JTAPI, CallManager 3.3 and external calls problem

Hi everyone,
I'm putting together an application that uses JTAPI to track call times.
When I'm tracking an internal call, the call time is pretty much exact and my application gets notified about all call events.
But when tracking external calls (calls that go to the public telephone network) I've noticed that as soon as the call is directed to the router (a Cisco 3800), CallManager sends a connected event when in fact the phone on the other side is still ringing.
Even if the external call never gets answered I get a connected (active call) event.
I have a trace dump of my application that shows the events when they happen and I can provide that if needed but for now I was wondering what, if anything, should be configured either in CallManager 3.3 or the Cisco 3800 so that events are triggered correctly, i.e. get one connected event when the call is actually answered and not when CallManager passes the call to the router.

Hey all
Just got a 17" i7 MBP a few weeks ago, anxious of all the spinning beachball freezes people have reported in the Apple forums. Thankfully, I have none of these problems, however, I have a problem that's just as annoying.
I have my laptop connected to an Eizo 24" Widescreen via a display port to DVI adapter, using the extended desktop functionality. I started fine, and I have pretty much the external monitor connected 90% of the time. But then after a few days (and this happens now 2-5 times ever day), the screens will go black, once entering sleep mode for the screens only, and I can't wake them up, only do a hard reboot via the power button. it's really annoying, as I can't leave the monitor plugged in, while I go do other stuff. When the MBP is on it's own, there's no problem.
Also, sometimes when starting up, a few seconds into the desktop showing, I get severe graphics corruption, all kind of colours on both monitors, and I can only o a hard reboot to recover it. No problem as well when only using the MBP without the external monitor.
The only good thing about these problems are that wen I push the machine hard (I am a graphic designer, so it get's pushed to max maybe 5 hours a day), there's no problems what so ever, it's like it's more tend to crash when cold. No problems during intense gaming as well.
I run solely on the geforce card, as I have read a lot of problems are due to the switching of cards.
Anyway, just wanted to chime in, hopefully Apple will deliver a solution for this soon. My old 2007 MBP was rock-solid, and so far this has been the least stable Mac I have owned. Love it still though.
Lars

Similar Messages

  • Mid 2010 Macbook Pro sleep and external display problem

    I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
    I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
    It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
    Any help is much appreciated as its starting to frustrate me now...
    Many thanks
    oh and im running OSX 10.6.3

    I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
    Manually detecting displays in settings doesn't work.
    Disconnecting and reconnecting mini display port doesn't work.
    Turning off power to cinema display and powering back up doesn't work.
    To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
    No ideas anyone??

  • 10.4.7 update  and external firewire problems with HD corrupion

    Dear all,
    Advised by Jpfresno I started this new topic about Tiger 10.4.7 update.
    I will repeat my post and what was happening 2 weeks ago:
    “In 5 years 10.4.7 update was a tragedy for my Powerbook Ti 667. When I update from 10.4.6 to 10.4.7 my 300 GB firewire drive gets corrupted, after repairing it with DiskWarrior and after connecting it to my PowerBook my computer freezes and I must shut it down via powerbutton. Safari also crashes after the update.
    I just erase my Hard Drive and after that install 10.4 and update with combo to 10.4.7. But I had the same problems: finder freezes with connected firewire devices and also safari when browsing. I spend a week trying to solve the problem but no luck.
    Yesterday and with no firewire devices, 10.4.7 freeze and I have big trouble in order to started my powerbook!!! Even when i insert the 10.4 install DVD it did not detected my HD. Finally I get it to work and install 10.4 and combo update to 10.4.6 and everything works. My external firewire drive and safari. I already diagnose my HD with disk utility, TechTool and directories with Diskwarrior and everything is ok.
    I clone my 10.4.6 to firewire, boot from it and everything is working. I let my external drive connected and finder does not freeze.
    My conclusion is that the problem is 10.4.7 update. It only give me problems and I was getting crazy with it. 10.4.6 is working good and I do not advice anyone to update to 10.4.7.”
    Last week after reinstalling 10.4.6 I started to have HD problems with my Powerbook 667. I did a surface scan with TechTool I it reported bad sector. Then I done a zero disk format but after a second surface scan TechTool also reported bad sector. Then I take the decision to replace my internal HD. I bought a Samsung 40GB Hard Drive and installed it on my PowerBook. Then I have done a clean installation of 10.4.6 with all applications that I need and clone it to my hard drive with Intego Personal Backup software. Everything works on 10.4.6. and external firewire drive.
    After that everything is ok. But I decided to test if my problem derivates from 10.4.7 update or from previous HD corruption. Then I install 10.4.7 update on my Internal Hard Drive. Everything is working good but after connecting my external Hard Drive the finder started to freeze!!!!!!!!!. After that I tried cloning HD to external firewire with Intego personal Backup. Everything was working good but when it was finishing the backup process started to give errors!! I started panic. I interrupted the backup process but after and after restart I found something strange with 10.4.7. The system started up, I login but I could not started any application!!!??? All my application died!
    Then I have done one more clean installation of tiger and 10.4.6 update.
    My conclusions are that the 10.4.7 update causes all the problems that I have on my PowerBook, because I used the same methods and same software/hardware on 10.4.6 and did no have any problem.
    This last two weeks were very difficult to me. I tough that these problems do not happen with Apple computers but I was wrong!!! It is very hard to me to deal with it. I always said to my friends that I never had problems with Apple computers. I accept that a hard drive died because the use of it but I can not accept that a system update cause me 2 weeks of hard problems and make me loose precious work information! I always love apple computers and Apple OS but now I am disappointed
    If anyone can explain what happen or have a solution for those problems?
    Thanks for the comprehension and collaboration.
    Best Regards
      Mac OS X (10.4.6)  

