JUDO to windowed .EXE conversion help needed

any ideas buds ahh and 1 last wish
whats the command to make the window size and and i want to divide the table in 2.in the left part user types in the numbers and so and in the right part the result shows
and the left half of the window is blue and right its yellow.thats my last last last wish from u guys.i appreciate your help....i learned some things and well i thank yall.

Have you tried specifying which measure you want it to sum?
e.g.
CASE WHEN ISLEVEL(Entity.CurrentMember, 0) THEN
Last Shipped (PU) x Part Volume
ELSE
SUM(Children(Entity.CurrentMember), [Measure].[Part Volume])
END
also I'm not sure whether the SUM is correct. This might work as it definately specifies the tuples:
SUM({Products.CurrentMember.children},[Measures].[Part Volume])
hope it helps,
Gee

Similar Messages

Recovering windows XP -Urgent help needed

I am new to Toshiba. I hav a 60 GB hard disk with no partition and windows XP home installed. I want to partition the hard disk now. Now after formatting the hard disk do i lose Windows XP HE completely or is there chance to recover it and reinstall it. Urgent help needed.

Hi
You can reinstall your notebook using Recovery CD. It is easiest and fastest way to reinstall OS, all necessary drivers and tools. Put Recovery CD into DVD-ROM, start notebook and press down C button. At the beginning there is choice between two kinds of installation (Standard mode and expert mode).
If you choose the first one whole HDD will be formatted and used for OS installation. With second one (expert mode) it is possible to install OS on first partition. It is also possible to define how big the partition should be.
Try it. It is very simple to do it.
Good luck

Boot-camp/Windows 7 Network Help Needed

I recently installed Windows 7 Ultimate using Bootcamp to my macbook pro from mid-2011 and i installed it fine but its not picking up any wi-fi on windows 7 at all.

So are your drivers installed. Did you download the drivers to a USB or burn to a disc from BootCamp install?
Windows drivers won't work. If all you installed was Windows then you still need to install bootcamp drivers.
If by chance you have installed drivers then I suggest moving closer to router to make sure you have a decent signal. I have to say I have found Windows 7 in BootCamp to have a weaker signal then in OS X. Not sure the reason although several months ago I found that the driver for the WIFi card seems to set power level lower to conserve battery life I suspect. I raised the power level in driver settings and got significantly better signal levels.

11i to r12 Conversion - help needed

Hi
My client is doing re-implementation of r12 and migrating from 11i to r12. I need help particularly on conversions side. The client is a SaaS company. they are considering to bring open and history transactions and applied/unapplied receipts to r12 AR.
- how to migrate revenue scheduled open/closed invoices from 11i to r12 since rev schedules for a SaaS company is expected to be long terms. and how to make sure that rev schedules are correct upon migration to r12??
- for partially paid invoices how to make sure that the same partially paid amount reflects in r12 upon conversion? can a negative line amount equalling to paid amount be a possible solution??
- upon migration do the closed invoices have to be converted as open and receipts re-applied after migration in r12 or they can be brought in as-is with status closed?
- if customer paid for an invoice using a credit card in 11i and upon migration it came to notice that the credit card is no longer used by the customer so how to re-apply the same receipt in r12 which was applied in 11i using that credit card. do we have to enable it in r12 just for closing the invoice? what could be possibilities?
please anyone if can answer would be very helpful
Thanks
-MS

It depends on the dpi. Usually 72dpi = 72 pixels per inch.
1000/72 = 13,88888 inch
1 inch = 25,4 mm
13,88888 * 25,4 = 352,7777 mm
You do the arithmatic with a calculator.
To do the same with pictures, you can do it in any image editor. Even Preview.app :
!http://www.wyodor.net/_Discussions/PreviewResize.png!

Arabic Character set conversion-help needed

We have our main database running in 10g (Solaris o/s) & planning to move these to RAC 11g.
One of our old oracle DB(8.0.5)/solaris, which is not used till recently need to upgrade to 10g Rel2.
I know Supported direct upgrade 8.0.6/8.1.7/9i -> 10g
Current DB: 8.0.5 (Character Set: AR8ISO8859P6)
Target DB : 10g Rel 2 (Character Set: AR8MSWIN1256)
I am thinking to go the following way by using exp/imp
8.0.5(AR8ISO8859P6) -> 8.1.7(AR8ISO8859P6) -> 10G(AR8MSWIN1256)
OR
8.0.5(AR8ISO8859P6) -> 8.1.7(AR8MSWIN1256) -> 10G(AR8MSWIN1256)
please advice
thanks

