Jtech Pager System and FXO
Hello and thanks in advance.
I am attempting to connect a Jtech Pager system to a FXO port. This is not an over head paging system just a pager system that uses one analog line. When I attempt to activate the pager system using the created partition I receive a busy signal.
Will I need a TAMB type device when connecting a pager system? I did not know if this type of device is necessary when using a pager system as it is necessary when using an overhead paging system.
The cables has ot be corss stacked while connecting two switches.
With fallback bridging, the switch bridges together two or more VLANs or routed ports, essentially connecting multiple VLANs within one bridge domain. Fallback bridging forwards traffic that the switch does not route and forwards traffic belonging to a nonroutable protocol such as DECnet.
Similar Messages
-
Firefox became very heavy on my system and it some pages freeze for a second or tow second however my processor 2.4 and ram 256 how can i fix it ?
== This happened ==
Every time Firefox opened
== after firfox 3 and later versioni think your RAM is so low, i have 3gb ram and has some problem when firefox opened and worked for many hours.
-
My iPad Air crashed after updating latest iOS software. After resetting the system, Pages, Numbers and Keynotes are not available. How do I get the apps back into my iPad?
You can also re-download the apps.
App Store>Purchased>Re-download apps -
I have used Pages 09 and Keynote without any major problems until this new update. I have read many of the fixes but have a problem. When you get Pages 09 and Keynote back, Apples continues to want to update the 09 system. So it stays updated. I have had to turn off my auto updating that was nice but I'll do it one at a time in order to keep the Pages 09 and Keynote. When something works don't mess with it. Any fixes out there?
I can't say that I have had a problem playing videos in Flash because I could always play them in browsers other than Firefox.
In Firefox Tools>options>Advanced Hardware acceleration is turned on.
I don't know if that is different that tuning it off and on in Flash or not, but for now it is a moot point.
As I stated in my previous message, after following all earlier suggestions/instructions nothing helped. But The latest one, someone suggested that maybe version 17 of Flash might be a stable version.
I made no other changes except to install it, a few days ago, and so far so good.
Many thanks for your help,
Giovanni -
I was told at the Apple Store when Mavericks was introduced that Pages, Numbers and Keynote would be offered at no charge with Mavericks. When I downloaded Mavericks, I could not figure out how to download them without the charges. When I downloaded the most recent OS to my iPad, I got a prompt to download them. Can someone tell me how to download them without the charges?
Welcome to Apple Support Communities
It's not correct at all. It is true that Apple is offering Numbers, Keynote and Pages for free, but only for users who have purchased a Mac after October 1st, 2013, and for existing iWork '09 users. If you have not got iWork '09 and you purchased your Mac before October 1st, you need to pay for these apps.
The new iWork version (Numbers, Keynote and Pages) is criticised by its lack of features. Instead, I recommend you to get LibreOffice or, if you need the most complete productivity suite, Office for Mac. Give LibreOffice a try first -
How to use Top of page system fields like sy-tvar0 to sy-tvar1
thanks in advance
RishiHello ,
in the standard title you can have &0 ... &n. The program must put the values to fields SY-TVAR0 to SY-TVARN.
see this sample:
Pass the variables for the list heading
MOVE SY-Title TO SY-TVAR0.
MOVE SY-Datum TO SY-TVAR1.
MOVE SY-Pagno TO SY-TVAR2.
From output screen: System>List>List Header
Click on first white line and enter the following title to the yellow box: Title: &0 Date: &1 . Page No: &2......
Hope its what you mean.
Vasanth -
I have been having problems with my Macbook ever since I had it in for service to replace the battery. The issue is when I am surfing the page disappears and goes back to the desk top, and I have to reload it again. This happens quite often while I am online, and is a definite glitch.
Please help.
Sam OliverioString[] message = {
"One, two, buckle your shoe",
"One, two, buckle your shoe",
"Three, four, shut the door",
"Three, four, shut the door",
"Five, six, pick up sticks",
"Five, six, pick up sticks",
"Seven, eight, lay them straight",
"Seven, eight, lay them straight",
"Nine, ten, this is the end",
"Nine, ten, this is the end"
if(n>0)
System.out.println(message[n]);
else
System.exit(0); -
Control the page height and page width of pdf report using pasta_pdf.cfg
Hi All,
I've followed the note: 338990.1 (how to print publisher PDF reports via the concurrent manager) in metalink to print a PDF REPORT. Everything work fine except the page height and page width is used as default (8X11). Is there anyway that i can custom page height and page width size such as: legal (8.5X14).
current set up in pasta_pdf.cfg
[DEFAULT]
%% ============== Preprocessing Command ==================== %%
% Pasta can use a preprocessing command to invoke any executable
% that supports an input file and an output file (a filter program).
