JTree.linestyle doesn't show with Windows Look&Feel

Hi guys,
I've a problem with the JTree.linestyle. In my application works fine with the GTK and the Metal L&F, but in the Windows L&F doesn't shows any lines or angles.
I'm using j2sdk1.4.2.
Anyone else have the same problem? Any solution?
Thank you very much in advance.
Best Regards,
Carlos.

Solved in http://forum.java.sun.com/thread.jsp?forum=57&thread=433899&start=0&range=15#1951313

Similar Messages

Beats audio doesn't start with windows

Hi,
beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

Hi @MadGrin
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
When I checked the driver page for DV5000 I noticed it came with either XP or Vista.
Have you checked for any HP bios updates for your notebook? If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
Updating the BIOS
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Have you checked compatability for Windows 8.1. Windows compatibility Center
There is a option to scan your computer to check if your apps and device work.
Have you done all the updates for Windows 8.1?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Finder doesn't show any windows

Hi,
Recently I got a strange problem, sometime Finder doesn't show any window, I mean if I click on the Finder icon on the Dock no window is shown. Even if I kill Finder (via Terminal using "killall Finder"), also using ⌘+TAB or the App exposuré gesture there is no way to see the Finder window. The only fix is to restart the system!
And I also noticed (this is happen always) that when I copy/move a file the progress bar message box is not shown anymore, I see only the progress in the Finder panel over the file name!
Thank you.

Yes, menu bar was visible, honestly I didn't try to use ⌘+N, anyway I used ⌃+Click on the Finder icon (on the Dock) and even if I was able to see the list of Finder windows that were open I wasn't able to switch clickin on it. I've also tried to click on "New windows" (that I think should be the same as press ⌘+N) but no window was shown.
Thanks.

Ok, using Windows Look-feel ... any changes?

Hi:
I am presently using the Kunststoft theme. I want to the use the SUN supplied Windows Look-feel, but I cannot change the black background in my desktop application. I use JInternal frames but start with a desktop pane.
Does anyone know how to specifically change the black background over the "default" black background that the windows UI sets. I tried setBackground(new Color(255,0,0)); .. got red for a moment, then the screen changed to black.
Any help appreciated. I really like the Windows Look-feel, but a lighter background desktop area is preferred.
Thanks,
PiratePete

After you set the Windows L&F, you must set another property.
Here is an example:
//Set the system L&F
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
//Perhaps the system is windows, so you must do this if you want to see
//the mnemonics without pressint Alt key
WindowsLookAndFeel.setMnemonicHidden(false);

OHJ show blank topic window with Nimbus Look & Feel

Hi,
I am using Oracle Help for Java. When I switch to Nimbus Look & Feel the topic window is blank - it does not display topic information. When I click button <Print> in topic window the topic is printed correctly. The same help work properly in other Look & Feels.

The application that demonstrates this problem is jEdit - an open source text editor. I was told that the development of this editor started before JScrollPane was added to the JRE. Currently there's a lot of code, with high complexity, that replaces the JScrollPane for the text component of the editor, and I wouldn't go change it now. But leave that aside - I am particularly interested to know if this behavior is a bug in Nimbus or maybe my understanding of it is incorrect.
In any case I don't want to hide the casing of the scrollbar, just the scrollbar (thumb) inside the casing. Isn't it strange that without modifying the value or limits, the scrollbar suddenly appears when the view becomes wider? It should be the other way around, the scrollbar should become visible when the view becomes narrower than the contents.

Install disk doesn't work with Windows Vista

I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista. Apparently there's no ful feature option for Windows Vista on an HP laptop. After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

I am having a very similar problem but do not have an answer either. I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160. I am running Windows XP Pro. The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal. After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in. Remove the replicator and reboot and it worked ok. Plug it in again and BSOD. I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2. No go. Emailing Targus with the problem got no response. The port replicator is now relegated to my junk heap of useless rubbish.

Wireless router doesn't work with Windows 8

Does anyone have experience with attempted installs of wireless routers using windows 8? I have tried to install three devices but they will not install for windows 8 and I can't find a single one that is. I don't need the internet just a router for my home wireless. Printer, mp3, etc. If you look at all of the Linksys specs online, none of them say they are compatible with windows 8 just up to 7. I have tried to install two Linksys routers and two Belkin routers and none of them will install due to windows 8 being my OS. I use a verizon hotspot for my 4g internet.

To sfd1117:
I am able to see your post in this thread: http://community.linksys.com/t5/Social-Media-Support/Facebook-com-WRT110-Internet-access-problem/m-p.... I’ve posted a reply but let me post it here:
If other devices are connecting without any problem through the router then the problem might be on the new laptop. First thing that you can try is check if the laptop can detect other wireless networks. If it can, try connecting to the other network. If it’s able to connect then it must have something to do with the wireless settings of the router. If it can’t then the problem might be on the built in wireless card of that laptop. Before calling the laptop manufacturer though, you can still try changing a setting (channel) on the router and see if the windows 8 laptop will be able to connect. For instructions, refer to this link: Changing the Wireless Channel on a Linksys Router.
By the way, what is the model number of your router?

Artwork doesn't show with version 5.0.1

I updated my ipod with the iOS 5.0.1. The album artwork doesn't show even if they all appears in Itune. Any idea to resolve this problem?

