JTF NOTES to AR NOTES Conversion

Hi All,
Can some one please help me in finding out any available APIs or interface for converting the JTF_NOTES_B (icollections notes) to AR_NOTES.
Thanks in advance,

Hello Try It
CreditNote_Line
RecordKey--     LineNum--     BaseEntry--     BaseLine--     TaxCode
RecordKey--     LineNum--     BaseEntry--     BaseLine--     TaxCode
1--     0--     3--     0--     CST@4
CreditNote_Header
RecordKey--     DocEntry--     CardCode--     DocDate--     DocDueDate--     DocNum
RecordKey--     DocEntry-     CardCode     DocDate--     DocDueDate     --                   DocNum
1--     (DocEntry Balank)--     V1010--     20100203     --20100203     -3
Thanks
Manvendra
Edited by: Manvendra Singh Niranjan on May 6, 2011 10:34 AM
Edited by: Manvendra Singh Niranjan on May 6, 2011 10:39 AM

Similar Messages

How to from more than one delivery note - conversion into one invoice

Dear Experts,
How to from more than one delivery note - conversion into one invoice?
Thanks and best regards,
Wilson Hong

Dear Wilson Hong,
Single invoice for multiple deliveries will takes place based on these criterion
1.If you want single billing document for multiple deliveries these data should be same in all order for all items.
-> Payer
-> Inco term
-> Payment term
-> Actual GI Date from Delivery
-> Shipping Condition
-> Account Assignment Group
-> Exchange rate (in case of export sale order)
-> Foreign trade data.
2.In addition to this you need to maintain proper copy control settings between delivery and invoice.
Go to VTFL transaction input your delivery type and invoice type then go in to the item level settings here you find field Data VBRK/VBRP maintain this field with routine 3-Single invoice.
If the above data and settings are exists you can do single invoice for multiple deliveries.
I hope this will help you,
Regards,
Murali.

I'm not conversation host anymore!

I had made a group chat a while ago, adding EVERYONE, so I was the only MASTER. But recently, a person from my group has changed himself to conversation host.
It showed this message: "(skypename) has been promoted to conversation host."
Now he is the MASTER of the conversation, and I have been demoted to a SPEAKER of the group.
I looked at /showmembers, and it showed that the person above and another person in the group is shown as ADMIN. He's been abusing his power as MASTER by kicking people out of the group, so I want to become the conversation host again!
Is that possible?

The MASTER role is a group -moderator- role, not the group -creator- role, which is ADMIN. The only way to have power back is for the ADMIN to grant you that power. Alternatively, create a new group.

Guitar to Keyboard note conversion ?

Hello all. I am new to GB 3. I love it thus far. I am a self-taught guitar player. But currently do not own one. I am temporarely stuck with the musical keyboard function unfortunetly. Not ever having played a keyboard I am having trouble making a G via musical keyboard sound like a G via guitar. In simpler terms, I do not know where a G chord would be on the keyboard or what key sequences I would need to press to create a normal G note. Is there some kind of conversion chart, standard setting and/or GB trick fo GB 3 that would help me? What part of the musical keyboard would I play to get a guitars standard chord A-G? And how would I set that up when I made a new project? Thanks for the help in advance!
1.83 Ghz Intel Core Duo Mac OS X (10.4.7)

A word about guitars: It is very hard to make a software instument guitar sound like a real guitar - the different sounds you make when you're strumming, picking or playing solo are just hard to reproduce with a single sample. For rhythm guitar it adds a lot to the credibility if you layer the chords not as a simple triad (like G-B-D) but the way they are actually voiced on a guitar, e.g. the G-B-D-G-B-G for the open G chord that I mentioned above.
(An experienced guitarist will hear what chord is played even without an absolut pitch ability, just because an open G chord has a very different characteristic from a D chord, for example.)