% You can use redirection. Pasta will invoke the filter program
% to preprocess the Pasta output before passing it to the printing
% command. By using the preprocess option, you can generate output
% formats other than the formats Pasta currently supports. For
% example, you can generate PCL output.
% You can use {infile} and {outfile} in this option.
% {infile} is the output file generated by Pasta. You can use
% it as input for the preprocessing command. It is a temporary
% file and will be deleted after being passed to the
% preprocessing command. {outfile} is the output file generated
% by the preprocessing command. Pasta names it temporarily and
% it will be deleted after being passed to the printing command.
% If you want to keep it, you can name it by using the '-o'
% command line option. Pasta will copy {outfile} to the file you
% specify.
% Preprocess for PDF output
% This is an example for PDF output to print.
; Xpdf
preprocess=/usr/local/bin/pdftops {infile} {outfile}
; Ghost Script
; preprocess=pdf2ps {infile} {outfile}
; Acrobat
; preprocess=acroread -toPostScript -pairs {infile} {outfile}
%% ============== Printing Command ========================= %%
% You can specify the printing command and options you want
% to use to print your report. Pasta will pass the final output
% to this command. {printername} will be replaced by the
% actual printer name passed through the command line option
% (-pn), so in most cases you don't have to change these
% options.
% for UNIX platform
printCommand=lp -c -d{printername}
% for Windows platform
ntPrintCommand=print /D:{printername}
%% ============== Error Log File =========================== %%
% This tells Pasta to create a log file. The default error
% output is stderr.
;errorlogfile=pasta.log
NOTE: pasta version 3.0.4
form server 6.0.8.27.0
third party tool is pdftops
Thanks
Kevini think that can be down from the printing direver/styles/prt files when you added the printer at your apps system check the follwoign for more info.
( How to Implement Printing for Oracle Applications: Getting Started )
Note:269129.1
(Step By Step Guide to Set Up a Printer in Oracle Applications)
( Note:60936.1)
fadi
http://oracle-magic.blogspot.com -
I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this? Am i right? Is there any body out there right now that could help me? I'm thinking about going from 8.1.3 to I guess yosemite? Or is that for Mac computers? I don't understand the language entirely on the help page. Anyone's straight forward and easy stepped advice would be much appreciated. I'm so frustrated and I need a job so badly! Drowning in debt. Any help appreciated!
Thanks,
AYou're a Windows user, correct? If so, read here:
http://support.apple.com/kb/DL1455 -
Hello everybody!
I have macbook pro which I bought 8 months ago and I have a mac universal which I bought 5 years ago. I usually use my macbooks for online research, pages, keynote and numbers. Besides that I dont do something special. But lately both my macbooks are running very slow and most of the time I have pop-ups on the safari or on firefox. I have an application which name is mackeeper to speed up my both macbook but It seems like it doesnt do anything. I am trying to learn more about macbook. What kind of applications that I have to use for speed up for my macbooks? Or what should I do? Please let me know I would like to learn more about Mac.
(my both macbooks are up to date)
Thank you so much!Hi Dibenkorn, first of all thank you so much for your time!! this report belongs to my macbook universal one! I dont have the BBM application but I believe I still have its root under my data! What should I do? How I can delete all those 3rd party links!!!