    Hi, alsvieira.
    There are some things you did not check in all of your troubleshooting:
    1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
    2. re: FireWire troubleshooting: Here is some general troubleshooting advice that may help if problems return with your FireWire drive:1. Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
    2. If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article. This worked under Panther and may also work in certain situations under Tiger.
    3. Power-on the FireWire drive before starting up (booting) your Mac.
    4. Reset PRAM and NVRAM.
    5. Resett the power-management chip in your Mac.
    6. Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
    7. Micromat TechTool Pro version 4 can test the FireWire bus in your computer: this tests the bus — not the ports — but if the problem is on the FireWire bus on the logic board, it should reveal it.
    8. Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.
    9. Hopefully, the partition map on the FireWire drive is not damaged. This can happen if the FireWire drive was not Ejected before being disconnected or powered off. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Different MOH for Internal and External Calls

    Is it possible to have a different MOH source for internal vs external calls.
    I know that Network MOH is for transfering but can this be used for external MOH source from the PSTN?

    There's really no way to do this easily. The issue is that the call to a PSTN phone would flow through a gateway and if an IP phone put this call on hold, then the Audio Source configured on the IP phone would determine the MoH file/source and the MRGL of the gateway would determine which MoH server it actually came from. As a result, there's really no way that the IP phone placing the call on hold could specify a different audio source for an internal call (to another IP phone) because even if the other phone has a different MRGL (and therefore a different MoH server), the MoH audio source will be the same

  • Linksys SPA3102 "flashing" and incoming call problem.

    I tried to do as much research as I could before posting, however i'm stuck =/.
    My Setup:
    Phone Port on wall Split into three phone ports, one with a fax in it, one with a splitter, one empty.
    From the splitter I have a line into a D-link modem and a line into the back of the SPA3102.
    From the D-Link modem i have an ethernet cable plugged into the SPA3102 [im not using the inbuilt modem, should i be ?]
    Also from the D-link modem i have a D-link wireless router.
    Then I have a line into a set of Telstra V900 cordless phones from the SPA3102.
    I also have another phone connected directly to the PSTN line in another room.
    The problem is when a call is coming in on the PSTN line the phone connected directly to the PSTN line rings however the phones connected to through the SPA3102 don't register the call until much after the PSTN phone does. I'm not sure how to go about fixing that.
    Also should I pick up on the wired PSTN handset, how do I go about switching to the wireless handset. "flashing" i think it's called. 
     NOTE: I'm in the market for new wireless phones anyway as the telstra V900 ones are crap, any recmomendations ?
    Any help would be appreciated. 

    First I didn’t understand what you meant for “I’m not using the inbuilt modem” for the SPA-3102. Did you mean you set the SPA-3102 as a bridged? 
    If you are using a phone splitter where one of the 3 phone ports is connected to the PSTN portion of the SPA-3102 and the other phone splitter port is into another phone and someone calls the PSTN line, the phone connected to the splitter will really ring for it gets a share of the signal coming from the splitter. The phone connected to the phone port (FXS) port for the SPA-3102 will ring only if the PSTN signal has successfully transferred the call to the from the PSTN line registration to the actual Line 1 registration. If that is not happening, there are some registration settings you need to check in the SPA-3102. One important parameter is the registration status of the Line 1 and PSTN lines. You can check that under the Info section just make sure you are login as admin advanced login with the SPA-3102. You should be getting registration state “registered” confirming that the VoIP information you set in the SPA-3102 is valid. If registrations are correct, maybe you need to know is the PSTN Line is transferring the call to the VoIP line section. Setting up this portion is discussed in this link: 
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5159&p_created=11686... 
    Hope this helps.