Problem Video to Audio not conversion

i just plugged my 80 GB ipod video into a friends computer and unplugged it and all my movies were gone but and when i went to settings>about it said 0 videos then i plugged it back in to the computer and where the video should be purple the purple is now blue

my bad i should have followed up and what i mean was that where it has a meter to fill up blue (audio), Purple (video), yellow (pics), etc and it still had 45 GB of memory used that was once video but some how turned to audio
i ended up saying skrew it and erased my ipod and synced it to his comp till i got home

HTC Incredible reboot fix that works and does NOT require hard reset

Like many of you unfortunate souls out there I have had my HTC Incredible go into a rebooting loop over the last month or so. The following recounts some observations and and a solution which appears to work.
First off, my son and I both have the same phone and software versions and apps. He does NOT get email on his phone because he does not want to. I do. His phone has NEVER rebooted. Mine has done so numerous times. My business partner also has the identical phone and software version, lives within 200 yards of me, and uses the email and has had numerous reboots and has gotten them even sooner than I saw them at first. My partner and I have set up email attachments and downloads to go to the SD card. So much for background info. Here is what I did to fix the problem followed by some other observations:
Open up the case of the phone and remove the battery
Remove the SD card from the phone.
Put it into an adapter that allows you to access files directly on your computer. In my case this was a Windows PC running Windows 7.
Mount the SD card in your computer and open up the browser to see the files on the SD card.
Look for a folder called ".Mail"
If your phone is like mine you will see hundreds of files, some of zero length. This was even though I had deleted most of the emails I received on my phone.
Proceed to directly delete any of the zero length files. For that matter, you may have other files like jpg's laying around of uncertain origin. I got rid of these and other strange files that seemed attached to no documents at all.
Remove the SD card and reinsert into your phone. Put the battery back in and the cover on then restart the phone. Your phone should run properly and you should not see any negative consequences from the files you deleted previously.
Some other observations relevant to this solution that bolsters my theory that this problem has something to do with the email application and also a problem with file system corruption on the SD card as a consequence of it.
I had previously seen the email application put some mail from a different account I was using into my main account. The files could not be deleted and even trying to do so would cause the mail app to force close.
My son has never seen the problem despite being in the same environment with the same phone and software. Relevant difference to me was that he was NOT using email and I was.
The email app clearly has bugs if it is leaving behind hundreds of files even if you delete the emails. Why? As a software engineer my first instinct would be to look to see if the file system locks were properly synchronized when the email app is writing to the flash file system. I am not conversant in Android OS programming nor the app code itself so this is speculative on my part. I would also look for a timeout on reboots if file system enumerations take too long. Lots of files on a system might trigger a premature timeout and reboot. Once again, this is speculative on my part but I sure wish I had the code to debug this myself.
These issues seem to coincide with a rapid rise in network traffic most likely because of the iPad 2/iPhone support by Verizon. I wonder if this additional traffic load on the network is opening up timing holes in the software because of backoff and retry intervals for certain apps. Once again I suspect the email app especially because it is vulnerable to network traffic issues as it tries to get email account updates.
I could be wrong about my theory as to why the problem is happening. My solution seems to work. As far as pulling the battery and putting it near your AC in the car, that did NOT work for me at all. Leaving the phone out of its protective case also had no effect. Only screwing with the files on the SD card mattered.
I hope this helps.

This problem has been seen for MONTHS now by people besides myself. My business partner is about to put a bullet in his phone because this has been happening for far longer than mine. I have little confidence in a fix anytime soon because this problem has been persistent for some time and there is a lot of denial in the field by Verizon. Verizon has to depend on HTC and Google besides themselves for fixes. How much would you like to wager on how this business relationship is working out? The first step in any solution is for a company to take some responsibility for it and so far no company has.

Not Converted : Free-hand SQL connection problem

While converting a Free Hand SQL report from Desktop Intelligence to Web Intelligence report in BI XI 3.1, I am faced with the problem
Not Converted : <REPNAME> - Free-hand SQL connection problem
It is be noted that there are some other Free Hand SQL Reports, that go converted and published without any error. The subject report has two Data Providers; one referring to the Universe and other from the Free Hand SQL tagged to a DB Connection