(1) At source db 8.0.5 (solaris)
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-YY
NLS_DATE_LANGUAGE AMERICAN
NLS_CHARACTERSET AR8ISO8859P6
NLS_SORT BINARY
NLS_NCHAR_CHARACTERSE T AR8ISO8859P6
$set NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6
$exp sys/dba file=full251109.dmp full=y
(2):>> At target db 10g R2 (solaris)
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RRRR
NLS_DATE_LANGUAGE AMERICAN
NLS_CHARACTERSET AR8ISO8859P6
NLS_SORT BINARY
NLS_NCHAR_CHARACTERSET UTF8
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
$export NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6
$imp testdba/testdba file=full251105.dmp fromuser=PROFINAL touser=PROFINAL
*$csscan testdba/testdba FULL=Y FROMCHAR=AR8ISO8859P6 TOCHAR=AR8ISO8859P6 LOG=P6check CAPTURE=Y ARRAY=100000 PROCESS=2*
There is EXCEPTIONAL DATA in .err file+
clients accessing 8.0.5 dataabase uses characterset AR8IS08859P6, which is SAME as 8.0.5 database
-CSSCAN result->>[Database Scan Parameters]
Parameter Value
CSSCAN Version v2.1
Instance Name MIG1
Database Version 10.2.0.1.0
Scan type Full database
Scan CHAR data? YES
Database character set AR8ISO8859P6
FROMCHAR AR8ISO8859P6
TOCHAR AR8ISO8859P6
Scan NCHAR data? NO
Array fetch buffer size 100000
Number of processes 2
Capture convertible data? YES
[Scan Summary]
Some character type data in the data dictionary are not convertible to the new
haracter set Some character type application data are not convertible to the new characters
[Data Dictionary Conversion Summary]
Datatype Changeless Convertible Truncation Lossy
VARCHAR2 2,235,403 0 0 *1,492*
CHAR 1,097 0 0 0
LONG 155,188 0 0 6
CLOB 24,643 0 0 0
VARRAY 21,352 0 0 0
Total 2,437,683 0 0 1,498
Total in percentage 99.939% 0.000% 0.000% 0.061%
The data dictionary can not be safely migrated using the CSALTER script
[Application Data Conversion Summary]
Datatype Changeless Convertible Truncation Lossy
VARCHAR2 16,986,594 0 0 *1,240,383*
CHAR 164,114 0 0 0
LONG 7 0 0 0
CLOB 1 0 0 0
VARRAY 1,436 0 0 0
Total in percentage 93.256% 0.000% 0.000%
6.744%
[Distribution of Convertible, Truncated and Lossy Data by Table]
USER.TABLE Convertible Truncation Lossy
PROFINAL.BASE_MASTER_DATAS 0 0 *362,003*
PROFINAL.CODE_ALLOW 0 0 *53*
PROFINAL.CODE_ALLOWANCE_TYPES 0 0 *1*
PROFINAL.CODE_BONUS_TYPES 0 0 *2*
PROFINAL.CODE_BRANCHES 0 0 *2*
PROFINAL.CODE_CERTIFICATES 0 0 *94*
Kindly help,,,
Edited by: userR12 on Nov 25, 2009 1:43 AM
Edited by: userR12 on Nov 25, 2009 1:52 AM

File Sender Content Conversion: Help needed

Hello Experts,
i need help with file sender content conversion:
i have a file which looks like this:
12329460 24.01.09/07:01 167     Y010122851 136086 43300007            E70115 1L2_96_1
12329660 25.01.09/07:02 157     Y010122851 136086 43390007            E711J5 1L2_96_1
as you can see 8 fields, separated with whitespaces
and i want and xml file which looks like this:
<DT_DATA_FILESENDER>
<Recordset>
      <Data>
        <field1>12329460</field1>
        <field2>24.01.09/07:01</field2>
        <field3>167</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43300007</field6>
        <field7>E70115</field7>
        <field8>1L2_96_1</field8
     </Data>
      <Data>
        <field1>12329660</field1>
        <field2>25.01.09/07:02</field2>
        <field3>157</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43390007</field6>
        <field7>E711J5</field7>
        <field8>1L2_96_1</field8
     </Data>
</Recordset>
Would you please let me know how the datatype has to look like?
And especially how the FCC has to be configured for this scenario?
Thanks in advance,
Chris

> With fixed lengths i get it working,
>
> but with de fieldseparator 0X09 it does not work,
> would you please tell me the complete FCC config not only the fieldSeparation line?
Well Christian,
There is one thing, eithere you can use fieldSeparator or fieldFixedLengths you can not use both together. So in your case do not use fieldSeparator.
The complete FCC is almost same as given in the blog in my previous reply. See the final output in that blog and create your data type accordingly. e.g.
Recordset
------Item 0...unbound
--------Field1 0..1
--------Field2 0..1
--------Field3 0..1
--------Field8 0..1
Regards,
Sarvesh

Conversion help needed.

