Jukebox Zen Xtra keeps switching itself

Have got a 30GB Jukebox Zen Xtra (had it since Christmas)...
Everything is fine, except it keeps turning itself on and then playing until I notice it or the battery dies.
I always make sure I have turned it off properly, and the first time it happened I thought that something had pressed on the on/off button accidentally. This was not the case though. Recently, it has been doing it when the player is sat on a flat surface with nothing touching it.
It's getting annoying, as it often plays through the night (when I'm in bed) and when I come to use it on the train in the morning, there's no battery left
Anyone else experienced this or know how to stop it's
Any help appreciated
Thanks
IsoChick
x

) Do you have like a little brother/sister-The might be doing it
2) I dont have one put does it have like a physical hold button that u can switch on when the player is off?
3) I dont have one again so i dont know-But can u take battery out?
4) email support

Similar Messages

  • Zen Xtra plays by itself

    Hi,
    My 40Gb Nomad Jukebox Zen Xtra plays by itself even though I've shut it down. What can I do to stop it doing this?
    Thanks
    Ste

    Kirisame,
    Do you happen to have the player alarm enabled?
    Jason

  • Nomad Jukebox Zen Xtra 60GB not playing correctly anymore, help!!

    Thanks. I keep getting directed to that knowledge base page, but it is not addressing my problem. My computer immediately tells me that the device has "malfunctioned" and the computer does not recognize it. I only have the usb cord that came with the zen, so I don't have another one to try. I love my zen and have staunchly defended it over the years vs. an i-pod. However, this is my 2nd onI've had my Nomad Jukebox Zen Xtra 60GB for over 5+ years. It has worked great, with minimal problems. I had a firmware update issue quite a while back. I'm not sure how to resolve this problem. Here is the situation:
    Nomad Jukebox Zen Xtra 60GB is fully charged and ready to use.
    I tried loading a set playlist but it won't load. So I tried another, and it doesn't load. Not sure what to do, I go to the menu. This time I choose an artist/band. The music loads, but it doesn't play. I try again, then it starts to play. So I load a few other artists that way. It seems like I had a issue to work out later. Being away from my computer that was going to have to wait. After some time the Nomad Jukebox Zen Xtra 60GB started to start N stop diferent songs. A few times it froze while playing a song. Then would unfreeze to play another, then suddenly start playing the previous one. After about 0-5 minutes of this I decided I had enough. So I planned to empty the playlist, and turn it off. It took me atleast three attempts to empty the playlist and turn it off.
    Are these problems fixable What are they hardware or software
    Would an OS or firmware update fix these problems Is my Nomad Jukebox Zen Xtra 60GB hard dri've going Can I get a replacement Or do I need to buy a new player
    Please help me get my player working. I really like this model, I'd hate to have to replace it.
    in 5 years. (The first one fried itself, but fortunately was still under warrantly.) Sadly, I, too, am considering moving on. I onlyreceived generic help fromthe Creative SupportTeam (who ultimately told me my zen is "unrepairable" when their one-size-fits-all solutions didn't work).Since there seems to be an overwhelming # of people experiencing similar problems, maybe the time is right to make the change, especially since an iPod classic 60 GB (7th Generation) is quite affordable these days.
    [/B]

    Formatting will erase all the files on the player,Cleanup scans the disc & corrects file system errors,broken links (from when you delete things)ect. but does NOT repair bad sectors,Reboot then rebuilds the file system. I'd do the Cleanup>Reboot first to see if that solves the problem.here you will find how to open the player to see what dri've is in there. You can then search Ebay or Google the model number to find another one.

  • Nomad Jukebox Zen Xtra 60 GB can't be found through Mediasource Organizer

    I have been using the Creative Nomad Jukebox Zen Xtra HDD Player since a few years and I have always been satisfied. But recently, I had a massi've computer problem, forcing me to do a complete re-install of Windows XP, without the chance to backup my old XP.
    So of course I also needed to reinstall the Nomad Player. However, since I can't find the CD-Rom with the driver, I had to download (almost) everything.
    At first I installed the drivers of the player and then I installed the Nomad Explorer (I still had that one on an old HDD). When I start the Nomad Explorer, the player connects and I can see the music that is stored on the player.
    However, in the past I never used the Nomad Explorer, I always used Media Source Organizer. I think in the past I had Version 3 and later I updated it to Version 5. So now I went for Version instantly. I downloaded it and installed it. But here it starts to get strange. I closed the Nomad Explorer and disconnected the player, then I installed the Organizer. During the installation, I was told that the organizer can't find any supported devices, I should connect and start the player and try again. So I did. This time, the installation finished itself - but when I startet Media Organizer, it couldn't find my player.
    I once read something like that you need at least Windows Media Player 0 or . Since I had 9, I installed 0, but that didn't change a thing.
    So, does anyone have an idea what I am doing wrong ? Or maybe I forgot to install some normal Windows stuff, that is required by Media Organizer ? For example, I haven't installed DirectX yet (but I tell you that just as an example, I don't think that it's DirectX related)