Ajay,
Some more points that can be of consideration to you to help understand my problems.
The conversion from DeskI to WebI is in the same version BI XI 3.1 and not to BI 4.0 in which Free Hand SQLs is not supported.
I have converted one other Free Hand SQL Report with an error "Partially Converted : <REPNAME2> - Conditional or permanent Hide Header not available in Web Intelligence", for which I had to edit the report in InfoView and un-tick the "Show When Empty" property of the table ( http://www.forumtopics.com/busobj/viewtopic.php?t=197157&view=next&sid=e6840aafa2d1267c66dae164d1dbf9db ). I think the solution mentioned in this link does not meet the purpose as the table is not displayed in the design time after the above untick.
Coming back to our issue, further probing into this aspect I stumbled upon this link meant for RCT for BI 4.0 version
https://csdwportal.dhhs.state.nc.us/downloads/Business%20Objects%20XI%20R4.0%20Docs/SAP%20BusinessObjects%20Report%20Con…
where in Section 3.4.9, there is a mention of the limitation in conversion as under
"Conversion of reports with free-hand SQL or stored procedures is only possible in Connected mode, since the Report Conversion Tool needs to use the secured connection to the database that is saved in the CMS."
I want to how the secured connection to the database in REPNAME2 is different from the subject report REPNAME1 as REPNAME2 got partially converted. The error reported for Subject report is "Free Hand SQL Connection Problem" and not conversion problem which can occur after the connection is established.
I did check the security properties of various FHSQL connections in the CMC and all of them are identical in nature.
Please advise

Customer Calls and AR Notes

Do we have any API for Customer Calls and AR Notes conversion?

Not sure. If you are on R12 check the metalink note 558951.1...

Audio from one clip plays in preview, not on burned DVD

Have just completed burning a DVD of a 23-minute movie. Everything works fine except that the audio associated with one clip in the movie is almost non-existent. If I turn up the volume when playing the burned DVD through my DVD player/television, the sound can be heard, but barely. The audio from that portion of the movie plays normally while previewing and editing in Premiere Pro, it plays fine as a WAV file in Encore, and it plays fine in Windows Media Player. However, various attempt to burn that segment onto DVD, either alone or as part of the assembled movie, produce almost no sound. Again, the audio for the entire movie is perfect when played in Premiere Pro or Encore; the audio is also perfect on the burned DVD except for the one troublesome clip, in which the audio is so faint that it can't really be heard.

Dan,
Can't thank you enough for taking the time to hazard a guess about my problem.
I'm a real newbie with regard to video editing, so not conversant with much of the language, but all of the movie's clips were recorded in 16-bit stereo and the resulting DVD was played back through my television, which is a widescreen playing through its own speakers. I think the pertinent information, however, is that everything in the movie plays perfectly with the exception of this one clip, which was produced in exactly the same way as the rest of the movie. The one difference is that we used a different microphone for this clip. But again, this clip, like the rest of movie, plays fine when being previewed in the computer. Go figure.

Session not being clean up by JRun

My application is using IPlanet WebServer and JRun3.02 Application server. I am having a problem with active session not getting cleaned up by the App Server. When the user goes through the application and finishes the process, I invalidate the session by doing 'session.Invalidate()'. I also have set a 30 minute timeout value in the JRun global.properties file to invalidate the session if the user starts but not finish going through the application. However, the number of active session count in the JRun log doesn't seem to go down. After a few days, I ran out of sessions and the application hungs. I keep a few objects on the session including a pretty big 'pdfObject' that I use to create a PDF document on the fly.
Any idea why JRun not able to clean up the sessions after the 30 minute timeout has passed? Does the fact that I have stored objects on the session preventing JRun from invalidating and cleaning up the session?
Thanks in advance.

Hi afikru
According to the Servlet specification session.invalidate() method should unbind any objects associated with it. However I'm not conversant with JRun application server so I can only provide some pointers here to help you out.
Firstly, try locating some documentation specific to your application server which may throw some light on why this may be happening.
Secondly, I'd suggest running the Server within a Profiling tool so that you can see what objects are being created and how many of those. Try explicitly running the Garbage Collector and see if the sessions come down.
Keep me posted on your progress.
Good Luck!
Eshwar R.
Developer Technical Support
Sun microsystems

Chapter playlists ok in preview, not on burned disc

one long soccer timeline of 66 minutes, chapter playlists set up properly, all ok in preview but out of 15 chapter playlists, 4 do not work on burned disc...tried making image then burning on different media...no change....remade project from start and different playlists now not working...returns to proper menu but not at end of chapter, on TV dvd display chapter has appropriate time remaining but disc jumps to menu wrongly.....if i fast forward dvd it sticks for a second at point where it wrongly returns to the menu then continues in fast forward mode ....all playlists set up the same, links are right...

Dan,
Can't thank you enough for taking the time to hazard a guess about my problem.
I'm a real newbie with regard to video editing, so not conversant with much of the language, but all of the movie's clips were recorded in 16-bit stereo and the resulting DVD was played back through my television, which is a widescreen playing through its own speakers. I think the pertinent information, however, is that everything in the movie plays perfectly with the exception of this one clip, which was produced in exactly the same way as the rest of the movie. The one difference is that we used a different microphone for this clip. But again, this clip, like the rest of movie, plays fine when being previewed in the computer. Go figure.

