Jukebox 20 gig has "critical error" could not detect HDD shutting d

I just powered the 20 gig up, and the critical error message apeared. Is there anything I can do?

Poking around a little more I see some suggestions about this error being caused when the batteries are too low. I was actually trying to use it plugged in but without batteries. I had put it away and so I took the batteries out. If these batteries don't work can I use regular alkaline batteries? If the HDD is actually bad (I found out that the article that used to be on nomadness.com was about how to replace the HDD) I'm just going to chuck it, but I'd like to see if it can be solved by charging or replacing the batteries.
Thanks

Similar Messages

Nomad model# DAPAGO1 "Could not detect HDD" error

;Hello,
I see that other people have posted this question but I haven't found any answers. Apparently there was an article about this error on a site called nomadness.com, but that site is now gone. However, the fact that there was an article about it leads me to believe that there may be a solution.
Any help?
The error message I get when I turn it on is:
Critical Error
Could not detect HDD
Shutting down
Thanks

Poking around a little more I see some suggestions about this error being caused when the batteries are too low. I was actually trying to use it plugged in but without batteries. I had put it away and so I took the batteries out. If these batteries don't work can I use regular alkaline batteries? If the HDD is actually bad (I found out that the article that used to be on nomadness.com was about how to replace the HDD) I'm just going to chuck it, but I'd like to see if it can be solved by charging or replacing the batteries.
Thanks

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know wha

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

Photoshop CS6 error "could not complete ... too many files open. Try closing........." with 3D psd?

Im working in a .psd file with multiple 3D layers. The file size totals at 356mb.
When opening the file, I get this error: "could not complete your request because there are too many files open. Try closing some windows and try again." This doesn't any sense to me, as I was not experiencing any chugging when the file was open, and I am on a relatively fast system.
Win 7 64bit
Intel i7-2760QM @ 2.4GHz (8 CPU)
16 gigs ram
Nvidia GTX 560M (2752mb)

Having the same issue on the Mac!
Worked on a file yesterday, fairly big, but nothing that I haven't handled before... Only difference was the 3DS file I imported has over 270 textures.
I think there is a limit on how many textures can be imported, essentially corrupting the file on save. It would be a lot more helpful to have Photoshop warn us that the 3D model is too complicated before we import it and save our work looking forward to finishing off the next day.
I tried the same model again today, did nothing other than position it and render it, then saved, same error on opeing: "Could not complete your request because there are too many files open. Try closing some windows and try again."
If anyone at Adobe would like to have a look ta the file the smaller version that I did today I can upload somewhere or send a YouSendIt.
Cheers.

EAS server error: Could not connect to administration Server

Hi,
I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
"Server Error: Could not connect to administration server".
I tried accessing the same through the web URL and I found "404 error - file or directory not found".
I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
The log retireved from the HyS9eas-sysout.log file is below:
<Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
<Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp not referenced from EAS#11.1.2.0
Application name: EAS#11.1.2.0
Application source: eas.ear
Server name: EssbaseAdminServices0
Server port: 10080
Server SSL port: 10083
Application context: eas
Registry product type: ESSBASE_PRODUCT
Registry physical web application type: ADMIN_SERVICES_WEB_APP
weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for EAS#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
<Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
>
<Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 05:12:27 JST 2002,
               To: Wed Mar 23 05:12:27 JST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
Kindly help me out in solving this issue.
Thanks in advance.
Regards,
Balaji P

Hi John,
Sorry for replying late.
I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
When i looked in to the Config tool.log,I got the following messages.
[2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
[2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
java.lang.NullPointerException
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
at java.lang.Thread.run(Thread.java:619)
Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
Appreciates your help.
Thanks & Regards,
Balaji P

CS6 Error: "Could not complete your request because of a program error."

I get the error "Could not complete your request because of a program error." anytime I try to open a .psd file someone has sent me.
This error is occuring in CS6.
Anything I can do?