Hi everybody. I'm new to the forum, and need your assistance.
I've recently purchased a Sony 30GB hardrive camcorder and I'm having
problems editing the movies in iMovie HD. The problem is that the camera
records movies in MPEG2 format, and in order for me to edit anything, I
need to convert the movie into MPEG4 format. I was wondering if anybody
could recomend a third party conversion software 'cause Apple doesn't
have anything like that? (so I've been told). Any help would be much
appreciated.
Thank you very much. Derek
G4 Mac OS X (10.3.9)

Hi kwak,
welcome to the  board
in order … to edit anything, I need to convert the movie into MPEG4 format.
no, you need to convert to "dv", only format storing every frame without (almost) any loss of pic information.. (mpegs are lossy, a delivery format)
choose, in recommended order:
* DVDxDV (free trial, 25$)
* Apple mpeg2 plugin (20$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast6/7 allows converting to dv/import file, hit apple-k

Pixels to mm conversion help needed!

Hi.. it's a long shot, but I am constructing a dummy web page... and need to figure out how to take 1000 pixels and convert to a mm or cm box to do a design in.
Does anyone know how to do that... as web designers say they need a 1000 pixel wide page!
I cant seem to find a conversion tool that gives just measurements...
any help appreciated....
as in iweb i just set it but cant find it in cm either!

It depends on the dpi. Usually 72dpi = 72 pixels per inch.
1000/72 = 13,88888 inch
1 inch = 25,4 mm
13,88888 * 25,4 = 352,7777 mm
You do the arithmatic with a calculator.
To do the same with pictures, you can do it in any image editor. Even Preview.app :
!http://www.wyodor.net/_Discussions/PreviewResize.png!

Download/Open .pdf files with Windows 8.1 - Help needed urgently!

Hi, all. I hope this is not a stupid question, but can someone please help with downloading/opening .pdf files?
I am running Adobe Acrobat XI Pro, latest version (no updates available) on a Windows 8.1 platform. When I attempt to download a .pdf file (ANY .pdf file!), my system gives me this error message -
"Adobe Acrobat does not support Internet Explorer's 64-bit mode. Either install the latest version of Adobe Reader, or disable 64-bit mode in Internet Explorer"
I find this baffling. If I could find a later version of Reader than what I have, I would like to try it - but, Adobe updates tells me I have the latest version of Reader. Also, as above, I have the latest version of Acrobat - if Reader could support 64-bit, surely Acrobat XI Pro could?
Can some kind person please help?

Hi Peter,
(I updated your title, so now help is indeed, "needed," and not "nedded." Been there myself plenty of times.)
In any case, is it possible that you're running Reader X, and have the latest updates of that? If so, please consider downloading Reader XI, and make sure you're running version 11.0.07. And, this document offers instructions for setting up your browser to display PDFs when you're using Acrobat XI or Reader XI: Acrobat Help | Display PDF in browser | Acrobat, Reader XI
Please let us know how it goes.
Best,
Sara

Creating GUI window. Newbie help needed

Hey all this is the first time i am building a GUI box for school. Can you kind of help me out here. I think i am doing this all wrong. Can you point me in the direction of setting up a Blank box just so i can then play with it from there trying to add JButtons, JLabels and all that other stuff. This is what i was trying and i know its way wrong.. haha thanks
import java.io.*;
import javax.swing.*;
public class LetterProgram
public LetterProgram
setTitle("Letter Conversion Program");
setSize(100,50);
setVisible(True);
setDefaultCloseOperation(EXIT_ON_CLOSE);
}

import javax.swing.*;
public class MyJFrame extends JFrame {
private int returnCode = 0;
public MyJFrame () {
public MyJFrame (String title) {
    super (title);
protected void frameInit() {
    super.frameInit();
    setDefaultCloseOperation(EXIT_ON_CLOSE);
}You should start from here.
put every thing u want into ExitableJFrame's constructor.
You will need a main method to creat a JFrame.
and then setVisiable(true); some sort of stuff there.
GOOD LUCK

