JTECH import fails with error Dirty DC

Hi guys,
We are on NW2004 s SP 7. I am trying to import JTECH7P and the import is failing with error dirty Dcs.
Can anyone tell me where the error is? Is it due to incompatible to JTECH patch with my NWDI and EP system.
Can some one give me matrix of which SP and patch for source codes JTECH ESS MSS BUILD JEE are required for NW2004s J2EE SP 7.
Can some one point me to a note similar to 761266. I think 761266 this note does not have NW2004s related etails
appreciate any help.
regards
Sam

Ufuk Altinkaynak schrieb:
> Dave Parkes schrieb:
>> Stored in an external storage area, or under the post office ?
>>
>
> Hello Dave,
>
> when using post office storage error is C06A, when using an external
> storage, the error is C06B.
>
> If you have any hints/ solution or can say something about the charge,
> that would be a huge help
>
Updated Information,
Just to be sure about the C06B error, i created an new Library with
external storage, than i draged and droped an *.txt file into documents
(no the funny part) imported without any erors into the default library
(that one with post office storage, that had before C06A errors)
No i can use the library (with postoffice storage) without any erros.
The only change on that system, was to create an additional library with
external storage
As every good side has a bad side, this bad side is, that i cannot
import any documents into the library with external storage, the error i
receive is C06B
I have no clue why creating an additional librarry has fixed the first
error, but hopefully this makes sence for someone, and hopefully anyone
can help on the second error / Problem:
C06B Error while importing into a library with external storrage
regards
Ufuk Altinkaynak

Similar Messages

  • Import fails with error unique constraint

    Hello,
    I try to import an APEX Application from Version 2.2 to APEX Version 2.0.
    I get the following error message:
    ORA-20001: GET_BLOCK-Fehler. ORA-20001: GET_STMT-Fehler. ORA-20001: Die Ausführung der Anweisung war nicht erfolgreich. ORA-00001: unique constraint (FLOWS_020000.WWV_FLOW_REGION_UPD_RPT_CI1) violated<pre>
    &lt;br&gt;begin&lt;br&gt; &lt;br&gt;---------------------------------------&lt;br&gt;-- ...updatable report columns for page 60&lt;br&gt;--&lt;br&gt; &lt;br&gt;begin&lt;b
    For the Import I chose the option "Auto Assign New Application ID".
    Has anyone an Idea, why the import fails?
    (Export from Version 2.2 and Import to a different Workspace in Version 2.2 is successful)
    Thank you for your responses,
    Carola

    Carola,
    I have no idea why this is happening. You may send the application export file (or the export file for page 60 only) to [email protected] and I will check it.
    Scott

  • Import failed with errors/warnings like   ORA-31684/ORA-39082

    Hello,
    While doing IMPDP actvity i am getting messages like ORA-31684: Object type PACKAGE_BODY:"APPS"."AZ_DELETE" already exists and ORA-39082: Object type PACKAGE_BODY:"APPS"."FND_DM_PRODUCTS_PKG" created with compilation warnings
    Complete Import log file, same messages were encountered like ORA-31684 and Ora-39082
    Can you please suggest.
    Thanks,
    DBA

    First of all mention your Oracle Version and Operating Systems
    ORA-39082 is a warning You can run utlrp.sql to recompile all the objects that fails and that script is present in Oracle_Home\rdbms\admin
    If these errors are less you can recompile every warning as :--
    SQL>alter package schema_name.package_name compile;

  • Tp import fails with error "data files not transferred"

    Hi colleagues,
    I am working on transport requests. I had issued out the <i>tp addtobuffer SIDKxxxx <sid>  pf=TP_DOMAIN_SID.PFL </i> command for a number of transport requests at OS level; but when i then try to do <i>tp import SIDKxxxxx <sid> client= u18 pf=TP_DOMAIN_sid.PFL</i>, i get this error: "Data files are not transfered</b>" in the QAS system. Everything works fine in PROD though. What could be the reason for this. I can't get it done within the application either.
    Your responses appreciated.