    You need the Creative Nomad Jukebox? plug-in 5.00.22 for Creative MediaSource5 found here.http://support.creative.com/Products...me=MP3+Players

  • Nomad Jukebox Zen Xtra connection probl

    Hello Everyone.
    First off, I am using Nomad Jukebox Zen Xtra (30G) with Windows XP - SP2. A few days ago my Zen Xtra would connect to my pc but as of today it no longer does. After searching through similar posts I am assuming it's not a problem with my Zen but with my PC. None the less, I did do my best to troubleshoot myself. I downloaded all possible firmware/drivers from Nomadworld.com. However - the firmware upgrade would not complete due to the fact that my device is not connected. I tried connecting my player to other USB ports on my PC - no luck. I used Nomad Explorer to do my transfers and as suggested in the FAQ, I tried downloading others (ie: MediaSource) however these wouldn't install because it could not detect any device. When I go to Device Manager/USB/ my Nomad isn't even listed. I have tried 3 different USB cables. The player isn't locked. Other devices work with the usb cables and port (ie: logitec clicksmart camera)
    So now assuming it is a PC problem, where do I go from now? Thanks in advance for any help you can give me

    Hibbs,
    Thank you for your response. The only thing that comes to mind is k-lite codec pack I downloaded and installed for the Indeo codec needed for my clicksmart 820. I'm not sure if that would have anything to do with the disruption of my device. The camera itself worked but wouldn't record videos until I installed the codec. Everything else to my knowledge is the same. No other new USB devices installed either.

  • Nomad Jukebox Zen Xtra - Battery 3.6v vs. 3

    Hey all - I'm looking to purchase a replacement battery for my 30g Nomad Jukebox Zen Xtra and I've found some cheap ones from ebay (such as this one). The question I have is this: my stock battery is 3.6v but this replacement (which has the same parts number) is rated at 3.7v - is this a problem? Will this damage my player?
    Please let me know what issues this may cause and what successes/failures people have had with replacement batteries.
    Thanks in advance!!!
    Dale

    I found the following discussion on PowerStream.com :
    <A target=_blank><B>Q: What is the difference between the 3.6 volt and the 3.7 volt lithium-ion and lithium-polymer cells?</B>[/url]A. This quesiton has been on my mind for a few months. There is a lot of folklore out there about this. It confused me for two reasons. Firstly, I have never heard of a higher charge voltage for some cells and not others. Secondly, the 3.6 is just a rule-of-thumb average of the battery voltage anyway . The actual voltage varies between 4.2 volts and 3 (or 2.8) volts during the discharge. It doesn't have one voltage. You can't just put a meter on a cell and say "this one is a 3.6 volt cell" or "this one is a 3.7 volt cell."So I asked a friend who has a PhD in battery chemistry and has been designing, testing, and manufacturing lithium ion and li-poly cells for over 5 years. Here is his answer:<I>There is no difference between 3.6V and 3.7V cells. The reasons why people say 3.6V in one case and 3.7V in other cases are due to discharge rate. If you discharge your lithium ion cells with 0.2C rate, the middle point voltage of the cells is 3.7V. If you discharge your lithium ion cells with 2C rate, the middle point voltage of the cells is 3.6V or even lower. The middle point voltage of a lithium ion cells, including Polymer Lithium ion Cells, is between 3.6V and 3.7V, variable upon discharging rate.</I>In other words, it is mostly marketing hype. Now the modern cells tend to keep their voltage higher during discharge than the old ones, so a marketing person could easily say "this makes the average higher, so let's call it a 3.7 volt cell."But why stop there? Why not rate the voltage as the peak voltage and get the jump on everybody? "It's a 4.2 volt cell, demand nothing less!"So don't get caught up with the hype when selecting a batteryMessage Edited by RobertoV05 on 0--2006 2:37 AM