Markers did not translate to idvd

I added markers to the timeline, exported and indicated markers = chapter markers, and hoped to add scene selection for those points in the movie when creating in iDVD. No dice. Could anyone kindly advise how to accomplish this and please be forgiving if it is obvious and simple - thanks

Hello,
you can find an explanation by reading these articles here:
http://www.fcpbook.com/Video9.html explains your case.
http://www.fcpbook.com/Video8.html
In order to see chapters you must export in QuickTime movie, not conversion.
Using the info on the above links you will change your exported movie to be properly understood by iDVD.
Regards,
Armando.

In a Conversion file, Using Java Script - IF statement with Greater,Less definitions

Hail to All Gurus,
Well, I've been trying to make a conversion file by using if statement of Java script with < , > definitions. unfortunately i got "Evolution error" over and over again.
Actually i want to convert all dates before 2009 as 2008.12. And the dates which is greater than 2009 will be converted as they are (e.g. 2009.01 or 2010.02 etc.).
Code is:
js:if(%external%.toString().substring(0,4)<"200900"){"2008.12"}else{%external%.toString().substring(0,4) + "." + %external%.toString().substring(4,6)}
SAP EPM version 10.0 SP15 Patch 2
Build 8586
Thanks for your help in advance

Sadi,
You can write if Statement in transformation not conversion.
Look at this docs,
How to Import Master Data and Hierarchies into SAP BusinessObjects BPC 7.5 from SAP NetWeaver BW
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c02d0b47-3e54-2d10-0eb7-d722b633b72e?QuickLink=index&…
Thanks

Data Conversion mapping u0096 BDC

I am coming across a scenario, as we are working on conversions, we are getting data from some 3rd party system into SAP and we need to update Infotypes using uploads.
Right now we are facing problem, which they have the separate data I mean their naming standard like they have different codes 01, 02, 03 and in SAP we have different ones.
What are the different ways that we map and validate our data before uploading it into SAP? They give us a master file extract from their 3rd party system and they want us to upload into SAP. In Sap we might have lot of difference of fields and value, which we might need to make sure and validate before we upload it in to SAP.
Could you please write your suggestions/inputs, how I can achieve this task.
Thanks

Hi,
You can also pre-populate an internal table with all the mapping values. For example: if the input value is 01, the corresponding SAP value = 'One'.
So you create an internal table with two fields, first with the legacy values and second with SAP values.
Then when you are looping through the internal table of the input file read the above internal table with key = input file value and then use the corresponding value.
And if it is an interface (not conversion) and the values keep changing, they I would suggest you t maintian a Ztable.
Good luck.
Venu

Unit Conversion issue for same material with Diff KPI

Hi,
i have a report with multiple key figures which form a structure.
Unit conversion for this report and all the key figures are defined at report level.
Below are the settings in place
Source currency:    Data record from target
Target Currency:    From variable ( Input variable in BeX report)
Conversion factor: Dyanamic Determination of conversion factor
                               Using Reference Infobject if available otherwise use T006
                               Reference Infobject: 0Material
Issue: For 1 Key figure conversion to TO is happening, however for other Key figure conversion is not happening for the same material.
Note: Conversion to TO is defined in BEX settings for Info object 0material and stored in DSO UOM0MATE.
Why for same material some key figures convert to target unit correctly and not the others?
See the attached screenshot. Sales Quantity is convertin to "TO" while Volume third party shows figue in"ERR" for same material.
Thanks
Nayab

Hi,
Following reasons cause to your issue,
1. Unit Conversion is not maintained for that particular material in source system Material itself, so that conversion data data may not updated in DSO (UOM0MATE).
2. For particular transnational data record key figure value don't have any base unit or units measures, that case also you may get that error.
Request check the transnational data in your InfoProvider and 0Material Master data and DSO data (UOM0MATE) . Correct the data based on that.
Check the Master data test in RSRV for 0Material, if any SID generations was missed or not.
I hope this can be help to find the cause of error , based on that you can resolve problem.
Thanks & Regards,
Leela Krishna.

JTF NOTES to AR NOTES Conversion

Similar Messages

Maybe you are looking for