    Hi,
    I guess you have individual transport directories. I f you have configured the Transport Domain and added the Other Two into the Domain and configured the Transport Route. You should be able to see the Some RFC Destinations in SM59.
    TMSADM@<SID>.<DOMAIN NAME>
    TMSSUP@<SID>.<DOMAIN NAME>
    Please check the Test connection. of all these RFC Destination. If these fail check if you have firewall issues between the system stopping the communication on Port 33<Instance No>.
    Thanks,
    Tanuj

  • Order Import failing with error "The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory."

    Hi All,
    I am getting this error while importing an internal sales order.
    “The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory.”
    I have tried to set mentioned profile as ‘Yes’. But still getting same error.
    Also, provided subinventory is present and active in given inventory organization.
    Please share if anybody encountered this before and have a solution.

    Hi 2878342
    Please refer the following metalink note, it should resolve your problem.
    Order Import Interface.Error Message Specified Subinventory Is Invalid To Use (Doc ID 406411.1)

  • Import failing with no errors

    Import failing with no errors
    All it says in logs for each table is
    . . skipping table "<table_name>"
    It's a full import from a 10.2.03 db into a 10.2.0.3 db

    Hi,
    "INDEXFILE" , this is parameter is specified, index-creation statements for the requested mode are extracted and written to the specified file, rather than used to create indexes in the database. No database objects are imported.
    Due to that that Objects are skipping.
    The INDEXFILE parameter can be used only with the FULL=y, FROMUSER, TOUSER, or TABLES parameters.
    Else you can perform a two step process as stated by Amardeep.
    - Pavan Kumar N

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • Windows 8 backup (Win7 File Recovery system image) creation to NAS device fails with error 0x807800C5

    Hi,
    I have a ZyXEL NSA310 NAS device on my network that I use for backups (as well as a media server). I have been very happy with it as, amongst other things, it has a gigabit Ethernet connection. I recently upgraded my home laptop from Win7 Pro to Win8
    Pro. Under Win7 the NAS device worked perfectly as the backup target. I could back up file sets and - most importantly to me - create a system image on the device should I need to restore the system in the event of a full disk failure.
    When I upgraded to Win8 it kept the Win7 settings and it looked like it was just going to work, then as it came to create the system image it failed with error code 0x807800C5 and message "The version does not support this version of the file format".
    I have searched the internet and seen that others have had similar issues on Win7 and Win8 with NAS devices where they have had to hack the device to get it working - though it isn't clear that this has been successful for everyone. This isn't an option
    for me as the NSA310 is a closed device and in any event I don't see why I should have to hack the device when clearly this is a Win8 issue (since Win7 worked perfectly).
    Does anyone have any ideas how to fix this issue so that I can create the full backups I require?
    Thanks,
    Phil
    Event Log messages:
    Log Name:      Application
    Source:        Microsoft-Windows-Backup
    Date:          13/01/2013 23:14:52
    Event ID:      517
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      Home-Laptop
    Description:
    The backup operation that started at '‎2013‎-‎01‎-‎13T23:13:43.523158000Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a
    solution, and then rerun the backup operation once the issue is resolved.
    Log Name:      Application
    Source:        Windows Backup
    Date:          13/01/2013 23:14:56
    Event ID:      4104
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Home-Laptop
    Description:
    The backup was not successful. The error is: There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5).

    Thanks willis! I will look into the iSCSI route. A quick Google search and I can see some mention of the NSA310 and iSCSI so maybe it does support it.
    One question: Have you ever attempted to restore a system image from a NAS iSCSI device with a Win8 Restore Disk? Is it easy? I just want to be sure that it is possible to do so in case the worst happens and I need to restore the entire image onto a
    new disk.
    Hopefully Microsoft will fix the issue with the standard NAS setup with an update in the future, but I don't want to wait for it.
    Thanks again,
    Phil
    Hi Phil,  No I have not had to do this yet, but I see no reason why it shouldn't work as the iSCSI disk looks just like a regular hard disk to the OS. I agree that Microsoft should fix the direct NAS support as the iSCSI approach does have the downside
    of dedicating a fixed chunk of your NAS drive to the iSCSI disk that you have to choose when you create the disk whereas the direct NAS just uses the actual space currently needed by the backup. Also I had some trouble getting authentication (access rights)
    to work so I left the iSCSI portal as open access - which is OK for a home solution but not a good idea in general. I will revisit this for my own setup and see if I can get it working but just wanted to mention it in case you have the same issue. It manifests
    itself as not being able to connect to the iSCSI portal due to failed authentication when running iSCSI initiator setup.
    -willis

