Jtapi - file playing problem

Hi all,
I am a Software Engineer, and programming in java since 2002. But now first time, I am working on a telephony application using JTAPI.
I have a dialogic card (D/41-ESC) to play with.
My code is working fine, it is dialing out, receiving calls, recording users voice and receiving DTMF input. All state and events are also according to documentations.
But i am facing problem at palying of sound (wav/au) file from application to telephone. No exception occurs during execution.
Please guide me what may be the problem.
(FYI. I have no sound card on my system)
looking for early reply. thanks in advance

Hi,
I need a help to make use of TTS in JTAPI 1.4 version. As there is no sample program for this JTAPI 1.4 package, am facing an issue to write a program to play a wave file. Am using Freetts to convert the text file into wave file with 8000 hz frequency. But to play till now I've used usePlayURL method to play the file. But the voice is not clear & soft. So our team preferred to choose a better voice using some other TTS engine & also make a try of TTS in JTAPI 1.4. But the existing source files are just a body for all each interfaces in that package. Don't know to make use of the interface methods.
Kindly guide me to proceed my task.
Welcoming the suggestions....
Thanks & Regards,
GrasyX

Similar Messages

Jtapi - file palying problem

Hi all,
I am a Software Engineer, and programming in java since 2002. But now first time, I am working on a telephony application using JTAPI.
I have a dialogic card (D/41-ESC) to play with.
My code is working fine, it is dialing out, receiving calls, recording users voice and receiving DTMF input. All state and events are also according to documentations.
But i am facing problem at palying of sound (wav/au) file from application to telephone. No exception occurs during execution.
Please guide me what may be the problem.
(FYI. I have no sound card on my system)
looking for early reply. thanks in advance

Hi,
I need a help to make use of TTS in JTAPI 1.4 version. As there is no sample program for this JTAPI 1.4 package, am facing an issue to write a program to play a wave file. Am using Freetts to convert the text file into wave file with 8000 hz frequency. But to play till now I've used usePlayURL method to play the file. But the voice is not clear & soft. So our team preferred to choose a better voice using some other TTS engine & also make a try of TTS in JTAPI 1.4. But the existing source files are just a body for all each interfaces in that package. Don't know to make use of the interface methods.
Kindly guide me to proceed my task.
Welcoming the suggestions....
Thanks & Regards,
GrasyX

DVD files playing problem

hi... i have a K8T Neo@ F/FIR board wid 1.8 3000+ series amd processor. 512 RAM and Radeon 7200 Graphic card
now the problem that i am facing is that when even i m watchin a dvd movie on my computer, after i m done wid da movie and i cross the software to close it, my system halts after 3 seconds.
not only a dvd but even if i have a dvd .vob file in my hard drive and i play it from there, and when i close the software, the system halts. i have changed my 3d card but the problem is still ther. have used many dvd playing softwares, like VLC, power dvd, windvd and intervideo. but all have the same problem.
the system halts some 3-5 seconds after i exit the software or stop the movie playing.
please give me some solution...
waiting..
thanx

>>Posting Guide<<

Quicktime 7.x.x Chinese Big-5 lyrics kar file play problem.

I use Quicktime to play *.kar file in my blog as following link.
http://itw.idv.tw/blog/?p=2656
CDEFGABCDCBAGFEDC, means Do Re Mi Fa Sol La Si Do Re Do Si La So Fa Mi Re Do.
English lyrics has no problem at Quicktime 7.x.x and 6.4, C, D, E, F, G, A, B, C D C B A G F E D C triggered one-by-one.
Chinese Big-5 lyrics has severe problem at Quicktime 7.x.x, C, DE, F, GA, B, CD, C, BA, G, FE, D, C.
Any idea?

sometimes Unicode processing of text may wrongly convert a character which is originally only 1 byte wide to a full 3-byte wide Unicode character. This may be the source of this bug.
有时候将非Unicode字符转换为Unicode字符可能会错误地将原本只有一个字节宽的字符转换成一个完整的三字节Unicode字符，这可能就是问题的起因。

Swf file playing problem in limited user in XP

hi all,
can anyone help me how to fix this roblem?.... when i try to
open any web site which has swf content in my limited user account
(XP os) it is not playing! and when i change my user to
administrator it is playing properly... pls help me....
-oviam.

Hi AxshunJaxun. Have done a bit more testing & web searching and found that I can rename My Documents but not Application Data. Looks like Application Data has some sort of special status in XP and it's the opsys doing the renaming of both copy & source. Since I can keep multiple copies of My Documents and can live with having to make multiple copies of individual Apps. under Application Data I'll go with that. Thanks for your help.

HP G56 intermittent sound problem - e.g you tube/MP3 files play for 10 seconds then stop.

HP G56 intermittent sound problem - e.g you tube/MP3 files play for 10 seconds then stop. I have made sure that the latest sound driver is installed and this makes no difference. The laptop is new so there is no other software on it other than the pre-installed stuff operating on windows 7. In sound options all looks well and the device is said to be working properly. Even the sound test in device manager sometimes works and sometimes doesnt.

karl6792 wrote:
HP G56 intermittent sound problem - e.g you tube/MP3 files play for 10 seconds then stop. I have made sure that the latest sound driver is installed and this makes no difference. The laptop is new so there is no other software on it other than the pre-installed stuff operating on windows 7. In sound options all looks well and the device is said to be working properly. Even the sound test in device manager sometimes works and sometimes doesnt.