  • Mms and receiving calls problem

    Hi,,
    I'm facing 2 problem with my new iphone 3Gs
    the first one is about the mms,, when i send anything it always failed
    i don't know if my settings is right or not,,
    the second one is since yesterday anyone try to call me they have the message that my phone is off :S and even if they send me sms i don't receive it,, only if i make a call i receive the sms and the calls.
    i don't know what happened
    by the way I'm from BAHRAIN and I'm using BATELCO network..
    plz help me as soon as u can..
    thank you.

    Have u tried the method of enabling the 3G mobile data? Because it was immediately worked for me!!
    I no need to reboot my phone after enabled it & just off the 3G mobile data back to previous condition immediately after I on the mobile data. It also worked!!
    Or try to delete your firmware first, then download the latest firmware & restore it. But always remember to backup your phone data using iCloud & your computer before update ur firmware. Anyway u can refer to other discussion to do it as below:
    my iphone 4 have signal but won't make/received call and text
    Or else, we have to wait for the releasing of IOS 5.1 which should be released recently (Hopefully!!). But not sure can solve our problems or not??!!
    Kindly update us your situation. Thanks!!

  • SchedulerTask and external webservice problems

    Hi,
    I need to build an application that fetches some report from an external webservice (Axis) on the net and stores some data in a portal database.
    However, I picked the KM-residing SchedulerTask to solve this issue because you can run it just like cron-jobs and the like.
    In my SchedulerTasks code - it has been tested standalone and does a great job fetching data from webservice - the calls fails due to a "connection refused", see stacktrace way below.
    My portal is a development machine and is therefore talking to and with everyone, fully open, un-proxied and should not hinder me from accessing such a webservice, I think.
    I checked the webservice URL (wsdl-ended) is accessible from within my SchedulerTask by opening a simple java.net.URL on it which worked really nice.
    My questions are:
    - Did someone experience a similar behaviour and if so how did you solve this?
    - Is there any additional configuration needed to make portal/KM speak with external webservices?
    - Any other thoughts?
    Thanks for your help!
    regards,
    Christian
    The essential lines from the stacktrace:
    {0}#1#AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.net.ConnectException: Connection refused
    faultActor:
    faultNode:
    faultDetail:
            {http://xml.apache.org/axis/}stackTrace:java.net.ConnectException: Connection refused
            at java.net.PlainSocketImpl.socketConnect(Native Method)
            at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
            at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
            at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
            at java.net.Socket.connect(Socket.java:461)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

    For iSight help, consider http://support.apple.com/kb/HT2090
    In addition to testing with iMovie, you can also test video recording with QuickTime Pro if you have it.
    Because you have similar problems with Photo Booth when using another camera, you may be rushing Photo Booth. Consider the suggestions offered here:
      http://discussions.apple.com/thread.jspa?messageID=7018319&#7018319
    If apps other than Photo Booth record properly but you do not want to use one of those that work properly, it is possible that a corrupted Photo Booth Preferences file is causing your problem. Quit Photo Booth (and all other applications) and throw away the Photo Booth Preferences file (com.apple.photobooth.plist) from your Home / Library / Preferences folder. A new preferences folder will be generated when you restart Photo Booth to test whether it works now.
    If resetting preferences did not help but you still want to use Photo Booth, reinstalling the Photo Booth app might help.
    If no app works properly, see your Apple Authorized Service Provider for professional help.
    EZ Jim
    G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

  • I need help with this Time Capsule and External HD problem!

    my time capsule is working perfectly and i decided to hook up a seagate 500 external hd thru the usb on the back of the time capsule!
    well i can see both drives on my macbook and i can transfer files from my mac to both hd with a breeze
    one major problem i cannot extract files from my external hd only put files in! i tried checking the setting and everything but with no avail! anyone have this problem and how did they fix it? thank you!
    Message was edited by: aphextwin007

    Try connecting another USB storage device to the TC - HDD or memory stick. Format the device while it's connected to the TC, then try writing and reading to it.
    It does seem very odd that you can write to the HDD but not read from it. Presumably when you copy files to it they appear in Finder - you can see them OK? Do they appear to be the right size ("get info", or click in "columns" view). What exactly happens if you try to drag them back to the desktop?
    I can only think that you may have a hardware or formatting problem, hence trying a different, freshly formatted, drive.

