JTA transaction is not present or the transaction is not in active state
Hi,
I am trying to execute an asynchronous bpel process. the bpel process has 5 OSB calls and is taking approximately 100 seconds for completion. The OSB calls in the BPEL are taking 90 seconds for completion. In the end of the BPEL process, after completion I get the following error:
[2010/07/22 01:56:44] BPEL process instance "1220007" completed
[2010/07/22 01:56:44] There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "1,220,007". The reason is The execution of this instance "1220007" for process "BPELProcess1" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.
We do not want to increase the transaction-timeout properties in the server in the Transaction-manager.xml or in the orion-ejb-jar.xml since we have other projects with synchronous processes running in the same server.
Can anybody please suggest a workaround to overcome this issue apart from increasing the transaction-timeout?
Hi 783703,
As Sridhar suggested for your problem you have to set transaction-time out in j2ee/home/config/transaction-manager.xml.
If you use Idempotent as false for your partnerlinks, BPEL PM will store the status till that invoke(Proof that this invoke gets executed).
So better to go for increasing the time instead of going for idempotent as it has some side effects.
And coming to dehydration ....Ideally performance will be more if there are no much dehydration poitns in our process. But for some scenarios it is better to have dehydration(ex: we can know the status of the process...etc)
Dehydration store will not get cleared after completion of the process. Here dehydration means ....it will store these dtails in tables(like Cube_instance,cube_scope...etc).
Regards
PavanKumar.M
Similar Messages
-
Application Parameters not working in the Transactional iViews
We had created transactional iViews for calling the standard SAP Transaction: IQS8 and IQS9. Here the issue is that we would like to populate the default screens for these 2 transactions with different set of default values.
So, we created variants and sending them as an application parameter to these trasnactional iViews. When we call this iView it is displaying these default values as per the variant which we are sending. But when executing that transaction, it seems those application parameters that we send through the iView are not being used to call that transaction.
How to enforce the transaction to make it use the application parameters as default values, does any one has any idea?
Please let me know if any one of you have a solution for this.Hi Venkat,
You might want to try the following approach:
1- Create a new transaction code in your SAP system (using transaction SE93 - maintain transaction) which would be a transaction variant of the transaction you want to call with a specific variant
2- Create a 'SAP transaction' iview that points to the new transaction code you created (SAP information <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">here</a>)
Hope this helps.
Regards,
Joseph -
Err in PO creation-Sales document item is not defined for the transaction
Hi,
I am getting the following error while creating PO
"Sales document item 30000183 000100 is not defined for the transaction
Message no. V1 198
Diagnosis
You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order."
I have used an item category which is copy of TAB and the sales order line item is attached to WBS element.
can any one guide me what needs to be done.
thanksIf you want the sales order creation to initiate a PO creation automatically, check if the "Create PO Automatically" button is ticked on for the item category in Transaction flow tab in tcode VOV7
This will solve your problem, provided your configuration for PO on the MM side is fine.
Reward if this helps. -
I can't buy on hay day game he told me contact iTunes support to complete this transaction after that told me the billing server not respond try again later and the other game same but I can buy games from the AppStore ?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Master data not present in the reporting cube
Dear Experts,
There is a scenario in report design for me.
I have already created the Bex report and all the fields as mentioned are in the sales report.
Client now wants to include two more fields in the report.
One is the keyfig " Net value" which is present in the sales cube and i have already included in the report
and another field which is master data 0profit_center is not present in the cube.
Any ideas how can i include this 0profit center data so that i can display in the report?
As far as i understand, I need to include this master data in the sales Infocube which is being used for reporting.
But i am pondering upon the impact on the system because of this.
Now i have checked the BI system and the ECC table. In VBRP table of ECC, the profit center is present.
But when i see in BI the profit center is not being loaded from ECC but from flat file source system.
So i am confused how to go forward.
Can anyone suggest me what should be my approach?
Best Regards!!You didn't understand what we suggested.
Rather than checking 0profit_ctr master data, you need to find the info objects(which are part of your cube) which have master data. in those 0profit_ctr can be a attribute. if yes then navigation settings will work.
if not then you can add 0profit_ctr to info cube and user master data look up thru routine or option read from master data(bw 7.3).