  • Open Item Import fails with a process_flag = -999 or -888

    Problem description
    ============
    The Open Item Import fails with a process_flag = -999 in
    mtl_system_items_interface. This keeps the item from being imported into
    mtl_system_items. The process_flag has to be set back to 1 to have the row(s)
    reprocessed.
    Solution
    ======
    UPDATE mtl_system_items_interface
    set transaction_type='CREATE'
    where transaction_type=<'>
    Commit;
    Re run the Item Import it should go fine.
    Regards,
    Mehboob

    Hi,
    It looks like you have posted the same in below thread.
    Item Import completed with Process_Flag = 31, 41 and 42
    Any way if you have problem you can refer to below metalink notes.
    NOTE:103869.1 - Item Attribute vs Template Attributes Using IOI
    NOTE:106812.1 - Instructions for Running Item Open Import (IOI) Including Historical Revision Da
    NOTE:109628.1 - FAQ for Item Import
    NOTE:268968.1 - Understanding Item Import and Debugging Problems with Item Import
    NOTE:458544.1 - Inventory Item Open Interface ITAR Template
    NOTE:52746.1 - A Guideline to IOI Error Messages and Solutions
    Thanks
    Vishalaksha

  • Req import fails with POCIRM-24a: ORA-01400:

    Req import fails with.
    POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."D

    Please post the details of the application release, database version and OS.
    Req import fails with.
    POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."DPlease follow the steps in these docs for details about the error.
    Adding To Cart Delivers Error - ORA-01400: Cannot Insert NULL Into ("PO"."PO_REQUISITION_LINES_ALL"."DELIVER_TO_LOCATION_ID") [ID 580002.1]
    FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]
    Thanks,
    Hussein

  • Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

    I have a SSIS project that I am newly running on the SQL server (2005) .  It was previously run on my PC.  I am importing data from a DB2 server to the SQL server.
    I am in the SA group on the server
    My connection to DB2 works
    When open the package and run it in preview mode, I can retrieve the data.
    When I execute the package I get the below errors:
    [MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
    What I have already done that has not worked:
    The original Protection level was set to EncryptSensitiveWithPassword. 
    I have reset the Package Password.
    I have set the protection level to DontSaveSensitive
    I saved the package on the server and set a Package Password.
    I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
    Error continues

    Yes.  The Drivers are installed and I have a successfull connection.  I am trouble shooting the issue on the server in BIDS.  I can connect to the DB2 server via the Connectionmanager.  I can also preview the data in the OLE
    DB source connection.  Therefore I know that I have a proper connection
    If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
    will enable you to change connection info at runtime.
    If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Preverification failed with error code 1. BUILD FAILED