Hi Basedcade,
Do you know what version of Photoshop was used to create the .psd they are sending? II'd want to make sure the person sending the .psd is selecting the option to maximize compatibility when saving the .psd file. How is the person sending you the .psd file, email, etc.? Does the person sending it have an Adobe ID? If so, maybe have them upload the .psd and share it via Creative Cloud to see if it does the same thing when transferred that way?
-Dave

Session closed due to Error: Could not Resolve hos...

Hi,
I''m trying to sort out connection issues for my auntie. She has a BT Homehub 5 with the latest firmware.
However, she is suffering from reboots and lost connections all the time. I have reviewed the log files and it is full of the following messages:
74.270000 CWMP Session closed due to error: Could not resolve host
Any ideas as i am stumped. Its a fairly recent installation ( 4 months or so) and she has only recently started to use the Wifi. It was ok when wired.
Simon

If it is DEFINITELY a wireless problem only, then download InSSider and run the program. This will tell you if you have are using a congested wifi channel.......
You can then go into the settings and after picking a less congested channel, turn off the "smart wireless" setting.....
Although the wireless problem wouldn't cause the rebooting problem......
If you found this post helpful, then please click the star on the left, after all, I'm only trying to help........

Eclipse give following error :could not find Java 2 runtime environment

When I try to start eclipse it is giving me following error could not find Java 2 runtime environment.It was working fine untill I installed a new verson of eclipse although I am not whethar that is the source of problem.
When i give java -version command in command prompt it shows
Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
has value '1.4', but '1.6' is required.
Error: could not find java.dll
Error: could not find Java 2 Runtime Environment.
My java Home ,classpath , and path are all set as I say it was earliar woking fine.
Please Help.

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]

I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
Applying 10.245.33.37_cinder.pp
10.245.33.37_keystone.pp:                         [ ERROR ]
Applying Puppet manifests                         [ ERROR ]
ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
Additional information:
* A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
* Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
* Did not create a cinder volume group, one already existed
* File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
* To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
Packages:
[root@slcai461 ~]# rpm -qa|grep keystone
python-keystoneclient-0.9.0-5.el6.noarch
python-keystone-2014.1.3-2.el6.noarch
openstack-keystone-2014.1.3-2.el6.noarch
[root@slcai461 ~]# rpm -qa|grep packstack
openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
Log :
[root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
   (at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Wrapped exception:
Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
Notice: Finished catalog run in 3.10 seconds
Please let me know how to fix this.

This problem connected with proxy-setings.
As the first steps you should try:
       1. export system env variable:
http_proxy=http://www-proxy.ru.oracle.com:80
https_proxy=https://www-proxy.ru.oracle.com:80
no_proxy=127.0.0.1,localhost
and you can also export
    export OS_TENANT_NAME=admin
    export OS_USERNAME=admin
    export OS_PASSWORD=root
    export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to Openstack dashboard.

Error: Could not continue scan with nolock due to data movement, DBCC proccache will clear the probelm