Other wise, directly add 0profit_ctr to your flat file data source(and cube) and maintain data thru flat file.
To look up your cube and 0pfirt_ctr need to have relations with another info objects other wise not possible. -
Reporting (Project Publish) job is failing with 'The given key was not present in the dictionary'
I am using Project Server 2010 with SQL Server 2008 R2.
I have a PWA Instance which was running fine. I have a big number of projects and I do not keep site for all the projects as we do not need project site in our business.
Everything was running fine but during last few days, some of the jobs like Reporting (Project Publish) and Reporting (Project Delete) job is failing with the same error details for all the projects. I am not able to trace where the data is wrong/corrupt
and how to resolve it.
The error detail and ULS Log is given below anod I would appreciate if someone can guide me where the problem is and suggest me any solution.
QUEUE ERROR DETAIL:
General Reporting message processor failed:
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='4f36afe0-43dc-4143-befc-0452da416e69' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='071aeb7b-540e-45fa-b40b-a94a5d2e8e04' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='55445e77-51e3-40d8-a62f-e6db0b897444' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3ab5a1ba-0915-45bb-a078-4b4b7c38af51' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b27acd8f-6cde-47d4-bd53-5930e84dc940' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b7250544-2a11-4887-8dcd-378b34b33ae1' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingProjectPublish.ReportProjectPublishMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='0706d212-f737-43ea-b694-c420488d57bb' JobUID='ca238fcf-d91b-46d6-a9c2-15f2cc35230d' ComputerName='WebSrv1' GroupType='ReportingProjectPublish'
MessageType='ReportProjectPublishMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine WebSrv1 for entries with JobUID ca238fcf-d91b-46d6-a9c2-15f2cc35230d.
ULS LOG:
Timestamp Process
TID Area Category
EventID Level Message Correlation
01/19/2015 19:05:07.44 Microsoft.Office.Project.Server (0x1D30) 0x23FC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=117.485513497555 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:07.66 Microsoft.Office.Project.Server (0x1D30) 0x2C94 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=192.534598230475 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.16 Microsoft.Office.Project.Server (0x1D30) 0x1CFC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=448.362263674397 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.36 Microsoft.Office.Project.Server (0x1D30) 0x17E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=162.22152253546 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.00 Microsoft.Office.Project.Server (0x1D30) 0x0898 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=557.699412860413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.36 Microsoft.Office.Project.Server (0x1D30) 0x1F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=253.695754010613 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.67 Microsoft.Office.Project.Server (0x1D30) 0x0D68 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=239.76302803952 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:10.64 Microsoft.Office.Project.Server (0x1D30) 0x3324 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=973.469925841736 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:11.92 Microsoft.Office.Project.Server (0x1D30) 0x2DB8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1275.5063556303 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:12.96 Microsoft.Office.Project.Server (0x1D30) 0x0A1C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1041.55499409959 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.15 Microsoft.Office.Project.Server (0x1D30) 0x0518 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=133.891034879385 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.35 Microsoft.Office.Project.Server (0x1D30) 0x14EC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=207.250205426327 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.69 Microsoft.Office.Project.Server (0x1D30) 0x10B4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=267.137845971639 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.93 Microsoft.Office.Project.Server (0x1D30) 0x14E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=209.552772167485 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.10 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=717.808222684698 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.67 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (FillTypedDataSet -- MSP_SRA_GetData). Execution Time=307.24482978413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:17.58 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=123.306566048297 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.12 Microsoft.Office.Project.Server (0x1D30) 0x25F4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CreateSavedTasksForProject). Execution
Time=111.699445284922 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.61 Microsoft.Office.Project.Server (0x1D30) 0x2AC8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_Statusing_BuildTaskHierarchy). Execution