  • Nomad Jukebox Zen Xtra 60gp prob

    Well, to start off with, I loved my mp3 player. So far, I ran into problems that I could not fix. I downloaded all of the updates that were needed. My mp3 player, a Nomad Jukebox Zen Xtra 60gb, suddenly would not work the same way. When the power adapter of battery are inserted, the player starts up. When they are pulled the player shuts down. One of the problems is when the player is on, it doesn't want to leave the main screen that says, "EAX". The hard dri've is not spinning, and no data is being accessed. I found on this website a page that tells users how to reset their mp3 player. For my mp3 player, it must be turned off for me to do a hard disk check, re-installation of operating system, or a format of the hard dri've...which is another problem, because I cannot turn it off. As I stated previously, the player is either on or off depending on if the battery is in or not. I am totally puzzeled. I cannot connect the player to the computer because of this problem. So either I have a new 60gb laptop hard dri've, or I figure out a way to get this to work. I haven't been able to find any threads like this or any users experiencing these problems.
    Any help is greatly appreciated.
    -Matt

    Ok... I think I figured it out. I finally got into the recovery mode. I let the battery sit out of the mp3 player for a while, hoping that there is a capacitor that would run out of power. I put the battery back in and got into recovery mode. I ran disk clean up. Nothing changed. I had the same problem I first started off with. So I took the battery out again for an hour. Came back, and got back into recovery mode. I reinstalled the OS. Everything seems to be working fine.
    I hope that anyone having a similar problem with this mp3 player can keep this in the back of their mind if they cannot get into recovery mode due to a boot up and shut down problem.
    -Matt

  • No power after firmware upgrade on nomad jukebox zen xtra

    I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

    I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

  • Jukebox Zen Xtra 60GB - power probl

    I've got a Jukebox Zen Xtra 60 GB and, having tried everything else, I'm fairly certain the power adapter has failed. I can't seem to find reference to the model I've got (Creative Switching Adapter TESA3-050500) so that I can get a replacement. Has this been superceded? And if so, which one do I need to get?

    A quick search on Google came up with this, hope it hel
    ps.
    http://shopping.kelkoo.co.uk/b/a/ss_..._creative.html
    J

  • Jukebox Zen Xtra sound prob

    Hi, I've had my Nomad Jukebox Zen Xtra for more than 2 years and have had little problems with it. However, now I cannot get any sound out of the left speaker of any type of speaker/earphones I plug into the audiojack. This is not a speaker/earphone problem, they work with any audio equipment. I can get sound out of both left and right speakers/phones if I plug the jack only 80% into the audiojack. But if I plug the jack all the way into the player, only the right speaker/phone works. Any suggestions as to how to fix this problem?

    Hello There,
    I am experiencing the exact same problem - "Device not connected, even though I can see the device as a virtual dri've on my XP SP2 PC. I have contacted creative tech support and followed their instructions to the letter with no success.
    Creative tech support instructed me to try the following:
    <FONT face=Verdana color=#06082c size=2>MaKe sure that my antivirus software, firewall and spy ware is turned off. Their thinking was that some services are effect the connection between the MP3 device and USB port.</LI>
    <FONT face=Verdana color=#06082c size=2>Also I tried booting my XP PC in safe mode, ensuring the most of the services were turned off .. i.e. firewall, virus protection, etc. Still can not get the device to connect.</LI>
    align=center><FONT face=Verdana color=#06082c size=2>The Error message on the Device itself (Zen Xtra display) reads as follows:Firmware error on reboot -- error message simply states "firmware problem" then goes to Rescue Mode v.3 - Boot v.4, HW v0.0.displays following 4 options: Clean Up2: Format all3: Reload OS4: RebootTried all four options and still getting same error message.
    <FONT face=Verdana color=#06082c size=2>I am going to try and load the original firmware that came with Zen Xtra, if that works I will try to upgrade the firmware to the latest release.
    <FONT face=Verdana color=#06082c size=2>Later tonight I will get a chance to attempt these actions. <FONT face=Verdana color=#06082c size=2>I will post my results later.
    Message Edited by marcula on 0-24-2006 07:02 AM

  • Nomad Jukebox Zen Xtra Question...Please help me!!

    Has anyone ever gotten the rescue mode screen version .3 on their Jukebox Zen Xtra? If so, what do I do to save all my files on it's Thank You so much in advance...