    Hallo Oracle,
    Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
    Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
    Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
    Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
    Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
    Error preverifying class com.sun.activation.registries.MailcapFile
        VERIFIER ERROR com/sun/activation/registries/MailcapFile
    .<init>(Ljava/lang/String;)V:
    Cannot find class java/util/Map
    C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
    BUILD FAILED (total time: 25 seconds)
    this is the contents of build-impx.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
    <project name="watsdownapp-impl" default="jar" basedir="..">
        <!--load-properties-->
        <target name="pre-load-properties">
            <property file="nbproject/private/private.properties"/>
            <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
            <available property="user.properties.file.exists" file="${user.properties.file}"/>
        </target>
        <target name="exists.config.active" unless="config.active">
            <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
            <property value="" name="config.active"/>
        </target>
        <target name="exists.netbeans.user" unless="netbeans.user">
            <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
        </target>
        <target name="exists.user.properties.file" unless="user.properties.file.exists">
            <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
        </target>
        <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
            <loadproperties srcfile="nbproject/project.properties">
                <filterchain>
                    <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                    <concatfilter prepend="nbproject/project.properties"/>
                    <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
                </filterchain>
            </loadproperties>
            <property name="deployment.instance" value="default"/>
            <loadproperties srcfile="${user.properties.file}">
                <filterchain>
                    <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
                    <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
                    <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
                </filterchain>
            </loadproperties>
            <loadproperties srcfile="nbproject/project.properties">
                <filterchain>
                    <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                    <concatfilter prepend="nbproject/project.properties"/>
                </filterchain>
            </loadproperties>
        </target>
        <!--basic-init-->
        <target name="exists.platform.active" unless="platform.active">
            <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
        </target>
        <target name="exists.platform.configuration" unless="platform.configuration">
            <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
            <property name="platform.configuration" value="CLDC-1.0"/>
        </target>
        <target name="exists.platform.profile" unless="platform.profile">
            <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
            <property name="platform.profile" value="MIDP-1.0"/>
        </target>
        <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
            <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
            <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
            <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
            <fail unless="src.dir">Must set src.dir</fail>
            <fail unless="build.dir">Must set build.dir</fail>
            <fail unless="dist.dir">Must set dist.dir</fail>
            <fail unless="dist.jar">Must set dist.jar</fail>
            <property name="javac.source" value="1.3"/>
            <property name="javac.target" value="1.1"/>
            <property name="javac.encoding" value="${file.encoding}"/>
            <property name="deployment.number" value="0.0.1"/>
            <property name="deployment.counter" value="000002"/>
            <condition property="no.deps">
                <istrue value="${no.dependencies}"/>
            </condition>
            <condition property="no.preprocess">
                <isfalse value="${use.preprocessor}"/>
            </condition>
            <condition property="no.javadoc.preview">
                <isfalse value="${javadoc.preview}"/>
            </condition>
            <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
                <istrue value="${filter.exclude.tests}"/>
            </condition>
            <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
            <condition property="deployment.do.override.jarurl" value="">
                <istrue value="${deployment.override.jarurl}"/>
            </condition>
            <condition property="config.active.name" value="DefaultConfiguration">
                <length string="${config.active}" trim="true" length="0"/>
            </condition>
            <property name="config.active.name" value="${config.active}"/>
            <taskdef resource="org/netbeans/mobility/antext/defs.properties">
                <classpath>
                    <pathelement path="${libs.j2me_ant_ext.classpath}"/>
                </classpath>
            </taskdef>
            <condition property="skip.deployment">
                <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
            </condition>
            <condition property="app-version.autoincrement.trigger">
                <istrue value="${app-version.autoincrement}"/>
            </condition>
            <condition property="debug.timeout" value="30000">
                <or>
                    <equals arg1="${debugger.timeout}" arg2="" trim="true"/>
                    <not>
                        <isset property="debugger.timeout"/>
                    </not>
                </or>
            </condition>
            <property name="debug.timeout" value="${debugger.timeout}"/>
            <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
        </target>
        <!--cldc-init-->
        <target name="cldc-pre-init">
            <condition property="cldc-platform.trigger">
                <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
            </condition>
        </target>
        <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
            <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
            <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
            <property name="platform.device" value=""/>
            <property name="dist.jad.url" value="file://"/>
            <property name="run.cmd.options" value=""/>
            <condition property="evaluated.run.security.domain" value="">
                <isfalse value="${run.use.security.domain}"/>
            </condition>
            <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
            <condition property="override.jarurl.trigger">
                <and>
                    <istrue value="${cldc-platform.trigger}"/>
                    <istrue value="${deployment.override.jarurl}"/>
                </and>
            </condition>
            <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
            <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="${dist.jad}"/>
                <include name="${dist.jar}"/>
            </patternset>
        </target>
        <!--cdc-init-->
        <target name="cdc-init">
            <condition property="cdc-platform.trigger">
                <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
            </condition>
            <available file="${manifest.file}" property="manifest.available"/>
            <condition property="main.class.applet">
                <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
            </condition>
            <condition property="main.class.xlet">
                <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
            </condition>
            <condition property="manifest.available+main.class+fat.jar">
                <and>
                    <isset property="manifest.available"/>