Hardware Information:
MacBook (13-inch, Mid 2010)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 17:48:1
Disk Information:
TOSHIBA MK2555GSXF disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 249.2 GB (108.13 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Built-in iSight
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.67)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.rim.BBDaemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.hp.productresearch.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.rim.BBLaunchAgent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.akamai.client.plist 3rd-Party support link
[not loaded] com.akamai.single-user-client.plist 3rd-Party support link
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.intego.virusbarrierexpress.agent.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
User Login Items:
BlackBerry Device Manager
Internet Plug-ins:
o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
GarminGpsControl: Version: 2.9.3.0 Release 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
SafariRestore: Version: 6.0.1
Facebook Improved: Version: 1.8
Reload Button: Version: 1.2
Cloudy: Version: 1.4
Social Fixer: Version: 7.501
Translation Window: Version: 1.7
Turn Off the Lights: Version: 2.3.0.5
Duplicate Tab Button: Version: 2.0
Better Facebook: Version: 5.941
fb: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
TuneUp Visualizer: Version: 2.2.0 3rd-Party support link
User Internet Plug-ins:
Unity Web Player: Version: UnityPlayer version 2.6.1f3 3rd-Party support link
3rd Party Preference Panes:
Akamai NetSession Preferences 3rd-Party support link
Flash Player 3rd-Party support link
Java 3rd-Party support link
Old Applications:
/Developer/Applications/Graphics Tools
/Applications/iWork '09
MacFamilyTree: Version: 6.2.9 - SDK 10.5 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Untitled: Disk size: 232.09 GB Disk used: 131.38 GB
Destinations:
G-DRIVE slim [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 2
Oldest backup: 2012-08-28 00:34:40 +0000
Last backup: 2012-11-07 17:42:44 +0000
Size of backup disk: Adequate
Backup size 465.44 GB > (Disk used 131.38 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU:
6% MacFamilyTree
5% WindowServer
1% EtreCheck
0% BBLaunchAgent
0% aosnotifyd
Top Processes by Memory:
209 MB com.apple.WebKit.Networking
104 MB com.apple.WebKit.WebContent
104 MB Safari
63 MB MacFamilyTree
59 MB Finder
Virtual Memory Information:
39 MB Free RAM
639 MB Active RAM
590 MB Inactive RAM
362 MB Wired RAM
2.16 GB Page-ins
191 MB Page-outs -
MVC model in Web systems and applications
MVC model in Web systems and applications
Object-oriented design model is experience, MVC idea is a user interface for the original. This article discusses how the major application areas in the new Web design patterns and the use of MVC framework. The article first introduced the concept of design patterns and characteristics, and MVC architecture design concepts and analysis of the MVC framework contains several key models. Based on the characteristics of Web applications on how to use patterns and MVC framework made some design ideas.??
1. Introduction
1.1 design model
Object-oriented technology and the emergence of software applications has greatly enhanced the trusted and software quality. Object-oriented programming than previous models to various programming simple and efficient, but the object-oriented design methodology than the previous design methods to complex and much more skill, a good design should be both on the issue of gender, but also to take full account of the problems and needs sufficient interoperability. In the past 10 years, people in the object-oriented technology and the practical application of research to explore certain issues in relation to the creation of a number of good solutions, the so-called object-oriented design patterns. Object-oriented technology is one of the purposes of enhancing the software trusted, and to design model, design programmes in important positions from a deeper sense of meaning and essence embodies trusted. There are many people in the design model definition, which cited Christopher Alexander is the largest design model definition : Each design model is a tripartite rule, which expresses a contextual environment (Context), a problem and a solution. Design models generally following basic elements : model name, the purpose solution effect 1995-1998 code and related design models. There are several classifications design patterns can be divided into a model based on the purpose (Creational), structural type (Structural) and the type of behaviour (Behavioral) three. It is mainly used in the creation of a model-based object model-based structure to deal primarily with the category or combination of objects, used to describe behavior-based model is the main target for the category or how stress and how to allocate responsibilities. Design patterns can be divided into categories based on the scope and target mode model type model dealing with the relationship between the categories and sub-categories, these relations through the establishment of succession in Translation moment to be finalized, are static. Model is targeted at addressing the relationship between the moment of change these relations in the operation, more dynamic. Model features : through the experience acquired in a structured format to write down, avoid encountering the same problems on the first design, exist in different abstract level, in continuous improvement, can be trusted artificial product for the design and best practice in the world to be combined to address larger issues.
