JTabbedPane question. Please give advice.
I am writing some applicaiton which includes a jTabbedPane.(with 4 tabs)
Say I have tab A,B,C,D. Which contains panelA, panelB, panelC and panelD under each tab.
I would like to refresh corresponding panel when user click on the tab.
I tried panelB's focusGained event, but it doesn't work right. I would have to click on some control of other panel for it to work.
How do I trigger a function which user click on B tab? not some control in panelB.
I am new to swing. please give some advice.
Thanks
Add a changeListener to your JTabbedPane which forwards an update to your panels when the current tab is changed,
... or ...
put your updating in a overridden setVisible() in your panels, since the JTabbedPane uses visibility to control which tab gets shown.
Similar Messages
-
Please give advice re: Design view !
Hi everybody,
I have just started work with a company that creates alot of web sites using Deamweaver MX2004 (in design view)
I am only experienced with using code view(mainly in
CS4 and notepad++)
The problem is that any sites I make will be difficult for the other people to change later because they are rendered so differently in design view. ie: CSS rollovers and other layout stuff.
(all my code created in code view validates at w3.)
Please help!
what do you think would be the best thing to do?
Should I just take the time and learn to make sites in
design view?,
is this a common problem w/ MX 2004, would an upgrade
help?,
or is there something else I should do....
I'm really not sure
ThanksDW MX was released about 6 years ago so CSS rendering and editing is lacking. An upgrade would be better for a lot of reasons.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
My I pod touch screen has froze and cannot move onto other pages and it will not switch of either. Please can anyone help
Hello Valerie,
Have you tried a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
This may or may not work the first time around, so be sure to attempt this procedure at least 3 times.
B-rock -
Interview Questions, Please give currect Answers with suitable Examples
1. How to activate the master data. There are Two Methods Explain Them?
2. Types of DSO. And Differences between standard and write optimized DSO?
3. I want to delete the record in the DSO, tell me the procedure?
4. I want to delete the 3d request can u delete in ODS manage?
5. What is line item dimension? When we go for line item dimension?
6. What is cardinality?
7. How to create line item dimension?
8. What is InfoSet? Have you created?
9. What is Multiprovider? Have you created?
10. Can v create Multiprovider using one Multiprovider?
11. Have you done extraction?
12. Tel me the transaction for generic extraction?
13. Tel me about selection, hide, Inversion and field only known and uses?
14. What are the Update modes in R/3?
15. Statistical setup, init, and delta?
16. When we do v2 job run?
17. In three update modes which one we use for three update modes?
18. What is display attribute, and navigational attribute?
19. What is v1, v2, v3 updates.
20. Status of loading performance when doing with display attribute, and navigational attribute?
21. Scenario: I have sales man no and rev. I want another column as commission, how will we get?
22. Scenario: Restriction. Material & rev, I want to restrict the revenue based on material name. How will you do?
23. How can we control the packet size in R/3?
24. What is start routine? End routine? When we go for start routine & end routine?
25. Tell me the scenario on start routine, end routine?
26. What is attribute change run?Hi.
Use SCN search.
Like this: http://www.sdn.sap.com/irj/scn/advancedsearch?query=bwInterviewQuestions
Regards. -
It's on my iPad. In app store, my menu just suddenly jumped from English to Chinese. Anyone know how to change it back to a language I can understand?
Welcome to Apple Discussions
moving to the trash the com.apple.safari.plist preference file will reset Safari's preferences to the default values after you restart Safari. You can locate this file by going to the Finder - HD/Users/User Account/Library/Preferences folder.
Once Safari restarts, you can select your custom preferences, as well as add any address bar icons available i the View Menu>Customize Address Bar. Trashing the preference file ought to take care of your tab dilemma. -
2 part question about insipre 6600.....please give some me some advice.
Ok my first question is:
I need to find a place to purchase the cables that go from the subwoofer to the PC sound card. It is a set of 3 cables, the ones that are color coded, green, black, and orange. I just went to hook up my speakers again and have realized that i am missing the those cables
2nd question.