SQL Server: 2008 R2 SP2
Before describing my problem, I have gone via the forum, there is no view or functions inside my stored procedure
When running a particular stored procedure inside crystal report, the error " Could not continue scan with nolock due to data movement" comes once every few weeks. After I clear the query cache plan, it works again for few weeks and the problem
comes again. During these few weeks, there is no restart or query plan clearing.
If I run the stored procedure inside SSMS, where the SQL statement is copied and pasted from SQL profiler during crystal report run, there is no error.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler, I have actually saved the query plans. Unfortunately, this forum does not accept attachments, or otherwise I will post my query plans
here.
There is one thing I notice about the query plan is during nested loop operation, there is a warning "no join predicate". I don't use any views or UDF in the statement, nor did I use pre-1992 ANSI join syntax. However, I did use table variables.
My guess is whether this will cause " Could not continue scan with nolock due to data movement", after I clear the cache, I run crystal report again, and I look at the plan again, the "nested loop no join predicate" warning is gone.
Running this stored procedure took 1 second maximum, even when this error is popping up, it pop up within 1 second.
DBCC checkdb has been run
The same stored procedure running by crystal report in a SQL 2008 (non r2) live environment has no problems, so I am thinking this is R2 specific problems.
The "nested loop no join predicate" error SQL statment is below, no views, no udf, but table variables
INSERT @ChequeAccount
SELECT       PS.PaySummaryID, PS.EmployeeID, PS.CostCentreID,
           (PS.GrossPay   + PS.LumpSumA + PS.LumpSumB   + PS.LumpSumD+ PS.LumpSumE+ PS.ETP+ PS.PaymentsAfterTax   - PS.DeductionsAfterTax
- PS.Tax- PS.ETPTax   + PS.TaxRebate) * -1 AS Amount,
           CGLM.GLAccountID
FROM Pay_Summary PS JOIN Input_Sheet ISH ON PS.InputSheetID = ISH.InputSheetID AND ISH.PayrollID = @binPayrollID
AND PS.PaySummaryID NOT IN (SELECT PaySummaryID FROM @ChequeAccount)
JOIN Payroll P ON P.PayrollID = ISH.PayrollID AND P.EmployerID = @binEmployerID
JOIN CustomGLFixMapping CGLM ON CGLM.EmployerID = P.EmployerID AND CustomGLFixMappingNameID = 1 AND CGLM.CostCentreID IS NULL

The error Could not continue scan with nolock due to data movement can occur when you use the NOLOCK table hint, or use the command SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED. That is, so-called dirty reads. The error is not related to the
query plan per se, but when scanning a table, the storage engine will use an IAM scan rather than following the clustered index. If there is simultaneous activity, the storage engine may detect this and abort the operation to avoid returning incorrect data.
Or it may not detect it, and return uncommitted data or fail to return committed data.
All of these effects are transitory and they will not show up when you are alone on the system, only when there is concurrent activity in one or more of the tables in the query.
Using dirty reads is a risky business for the reasons explained above, and it takes careful analysis to understand whether you can live with the errors you can get from a particular query. The error about data movement can be handled: trap the error and
resubmit the query. But what about spurious incorrect results?
If you believe locking to be a problem, you should consider setting the database to READ_COMMITTED_SNAPSHOT
and take out all use of READ UNCOMMITTED/NOLOCK. When the database is in READ_COMMITTED_SNAPSHOT, readers read from the snapshot and only see committed data without blocking writers. This has some other effects like requiring a bigger tempdb,
and there is a risk for other types of concurrency errors, but they tend to be smaller risks.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler,
This is because SSMS by default runs with SET ARITHABORT ON. I discuss this in more detail in this article on my web site:
http://www.sommarskog.se/query-plan-mysteries.html
However, as I said, this problem is not related to the query plan as such, although some query plans are more susceptible to this error than others. (All plans are suscpeitble to produce incorrect results).
Erland Sommarskog, SQL Server MVP, [email protected]

Layer Comps To Files - Export error: Could not complete this operation. There are no user slices

I have been using the Export Layer Comps To Files scrips that ships with Adobe Photoshop CS5 for a while and found it very useful, apart from the numbers it automatically adds as a prefix to the layercomp name.
A friend pointed me in the direction of a altered version of this scrips which removes the numbers and only exports the layer comp name, gerat I thought. Not great! After using this successfully for a while the scrip started to throw up errors whenever I attempted to export. Either "No layer comps found" or "Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices." As I knew there were layercomps for the first error and knew that I had not created any slices for the second error I was pretty miffed. Fortunately I had the foresight to make a copy of the original script from the Photoshop presets library.
I have since deleted the offending script out of my presets folder and copied the original script back in however the error still persists. I constantly receive Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices. I have searched the forums and around the net to try and find a solution for this problem but none seem to present themselves. I am perplex how this error can persist when the original script is now being used.
If there's is anyone out there who can help me resolve this I'd be most grateful. As I say I've tried to resolve this myself and am pretty computer savvy but this one has defeated me
Thanks in advance