1.2 MVC framework
MVC was first used in a user interface Smalltalk-80 China. M representative models Model, representatives maps View V, C representatives controller Controller. MVC trusted code with the aim of increasing the rate of data reduction expressed, the data describing the operation and application coupled degrees. Also makes software Keweihuxing, restorative, expansionary, flexibility and packaging of greatly enhanced. Single-user applications are usually incident-driven user interface to the organizational structure. Staff development tool with an interface painting of a user interface interface code based on user input and then prepare to implement the corresponding moves, many interactive development environment encouraged to do so, because it emphasizes first and then a functional interface. Some software design model is the strategy that will be fixed before the code into the regular system of the final. Result is that the procedures and organizations around the user interface elements in the user interface elements of those moves, data storage, applications and functions of the code is used to indicate the way intertwined. In single-user system code structure can be so, because the system will not demand frequent changes. But for a large system such as large Web systems, or e-commerce systems to be applied. Model by incorporating data from a variety of access and control data can be separated to improve distributed system design. MVC design pattern is composed of three parts. Model is the application object, no user interface. Type in the screen showing that it represents the flow of data users. Controller user interface definition response to user input, the users responsible for the action against the Model into operation. Model View data updated to reflect the adoption of data changes.
2. MVC design pattern,
An MVC framework for the design of the system includes many models, but with MVC is most closely related to the following three models : Observer, Cambridge and Strategy.
2.1 Observer models
MVC through the use of purchase / notification form and the separation of the Model View. View to ensure that their content accurately reflected Model and state. Once Model content changes, there must be a mechanism to allow notification to the relevant Model View, View can be made relevant at the appropriate time updating of data. This design is also more general problems can be solved, the target separation, making a change to the target audience affect others, which targets those who do not know the details of the object being affected. This is described as Observer in the design model. Model type : Observer model is the object-oriented model, it is behaviour-based model. Model purposes : definition of hierarchical dependence relations between objects, or when a target value of the state change, all its dependent relationship with the object are notified and automatically updated. There are a variety of data may show a way, in different ways and may also show. When a way through a changed data, then the other should be able to show immediately that the data change and do accordingly.
Effect :
1. Abstract coupling. I only know that it has a target audience of some observers, the observers met each abstract Observer category simple interface, does not know their specific affiliation categories. This makes the coupling between goals and observers smallest and abstract.
2. Support radio communications. Needless to notify designated observers goals, how to deal with the observer informed decisions.
3. Possible accidents updated. We update logic, avoiding mistakes updated.
2.2 Faculty model
MVC is an important feature of View can nest. Nest can be used for any type of combination of local maps available, but also management of type nest. This thinking reflects the type and mix of components will be equal treatment design. This object-oriented design ideas in the area of Cambridge has been described as a design model. Model types : Cambridge model is the object-oriented model, it is also the structure type model. Model purpose : to target portfolio into tree structures to express "part-whole" level structure. Prepared for the use and combination of individual target audiences with the use of consistency.
Effect :
1. Definition of a target portfolio includes simple objects and the structure of the category level. Simple objects may be complex combinations of objects, and can be targeted portfolio mix. This customer-code used in the target areas can use simple combinations target.
2. Simplify customer-code. Needless to know their customers - a mix of target audiences is a simple target or can use these items in a consistent manner.
3. Easier to add new types of components. New components can easily be changed to a combination of customer-targeted codes.
2.3 Strategy model
Another important characteristic is the MVC can not change the View of changes View response to user input. This often requires a change in response to the logic of the system is very important. MVC to respond to the logic involved in the Controller. Controller of a category level structure could easily change to the original Controller appropriate, a new Controller. View Controller son used to achieve a specific example of such a response strategy. To achieve different response strategy, as long as examples of the use of different types of replacement will Controller. Also in the running time by changing the View Controller for users to change View of response strategies. This View-Controller relationship was described as an example of Strategy design pattern. Model types : Strategy model is the object-oriented model, it is behaviour-based model. Model purposes : definition of a series of algorithms, and their packaging, and ensure that they can replace each other, making algorithms can independently use its customer-change.
Effect :
1. Strategy category levels for Context definition of the relevant algorithms can be trusted or behaviour.
2. Alternative methods of succession. If the direct successor Context, with different acts will be added Context act, the realization of which would algorithm mixed up with Context, Context hard to preserve and expand, but can not dynamically changing algorithms. Will be enclosed in a separate Strategy category algorithms to enable algorithm independent Context change easily cut over expansion.