    If you're getting rescue mode then chances are there's a problem with the hard disk, which also means that it's unlikely you'll be able to recover your tracks. It's vital to keep a backup of your player if the tracks are important to you.
    However, you can try the disk cleanup option in rescue mode to see if this provokes any response from the player.

  • Missing Songs on Nomad Jukebox Zen Xtra - 40GB. Player empty but space not 1

    I have the Nomad Jukebox Zen Xtra 40GB.
    Over the last couple of weeks I?ve been slowly ripping my CDs, using Creative MediaSource and then adding them to my Nomad player. Recently, I went to turn on my player and notice it saying ?rebuilding library?. I thought nothing of it.<SPAN> I then went to see how many songs and albums were on the player and from what I could tell it looked like a lot less than what I thought I had copied over. The songs were something like 3750 and the number of albums was something like 350, which was far less than what I thought it should be but was not 00% for sure.<SPAN> Total free space was something like 7800MB.
    Anyway, yesterday, I tried to copy over some new songs that I had just ripped from CDs.<SPAN> ? of the way through the battery died on the Zen player so it stopped transferring. I went to charge the player and when turned it on the player said ?rebuilding library?. There should, at this point, had been 4500+ songs.<SPAN> I went and tried to copy over the files again, from my computer, and noticed that the songs that I had just copied and would have been skipped, were being copied over again. When I went to check Settings, About the player said I had the ~3750 songs plus the additional songs that had just copied over. At this point I just copied over the new songs bringing my total count to 4634. To be safe, I copied all the songs from my Zen back to a new computer, using Creative MediaSource. After copying over all the files, I then tried a reset of the player, thinking this would delete all the files on the Zen. Instead it did the ?rebuilding library?.<SPAN> When I went back to Settings, About, on the Zen player, it again said there was the ~3750 songs and ~350 albums.<SPAN> So the ?rebuilding library? on my Zen player keeps on removing/hiding my songs and albums.
    Since nothing was working, I connected my Zen to my computer again and using the Creative MediaSource deleted all the songs on my Zen player. When I was done it is showing No. of Tracks: 0.<SPAN> Total Memory:<SPAN> 3833MB.<SPAN> Free Memory though is only 8659MB.
    There is nothing on my Zen player that I can see. Even using Windows Explorer and Nomad Explorer, it is completely blank.
    Someone help please.<SPAN> How do I get back my missing songs and/or reset the player? If at all possible I?d like to get the missing songs off the player since I don?t have those ripped songs on my computer and don?t feel like ripping all those songs again.<SPAN> What is going on?

    PaulS7 wrote:
    Thank you. I'm trying that now. I see that I can reload the OS (Firmware). Does anyone know where I can find out what the latest firmware is to see if I need to upgrade? How do I find out what the latest firmware is and where do I go to upgrade?
    Make sure to read the FAQ post. All downloads are got from Nomadworld.com downloads.

  • No driver found - Nomad Jukebox Zen Xtra - WinXP

    I have used my Zen Xtra for over 2 years now, with the same PC I am currently having problems with. I recently had to do a complete reinstall of Windows (note that I have done at least 2 other complete reinstalls during the life of my Zen Xtra, with no problems). Windows Device Managers sees the NOMAD Jukebox Zen Xtra, but with the yellow question mark and exclamation point. Each attempt at driver installation results in the same problem. The driver ("JB3MV2_PCWDRV_US__30_03.EXE") installs completely, I'm told to reconnect my device so the driver can take effect. When I do, the device is still marked in Device Manager with exclamation point and yellow question mark, and Windows continues to ask if it can find and install the driver. I have told it not to (knowing that I just installed Creative's own driver), with no success, and other times let Windows try to install the driver (hoping it would find the Creative driver that was just installed). No luck. I have even done another complete reinstall of Windows, and tried to install the driver before any other program or hardware installations into my system. No luck. Note that there are no hardware changes between now and when I have done other complete Windows reinstallations. It just no longer accepts the Creative driver. I have also tried to install the driver in safe mode, with the same results. I have also completely removed the Zen Xtra (showing hidden devices in the Device Manager), and tried to reinstall. Firmware version of Zen Xtra was upgraded over a year ago to 2.0.03.
    Specifics:
    Windows XP Pro SP2
    38GB free hard dri've space
    Zen Xtra firmware version: 2.0.03

    I have the same problem. But when i try to installl it it says he is missing an .nfo file.
    I removed WMP and reinstalled WM0 because is crap.
    I have Windows XP SP2
    I have the newst firmware on it.
    Can somebody help me with this because it's annoying not to put any new music on your mp3 player.
    I never experienced this before even after formatting my HD.
    Almost the same problem as fritzm but not completely because het gets an different error.
    I have installed the CD but that doesnt work either.
    I have installed the software from the website but that didnt help because he doesnt recognize my player.
    Please help!!