The problem seems to be already solved, but I'm commenting this for future reference.
This has happened to me too and I think I know what causes it.
It happens when you...
1) Do "Save for Web" with the "All User Slices" selected in the dropdown menu "Slices".
(This can only be done with a file that has a user slice)
2) Then try to use the "Layer Comp to Files" script to a file that doesn't have any slices.
To avoid this you need to once open a file that "has" a user slice and save with
the "All Slices" option in the "Slices" menu and then go back to the file you want
to run the script to.
When you run the script, the saved "Slices" option from the previous export seems to
be used and causes an error when there are no user slice.
I also found a fix to the script to avoid this error to come out.
This can be also applied to the fix to "remove the numbers" added to the head of the
exported file names.
The number removal script goes something like this...
var fileNameBody = exportInfo.fileNamePrefix;
if (fileNameBody != "") fileNameBody += "_";
fileNameBody += compRef.name;
this should replace the "Layer Comps to Files.jsx" lines 188-190.
In addition to that, the script below needs to be added below line 818 and line 863.
(This line numbers are those before any alterations to the "Layer Comps to Files.jsx" script)
var idSWsl = charIDToTypeID( "SWsl" );
var idSTsl = charIDToTypeID( "STsl" );
var idSLAl = charIDToTypeID( "SLAl" );
desc4.putEnumerated( idSWsl, idSTsl, idSLAl );
The line right above where the above script should be inserted should read as the following...
desc4.putPath( id44, new File( exportInfo.destination + "/" + fileNameBody + ".png") );
Actually it can be added any where after the "desc4" variable is declared but I specified just
to make it simple.
This sets the "Save for Web" "Slices" settings to "All User Slices".

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Error "Could not open [filename]...Please upgrade your plug-ins

A collegue send us an CS4 InDesign file and when I opened, it says this:
Error "Could not open [filename]. Please upgrade your plug-ins to their latest versions or upgrade to the latest of Adobe InDesign."
Any suggestion? I also have CS4 installed.

I see. Thanks for the help. I just confirmed with the sender of this file and it seems that she has CS5 installed. So, I can that you're right that it's a CS5 file.
Thanks, again.

Entourage error 'could not open that feature end of file reached

When opening Entourage I received the error 'Could not open that feature. End of file reached' I tried Utility and rebuild. when attempting to rebuild a pane came up stating 'preparing to rebuild 0 of 0' and the pane has been stuck there for 8 hours. Every other office product works though. any ideas?

Contact Microsoft for support. That's not an Apple product.

Error: Could not complete Create LOV Dialog Window...