One mov file plays in Media Viewer on Ext Hd Drv, imported into FCPX it plays 5 sec then goes black. No problem with other mov files.

One mov file plays in Windows Media Viewer in Ext Hd Drv. Imported as Proxy Media into FCPX it plays in both Event and Time Line for 5 seconds, then goes black. No problem with many other mov files in same project. Tried converting this one file into MP4, but produced only pixellated jumble.

Can you open the clip in the QuickTime player? What are the specs shown in the inspector?

[SOLVED] unable to play mp3 or flac files in mpd, .dts files play fine

I had a perfect running mpd setup before I tried to fiddle around with some dependancies to get xbmc-svn to compile without errors. I installed some AUR packages (ffmpeg-svn, x264-git, libva-sds, libvpx, libid3tag).
After that I started to experience trouble with mpd, it start fine and says it plays audio files just fine but whenever i play a mp3 or flac file the progress bar just looks like it's playing the file but I hear no sound. Whenever I play a .dts file i hear the sound correct.
I'm very curious to why this happends.
I rolled back the packages mentioned above but the issue remains unsolved.
My setup: pc is connected to receiver by hdmi cable using the latest alsa version with digital passthrough over hdmi, currently using mpd-git from AUR
mpd -v --no-daemon shows the following:
# mpd -v --no-daemon /etc/mpd.conf
config: loading file /etc/mpd.conf
listen: binding to address for 192.168.1.3
listen: binding to socket address 192.168.1.3:6600
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: writing pid file
snippet from mpd.log:
Jun 28 00:54 : client: [0] process command "playlistfind filename "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "addid "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : add to playlist: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : database: get song: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "playid "7""
Jun 28 00:54 : playlist: play 7:"Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3"
Jun 28 00:54 : decoder_thread: clearing mixramp tags
Jun 28 00:54 : decoder_control: mixramp_start = NULL
Jun 28 00:54 : decoder_control: mixramp_prev_end = NULL
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "status"
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "idle"
Jun 28 00:54 : client: [0] command returned 1
Jun 28 00:54 : client: [0] process command "playlistid "7""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : mad: detected LAME version 3.97 ("LAME3.97 ")
Jun 28 00:54 : mad: LAME peak found: 0.000000
Jun 28 00:54 : mad: LAME track gain found: -5.000000
Jun 28 00:54 : mad: encoder delay is 576, encoder padding is 1818
Jun 28 00:54 : decoder: audio_format=44100:24:2, seekable=true
Jun 28 00:54 : alsa: default period_time = buffer_time/4 = 185759/4 = 46439
Jun 28 00:54 : client: [0] process command "plchangesposid "2""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : alsa: buffer_size=8192 period_size=2048
Jun 28 00:54 : output: opened plugin=alsa name="My ALSA Device" audio_format=44100:32:2
Jun 28 00:54 : output: converting from 44100:24:2
Jun 28 00:54 : Failed to open mixer for 'My ALSA Device': no such mixer control: PCM
mpd.conf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/media/media9/Muziek/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "mpd"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "192.168.1.3"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "verbose"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# #music_directory "path_to_your_music_collection"
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured #music_directory "path_to_your_music_collection"
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured #music_directory "path_to_your_music_collection"
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,3" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "Master" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
Whenever I run xbmc using the hdmi digital output it just plays mp3 and flac files without problems.
Anyone any clues on how to solve this issue?
TIA, dafart
Since
Last edited by dafart (2010-07-01 00:38:09)

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Which correspondents fine with the
device "hw:0,3"
in my mpd.conf alsa section.
Also sound worked fine withh this config before I started installing ffmpeg-svn and alikes
hokasch:
I tried changing the mixer to "Master" but that did not change much.

Html files play in main stage of flash

How can macromedia flash play html files?
I have a problem my friends! First of all I should say that I
know flash is not a browser!!! I have lots of internal and external
html files next to my main swf movie and I made lots of botton for
each html files and a window next to the bottons on the left side
of my stage now the question is: how can I tell macromedia flash by
pressing each botton its especial html file play in the left
window?(and not anywhere else) I tried "get url" but html files now
are playing in a browser and not in my window!!
Maybe I made the window in the wrong way so how can I create
this window for html files?
I am not a professional user of macromedia flash –
thank you for your coaporation
In the following path you can find an example this is where I
installed my flash
C:\Program Files\Macromedia\Flash 8\Samples and
Tutorials\Samples\Text\ TextEnhancements
Here is a link that maybe show my question better
Its just 120 kb
http://scorpionsofhack.googlepages.com/html.zip

Set the sample rate higher in MainStage and you'll get lower latency.