I would also like to hook these speakers up to my laptop. My laptop is a Acer Inspire 5520-589. The Laptop does have a spdif out and i do beleive that the sound card supports dolby digital. So if i can get Digital sound from the laptop to the speakers somehow that would be great. If not, then no big deal.
If i can only get stereo sound from my laptop to the speakers that is fine also. But, what kind of adapter would i need. I would need to get the 3 3/8" jacks (green, black, orange) from the speakers to the single 3/8" headphone out jack of my laptop, that would be great to.
I was thinking that i could just use headphone splitters, but if i recall correctly some of the cables from the speakers are triple ringed as opposed to a double ring on a stereo headphone jack. I can't check the cables cause i need to find a place to purchase them (hence the 1st question).
Please some advice would be appreciated.DeathGrind wrote:
Ok my first question is:
I need to find a place to purchase the cables that go from the subwoofer to the PC sound card. It is a set of 3 cables, the ones that are color coded, green, black, and orange. I just went to hook up my speakers again and have realized that i am missing the those cables
just google for it...they are lots of such cable. you basically need 2 stereo cable and triple ringed cable as you have mention in your post.
for the other qns...i suggest you go get a proper soundcard to match that 6.1 speaker instead. -
Question:
I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. PhuongHi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
Hi SAP FI/CO GURUS ...... PLEASE GIVE ME INTERVIEW QUESTIONS ON SAP FI/CO
Hi FI/CO gurus
I require your great help to get my brother into SAP House. He had done his FI/CO training and he is trying as fresher into SAP. So i request you to please give me interview questions on SAP FI/CO in topic wise. The reason i am asking here in this forum is, a lot of gurus who are having great experience are there in this group. if i get help from these gurus, that will be great help to my brother into get into SAP FI/CO.
So i request you to please send me interview questions on SAP FI and CO in topic wise. Awaiting for your reply.
Regards
RajHi,
Please find below few questions on FI. I think those are very useful for intervew
SAF FI Technical Interview Questions 1
1. Tell me about FI Organizational structure?
Ans: Client
|
Operating Concern
|
Controlling area1 Controlling Area 2
|
Co. Code 1 Co. Code 2
|
Bus area 1 Bus area2 Bus Area3 Bus Area 4
2. How many Normal and Special periods will be there in fiscal year, why do u use special periods?
Ans: 12 Normal posting period and 4 special periods are in the fiscal year which can be used for posting tax and audit adjustments to a closed fiscal year.
3.Where do you open and close periods?
Ans: PPV is used to open and close the periods based on a/c types considering GL Accounts. Tr. Code. OB52.
4.What do you enter in Company code Global settings?
Ans: 4 digit Alphanumeric key.
Name of the company
City
Country
Currency
Language
Address
5.What is document type, and what does it control? Examples.
Ans: Document type is nothing vouchers containing line items. Several business transac! tions can be identified within a particular document type.
It controls the document number ranges.
It controls the Header part of document
IT controls the line item level of the document
Helps filing of physical document
6. What is posting key and what does it control?
Ans: These are special classification keys. Two character numerical key it controls the entry of line items.
Posting key determines Account type, Debit/credit posting, Field status of transaction.
7. What is field status group, what does it control?
Ans: FSG is mandatory field in ! GL Creation. You use this field to define which fields are displayed when you post business transactions to a G/L account.
A field may have one of the following statuses.
- Suppressed
- Display
- Optional
- Required
8. What is chart of account and how many charts of accounts can be assigned to a company?
Ans: Chart of account is a list of all G/L accounts used by one or several company codes.
For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a Company code.
You have to assign a chart of accounts to each company code. This chart of accounts is the Operating chart of accounts and is used for the daily postings in this company code.
You have the following options when using multiple company codes.
You can use the same chart of accounts for all company codes
If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country.
In addition to the operating chart of accounts, you can use two additional charts of accounts If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries.
The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the co! mpany codes which use different charts of accounts together or separately.