Time=449.279962592357 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tci Monitorableser1 PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] System.IO.FileNotFoundException: The site
http://epm.company.com/sites/Workspaces2/PROJECT_1 could not be found in the Web application SPWebApplication Name=SharePoint - 80. at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken
userToken) at Microsoft.SharePoint.SPSite..ctor(String requestUrl) at Microsoft.Office.Project.Server.BusinessLayer.Project.OpenProjectWeb(Guid projectUid) at Microsoft.Office.Project.Server.BusinessLayer.Project.SetPwsProperties(Guid
projectUid) at Microsoft.Office.Project.Server.BusinessLayer.Queue.ProcessPublishMessage.ProcessMiscellaneousPublishMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tcj Monitorable PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] MiscellaneousPublishMessage failed on project b95c52ba-bc00-4301-aab5-890d0b057c29 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwj Critical Standard Information:PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d
PWA Site URL: http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) RDS: The request to synchronize change(s) to project Project
UID='b95c52ba-bc00-4301-aab5-890d0b057c29'. PublishType='ProjectPublish' failed. Message: 'ReportingProjectChangeMessageFailed'. Message Body: The given key was not present in the dictionary. Error:(null) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4dWithout seeing the history, one possibility might be some corruption in the reporting database. Assuming that you are following best practices for SQL DB management, and this is not a DB neglect problem, then I would try to force a refresh to see if that
helps. You can do this by executing a custom field backup and then restore. Note: Do not do this during production hours. Let us know if that provides any therapy.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG -
Oracle SQL Developer error - "The file-based source procedure Name is not present in the database."
I recently started working on the Oracle SQL developer. I have 'select' privileges on the QA schema and when tried to execute proc in QA. It is giving the error as 'The file-based source <procedure Name> is not present in the database. Was it compiled?'
instead 'you do not have sufficient privileges to execute this procedure'. Did research on internet but with no luck.What configuration changes needed to be done to make it work.Guide me.Sounds like you do not have the correct privileges. What should have been granted to you by the QA user, or some other user with appropriate privileges, is...
grant EXECUTE on "QA"."<PROCEDURE_OF_INTEREST>" to "<YOUR_USERID>" ;
Note that a grant of execute on a procedure has nothing to do with grants of select on some or all of QA's tables and views.
So, as Vadim suggests, from your connection node in SQL Developer's Connections view, if you expand the Other Users node, then expand QA and look in the Procedures node, do you see the procedure of interest? If not, you cannot expect to be able to execute it from your userid's connection. And even if you do see it, you may have some other privilege that permits viewing but not executing, like...
The role SELECT_CATALOG_ROLE
The system privilege SELECT ANY DICTIONARY
And even if you do not see it there, then having certain other privileges granted to you could permit executing it in general, like...
The role EXECUTE_CATALOG_ROLE
The system privilege EXECUTE ANY PROCEDURE
Also, note that the 3.0 release is a bit dated nowadays. Upgrading to 4.0.3 production or even the 4.1 EA2 (early adopter) release will, in general, give you a better experience.
Best wishes,
Gary -
I have asp dotnet website and when I am log in into it then I got an js alert message i.e.
"Given key was not present in the dictonary". When I am going to clear clear browser history then it working fine without error. We know it thats why we are clearing history but client don't know and they dont want to clear history. So Is there solution
of this problem. please suggest me.Hi Vishal Shivade,
Please post in ASP.NET forums, where you could get better help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The source or target cluster ID is not present on the system!
Hi,
During System copy, we are facing issue "Run Java Migration Tool kit"
Phase of Sapinst.
I could found exact error messages sequences which may help you in
understanding the problem.:
==========================================
#Start preparing switch.
#The switch.properties could not be read. Reason: switch.properties (No
such file or directory)
The source or target cluster ID is not present on the system! The
current (source) cluster ID is 787075 and the new (target) cluster ID
is 3137675
==========================
Last error message might be quite familiar to you as this is very
common error message however just wanted to inform you that the "SAP
Note 966752 - Java system copy problems with the Java Migration
Toolkit" could not help me out.
all the possible entries have been updated and retried but no success.
Please suggest if you have face similar kind of problem.
Thanks.
Cheers !!!
AshishHi,
cluster ID is just combination of below parameters:
In our case, my source system (ABC) was refreshed from another system (XYZ) recently
so while installing target system ( DEF), I changed the source system details from ABC to XYZ in below file and retried the
SAPinst screen. System copy has got completed successfully.