  • Nomad Jukebox Zen Xtra stops working with XP following Windows Media Player 11 Beta Installat

    Yesterday I was very pleased to find that my Creative Zen Xtra (model DAP-HD00) portable media player is a PlaysForSure capable device. Creative Labs, on November 9, 2005, released the Creative Zen Xtra PlaysForSure Firmware v2.0.03. I installed this firmware (I had to install the Creative ZenJukebox Driver v.30.03 first to get Windows to recognize the device). Once the firmware was upgraded, Windows began recognizing the Zen Xtra as a MTP device and life was good. I was able to synchronize it with both Napster To Go and Windows Media Player 0.
    After this, I went ahead and installed Windows Media Player Beta, which I just downloaded yesterday as well.
    From a functional standpoint, WMP seems to run just fine. However, when I connected the Creative Zen Xtra (with its PlaysForSure firmware), Windows redetected the hardware. It first showed "Creative Jukebox Zen Xtra" in the tooltip, followed by "MTP Device" in the new hardware tooltip. Finally, Windows announced that there was a problem installing my new hardware and that it may not work properly.
    Sure enough, when I went into Device Manager, my Zen Xtra was showing as an MTP Device with an exclamation point on it. More specifically, it specified the status of, "This device cannot start (Code 0)."
    Prior to the installation of Windows Media Player, the Creative Zen Xtra showed in device manager with the following characteristics under the heading "Windows Portable Devices":
    Name: NOMAD Jukebox Zen XtraDriver Version: 5.2.0.0 dated 8/30/2004Digitally Signed by Microsoft Windows Component Publisher
    Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.3802.3802 built by dnsrv(bld4act)
    Windows Media Player changed this to the following (the device now shows up under "Portable Devices"):
    Name: MTP DeviceDriver Version: 5.2.5326.4762 dated 2/22/2006Digitally Signed by Microsoft Windows Component Publisher
    Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.5358.4827 (WMP_.060509-2009)C:\Windows\system32\DRIVERS\wudfrd.sys - v6.0.5348.0(winmain(wmbla).0604-339)
    The file wudfrd.sys is NOT digitally signed in this case.
    As of now, my Zen Xtra is completely unusable on this system, and I need to sync it with my laptop for the time being, which still has WMP 0 installed on it.
    Is this a bug with WMP beta? Is it a problem with my firmware? Since this is PlaysForSure compliant firmware, and it worked flawlessly with Napster and WMP 0 (before the MTP driver was updated), it would seem to be a WMP beta issue. I'd like to hear more official confirmation on the subject, however.
    Some general details about my system are:
    Microsoft Windows XP Professional with Service Pack 2Verified GENUINE Microsoft operating system using Genuine Advantage ValidationIntel Pentium 4 CPU 3.2 GHz, Hyper-Threaded processor2.00 GB RAM
    Windows Media Player Version: .0.5358.4827Napster Version: 3.6.0.7 (US)
    Any recommendations? Fixes? Some have suggested rolling back the WMP installation, but I would like to consider this option only as an absolute last resort.
    Best regards,Matt

    Ok, this worked out accidentally - but happily
    I first installed the driver - not the media source - but the driver for the device.
    After that the windows device manager yellow sign disappeared - apparently the device driver was registered by windows.
    Then I Installed Mediasource 5 - the installation went thru fine.
    Does anyone have any recommended updates to install, please also advise what benefits.
    Thanks.

  • Nomad Jukebox Zen Xtra won't turn

    My problem is exactly as the title states. I have a Nomad Jukebox Zen Xtra (40 gig HD) and I cannot get it to power on. This problem has been occuring since yesterday evening. I try to plug it into the computer via the USB cable, but this does nothing. The same is true of plugging it into a wall outlet with the charger that came with it. I can't tell you what the firmware on it is, as I have no ability to view that.
    Any suggestions as to what I can try next?

    I have (and left it out for fi've minutes, per another suggestion in another thread). Thanks to both of you for your help, I'm in contact with Creative's customer support via email now (thankfully it's within the 90 day warranty period)

Maybe you are looking for