Jtextarea stays blank when typing in it - Please help!

Hi all,
When I try to type into a Jtextarea, no text appears at all. The area stays blank.
I know it is there because I did a select all + copy, then pasted it into notepad and it was there.
Anybody had the same problem?
Thanks!

Hi,
Did you make any changes to its Background or Foreground color ? It could be both colors are corresponding to each other, then you will not be able to see anything in it. If this is not the case, can you show me your code ?
cheers,
ChongWei

Similar Messages

  • Jtextarea stays blank when typing in it

    Hi all,
    When I try to type into a Jtextarea, no text appears at all. The area stays blank.
    I know it is there because I did a select all + copy, then pasted it into notepad and it was there.
    Anybody had the same problem?
    Thanks!

    no...
    i also tried revalidate() and repaint() and it didnot work...

  • Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

    Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

    See if any of the following fix it.
    Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
    If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
    A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    If you want to get a little more "exotic" you can try remapping the function keys.  I did a little google searching and the hits that looked promising are,
    Mapping volume and eject keys to 3rd-party keyboard Other Hardware
    Spark
    Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
    You can also export and import your Hot Keys library, or save it in HTML format to print it.
    Spark is free, so use it without moderation!

  • I can't get Firefox 10.0 to recognize 1password 3.8.15. The extension doesn't stay as an add-on. Please help!

    I can't get Firefox 10.0 to recognize 1password 3.8.15. The extension doesn't stay as an add-on. Please help!

    1passowrd team released support for Firefox 10 already. Do an autometic update and check.See:
    * http://support.agilebits.com/discussions/1password-for-windows/487-firefox-100-doesnt-support-1password

  • [NAND] s_cxt_boot:88 sftl: error, unclean shutdown; adopted 23 spans thats what appears in my iPhone 4s when I wake up please Help me

    [NAND] s_cxt_boot:88 sftl: error, unclean shutdown; adopted 23 spans thats what appears in my iPhone 4s when I wake up please Help me

    First try resetting your phone - hold the HOME and SLEEP buttons at the same time until an Apple logo appears.
    If that doesn't work restore the phone using Recovery Mode: http://support.apple.com/kb/HT1808.
    And if that fails it is probably a hardware failure (unless the phone is jailbroken; then that is the problem).

  • Hi, my ipad 2 won't charge nor sync but it can be charge when it totally drain. please help..

    hi, my ipad 2 won't charge nor sync but it can be charge when it totally drain. please help..

    Hello Thisbemadi,
    Thanks for using Apple Support Communities.
    Please ensure you are charging your iPad with the Apple cable and power adapter that came with the device.  If the issue persists, reset your iPad to its factory settings and try charging again.
    iPad: Charging the battery
    Use iTunes to restore your iOS device to factory settings
    Take care,
    Alex H.

  • Currently i am outside country and using my family person sim but my iphone display shows unknown call it become difficult when i missed call please help me out

    currently i am outside country and using my family person sim but my iphone incoming call display shows unknown call it become difficult when i missed call please help me out

    We are all users here
    what exactly do want any one to do ?

  • Firestarter's hit list stays blank when portscanned locally

    I have no real understanding of Iptables and just realized that after switching to AL I needed to set up some sort of firewall on my desktop. 
    So I pacman'd firestarted, found it in /opt/gnome/bin and ran the gui app
    I set up everything according to how I wanted it to act and then dropped it down into KDE's tray. 
    I hopped over to one of my other local computers and scanned it with nmap and Xscan and both turned up blanks.  Thats great... but Firestarter's hitlist is staying blank.  Not a single notification has popped up as it should, the home LAN has numerous M$ and *nix boxes.... and our public IP is scanned quite regularly by kiddies out there....
    Is there some configuration I need to carry out?  I've read the manual at Firestarter's homepage and drew a blank. 
    Anyone seen this behavior with firestarter?  It will stay running on the comp as its keeping my desktop slightly less vulnerable but I'd really like to gain full functionality from the program. 
    If ya'll need any more information please don't hesitate to ask...  Or a URL to go read at... I've drawn a blank on google and linuxquestions.org....
    Appreciate any replies,
    James