                    <isset property="main.class"/>
                    <istrue value="${platform.fat.jar}"/>
                    <not>
                        <equals arg1="${main.class}" arg2="" trim="true"/>
                    </not>
                </and>
            </condition>
            <condition property="manifest.available+main.class">
                <and>
                    <isset property="manifest.available"/>
                    <isset property="main.class"/>
                    <isfalse value="${platform.fat.jar}"/>
                    <not>
                        <equals arg1="${main.class}" arg2="" trim="true"/>
                    </not>
                </and>
            </condition>
            <condition property="application.version.invalid" value="true">
                <equals arg1="${deployment.number}" arg2="" trim="true"/>
            </condition>
            <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
            <condition property="sign.jar.trigger" value="true">
                <and>
                    <isset property="cdc-platform.trigger"/>
                    <istrue value="${sign.enabled}"/>
                </and>
            </condition>
        </target>
        <!--semc-init-->
        <target name="semc-pre-init" if="cdc-platform.trigger">
            <condition property="semc-platform.trigger">
                <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
            <condition property="semc.icon.invalid" value="true">
                <or>
                    <contains string="${semc.application.icon}" substring="$${"/>
                    <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <condition property="no.certificateorkey" value="true">
                <or>
                    <isset property="no.application.uid"/>
                    <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
                    <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
                    <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
                    <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
                </or>
            </condition>
            <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
            <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
                <classpath>
                    <pathelement path="${libs.cdc-ant-utils.classpath}"/>
                </classpath>
            </taskdef>
            <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
                <classpath>
                    <pathelement path="${libs.semc-ant-utils.classpath}"/>
                </classpath>
            </taskdef>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="*.sis"/>
                <include name="*.SIS"/>
            </patternset>
        </target>
        <!--savaje-init-->
        <target name="savaje-pre-init" if="cdc-platform.trigger">
            <condition property="savaje-platform.trigger">
                <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
            <property name="savaje.application.uid" value="TBD"/>
            <condition property="savaje.bundle.base.invalid" value="true">
                <or>
                    <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
                    <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
                </or>
            </condition>
            <condition property="savaje.unsupported.main" value="true">
                <or>
                    <equals arg1="${main.class.applet}" arg2="true"/>
                </or>
            </condition>
            <condition property="savaje.icon.invalid" value="true">
                <or>
                    <isset property="no.application.uid"/>
                    <contains string="${savaje.application.icon}" substring="$${"/>
                    <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="bundle.jnlp"/>
                <include name="bundle.policy"/>
                <include name="lib/*"/>
            </patternset>
        </target>
        <!--sjmc-init-->
        <target name="sjmc-pre-init" if="cdc-platform.trigger">
            <condition property="sjmc-platform.trigger">
                <equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
        <!--ojec-init-->
        <target name="ojec-pre-init" if="cdc-platform.trigger">
            <condition property="ojec-platform.trigger">
                <equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
        <!--cdc-hi-init-->
        <target name="cdc-hi-pre-init" if="cdc-platform.trigger">
            <condition property="cdc-hi-platform.trigger">
                <equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
        <!--nokiaS80-init-->
        <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
            <condition property="nokiaS80-platform.trigger">
                <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
            <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
            <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
            <condition property="nokia.icon.invalid">
                <or>
                    <contains string="${nokiaS80.application.icon}" substring="$${"/>
                    <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="${dist.jar}"/>
            </patternset>
        </target>
        <!--init-->
        <target name="pre-init"/>
        <target name="post-init"/>
        <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
        <!--conditional clean-->
        <target name="conditional-clean-init">
            <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
                <srcfiles dir="nbproject">
                    <include name="project.properties"/>
                    <include name="build-impl.xml"/>
                </srcfiles>
            </uptodate>
        </target>
        <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
            <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
        </target>
        <!--deps-jar-->
        <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
        <!--preprocess-->
        <target name="pre-preprocess"/>
        <target name="do-preprocess" unless="no.preprocess">
            <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
            <property name="abilities" value=""/>
            <property name="debug.level" value="debug"/>
            <mkdir dir="${preprocessed.dir}"/>
            <echo message="ignore me" file="${build.dir}/.timestamp"/>
            <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
            </nb-prep>
            <copy todir="${preprocessed.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
        </target>
        <target name="post-preprocess"/>
        <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
        <!--compile-->
        <target name="pre-compile"/>
        <target name="do-compile">
            <fail unless="build.classes.dir">Must set build.classes.dir</fail>
            <mkdir dir="${build.classes.dir}"/>
            <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
                <classpath>
                    <path path="${libs.classpath}"/>
                </classpath>
            </javac>
            <copy todir="${build.classes.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
        </target>
        <target name="extract-libs" description="Extracts all bundled libraries.">
            <mkdir dir="${build.classes.dir}"/>
            <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
        </target>
        <target name="post-compile"/>
        <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
        <!--compile-single-->
        <target name="pre-compile-single"/>
        <target name="do-compile-single">
            <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
            <mkdir dir="${build.classes.dir}"/>
            <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
                <classpath>
                    <path path="${libs.classpath}"/>
                </classpath>
            </javac>
        </target>
        <target name="post-compile-single"/>
        <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
        <!--proguard-->
        <target name="proguard-init" description="Up-to-date check before obfuscation.">