9. What does definition of a chart of account contains?
Ans: chart of account key
Name
Maintenance language
Length of the GL Account Number
Controlling Integration
Group chart of accounts (Consolidation)
Block Indicator
10. Can one COA be assigned to several companies?
Ans: yes. One COA can be assigned to several companies.
11) What is account group and what does it control?
Ans: Account group determines which fields you can configure on the G/L master record. It is necessary to have at least two one for B/S and another one for P&L a/c.
It controls the Number ranges of GL A/C.
The status of fields of the master record of GL belongs to company code area.
12) What is reconciliation account; can you directly enter documents in that a/c?
Ans: When you p! ost items to a subsidiary ledger, the system automatically posts the same data to the general ledger. Each subsidiary ledger has one or more reconciliation accounts in the general ledger.
We cant use reconciliation account for direct postings.
13) How do you control field status of GL master records and from where do you control!
Ans: Field status variant is maintained all FSGs.
14) What are the segments of GL master record?
Ans:
- COA Segment
A/C group
Nature of account
Short text
GL a/c long text
Trading partner
Group Account Number
- Company code segment
Account currency
Tax
Reconciliation a/c for a/c type
OIM,LID,FSG.
15) What does Field status group assigned to a GL master record controls?
Ans: It controls the account assignments that are made to the account. Specifically the field status group controls whether postings to cost centers, internal orders, profitability segments and so on are required, not allowed (suppressed), or optional.
16) What is Country and operational chart of account? Why do you use group chart of account?
Ans: Operational chart of account Day to day activities It is mandatory.
Country COA Its used for legal specific requirement of each country. Its additional and optional.
Group COA used for consolidation of Company codes. This is for group consolidation purpose.
17) What are all the segments in a Customer/Vendor master record?
Ans: Segments in Customer Segments in Vendor
- General Data segment General data segment
- Company code segment Company code segment
- Sales area segment Purchasing organization Segment
18) What is open line item management? What do you mean by clearing open line items?
Ans: Open item management is further reconciliation function. OIM allows you to display the open and cleared items and amounts in an account. OIM should be used if an offsetting entry is made for every line item posted in the account. The a/c is reconciled and cleared against another account. Ex. Salary clearing account and GR/IR Clearing account.
19) What is residual payment and part payment?
Ans: Residual payment it clears original invoice with incoming amount and create new line item for remaining outstanding amount.
Partial payment it leaves the original invoice amount and creates new
line item for incoming amount.
20) What is internal and external number ranges?
Ans: Internal Number Ranges: Doc. No will be provided by the system automatically in serial order allotting the next available progressive number. The number must be in numerical.
External Number ranges: Doc. No will be given manually by the end user. System will not lock no automatically in this case. User can pick the number randomly. Number may be an alpha numeric. -
I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?
Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437 -
I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?
Are you choosing a different plan before tapping Done?
To downgrade, you should be doing the following:
Go to Settings > iCloud > Storage & Backup.
Tap Change Storage Plan.
Tap Downgrade Options and enter your Apple ID password.
Choose a different plan to use when your current storage plan expires.
Tap Done. -
Please give me advices when to use black and white sliders in LR4.
Please give me advices when to use black and white sliders in LR4.
I use blacks and white sliders on every photo (this does not necessarily imply non-zero values). I consider them as important as any other slider. Not optional, not for fine tuning - include consideration each iteration.
Although that is contrary to what Adobe and many "experts" recommend, I tried doing it their way too but I could not get the results I wanted in most cases.
The "concept" and original intent is for fine tuning, but the implementation is not. I often set whites to +20, +30, +40. This has a radical effect on overall exposure which is the most important thing to get right in PV2012. And it generally requires compensatory adjustment of highlights, shadows, and sometimes contrast...
Likewise, optimal shadow toning can include radical blacks adjustment - sorry Adobe/experts/defenders, but for me - it's true. And, blacks slider, like whites, affects entire histogram, a lot.