  • T60p, Vista and External Displays Problem

    I have a T60p with the ATI video running Vista that in the office gets dropped on a docking station and has 2 displays conncted to it, one through the DVI connection and one through the analog connection.  If I start the machine with it on the docking station it uses the DVI display as the primary and the VGA/analog one as the secondary.  That is fine.
    When I leave the office I use it as a laptop or sometimes at home I'll drop it on another docking station that doesn't have anything but a network connection and sometimes an external drive connected to it, and then RDP to it from one of my home machines.  When I come back to the office the display setup is always confused.  
    Usually it will reverse the 2 displays making the analog one the primary (this is very annoying), but sometimes it will only display to one of the external displays and sometimes it will just display to the built in display and to neither external display even though the thing is in the docking station and the lid closed.  Nothing seems to fix this when it happens... I can go to the display adaptor settings or the ATI control pannel and swap the display positions, but it still treats the analog as the primary (start menu, taskbar...) which I don't want, and if I reboot it it will go back to using the DVI as primary no matter what I leave the display settings at.
    Any ideas how to get it to do the same thing every time it's on the docking station in my office?  (I don't care what it does on the docking station at home, I if it's on that docking station it only gets RDP'ed into)

    Thinking out loud... is it possible it's the docking station?  One of my guys here at work has done a little research about similar problems one of our users is having and there appeares to be some evidence that swapping docking stations might fix it.

  • IPod 4 touch and external gps problem

    Hello.
    iPod 4 touch with iOS 6.1.3 is connected to Pioneer AppRadio2. Everything works great only the external gps. The problem has started when the iPod has
    been updated to 6.1.3. I've tried restart and reset device, changed privacy and location settings, changed time settings, but nothing helped. The problem is still
    here and navigation is now useless.

    Have you tried the standard fixes
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the GPS/Pioneer unit
    - Go to the unit's support site
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    Could be the IOS update broke compatibility
    after updating to iOS 6 gps signals are...: Apple Support Communities
    TS1702 magellan External gps not...: Apple Support Communities

  • H87M-P33 and external controller problem

    I have MB MSI H87M-P33. I installed external PCI-E 1x SATA RAID controller (LSI) 3Ware 9650SE-2LP (controller firmware v4.10.00.027). When I power-up PC, controller initialization goes normal and system booting up. If I do software restart or reset by reset button, controller disappears. In BIOS boot list disappears to. I do power-off and when power-on, controller initialization goes normal, system boot. On other MB this problem not appear. Controller firmware is latest. BIOS version of MB MSI H87M-P33 latest v2.2 and was flashed to v2.3b3 problem still present.
    How to resolve this problem? New bios version with correction?

    FPT will fully erase the previous bios and ME extension then re-write. It is worth trying to re-flash it via FPT as that has been found to fix some issues. (remnants of old bios etc causing issues)
    I was suggesting to test with a single stick of ram in the primary DIMM.
    Most likely you will need to report this to MSI / LSI, but it is worth a shot.
    >>How to contact MSI.<<

  • T60 2007-FUG ATI X1400 Windows 7 64-bit projector and external display problem

    I have Windows 7 64-bit Enterprise on my T60. I have tried to install many different ati drivers, but nothing seems to work. I cant use a projector or external display via VGA port. I heard that if I boot with a projector then it works ok.
    I have installed Ati Install Manager and so on. I have uninstalled drivers etc. I have search forums. I installed all updates from Lenovo site. BIOS is up to date. I installed X1400 driver from Windows update site. Driver date is 1.12.2008. I cant update it. Everything else works super.
    What to do?

    Looking at the ATI drivers on the T60 support site, I do not see one that supports Win7....don't know if there is a plan to.
    You probably have basic functionality with the Vista driver, but I would not imagine that all options will be available.
    If you cannot get the external VGA port to work through the Catalyst Control Center, then I would would chalk it up to a lack of Win7 support.
    Regards

