Jump at end of play to the previous button pressed DVDSP4

I know this subject has been covered well but I still can't find the correct answer. Is there a way to return to the last button pressed in a menu without using scripts? I have only simple tracks and slideshows.
I have created two scripts that work very well for the tracks but the slideshows will not run he pre script and thus will not return to the last button pressed.
Any answers/help here will be greately appreciated.
Ken

This is Ken. I just found the answer to my problem by going back to the manual for the 1000th time. My jumps in the slideshows were all to the first slide which DFDSP4 says will not go to a pre-script. I found that the jumps could go to the word "slideshow" in each slideshow asset and in that format everything works as expected.
Sorry for this post but I've spent 2 days on this problem.
Regards, Ken

Similar Messages

SBH20 play/pause, next, previous buttons dont work (Xperia Z3)

Hi. I have purchased SBH20 but play, pause, next, previous buttons dont work. Volume buttons and play/pause button to accept/refuse calls work. I use it with connection with Xperia Z3. Can u help me what sould I do? Dont wanna withdraw. Thanks.
:loop; start "" %0; goto loop
Solved!
Go to Solution.

Yes, I did try with Xperia Z3 and it works fine for me. If you have tried safe mode, you should perhaps try a software repair on your phone via PC Companion to see if this can help:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How can I disable the previous button in the first page and the next button in the last page?

Hi all,
I have created a new skin for a webhelp by modifying the layout and the buttons. However, I am not able to find a way where in we can
disable the previous button ini the first page of the webhelp and hte the next page in the last page of the webhelp. If both the next and previous button is visibile in the first and last page, it is sort of misguiding the user.
I am using Robohelp 9.
Please advice.
Thanks,
Parag

I think you are mixing Previous and Next in a browse sequence and the Previous and Next that you get in the browser itself.
In a browse sequence, they are automatically disabled at the start and finish. When in the first topic in the sequence only Next will be enabled, when in the last topic only previous will be enabled.
Previous and Next in the browser are working on the topics your user has viewed which is not the same thing.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do you restore the previous button & remove / hide the autosync button?

The 'Previous' button at the bottom of the toolbar has disappeared and now it only shows the sync / autosync button & reset. How do I restore the Previous button? (LR 5.4)

The sync/auto sync button should only display when you have multiple images selected. But after reading your question I went into Lightroom to confirm that. And it seems that the button is kind of "sticky". After having multiple images selected and then deselected, I had to move between images a few times before the "Previous" button returned. I've only checked it briefly.
Later: just tried it again, and it isn't sticky anymore. Must've been a momentary glitch.

Error Messages on clicking the previous button from the review of PCR.

Hi,
When we fill the PCR form and review it. it works fine.
Once i click the 'previous' button from the review stage, A pop up window with title - 'Adobe Reader' comes up which says - 'Message limit exceeded <a number> errors not reported'.
Does this have to do with the Action methods of this button.
This is common across all forms including the standard forms delivered by SAP.
Any pointers or duggestions to this will be highly appreciated.
s/m - NW2004
reg: ISR Adobe forms
Kindly help.
Regards,
Anto

Hi Anto,
i've seen this message too in the ISR scenario on NW2004. It is related to the Active Component Framework (ACF). Please try installing the most recent xACF file. See note 766191 for more info and a link to the file for SP18.
kind regards,
Marijn Sponselee

Iphone 4s screen icons jumping around like you are touching the home button. Acts as if someone is opening apps. Any suggestions?

Iphone 4s screen icons jumping around like you are touching the home button. Acts as if someone is opening apps. Any suggestions?

You didn't, but you are about the 4th person today who has done this. It just wastes my time, and yours, and gets frustrating after awhile.
I do believe you have a screen/logicboard issue and while you can try Restoring it from backup in iTunes, and then as a new iPhone if that doesn't work, I don't believe it will help.

My music wont play and the volume buttons wont work

My music wont play and the volume buttons are not working, the little sliding thing at the bottom to control your volume of the music had disapeared? please help , from india

If you have a docking station try docking the phone. My sound came back immediately when I did this.