Open the file <installation directory>/jmt/cluster_id_switch.properties and edit the line
src.ci.sid=
src.ci.instance.number=
src.ci.instance.name=
src.ci.host=
If in your case source system is not refreshed recently; You may try with functional host name or OS host name etc. details for above parameters.
If this does not work check details of "SAP Note 966752 - Java system copy problems with the Java
Migration Toolkit" which says almost the same thing but I could not get that as the statements related to
box number are bit confusing and contradictory.
Cheers !!!
Ashish -
Hi,
We are currently running SAP BPC 10.1 NW on Hana
Version:
CPMBPC 810 SP 4
SAP_BW 740 SP 9
HANABPC 810 SP 4
EPM Excel Add-in 10 SP 21 .NET 4 build 9094.
On my embedded model. I have a BEX query on a aggregation level which I access in a report using the EPM Add-in Excel .
When I edit my report in EPM Add-in Excel , and I try to select the dimension members for a selected dimension member, I get the following error.
"The given key was not present in the dictionary"
Any assistance to help resolve the problem will be appreciated.
Regards
GavinHi Shrikant,
I had a look at MBR_SEQ , it is a attribute on the dimension member in BW , this relates to a past version of BPC 7.5. We are currently on BPC 10.1 Embedded model , and the MBR_SEQ does not exist on any of the characteristics I have in my info cube.
When I create a web report I am able to access the dimension members using the select dimensions options, the problem seems to be on the EPM Add-in Excel client only.
Thanks
Gavin -
I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud
Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G. -
Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMELHi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL -
Device object not present,restart the system and run setup again????
i install window xp sp2 in my macbook,when i install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error message
" device object not present,restart the system and run setup again"!!!! so i can not fully install bootcamp driver in window!
any can help??
macbook pro 13" 2010 midHi:
Your notebook is not supported by HP for Windows XP.
Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The specific instructions for your model series can be found in the section titled 3. Difficult Models
Paul -
Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?
Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens. -
I had labview software running and talking to all instruments. added a agilent E4440a psa to the GPIB bus and now my code does not run. even when i build a vi from scratch it keeps giving me this error and no communication to equipment. any ideas what happened or how to fix it??
this is the Error code -1073807343 source VISA Open in Keithley 24XX.lvlib:Initialize.vi->Untitled 1 and the error explanationVISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.
I opened MAX and can query all equipment.That's quite alright. I didn't think it was offensive. Please see the screenshots attached.
Thanks a lot,
Pablo
Attachments:
DevMgr-Gral.JPG 175 KB
MAX-Gral.JPG 168 KB
MAX-PortStgs.JPG 138 KB
Maybe you are looking for
-
Forgot my passcode on iPhone 5s, have followed all the steps advised-still not working
I have forgotten my passcode to my iPhone 5s. When I go to restore the iPhone through my iTunes on my mac, it keeps saying that I need to turn off 'Find My iPhone'. Obviously realizing that I can't do that without my passcode, I checked discussions
-
Hi, I have a Imac (intel) and would like to uppgrad from OSX 10.5.8 to Mountain Lion! it seams that I have to take the pass through 10.6.8 ut I can't find any uppgrad awalable for that! Anyone that can help? /th
-
I send emails to a friend in Germany and he recieves it all garbled?
THis is what my email friend recieves when I send a normal email.!!!! Hi Brian I still can't read your e-mails but I thought you might want to read this at least https://uk.eurosport.yahoo.com/blogs/cow-corner/-missing--poster-in-australi a-risks-ups
-
Hi, everyone! I've made a preloader in Flash CS3 with AS2. It has the following code in theory it works, but if i test it, first it shows nothing, and after a while it become visible and shows the preloader bar loading from 90%. the 'preloader' in th
-
EDI - 820 Payment Remittance Advice
What is the flow process to achieve EDI - 820 functionality in Sap? Need documentation how to upload 820's directly into SAP. It would be a great help for me if someone could share their experience. Appreciate your time. Thanks & Regards, Victor