    longhornxtreme wrote:I would still like to be able to monitor my firewall without digging through log files but I appreciate the help anyways!
    I use normal iptables logging (the LOG chain) [from gShield (PKGBUILD  available on the forums)] and I redirect all my kernel output to vc12 from within syslog-ng. I could create a filter for those messages in syslog-ng to show, for example, the firewall messages on vc11, but haven't looked in the configs yet.
    Or, now I've thought of something else. You can create a FIFO with mkfifo and pipe all the firewall messages to that (also using a filter in syslog-ng). Let's assume you've created it with
    mkfifo /var/log/iptables_pipe
    Config your syslog-ng (I don't know if syslog is so flexible) to redirect iptables messages to /var/log/iptables_pipe (I can't tell you how to do this, because I haven't tried it yet).
    Do (in a console)
    while read line; do echo $line; done < /var/log/iptables_pipe
    and you'll have live report from iptables.
    ^ I think this should work, but haven't tested it yet (as I've said).
    Good luck.
    IceRAM
    P.S.1. There are some more advanced programs (as far as I remember) for detecting intrusions on Linux. I don't remember these advanced programs having a GUI, probably because they're enough complicated on the inside to create an interface for them. They just put the output in a log, you follow it whatever you want. You won't see much interactivity from the Linux firewalls, mostly because they were supposed to just sit on a machine and do their work.
    P.S.2. I haven't seen on linux a GUI firewall on linux doing popups and so on. This is probably because the components are well defined, the firewall runs as root and you probably log in as a normal user. Allowing a normal user to modify live the firewall rules creates a security hole.

  • WHEN I TURN MY MACBOOK ON, IT STAYS ON THE  GREY SCREEN. PLEASE HELP~

    it just stays on the grey screen forever and it wont actually turn on or load anything. PLEASE HELP.
    Message was edited by: Mcnugget9949

    Try this on your internal drive. Using Disk Utility to verify or repair disks.
    You also might try to reset the SMC and/or PRAM.

  • Screen is blank on a t43. PLEASE help me!

    I have a thinkpad t43. When I push power, it seems to turn on, but the screen is blank. When it turns on though it make beep signals, however, none of the suggested beep signals on the lenovo website match my beep signals. It makes four short beeps, followed by three long beeps. and the screen is blank. When its powered on, the power lights appear, and the CPU is clearly running. Frankly I don't know what to do. Please help me.

    Yea i tried that already with every screen in my house and they all didnt work. I tried your idea of playing with the lighting, and that didnt seem to work either. I have been looking online and it seems that the security board is most likely the one to blame. Only problem is they cost half as much as the darn computer did. But i hope that im wrong.

  • My ipad keep freezing when I open it, please help

    Whenever I open my ipad, it keeps freezing, I takes about 5 seconds to so Move, please help me

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My Power Mac G5 goes into the power sving mode on the start up and screen  stays blank. Monitor is OK. Help.....

    I Hv a Power Mac G5. s soon as I power it on, the monitor (Lacie) screen flashes a message saying It has gone into Power Saving mode and the screen stays blank.
    Once it happened before and was told to keep Command, option, P & R kes pressed while it is starting up and to keep it pressed untill it restarts. Tried that, but it does not work.
    How do I correct it?
    Please help.....
    I am located in India. and trying to exhaust all available options before I contact Apple Support......

    It sounds like your video card is not coming up, as the monitor is indicating that it probably has no active video coming from the computer.
    Two things to try:
    First, does video come up in safe boot (hold the shift key down while powering up)? 
    Second, how old is the PRAM backup battery?  While not a universal cause of video not coming up, we have seen reports of a weak PRAM backup battery being the cause of that failure.  If the battery is more than a couple of years old, a replacement is a good and relatively inexpensive initial troubleshooting step.  (My own theory is that at boot, the PRAM yields garbage data to the system which, in some cases, crashes a video driver or does other mischief.)
    If the computer is otherwise coming up OK, that is to say, you power it up and it hasn't clicked itself off and after a few minutes the fans haven't ramped into high gear, which indicates that the system is actually up and running even without video output, then it is relatively likeley that the video card has failed and must be replaced.
    One final thing to try would be a PMU or SMU reset (depending on where your G5 is in the progression of the model).  Information on PMU is here and information on SMU is here.

  • Ipod touch not responding blank white screen cant reset please help?

    Please Help!!
    I Just got the new a new ipod touch which was working fine.  I began updating to new apple software and while doing so I lost internet connection and ipod was unplugged.  Now all I get is a blank white or green screen even after reset.  The ipod won't even register when plugged into computer or itunes.  What can I do?? If I wait until the battery dies and run a restore will it work?? If so How do I get the games back I purchased recently? Please help I'm pretty new to all this.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I locked my Ipod 1st generation in zombie farm went to the toilet came back tried to unlock it but i cant screen was blank i have tried everything please help

    i locked my Ipod 1st generation in zombie farm went to the toilet came back tried to unlock it but i cant screen was blank i have tried everything please help

    If you have tried everything, then by definition, there is nothing else to try.
    Perhaps if you explained what you tried someone can help.
    If you have actually tried everything, then there is nothing anyone can do to help.
    Did you try reset?
    iPod touch User Guide (For iOS 4.3 Software)

Maybe you are looking for