*.mov files play on ipad without audio

I have recently transferred some *.mov files from my PC to iPad. These files play perfectly well on PC in both Quicktime Player and Windows Media Player. However, when I try to play them on iPad, I get video only (no sound). I have latest versions of all softwares so cannot figure out why iPad is not playing audio of only these files. I had some old *.mov files on my iPad which play perfectly well (both video and audio) so how can I fix this problem.

I had some WMV files which I had converted to *.MOV using AVS Video Converter. I have compared the properties of old *.MOV files which play on iPad perfectly well (using QuickTime Player) with the properties of the newly-transferred files and they are exactly the same in every aspect. Is it possible that because of low memory (about 4GB) left on iPad after the new files' transfer, the audio is not playing on iPad?

Sonata Library Files Playing only internet connection time

Hi everyone.
My Problem ; Sonata Library Files Playing only internet connection time.When Internet connection not available sonata not playing my library files.
Thank you for helping.
MPD Conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "~/music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/Playlist"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "~/.mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "~/.mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "~/.mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "ceyhan"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
## device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "MASTER" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
Last edited by SYSTEMEDIC (2010-07-10 06:36:03)

What is dropping I guess is the question? Is it wireless? Is it your WAN connection? You need to identify where the problem is.
To do that you need to try a few things.
1. If you use wireless then bypass it and use ethernet if that is possible.. even just drag things around so you can test if ethernet fixes it. If so and wireless is in fact the problem.. then you can do a few things.
2. Wireless issues with the 7.6.4 firmware are common. Did you upgrade about the time the problems started? I am afraid the bad news is, downgrading is not like in the past where it fixed things.. 7.6.4 seems to have some permanent effect on the TC and it is never quite the same again. How this is even possible I have yet to determine.
The usual fix is factory reset.
Set wireless with short names, no spaces and pure alphanumeric. Different name for 5ghz.
Make sure security is WPA Personal with pure alphanumeric password of 8-20 characters.. unless you are more paranoid.
Fix the wireless channels and test in order. 11, 8, 6, 1
And for 5ghz try the lowest channel, 36 and then a high one, around 150.
3. No improvement factory reset again.. downgrade to 7.6.1 or even 7.5.2 if it is an older Gen4 .. at 18months it might be old enough.. no harm trying. Factory reset again after the downgrade to see if we can get rid of the memory effect.. then try the above steps again.
No luck.. whatever the upgrade did it did permanently.. no fix is available until Apple pushes out a new firmware to fix what they did in the last one. Buy a different wireless router for now and use the TC in bridge just for TM backups.

Video playing problem

I m experiencing serious video playing problem unable to play avi files of size 150mb above as i have downloaded titanic n was unable to play it!!!!! Pls look in the matter

hi mate, what device are you using, and what have you encoded the bitrate and audio codec of the video?

How do I make 1 video file play alone or as part of a sequence of videos

how do I make 1 video file play alone or as part of a sequence of videos and only have it on the disc once.
My problem is that I am short of space on my disc due to the amount of content, and all of the files appear separately on the menu to play invividualy, but i would like to have a play all function aswell without putting the files on the disc twicew. Am I being an idiot? Is this easy to solve?

Take a look at "stories" in the manual.

CS4 premiere Imported .avi files play too fast

Hi Guys
I have a problem. I'm new to CS4 having used Adobe Premiere 6.0 in the past and I have never had this issue when importing .AVI files. What happens is that the file play fine in my windows enviroment and on all my players VLC,DIVX, Windows media player.
But as soon as I import these files into my project at 29.97 frames the video plays really really fast and the sound plays at the normal rate. If I try to change the frame rate the sound also changes. Now here is the strange part. If I convert the files to MP4 they play fine! but the quailty of the video takes a massive hit as you know.
I tried to convert the files to .MOV, MPG (which the program won't play) and most other types of video files but MP4 seems to be the only one that works! When I really want the higher quailty .AVI. Again the files play fine outside of CS4 Premiere and I have already converted them from a Panasonic AVCHD encode format.
Please if anyone has any advise it would be great as I have to get this sorted for a x-mas present!
Richard
Running
Windows Vista Ulimate
4GB RAM
Quad core Intel chip
CS4 version 4.1.0

First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of that link
PS you are in the wrong forum http://forums.adobe.com/community/premiere/premierepro_current

Audio not in synch with video when mov files played in QT 7.6

When I play .mov files stored in an iPhoto 08 photo library, the audio is not in synch with the video. People's lips move and the audio comes out a second or so later. This is a relatively new problem, and I don't have the same problem when I play .avi files. A couple weeks ago, the audio and video were good and they were synchronized. The video in the .mov files is also choppy. The video plays for a few seconds, briefly pauses, and then starts again.
Appreciate any suggestions.

I'm not sure this is the issue. The video files were never in iMovie. Only imported into the iPhoto libaray from my Kodak M1033 camera. A few weeks ago, I did not have an issue with .mov files playing smoothly. Perhaps there was a recent update to QT?
When I upload the .mov clips to Flickr (www.flickr.com) or YouTube, they play just fine, so I'm not sure what the issue is.

Jtapi - file playing problem

Similar Messages

Maybe you are looking for