I just ran into the same problem with an iPhone 4S: contact names and photos stopped showing up on incoming calls or in the recent/missed calls list. I took my phone to the Genius Bar and they ran a diagnostic to confirm there was nothing wrong with the phone hardware. Their suggestion, which worked:
Update iTunes to the latest version.
Sync your phone with your computer via iTunes. Make sure that the sync options are selected under each tab (Sync Contacts, Sync Apps, Sync Music, Sync Videos, etc..) so everything is backed up onto the computer.
In iTunes, select the Summary tab for the phone and click on Restore to wipe out the software and restore it.
When the system asks, restore as a new phone (instead of restoring from backup)
Once it's done, walk through the initial phone setup and re-sync your phone to get all of your contacts, apps, music, etc.
The explanation I got was that something in the software got corrupted and if I restored from a backup, the corruption would still be there, so I needed to restore it as a new phone and re-sync my data on to it. Bottom line is it worked, and I hope this saves some time and a trip to the Apple Store for you or anyone else that might run into this issue.
Good luck getting it resolved!
Kendrick

Console.app doesn't show up (window)

Hi,
a week or so after I've upgraded to 10.9.2 my console.app stopped opening any log file and it doesn't show even a (blank) window.
I checked the activity monitor and it seems to be working.
I've typed "tail -f /var/log/system.log" in a terminal window and opened the Console and it showed this lines:
        15 Foundation                          0x00007fff87c187ba -[NSNotificationCenter postNotificationName:object:userInfo:] + 68
        16 AppKit                              0x00007fff8da50cf9 -[NSApplication _postDidFinishNotification] + 289
        17 AppKit                              0x00007fff8da50a2c -[NSApplication _sendFinishLaunchingNotification] + 195
        18 AppKit                              0x00007fff8da4931a _DPSNextEvent + 1238
        19 AppKit                              0x00007fff8da48a2b -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
        20 AppKit                              0x00007fff8da3cb2c -[NSApplication run] + 553
        21 AppKit                              0x00007fff8da27913 NSApplicationMain + 940
        22 libdyld.dylib                       0x00007fff89b0a5fd start + 1
After readind some posts I've deleted com.apple.console* from ~/Library/Preferences and /Library/Preferences but no luck.
Any idea how to solve this issue?

Not sure if this is a typo in your post but:
ref="networkmanagementconsole.jnlp"
should be href= .......
John

Validated comments doesn't show in windows

i've validated some comments in a mac in Adobe Reader XI.
When i've opened the file in a windows with Adobe Reader X, the validated comments aren't validated.
All the checkbox isn't active.

An iPad isn't designed to mount as a drive, it won't show in windows explorer unless you have photos on it that were taken with the iPad, copied to it via the camera connection kit, or were saved from emails/websites - if you do then it should show as a camera, allowing you to copy them off.
If you want to sync content to it then you need to use iTunes on your computer to so do. If you don't have iTunes installed then you can download it from here : http://www.apple.com/itunes/download/
If you haven't synced it to that computer before then you may find this page useful : https://discussions.apple.com/docs/DOC-3141
Syncing with iTunes : http://support.apple.com/kb/HT1386
Syncing media : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
Syncing photos : http://support.apple.com/kb/HT4236

HP Pavilion G6 1006sh external display doesn't work with Windows 8.1

Hi All,
After performing a clean install of Windows 8.1 Professional on my Pavilion G6 1006sh I can not use my external Samsung monitor connected on HDMI port.
The windows install went smoothly without any issues the OS had builtin drives for all of the devices. So there is no unknown hardware in device manager there is sound, wifi, LAN, etc. As for video card I can see two different devices. There is a Generic Windows VGA and there is an AMD Radeon HD 7400M installed. The AMD Catalyst software was installed successfully. In windows graphic properties I can choose from two different video outputs, one is the General Windows VGA the other one is the Radeon. However windows detects monitor connected only on General VGA (which is the inbuilt notebook display) and nothing on Radeon so I can not use my external monitor.
Of course I tried to restart laptop / monitor many times, unplug / plug HDMI cable but no success. When I plug HDMI cable into laptop the monitor displays a message that it is connected but there is no incoming signal. The HDMI port both on monitor and laptop is working I used the same configuration with Windows 7 x64 Professional without any issues. It is only the operating system that changed.
I tried to remove the General VGA device in order to force using Radeon but after restarting there was nothing displayed on the screen, I couldn't see anything neither on inbuilt nor on external monitor so I had to restore a previously saved system configuration.
I tired to install the latest graphic driver to Radeon downloaded from AMD site but Windows crashed and restarted during the install process.
Please help me with this issue or make a statement that this version of Windows is not supported on this machine so I have to revert the previous system.
Configuration:
modell: HP Pavilion G6 1006 SH
RAM: 2x4 GB
OS: Windows 8.1 Professional x64 (HUN)
OS drivers: installed and updated automatically by windows
Antivirus: Symantec Endpoint Protection 12.1
Thanks,
Zoltan
This question was solved.
View Solution.

Hi there @nzole
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you installed Windows 8.1 onto your system, but now you cannot detect an external monitor with HDMI. I am happy to help you with this.
First, in answer to your question, this model is not supported for windows 8.1. It was only sold in versions that were configured for Windows 7. That would mean there are no drivers specifically customized by HP for this model for Windows 8.1. It is possible you could find an appropriate drive from a model that does support Windows 8.1 that may be close enough in terms of hardware, that its driver could work, but there is no guarantee.
Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC
HP Products - What If I Don't See My Operating System?
Do you still have the Recovery partitions, or did you make a set of recovery disks, prior to installing Windows 8.1?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Itunes 10.5.1 doesn't open with windows 7 64 bit

i have just purchased a new HP laptop with windows 7 64bit and have installed itunes. all the files have installed correctly but the program doesnt open. any ideas ?

1. First check if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails, refer to following article to remove SC Info.lib file:
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR.

JTree.linestyle doesn't show with Windows Look&Feel

Similar Messages

Maybe you are looking for