Summary:
========
If you want to keep things as simple as possible, then use sparingly and use last (gag), but if you want your photos to look how you want them to look - as good as possible, then use liberally, and pay the price...
More info here: http://forums.adobe.com/message/4259091#4259091
Rob -
I am trying to change my password, but not remember the security questions and not access recovery email. Please give me a solution.Ana Maria Cappatto Simoes/ F. 11.50414433
Welcome to the Apple Community.
1. Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
2. If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
3. If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
Please give me advice about....what is the best virus guard in store and is virus worked in iPhone (my English is not good sorry)
If you are gettin spammed via e-mail or text that your IOS has a virus (usually says call some 800 number) then these are a scam - do NOT contact these crooks
-
Please give me answers for the following interview questions ?
Dear friends,
Greets............................................
Pls give me solutions for th following questions?
1.How to record BDC using Call Transaction without screen sequence of a particular transaction code?
2.How to initiate the Call Transaction by coding without using Call Transaction Mode 'S' or 'A'.
3.How to run the BDC program without legacy file from Presentation Server. If Application Server how?
4.How BDC overcomes BAPI?
5.Difference between Function Module and BAPI.
6.How to create a BAPI.
7.How to display Footer text in last page of the script.
8.How to display Footer text in last page of the script without touching the layout only using print program.
9. Standard text creation without using SO10 . How to save?
where to save? How to include in the print program?
10.How Script overcomes Smartforms?
11. How to access smartforms thru programs without using SSF_FUNCTION_MODULE_NAME.
12.In smartforms First page should be portriat and second page must be landscape format. Is it possible?
13.How to create internal table globally.
14. How to delete F4 help for a particular field in the selection screen.
15.How to set the password field in the selection screen as it is in the initail screen containing Client, Username,Password.
17. How to use the Hash table algorithm and how access it.
18. Prerequisites for FOR ALL ENTRIES.
19.MENTION the Tcode for performance issue Other than SLIN,SE30,ST05 ?
20. Table Types?
21SAP LUW
22.Types of Lock objects.
Thanks in Advance********************************************
Regards
Raj kumarFor BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Hi,
Please go through the following :
ABAP Interview Questions
1. How data is stored in cluster table?
Each field of cluster table behaves as tables which contains the no. of entries.
2. What are client dependant objects in abap/sap?
SAP Script layout, text element, and some DDIC objects.
3. On which even we can validate the input fields in module progams?
In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)
4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' to get material and material group for the plant.
5. How do you get output from IDOC?
Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.
6. When top of the page event is triggered?
After excuteing first write statement in start-of-selection event.
7. Can we create field without data element and how?
In SE11 one option is available above the fields strip. Data element/ direct type.
8. How do we debug sapscript?
Go to SE71 give lay set name , go to utilities select debugger mode on.
9. Which transaction code can I used to analyze the performance of ABAP program.
TCode AL21.
10. How can I copy a standard table to make my own z_table.
Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.
1. What is the use of 'outerjoin'
Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view.
In case of inner join there should be an entry in al the tables use in the view.
2. When to use logical database?
Ans. Advantage of Logical databases:
less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
3. What is the use of 'table index'?
Ans .Index is used for faster access of data base tables.
4. What is the use of 'FOR ALL ENTRIES'?
Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.
If there r more than 10000 records SELECT FOR ALL ENTRIES is used.
Performance wise SELECT FOR ALL ENTRIES is better to use.
5. Can you set up background processing using CALL TRANSACTION?
Yes,Using No Screen Mode.
6. What are table buffers?
Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed
directly from the buffer of the application server. This avoids the time-consuming process of accessing the database.
Buffering is useful if table needs to be accessed more no. of times in a program.
ABAP Technical Interview Questions:
1. What is the typical structure of an ABAP program?
2. What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?
3. What should be the approach for writing a BDC program?
4. What is a batch input session?
5. What is the alternative to batch input session?
6. A situation: An ABAP program creates a batch input session. We need to submit the program and the batch session in background. How to do it?