High CPU usage on all cores by ntoskrnl.exe? Help needed urgently Please.

ntoskrnl.exe, system, has multiple cores running with high usage, locking up my system when using programs.
After looking through the forums I did the following:
I ran
sfc /scannow but nothing found.
I used process Explorer to find that the system has a thread <ntoskrnl.exe!TtlSid HashLookup+0x 1ffc> that
is using up 40+% of all four cpu cores. Looks like a driver fault with 8.1, but cannot pinpoint the device. Any clues msg me.
I have created an etl file that contains usage data. this is present here:
https://dl.dropboxusercontent.com/u/8554814/highCPUUsage.zip
Would be a lot of help if this can be resolved. please help.

forgot to ask, may I know your PC model?
mostly is related to the network, networking software, or software which need internet connection
did you already updated all the network driver?
is there any networking software or downloaded software? may I know your antivirus status? firewall?
try clean boot and go to safemode to check, choose safe mode only, safe mode with networking and normal mode without internet (unplug cable or disconnect Wifi)

Pricing : ABAP to Java conversion help needed

Hi all.
I am basically an ABAP developer. My recent assignment needs some java coding.
It will be very helpful if we anybody helps me in finding the corresponding pricing fields in java.
The abap code is as follows
check : xkomv - kgrpe = ' '.
check: xkomv - xkbetr ne 0.
check : komp - kpein ne 0.
if komp - netwr < 0.
komp - netpr = 0 - komp - netpr.
endif.
xkwert = (        ( ( komp - netpr * ( 100000 + xkomv - xkbetr))     / 100000)
komp-mglme / komp-kumza * komp - kumne / 1000 / komp - kpein )
- komp-netwr.
Please help in converting this abap code to its corresponding java code.
Thanks and Regards
Deepika

Here is the code I have developed: Please check and let me know if there are any changes
import java.math.BigDecimal;
import com.sap.spe.pricing.customizing.PricingCustomizingConstants;
import com.sap.spe.pricing.transactiondata.PricingTransactiondataConstants;
import com.sap.spe.pricing.transactiondata.userexit.IPricingConditionUserExit;
import com.sap.spe.pricing.transactiondata.userexit.IPricingItemUserExit;
import com.sap.spe.pricing.transactiondata.userexit.ValueFormulaAdapter;
public class ZS2S_IPC_ZDCP extends ValueFormulaAdapter {
      public BigDecimal overwriteConditionValue(
            IPricingItemUserExit item,
            IPricingConditionUserExit condition) {
            BigDecimal kompKumza = new BigDecimal(String.valueOf(condition.getFraction().getNumerator()));
            BigDecimal kompKumne = new BigDecimal(String.valueOf(condition.getFraction().getDenominator()));
            boolean xkomvKgrpe = condition.isGroupCondition();
            BigDecimal kompKpein = condition.getPricingUnit().getValue();
            BigDecimal kompNetwr = item.getNetValue().getValue();
            BigDecimal kompNetpr = item.getNetPrice().getValue();
            BigDecimal xkomvKbetr = condition.getConditionRate().getValue();
            BigDecimal kompMglme = item.getBaseQuantity().getValue();
              if ( xkomvKgrpe = true )
                  return PricingTransactiondataConstants.ZERO;
              if ( kompKumza != PricingTransactiondataConstants.ZERO )
                return PricingTransactiondataConstants.ZERO;
            if ( kompKumne != PricingTransactiondataConstants.ZERO )
                  return PricingTransactiondataConstants.ZERO;
            if ( kompKpein != PricingTransactiondataConstants.ZERO )
                    return PricingTransactiondataConstants.ZERO;
            if (kompNetwr.compareTo(PricingTransactiondataConstants.ZERO) < 0 )
                  kompNetpr = (PricingTransactiondataConstants.ZERO).subtract(kompNetwr);
             BigDecimal y = new BigDecimal("100000");
            BigDecimal a = y.add(xkomvKbetr);
            BigDecimal temp = kompNetpr.multiply(a);
            BigDecimal result1 = temp.divide(y, 2, BigDecimal.ROUND_HALF_UP);
            BigDecimal result2 = result1.multiply(kompMglme)
                                     .divide(kompKumza, 2 BigDecimal.ROUND_HALF_UP).multiply(kompKumne).divide(kompKpein, 2, BigDecimal.ROUND_HALF_UP);
            BigDecimal Result = result2.subtract(kompNetwr);
          return Result;
Edited by: Deepika Mallya on Aug 6, 2009 9:08 AM