  • Internal and external domain problem

    Host: oserver. sbsrv. local (internal address)
    Version: 10.1.2.0.2
    Installation Type: Portal and Wireless
    I have installed the oracle portal and works well in the internal network.
    The problem:
    When I try to access from public domain (www.mycompany.com) i get the welcome page from application server (fine) ,but if I press the link (log on to Oracle Application Server Portal) it redirects me to the internal address (http://oserver.sbsrv.local/portal/page?_pageid=0,1&_dad=portal&_schema=PORTAL)
    I edit httpd.conf (Apache) and i change the line from ServerName oserver.sbsrv.local to ServerName www.mycompany.com and i get something like, that : ??????: ??? ???? ?????? ? ???? ????????????? ??????? ??? ?? ???? ??????
    Question:
    How can I map the internal domain: oserver. sbsrv. local (IP 192.168. xx. xx) with public domain www. mycompany. com (IP 62. x. x. x) ?
    thanks.
    Message was edited by:
    user543368

    I did this 3 or 4 years ago and set up the Web-Cache to act as a reverse proxy. There is a paper on Metalink that explains how to set it up but I do not have the Doc ID.
    Also check out the White Paper that illustrates a different method. "Expose your Intranet Portal to the
    Outside World in a Secured Manner
    (aka. A Secured Inside/Outside Portal)" see http://www.oracle.com/technology/products/ias/portal/pdf/admin_security_1014_secured_inside_outside.pdf
    BG...

  • Differentiate ring tone for internal/external call

    how to differentiate ring tone for internal call and external call?
    rgds,
    walad.

    Floyd,
    Those parameters were changed in 4.1 CCM. I don't believe they are going to affect Ring Type but could effect CFNA or CFB settings.
    ?Use the Call Classification field in the Cisco CallManager Administration Gateway Configuration window to configure H.323 and MGCP gateways with the option for OffNet, OnNet, or Use System Default.
    ?The default value for H.323 and MCGP gateways specifies OffNet.
    ?The default value for intercluster trunks (ICT), or trunks other than SIP trunks, specifies OnNet.
    ?In Cisco CallManager release 4.1, Call Classification replaces the H323 Network Location, MGCP Network Location, and MGCP Network Location OffNet for E1 and T1 service parameters.
    ?To configure trunks and gateways, the administrator can use the Call Classification clusterwide service parameter and choose the Use System Default option for the individual trunks and gateways.
    ?By default, the service parameter specifies OffNet.
    ?You can also configure trunks and gateways individually.
    ?The system considers FXS and phones to be OnNet; you cannot configure them.
    The only way that I know of to achieve what you want is dual-line. Ring settings can be set per line or a default for the phone. You could use a unique inbound Gateway CSS with a 2nd line on the phones just for inbound calling. Then you can specify the ring on the phone to be different for the second line.
    There is nothing in 4.1 and below (again to my knowledge) that will allow for distinctive ring per call. You should double-check the 4.2 and 5.x release notes to make sure there isn't a new feature though.
    Please rate any helpful posts
    Thanks
    Fred

  • CUCM 8.6(2) migration problem with external calls

    Hello all.
    Yesterday we have migrated our telephone infrastructure from CM4.x to CUCM8.6(2), after some weeks of tests.
    Yesterday night all seems to work properly, all phone updated and registered, external calls going out and in.
    But from this morning, with all users at work, it appears a strange problem, that until now I couldn't solve: randomly all external calls go down.
    I can't address this problem, since gateways (all cisco 2811 routers) are the same and with same configuration as yesterday.
    All thing that I can think is that router that seems to cause the problem is configured not with mgcp by cucm, but with h323 route inside the router.
    Any suggestions will be greatly appreciated.
    Daniele

    GW says normal call clearing.
    But, maybe I've addressed the problem.
    I've found a bug fixed into latest cucm release (8.6(2a)SU1) that say "h.323 calls improperly disconnected".
    So I'm trying to upgrade from 8.6(2a) to 8.6(2a)SU1, but process fails :-(
    I've tried from a dvd and also loading iso image from sftp, but after few minutes appears an error
    08/04/2012 09:43:55 upgrade_install.sh|Started auditd...|
    08/04/2012 09:43:56 upgrade_install.sh|Started setroubleshoot...|
    08/04/2012 09:43:56 upgrade_install.sh|Changed selinux mode to enforcing|
    08/04/2012 09:43:56 upgrade_install.sh|Cleaning up rpm_archive...|
    08/04/2012 09:43:56 upgrade_install.sh|Removing /common/rpm-archive/8.6.2.21900-5|
    08/04/2012 09:43:56 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|
    08/04/2012 09:43:56 upgrade_install.sh|set_upgrade_result: set to 1|
    08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|
    08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 1286).|
    08/04/2012 09:43:56 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 1286)|
    I've rebooted server yet and problem remains.
    Thanks for any other suggestions.
    Daniele

Maybe you are looking for