7. What is the difference between a pool table and a transparent table and how they are stored at the database level?
8. What are the problems in processing batch input sessions? How is batch input process different from processing on line?
9. What do you define in the domain and data element?
10. What are the different types of data dictionary objects?
11. How many types of tables exist and what are they in data dictionary?
12. What is the step-by-step process to create a table in data dictionary?
13. Can a transparent table exist in data dictionary but not in the database physically?
14. What are the domains and data elements?
15. Can you create a table with fields not referring to data elements?
16. What is the advantage of structures? How do you use them in the ABAP programs?
17. What does an extract statement do in the ABAP program?
18. What is a collect statement? How is it different from append?
19. What is open sql vs native sql?
20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of using it?
21. What is the meaning of ABAP editor integrated with ABAP data dictionary?
22. What are the events in ABAP language?
23. What is an interactive report? What is the obvious diff of such report compared with classical type reports?
24. What is a drill down report?
25. How do you write a function module in SAP? Describe.
26. What are the exceptions in function module?
27. What is a function group?
28. How are the date abd time field values stored in SAP?
29. What are the fields in a BDC_Tab Table?
30. Name a few data dictionary objects?
31. What happens when a table is activated in DD?
32. What is a check table and what is a value table?
33. What are match codes? Describe?
34. What transactions do you use for data analysis?
35. What is table maintenance generator?
36. What are ranges? What are number ranges?
37. What are select options and what is the diff from parameters?
38. How do you validate the selection criteria of a report? And how do you display initial values in a selection screen?
39. What are selection texts?
40. What is CTS and what do you know about it?
41. When a program is created and need to be transported to prodn does selection texts always go with it? if not how do you make sure? Can you change the CTS entries? How do you do it?
42. What is the client concept in SAP? What is the meaning of client independent?
43. Are programs client dependent?
44. Name a few system global variables you can use in ABAP programs?
45. What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
46. How do you take care of performance issues in your ABAP programs?
47. What are datasets?
48. How to find the return code of a stmt in ABAP programs?
49. What are interface/conversion programs in SAP?
50. Have you used SAP supplied programs to load master data?
2. Adapted from response by Maram Roja on Tuesday, June 15, 2004
1. What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?
2. What are logical databases? What are the advantages/disadvantages of logical databases?
3. What specific statements do you using when writing a drill down report?
4. What are different tools to report data in SAP? What all have you used?
5. What are the advantages and disadvantages of ABAP query tool?
6. What are the functional areas? User groups? How does ABAP query work in relation to these?
7. Is a logical database a requirement/must to write an ABAP query?
8. What is the structure of a BDC sessions.
9. What are Change header/detail tables? Have you used them?
10. What do you do when the system crashes in the middle of a BDC batch session?
11. What do you do with errors in BDC batch sessions?
12. How do you set up background jobs in SAP? What are the steps? What are the event driven batch jobs?
13. Is it possible to run host command from SAP environment? How do you run?
14. What kind of financial periods exist in SAP? What is the relevant table for that?
15. Does SAP handle multiple currencies? Multiple languages?
16. What is a currency factoring technique?
17. How do you document ABAP programs? Do you use program documentation menu option?
18. What is SAPscript and layout set?
19. What are the ABAP commands that link to a layout set?
20. What is output determination?
ABAP Interview Questions
1.Without using Tcode SE11, How can we enter the values in to the table???
2.What is the difference between Collect statement and Append Statement???
3.What do you mean by correction and Transportation system???
4.What is the difference between User Exits and BADI????
5.How can we identify User exits in our screen???
6.What do you mean by Inbound and Outbound interface???
7.In realtime do we configure ALE systems or Administator will take care of that??
8.How to release an object???
9.What is the flow of a Sales document???
10.What is the flow of Purchase order???
12.What is the flow of Invoice???
13.What are the standard IDOC's used???
14.What do you mean by table control???Where will we use this???
15.What are field symbols??Where will we use these symbols???