            <property name="obfuscation.level" value="0"/>
            <condition property="no.obfusc">
                <or>
                    <equals arg1="${obfuscation.level}" arg2="0"/>
                    <uptodate targetfile="${obfuscator.destjar}">
                        <srcfiles dir="${buildsystem.baton}"/>
                    </uptodate>
                </or>
            </condition>
            <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
                <srcfiles dir="${buildsystem.baton}"/>
            </uptodate>
        </target>
        <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
            <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
            <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
        </target>
        <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
            <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
            <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
            <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
            <property name="obfuscator.classpath" value=""/>
            <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
            <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
            <mkdir dir="${obfuscator.srcjar.dir}"/>
            <mkdir dir="${obfuscator.destjar.dir}"/>
            <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
            <property name="obfuscation.custom" value=""/>
            <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
            <mkdir dir="${obfuscated.classes.dir}"/>
            <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
            <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
        </target>
        <!--obfuscate-->
        <target name="pre-obfuscate"/>
        <target name="post-obfuscate"/>
        <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
        <!--lwuit-build-->
        <import file="lwuit.xml" optional="true"/>
        <target name="-lwuit-check">
            <condition property="lwuit.allowed">
                <and>
                    <available file="nbproject/lwuit.xml"/>
                    <isset property="is.mesdk_lwuit"/>
                </and>
            </condition>
        </target>
        <target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
        <target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
            <antcall target="lwuit_build"/>
        </target>
        <target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
        <target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
        <!--preverify-->
        <target name="pre-preverify"/>
        <target name="do-preverify" if="cldc-platform.trigger">
            <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
            <mkdir dir="${preverify.sources.dir}"/>
            <copy todir="${preverify.sources.dir}">
                <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
            </copy>
            <mkdir dir="${preverify.classes.dir}"/>
            <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
            <copy todir="${preverify.classes.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
        </target>
        <target name="post-preverify"/>
        <target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
        <!--set-password-->
        <target name="set-password-init">
            <property name="sign.enabled" value="false"/>
            <condition property="skip-sign-keystore-password-input">
                <or>
                    <isfalse value="${sign.enabled}"/>
                    <and>
                        <isset property="sign.keystore"/>
                        <isset property="sign.keystore.password"/>
                        <not>
                            <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
                        </not>
                    </and>
                </or>
            </condition>
            <condition property="skip-sign-alias-password-input">
                <or>
                    <isfalse value="${sign.enabled}"/>
                    <and>
                        <isset property="sign.keystore"/>
                        <isset property="sign.alias"/>
                        <isset property="sign.alias.password"/>
                        <not>
                            <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.alias}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
                        </not>
                    </and>
                </or>
            </condition>
        </target>
        <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
            <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
        </target>
        <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
            <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
        </target>
        <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
        <!--create JAD-->
        <target name="add-configuration" unless="contains.manifest.configuration">
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
    </nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
    </nb-output>
        </target>
        <target name="add-profile" unless="contains.manifest.profile">
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
    </nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
    </nb-output>
        </target>
        <target name="create-jad" if="cldc-platform.trigger">
            <fail unless="dist.jad">Must set dist.jad</fail>
            <mkdir dir="${build.dir}"/>
            <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
            <mkdir dir="${dist.jad.dir}"/>
            <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
                <not>
                    <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
                </not>
            </condition>
            <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
                <not>
                    <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
                </not>
            </condition>
            <condition property="contains.manifest.configuration">
                <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
            </condition>
            <condition property="contains.manifest.profile">
                <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
            </condition>
            <property value="" name="evaluated.manifest.apipermissions"/>
            <property value="" name="evaluated.manifest.pushregistry"/>
            <property name="manifest.jad" value=""/>
            <property name="manifest.manifest" value=""/>
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
            <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
            <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
            <property name="manifest.available" value="true"/>
        </target>
        <!--do-extra-libs-->
        <target name="do-extra-libs" if="extra.classpath">
            <property name="dist.lib.dir" value="${dist.dir}/lib"/>
            <mkdir dir="${dist.lib.dir}"/>
            <copy todir="${dist.lib.dir}">
                <path path="${extra.classpath}"/>
                <flattenmapper/>
            </copy>
        </target>
        <!--nokiaS80-manifest-->
        <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
            <fail message="Main class is not set!">
                <condition>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </condition>
            </fail>
            <mkdir dir="${build.dir}/j9"/>
            <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
            <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
            <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
            <property name="manifest.available" value="true"/>
            <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
        </target>
        <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
            <pathconvert property="logo.icon.name" pathsep=" ">
                <path path="${nokiaS80.application.icon}"/>
                <chainedmapper>
                    <flattenmapper/>
                    <globmapper from="*" to="*"/>
                </chainedmapper>
        