3. Can provide the same acts different date.
4. Strategy-must understand what customers between different.
5. Context and Strategy communications between costs.
6. An increase in the number of targets.
3. MVC in Web application system
Now some of the distributed systems such as Web-based B2B e-commerce system, suitable for use MVC framework. Through analysis from the perspective of high-level applications can be a target divided into three categories. Category is shown for the target audience consists of a group of commercial rules and data, there is a category that is receiving requests to control commercial target to complete the request. These applications often need to change is shown, such as web style, color, but also need to demonstrate the contents of the display. And the business rules and data to be relatively stable. Therefore, said that the frequent need to change the View objects that the business rules and data model to be relatively stable target, and that the control of the Controller is the most stable. When the system is usually issued after the View objects by artists, designers or HTML/JSP system managers to manage. Controller target applications development personnel from the development and implementation of rules for commercial and business development personnel from the target data, database managers and experts in the field of common completed. Show in Web?? or customers - control logic can be Servlet or JSP, dynamically generated Html. Generally used Servlet better than using JSP. JSP will be better with the Html code of separate codes for page designers and developers of separation efficiency. Servlet and JSP can complete all complete functions, actually JSP eventually converted into a Servlet. And control of the target system exists in every level, the coordination of cross-layer moves. Contain business rules and data objects exist in the EJB layer (EJB-centred model) or Web?? (Web-centred model).
3.1 View in the Web application system
View of the system shows that it fully exist in Web??. General by JSP, Java Bean and Custom Tag. JSP can generate dynamic web content using Java Custom Tag easier Bean, but it can show the logic of packaging, and more conducive to modular trusted. Some well-designed in a number of JSP Custom Tag can even be used in different system duplication. Model for control of JSP and Java Bean objects. JSP through Java Bean objects to retrieve the data model, the Model and Controller object is responsible for updating the data on Java Bean. In general, can we devise all possible screen that users can see all the elements of the system. Based on these elements, to identify the public part of passive components and dynamics. Can consider the use of templates means to separate the content generated JSP public, also need to change their generation Html or JSP from a JSP templates to dynamically introduce these different parts (include methods). Another issue to consider is screen option, when dealing with End users request template automatically available to show that the concern that users must know what is the screen components. So can consider all screens on the definition of a centralized document, such as a document or text document java. Taking into account the possibility of changes in future document definition screens, the best use of text documents such as a XML document, so future changes to the recompilation. According to the URL and user input parameters to shine upon the results of a screen, of course, likely to be made on the basis of the outcome of the implementation of actions to choose different results screen. Therefore, the need for a request for matching resources with document (XML), if a URL request several different results, it must specify in the document need to control the flow (a controller object), as well as the corresponding screen different flows.
3.2 Model in the Web application system
Model objects represent business rules and business data exist in EJB layer and Web??. In J2EE norms, the system needs some data stored in the database, such as user account information (account model), the company's data (company model), some not recorded in the database. If a user browsing the current catalogue (catalog model), the contents of his shopping (shopping cart model). Which one of these models exist in the data according to their life cycle and scope to decide. In Web?? a HttpSession and ServletContext and Java Bean objects to store data in the EJB layer is a data storage and logic EJB to. Web?? the Java Bean objects stored in the model layer model of the EJB object data copy. Because there are many different EJB tier model targets, so Web?? through a ModelManager to control the EJB layer object model in ModelManger background model can be used for packaging methods. In the EJB layer and the rules have all the data into EJB model is inappropriate. If the database can visit the Dao object model into objects. Dao can be encapsulated and the specific details of the database in the world, if we can write a different table, a number of databases, or even multiple databases. If the orders can be a model for OrderDAO, it may have to deal with Order table, table and OrderItemLines OrderStatus table. Value can also consider the use of targets. Value can be a target of securing long-range targets, because every time the remote object attributes could be a long-range redeployment process will consume network resources. EJB objects in the distance can be used instead target. In the distance, one-time items to be targeted instead of the value of all attributes.
3.3 Controller in Web application system
Coordination with the Model View Controller object to the request of users into the system to identify incidents. In Web?? generally a MainServlet (or Main.jsp), and receiving all requests, it can use screen flow management devices (ScreenFlowManger) decided next screen. There is a general request processors RequestProcessor contains all requests are needed to be done to deal with logic, such as the request translated into system events (RequestToEvent). Acting processors usually also includes a request for ClientControlWebImpl, it is logical to deal with the EJB layer in Web?? Acting. In EJB layer, a layer for EJB tier Web ClientController provide the CD visit. Another StateMachine used to create and delete ejb handle Web?? sent to the incident. Controller Another important function is synchronous View and Model data. ModelManger contained in a ModelUpdateManger, it puts events into a Model System assembly that all the needs of synchronous Model, and then notify Listeners do synchronous operation.