Deepti
1. There are other ways of entering data into a DB table. ex. B D C
2. Collect statement collect/adds the records basing on a key field. allows to create summarised data sets.
Append will append/add a record at the end of existing records
8. to release an object - use se10/se9
9. sales doc flow: S. A. - S. O. - Delivery - Billing
12. Delivery - invoice.
15. field symbols are used for dynamic allocation. at runtime u can assign a concrete field to field-symbol.
Kishore
1. you can go to abap editor (se38) and use insert statement for insertion update for update and modify for modifications.
2. collect will not allow duplicate entries, while append can allow duplicates.
3. if any changes are made to objects they are to be transported to different systems i.e, change and transport.
4. in user exits we go by general method for enhancements while BADIs we use objects (oops concepts)
methods for enhancement.
14. table controls are enhanced version for step loops where we can expand rows .main difference between these two
is step loop can be expanded to two lines table controls can`t.
15. field symbols are just like pointers concept which are used in C language. We use them when we want to refer to
the fields considered,it doesnt allocate any memory for it.
Venu Rapolu
1. Ans: Using BDC., LSMW,,ALE., BAPI
2. Ans: Collect: it adds the numeric fields to the existing non numeric key field records., thereby avoiding duplicate
values., and append will simply adds the record
3 . Ans: The CTS contains work bench organizer and transport system :
The workbench organizer is used to record and contol changes to the ABAP/4 development objects;
The transport system is used to move objects from an SAP dev.system to production system
6. Ans: Outbound interface is used to send IDocs to the ALE server.,
Inbound interface is used to Analyse the received Idoc.
7. Ans: We (ABAPers) don't do.
8. Ans: se09 or se10
13. Ans: MATMAS
CREMAS
DEBMAS
GLMAST etc...
14. Ans: to display records in table format., we use in Screens
15. Ans: we assign the field content at run time with ASSIGN stmt.
Satish D
1. goto se16 u can view the table contents
2. collect will collects all the numeric fields of nonnumeric field values
append will append record at the end of table
3. when we are creatiing new task like dev. a new prg.. after completion of dev. that will be trnsported to testing system or production system to do that we are assigning an
transport request from our dev.class(system) by using se09
4. badis are dev. by class and inheritence methods where as user exitsdev by SAP only and empty shells filled wit user logic
5. go to system then status
6. outbound generating an idoc in ale layer with master_idoc_create_messgetype,
inbound is receivng system with idoc_inbound_process, gives an return variable wether it is sucess or not
7. no we have to configur that
8. go to se09 or se01 there write your task no and use release button it will asks whats the other system name
and number enter them and relase by pressing jeep button
9. inquiry
quotation
sales order
shipping
delivery
invoice
return goods
12. after creation of delivry note invoice is prepared
13. master_idoc_distribute will generate standard idoc
Deepti
I am enclosing some of answers which I know.
1. We can use t.Code SE16 to enter values into table only if table maintainence is allowed for that table.
2. Append will add new entries into the table where as collect add into the numeric type fields if other charatcer fields
matches to your selection criteria.
3. CTS used for creation of ABAP development transport requests.The transaction code for this is SE10.
4. UserExits r used for adding additional functionality to the existing SAP standard transactions.Using UserExits we can add additional functionality standard SAP functionality without making any changes to the original code.BADI is a standardized interface for ABAP sources that enables partners and customers to enhance SAP-delivered programs in their namespace.
5 .We can identify User exits by using transactions CMOD and SMOD.
6. After entering transaction code SE10 select the transport request which u want to transport and click on transport icon(Truck symbol) to release it.
10. Purchase Requistion->RFQ->Vendor Evaluation->Purchase Order(ME21).
14. Table control is the only facility provide thru dialog programming when we come acrosse the use of updating standared,deletion,insertion and all database operations.
15. Field symbols r pointers to the existing data types(like 'C') which does not allocate any memory space. These are used faster access of data.
Answers to some ABAP Interview Questions:
Questions which I have faced in an interview:
1) What is runtime analysis? Have you used this?