    The error says class file is missing, you can try to clean and build.

  • Time Machine backups to OS X Server intermittently failing with error 21

    I have a Mac Mini running OS X Server, with two USB drives connected and selected within OS X Server as Time Machine backup destinations.  I have an iMac and a Macbook Air, both of which  are using Time Machine to backup themselves up to the Time Machine Service on the server (all are running the latest version of Mavericks).
    Intermittently, the iMac backup fails.  The iMac's console log shows:
    Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
    Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Waiting 60 seconds and trying again.
    Aug 23 13:56:06 Nigels-iMac.local mds[72]: (Normal) Volume: volume:0x7fa702995000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Backups-1
    Aug 23 13:56:45 Nigels-iMac.local com.apple.backupd[15418]: Network destination already mounted at: /Volumes/Backups-1
    Aug 23 13:57:29 Nigels-iMac.local com.apple.backupd[15418]: Quota in effect for '/Volumes/Backups-1': Zero KB
    Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
    Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Giving up after 3 retries.
    Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Backup failed with error 21: 21
    The Mac Mini console log shows nothing apparently wrong.
    Restarting the server (not the iMac) clears the problem and the iMac will then once again backup to the server for some time (e.g. a day).
    There are two USB drives, one for each backup sparse bundle and although the two disks have different names in the Finder, OS X Server has named them both Backup (one is shown as 'Backup' and the other as 'Backup-1' in the Time Machine Services Backups tab).
    I am wondering whether the failure occurs when coincidentally the iMac and the Macbook both try to back up at the same moment.  Any advice about how to isolate the problem, or a solution would be gratefully received!

    1. This procedure is a diagnostic test, to be carried out on the server. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

    Hello all,
    Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
    Time Capsule won't backup if Modem (Motorola SB6121) attached
    This was on Feb 10th resolved. Few days later I upgraded to Yosemite.  Backups were working fine since.  
    Yesterday I happen to notice my last backup was 5 days ago.  I looked in the console logs and saw:
    2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
    2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
    2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
    2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
    I called Apple.  Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
    But the next hour it failed
    Called Apple again, this time to Sr Advisor.  He suggested factory reset of the TC and set up again.  Also first backup worked then rest failed
    Third call to Apple useless also.  He was asking questions I didn't feel relevant.  He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
    I begged him to collect data to submit to engineering, which will take days to get a reply.
    So I thought I would throw this out to the community....
    TC Is NEW (replaced from last issue).  Mac is 8 months old (iMac 27"), Os is Yosemite,  TC also new (latest model)
    Thanks...

    Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
    Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
    This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Encoding failed with error -43

    I push "burn" and the error message: "Encoding of (file name.mov) failed with error -43" pops up immediately upon beginning the encode phase.
    This just started today...can't figure out what is different from yesterday...I am importing 16x9 anamorphic Quicktime files (audio and video, directly exported from Final Cut Pro and re-formatted for aspect ratio through QTPro. No menu, no jumps, nothing but video/audio with "first Start" in the track (set for 16x9 letterbox display mode)...
    any suggestions? I am dead in the water...

    Welcome to the boards
    Try sending the movie to Compressor and encode in there (as m2v and ac3 file) then bring those in

Maybe you are looking for