Using Jdeveloper 10.1.2 UIX to drop a MessageLovInput onto an Input Form I get the following error:
Could not complete Create LOV Dialog Window because it would result in an invalid document.
Clicking on details reveals the following:
oracle.bali.xml.model.XmlInvalidOnCommitException: Errors
Errors:
Element text not defined in parent contents [node = text ]
invalid subtree:
<contents>
<text text="Find the collection (which contains the legal values for the lovInput) in the Data Control Palette. Select the attribute (of the collection) that will be set by the lovInput and drop it into this space as a 'LOV Table'. " />
</contents>
     at oracle.bali.xml.model.XmlModel._validateSubtree(XmlModel.java:2646)
     at oracle.bali.xml.model.XmlModel._validateDocument(XmlModel.java:2583)
     at oracle.bali.xml.model.XmlModel.precommitTransaction(XmlModel.java:1467)
     at oracle.bali.xml.model.XmlModel._validateInCommit(XmlModel.java:2538)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:531)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:516)
     at oracle.cabo.ide.adf.LovModelXml._createLovPage(LovModelXml.java:125)
     at oracle.cabo.ide.adf.LovModelXml.createControl(LovModelXml.java:55)
     at oracle.cabo.ide.adf.UixModelXml.populateFragment(UixModelXml.java:165)
     at oracle.cabo.ide.adf.UixAdfDocumentFragmentProvider.preInitializeNode(UixAdfDocumentFragmentProvider.java:38)
     at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider._createDomNodeFromKey(XmlKeyDocumentFragmentProvider.java:97)
     at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider.createFragment(XmlKeyDocumentFragmentProvider.java:38)
     at oracle.bali.xml.model.XmlModel.getImportedDocumentFragment(XmlModel.java:1771)
     at oracle.bali.xml.model.XmlModel.getFragmentForImportIfPossible(XmlModel.java:1801)
     at oracle.bali.xml.model.XmlModel.importData(XmlModel.java:1078)
     at oracle.bali.xml.model.XmlView.importData(XmlView.java:773)
     at oracle.bali.xml.gui.swing.dnd.ModelDropHandler._transferData(ModelDropHandler.java:624)
     at oracle.bali.xml.gui.swing.dnd.ModelDropHandler.drop(ModelDropHandler.java:235)
     at java.awt.dnd.DropTarget.drop(DropTarget.java:398)
     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:542)
     at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextPeer.java:52)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:805)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:743)
     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)
     at java.awt.Component.dispatchEventImpl(Component.java:3494)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:3269)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Opening the UIX page, the following code has been generated; not a <listOfValues> tag in sight!
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<form name="form0">
</form>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
I have checked Metalink but can't find this error there either. Based on examples on OTN I have tried to create the LOV window manually but it does not work as expected:
1) The window is not empty when opened - i.e. data has been retrieved.
2) The filtering does not work.
3) The selected value does not update the Input Form.
I have pasted the code below in case anyone can point me in the right direction to work around the Jdeveloper error. However, I think Jdeveloper should create the LOV window correctly.
Thanks in advance for your help.
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40" expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<listOfValues title="Organization"
searchText="Enter search string here">
<contents>

<table model="${bindings.OrganizationView1}" id="OrganizationView13">
<contents>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Name')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Name}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Address')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Address}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Url')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Url}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Phone')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Phone}" columns="10" readOnly="true"/>
</contents>
</column>
</contents>
<tableSelection>
<singleSelection model="${bindings.OrganizationView1Iterator}" text="Select and ">
<primaryClientAction>
<firePartialAction targets="OrganizationView13" source="OrganizationView13" event="select"/>
</primaryClientAction>
</singleSelection>
</tableSelection>
</table>
</contents>
<filterChoice>
<choice name="filterBy">
<contents>
<option text="Name" value="name"/>
<option text="Address" value="address"/>
</contents>
</choice>
</filterChoice>
<headerInstructions>
</headerInstructions>
<searchInstructions>
</searchInstructions>
</listOfValues>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

<event name="goto sort" source="OrganizationView13">
<invoke method="handleTableUiEvent" javaType="oracle.cabo.adf.rt.AdfUtils">
<parameters>
<parameter javaType="oracle.adf.model.binding.DCIteratorBinding" value="${bindings.OrganizationView1Iterator}"/>
<parameter javaType="oracle.cabo.servlet.expl.ControllerImplicitObject" value="${uix}"/>
</parameters>
</invoke>
</event>
<event name="select" source="OrganizationView13">
<set target="${bindings.OrganizationView1Iterator}" property="currentRowIndexInRange" value="${ui:tableSelectedIndex(uix, 'OrganizationView13')}"/>
</event>
<event name="lovFilter">
<compound>
<invoke method="setWhereClause" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}">
<parameters>
<parameter javaType="string" value="${empty param.filterBy ? 'NAME' : param.filterBy} LIKE '${param.searchText}'"/>
</parameters>
</invoke>
<invoke method="executeQuery" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}"/>
</compound>
</event>
</handlers>
</page>

Thanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue.

Jukebox 20 gig has "critical error" could not detect HDD shutting d

Similar Messages

Maybe you are looking for