2) What is meant by performance analysis? Have done anything to improve the performance?
3) How to transfer the objects? Have to transferred any objects?
4) How did you test the developed objects?
5) What is the difference between SAP Memory and ABAP Memory?
6) In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record
7) What is the procedure you followed to upload the data?
8) How did you handle errors in Call Transaction?
9) Among the Call Transaction and Session Method, which is faster?
10) What are the difference between Interactive and Drill Down Reports?
11) How to pass the variables to forms?
12) How to create a link between modified form and modified print program?
13) What is the table, which contain the details of all the name of the programs and forms?
14) How did you test the form u developed? How did you taken print?
15) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
17) What is pf-status?
18) Among "Move" and "Move Corresponding", which is efficient one?
19) What are the output type and Tcodes?
20) Where we use Chain and Endchain?
21) Do you use select statement in loop endloop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
Go thru these answers:
1) What is runtime analysis? Have you used this?
It's checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.
2) What is meant by performance analysis? Have done
3) How to transfer the objects? Have you transferred any objects?
4) How did you test the developed objects?
I was testing a developed object. There are two types of testing
- Negative testing
- Positive testing
In negative testing we will give negative data in input and we check any errors occurs.
In positive testing we will give positive data in input for checking errors.
8) How did you handle errors in Call Transaction?
We can create a internal table like 'bsgmcgcoll'. All the messages will go to internal table. We can get errors in this internal table.
Below messages are go to internal table. when you run the call transaction.
- Message type
- Message id
- Message Number
- Variable1
- Variable2
- Variable3
9) Among the Call Transaction and Session Method, which is faster?
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
10) What are the difference between Interactive and Drill Down Reports?
ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
Drill down report is nothing but interactive report...drilldown means above paragraph only.
11) How to pass the variables to forms?
12) What is the table, which contain the details of all the name of the programs and forms?
Table cont -
Please give me Answers of below questions.
Hi ,
1) How to define size of the cube?
2) How to define structure properties of the Bw objects? like as infoobjects,ods,cube,multiprovider,infosets like that...
3) What is diff between infoprovider & Data provider and multi cube & multiprovider?
4) What is use of identificaion,selection and unit And Currencies tabs in the designing of multiprovider ?
Please give me answers above questions.
Thanks & Regards,
Guna.hi raya,
for u r fourth one
with the help of identification you can define which field from which dataprovider has to provide.
though the selection you can define the object from which you have to get.
go through these threads
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/bc734190ba137de10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/751be690-0201-0010-5e80-f4f92fb4e4ab
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55
go through this help
http://help.sap.com/saphelp_nw2004s/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/bc734190ba137de10000000a155106/content.htm
if it helpful reward the points.
Regards
mahesh
Maybe you are looking for
-
Hi All, I already calculated a row(Add Total row) like Gross profit within Group1 (a,b,c,d,e which are sub groups) using Previous and current scope column group values. ex: Gross Profit = a - b. (within group1) Gross Profit = Previous(Sum(Fields!Tra
-
How to expose methods having 'Collections' in their signature ?
Hi folks, I need to expose a method as a web service which has a return type as Collection, ant task gives exception hinting that it could not find a suitable xml type for the class mentioned in the autotype task. I wrote a facade to the method and t
-
We have a 10.3.2 clustered environment and need to verify that all our managed servers will start in the event the admin server goes down. So when I run the startmanagedWebLogic.cmd from the domain\bin folder it DOES start the managed server okay. Ho
-
How Do I *Stop* Quattro Pro from Converting Access and Excel Files?
Ever since I installed WordPerfect 7, I've had periodic difficulties of having stored Excel files open in Quattro Pro. Normally, I can easily correct that by retrieving the files from within Excel. But now a more difficult problem has presented its
-
How to set Internet home page in c2-01 model
Hi Friends, Can anyony tell me how can I set my internet home page (both for accessing by pressing 0 and from internet folder) in C2-01 model? Thanks in advance!