4. Concluding remarks
In recent years, with the Internet technology development and the emergence of new business models, the Web is based on a large number of applications. On how to design these systems architecture, and gradually there has been some convergence of opinion, the most important point is that its structure should be rational in the open. Demand than ever faster development of technology and design concepts, systems for the future, the cost of upgrading the smallest, research software systems architecture still very useful and necessary.Bravo. And your point is?
-
itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.
Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John -
I went to update my iphone 4s to the new system, and it just went to restore itself? It was just in the process of restoring itself so I had no option of leaving the page or anything. I was forced to restore it. Thats fine, but then it went back to the same restore page that i had no option but to do. ok..I restored it again. and again and 3 more times. It is just going in a circle of restoring for no reason or going anywhere. So now I dont have a phone because it went crazy? hmm Samsung?
Hey Sound!
Have you tried Repairing Permissions? If not, go to your applications folder, then to utilities and the disk utility. Then select "Repair Permissions." After it's done restart and try connecting again.
Hope this helps!
Sharon -
[SOLVED] Page Up and Page Down keys no longer working correctly
uname ...
3.12.9-2-ARCH #1 SMP PREEMPT x86_64
I use KDE 4.12.2
For some reason - applications in KDE are no longer responding to the PgUp and PgDown keys.
For example previously in firefox PgUp/PgDown would scroll the current web page up or down, but now it doesn't work.
Firefox DOES change tabd using CTRL + PgUp/CTRL + PgDown as previously.
Another example Okular ignores PgUp/PgDown - although (again) it does respond to CTRL + PgUp/CTRL + PgDown.
Previously it responded with the correct move one page up and down.
If I go to a terminal
showkey
keycode 28 release
# PgDown
keycode 109 press
keycode 109 release
# PgUp
keycode 104 press
keycode 104 release
If I try to set a keyboard sortcut in a KDE app (e.g. change the Previous / Next page keyboard shortcut in Okular) the app recognises the PgUp and PgDown keys, but the application doesn;t respond.
I've also tried a different keyboard and I get the same behaviour.
I'm completely baffled, any help?
What could be causing this strange behaviour?
Last edited by bhrgunatha (2014-02-22 03:51:02)From what I understand - they would have to be global keyboard shortcuts. I've looked in the KDE system settings anmd there are no global shortcuts defined for PgUp and PgDown. I certainly haven't configured anythin to use them.
I'm not sure if there is anywhere else to look for them.
EDIT: So after about an hour or so of poking around, it seems I DID set shortcuts for PgUp/PgDown (and promptyl forgot about them.)
These set global shortcuts that aren't recognised by the KDE system settings shortcuts applet.
Last edited by bhrgunatha (2014-02-22 03:50:41) -
Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5
PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601
System Manufacturer Intel Corporation
System Model S5520SC
System Type x64-based PC
Video NVIDIA Quadro FX 4800 driver v.320.78
Display Dell 27" LCD (DisplayPort)
Display Dell 27" LCD (DisplayPort)
Processor Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM) 96.0 GB
Page File Space 0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace
Maybe you are looking for
-
Hi I am following below link to hide/show my columns dynamically. See "Column Formatting" http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187.pdf As per doc, element can be made private/public. <items type="PUBLIC"> <item> <name>Plasma TV</name
-
My "iTunes won't open"-problem solved!
Hey guys! With not so much help here from the forums, and with a **** of a luck, my iTunes just started. For the first time in a week and after days of frustrating struggle. I yet again want to thank Rachyl here on the board for helping out. She didn
-
How can i export pictures in PNG FILE
Using adobe Lr 4.4
-
Essbase system9 Shared Services configuration
Hi posting again.... :-) I was wondering if someone could shed some light on a few strange things that have been happening in my wonderfull world of migratin from Essbase 7.1.5 to sys 9.3.1. I have installed of the foundation server software on one s
-
Printing directly from Illustrator
When printing directly from Illustrator is there a way to have the dimensions printed along with crop marks and other standard marks that are available on the print dialog screen? Thanks, S