:940 INFO     main          Cache file deletion is disabled
11:20:20:940 INFO     main          Crawler plug-in manager class is "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:20:940 INFO     main          SQL hook ID is "8"
11:20:20:940 INFO     main          SQL command hook statement is "begin ? := eq_crw.crawler_get_command(?,?,?,?); end;"
11:20:20:940 INFO     main          SQL response hook statement is "begin ? := eq_crw.crawler_send_response (?,?,?,?,?,?,?,?,?,?,?,?,?); end;"
11:20:20:940 INFO     main          Crawler launched by schedule "BJ_Cont"
11:20:20:940 INFO     main
11:20:20:940 INFO     main          =================== Crawling status ===================
11:20:20:941 INFO     main          Crawling started at 9/18/07 11:20 AM
11:20:21:912 INFO     main          URL manager connecting to Oracle...
11:20:21:974 INFO     main          connected
11:20:22:586 INFO     main          Queue manager connecting to Oracle...
11:20:22:631 INFO     main          connected
11:20:23:497 INFO     main          Invoking "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:501 INFO     main          URL manager connecting to Oracle...
11:20:23:529 INFO     main          connected
11:20:23:531 INFO     main          Initializing crawler plug-in manager "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:531 ERROR     main          SES keystore location: null
11:20:23:532 ERROR     main     null oracle.search.sdk.crawler.PluginException     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479     oracle.search.crawler.WebCrawler:begin:1076     ImtCrawler:run:1831     ImtCrawler:main:480
11:20:23:532 ERROR     main     null oracle.search.sdk.crawler.PluginException     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479     oracle.search.crawler.WebCrawler:begin:1076     ImtCrawler:run:1831     ImtCrawler:main:480
11:20:23:676 INFO     Thread-1          Remote command "reportstatistics" received, argument = "quit"
11:20:23:676 INFO     Thread-1          Executing remote command "reportstatistics"
11:20:23:697 INFO     Thread-1          Send back remote command execution result
11:20:25:944 INFO     main          Shutting down all crawling threads...
11:20:25:948 INFO     main
11:20:25:949 INFO     main          =================== Crawling results ===================
11:20:25:949 INFO     main          Crawling started at 9/18/07 11:20 AM
11:20:25:949 INFO     main          Crawling stopped at 9/18/07 11:20 AM
11:20:25:949 INFO     main          Total crawling time = 0:0:5
11:20:25:949 INFO     main
11:20:25:954 INFO     main          Total number of documents fetched = 0
11:20:25:954 INFO     main          Document fetch failures = 0
11:20:25:954 INFO     main          Document conversion failures = 0
11:20:25:954 INFO     main          Total number of unique documents indexed = 0
11:20:25:954 INFO     main          Total data collected = 0 bytes
11:20:25:954 INFO     main          Total number of non-indexable documents = 0
11:20:25:955 INFO     main
11:20:25:955 INFO     main          Number of times disk cache is full = 0
We have followed the installation details provided in "SESAdmiistratorGuide".
In that guide.... during creation of Content Database source he did not mention any entry for "SES keystore location", and the exception which we are getting is related to "SES keystore location: null" (please look into the exception stack).
could you please guide us.
Thanks
peter.

SQL Data Sync - error during sync. Unable to diagnose the problem.

I have 2 SQL data sync groups setup
First one does a 1 way sync from azure to local db. Sync's only 1 table.
Second one does a 1 way sync from local db to the azure. Syncs 2 tables.
After setting it up and getting a few sync errors I was able to figure out what's wrong by checking the logs and fixing the problems. It was all running fine for a while and now it broke down.
I got a sync error every time sync is attempted - however this time I'm not able to fix anything because I don't have any visibility on what's wrong - when I click on the Log tab in the Azure Management portal it just stays blank - no details come up.
I click [Logs] Wait spinner comes up
And then it looks like this:
Another detail worth mentioning is that the error only occurs for the Second sync group that I have.
Here's what I've attempted so far
I poked around the azure management portal to try to find another way of looking at the logs - looking for something like ftp access to the log file - couldn't find anything like that.
I refreshed schema in the sync rules tab.
Used the SQL Data Sync agent tool on the premise to do the ping operation. Restarted the sql data sync windows service.
Made sure I have the latest SQL Data Sync Agent installed.
I'm wondering what are my options from here...
I'm close to trying to deleting and recreating the sync group... I'm not too comfortable doing this because I know there are some sql tables that get created in the local db to support the operation of the sync - so if I delete the sync group would that automatically
drop those helper tables as well or would I have to drop those manually - If I do drop those then that will obviously brake the other sync group that works fin as well..
Any advice is appreciated. Thanks

hi,
According to your description, it seems the issue is related to SQL Azure, I will move this thread to SQL Azure Discussions forums to get a better support.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JSPM DIR_EPS_ROOT error during the execution of the JSPM_PROCESS phase

dear sap experts
I tried to use JSPM in order to update kernel and support packages.
unfortunately i got errors..
"Cannot initialize application data. could not extract value with key DIR_EPS_ROOT from file
c:/usr/sap/SM4/SYS/profile/SM4_DVEBMGS01_solman40. "
I linked some screenshots document.
<a href="http://itedu24.net/solman/5.8 Applying the Latest Kernel and Support Packages.doc">5.8 Applying the Latest Kernel and Support Packages.doc</a>
as you can see, txn RZ11, i can see the value of DIR_EPS_ROOT.
*. it's another question.
I found j2ee/dbdriver value
it looks like this.
C:/usr/sap/SM4/SYS/exe/uc/NTI386/mssjdbc/base.jar;~~~bulabula..
Is it okay if the format of path is "C:/usr/sap/" rather than "C:\usr\sap\"
thanks.
david
Message was edited by: David Kang (.) SAP@Home

Hi David,
It seams that you have not run JPSM as <sid>adm.Please try to run it as <sid>adm
Best Regards
Nina Petrova
NW LM SL SDT JS (BG)
Sap Labs Bulgaria Ltd.
Error reports: CSS component BC-UPG-OCS-SPJ

JSPM upgrade Error during validation of the dependencies of the selected ho

Similar Messages

Maybe you are looking for