Html to wml conversion help needed urgently

Hello everybody,
I need static HTML to WML code urgently as soon as possible.
Can please somebody help.
Moreover, how to discard the tags in HTML which are not in WML.The problem is that few tags are not mandatory to close.So, what should be the rule of discarding tags?
Please help!!!!
iwapsms

http://www.google.co.uk/search?q=html+2+wml&start=0&ie=utf-8&oe=utf-8

RecordSet to Cusror Conversion Help Needed

Hi,
I have a Perl Code which calls a Stored Procedure in Oracle 8i Database. As you know that you can return Cursors
and other data types back to Perl and not RecordSets. So I am trying to convert a RecordSet to a Cursor. The Stored
Procedure Does some complex computations and then stores the results in a record Set. I need to tansfer the data
from the Record Set back to the Perl Code via a REF Cusror. The only solution that I can think of is Creating a Temp
Table to store the results and then point a Cursor to that and return that Cusror to the Perl Code. Is there any other
way of doing this???. I searched lot of sites/forums, But couldnt find any solution.
You Help will be greatly appreciated :).
Thanks
Rajesh

Hi Rajesh,
i too had the same requirement but using Java Code.
One way to return a Cursor to the code is using a package.
the query which returns the recordset is to be assigned to a ref cursor. For eg.
CREATE OR REPLACE PACKAGE PKG_PLAN AS
TYPE RESULT IS REF CURSOR;
PROCEDURE USERDETAILS2 (
O_RESULT OUT RESULT
END PKG_PLAN;
CREATE OR REPLACE PACKAGE BODY PKG_PLAN AS
PROCEDURE USERDETAILS2(
O_RESULT OUT RESULT
AS
BEGIN
OPEN O_RESULT FOR SELECT DISTINCT US_FIRSTNAME AS UserName,
US_COMPANYNAME AS Company, TBLUSER.US_PRIMARYEMAIL AS EmailId ,
FROM
TBLUSER where
TBLUSER.US_STATUS = 'A' ORDER BY UserName;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('INSIDE EXCEPTION');
END USERDETAILS2;
END PKG_PLAN;
and in the perl code u will invoke the procedure as
CALL PKG_PLAN.USERDETAILS2(?)
where ? is the out parameter -of type cursor which is to be
registered via perl code.(not sure how it is done in perl)
and after issuing execute command via perl code
get the resultset.
hope u understood it and the above was of help.
Good luck
Rani
Hi,
I have a Perl Code which calls a Stored Procedure in Oracle 8i Database. As you know that you can return Cursors
and other data types back to Perl and not RecordSets. So I am trying to convert a RecordSet to a Cursor. The Stored
Procedure Does some complex computations and then stores the results in a record Set. I need to tansfer the data
from the Record Set back to the Perl Code via a REF Cusror. The only solution that I can think of is Creating a Temp
Table to store the results and then point a Cursor to that and return that Cusror to the Perl Code. Is there any other
way of doing this???. I searched lot of sites/forums, But couldnt find any solution.
You Help will be greatly appreciated :).
Thanks
Rajesh

Mapping conversion help needed for date

Hi Experts,
I need help in message mapping convesion for date field
The source date field can have value '2010-06-04T02:09:59.610-07:00' or 2010-06-04T02:09:60.610-07:00
I have to change it to '2010-06-04T02:09:59.000-07:00'. ie, if the seconds are 59.XXX, or 60.XXX, then change to 59.000.
Please let me know the best way to do this
Thanks
Mike

Again, to make it more clear
The source date field can have any date value such as
2010-06-04T02:09:59.610-07:00 -
This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.610-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.000-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:59.000-07:00 - This need not be changed
2010-06-04T02:09:58.610-07:00 -- This need not be changed
2010-06-04T02:09:57.610-07:00 etc etc - These need not be changed.
The only change using date function is for the first two dates, in which 59.XXX and 60.XXX need to be replaced with 59.000
Using the above date function, all the seconds 59.XXX, 58.XXX, 60.XXX, etc etc,,, are converted to 59.000, 58.000 and 60.000
I dont need this as per the requirement. So looks like the UDF needs to be altered a little to accomodate my requirement.
Please help me.
Thanks
Mike

JUDO to windowed .EXE conversion help needed

Similar Messages

Maybe you are looking for