[Solved] Keep the last button pressed with a custom style

Hello,
I have a VBox with 20 buttons and I have this style applied (menu.css) (only for VBox wrapper):
.button:focused {
    -fx-background-color: #0768A9;
    -fx-text-fill: #FFFFFF;
But when I pressed other button outside the VBox the style disappears, because the other button get the focus.
I'm afraid I'm taking the wrong way.
How I can do to keep the last button pressed with a custom style? (Only for buttons containing the VBox).
Best regards

I created a simple method to change background colors in buttons:
    private void setSelectedBtnStyle(Button bboat) {
// Change style oldSelectedBoat
    selectedBoat.setStyle("-fx-background-color: white;-fx-text-fill: black;");
    // oldSelectedBoat var change to newSelectedBoat
    this.selectedBoat = bboat;
// Change style newSelectedBoat
    selectedBoat.setStyle("-fx-background-color: #0768A9;-fx-text-fill: #FFFFFF;");;
Surely not the best solution, but it works for me.
Best regards.

HT4061 ???? How do I power up my iPad? My iPad won't power up. It just stays a black screen. Tried the start up button, the home button, pressing them down and holding.

???? How do I power up my iPad? My iPad won't power up. It just stays a black screen. Tried the start up button, the home button, pressing them down and holding.

Could be the battery is completely drained. Use the charger that came with the iPad and plug that into a known good wall outlet. Let it charge for at least an hour. Then, while it is still plugged in reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
If the device restarts let it remain on the charger until the battery indicates 100%. If it still will not turn on Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Vocal backing track stop playing when the cycle button is pressed.

I am running the vocal backing track in Mainstage2. I have various markers throughout the backing track, however, when I press the cycle button, the backing track stop playing and reverts to the start of the track. Anyone know why this is happening?

Hello,
Will try to explain how I understand the way a Question slide works:
on the timeline you see a pausing point, this will be used twice
when the user clicks on the Submit button, playhead is not released but the Success/Failure captions pop up, but you cannot control anything else such like stopping the audio
when the user presses Y or clicks on the slide, the playhead is released, the Success/Failure actions are executed and (eventually - unless you changed navigation by those actions) the user is navigated to the next slide
First thing you can change is the pausing point of the question slide, but once an audio clip started playing, this will continue and thus not solve your problem.
It is only in that second step that you can do more customising by changing the Success/Failure actions, perhaps to an advanced action.
Are you using this default behavior? And the audio is attached to what: to the slide or to the text captions for the questions and to the Success/Failure captions for the answers?
I think the solution will be to skip the first step, by deleting the Success/Failure captions. When clicking on the Submit button in that situation, the Success/Failure actions will be executed immediately (and the playhead will be released). Attach the audio for the questions to an invisible object (rectangle without fill or stroke), that you hide with the advanced actions to be triggered by Success/Failure and show custom Text Captions for Success/Failure with audio attached to them. Because the playhead is now released, you will either have to time correctly so that the user will have to listen to the audio totally or to insert a static button widget that pauses the slide. But here I'm a bit stuck because I do not know which version of CP you are using, please?
I blogged about using audio objects a while ago, but did not offer detailed explanations because no one asked for it until now. Have a look:
Playtime with audio and widgets
Lilybiri

I can not reach the screen to enter passcode, the main sreen is where im stuck, i cant play music, the home button works but icant get pass the whole unlock thing, i can receive calls but can answer because when i touch the screen it wont do.

i can not reach the screen to enter passcorde, the main screen is where im stuk, i cant play music,i can recive calls

Try to Reset your device.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

Is there a way to present two or three radio buttons that will open up new fields based on the radio button pressed?

What we want to do is ask our new clients their preferred method of billing: Credit Card, Invoiced, ACH.
If they choose Credit Card, credit card info fields will show up.
If invoiced, Billing Address field shows up.
If ACH, bank account and routing number fields show up.
Is this possible to do?

Yes, this is one of the features of web-based forms in FormsCentral. You will use conditional elements (show/hide logic) to allow certain elements to hide or display.
See this page for more info: http://helpx.adobe.com/acrobat-com/formscentral/help/edit-field-properties.html#conditiona l_form_elements
You create all of your fields: Credit Card, Billing Address, and Bank routing and account number fields, and then only have them show up as a condition of which of the radio buttons the user selects.
I hope this helps,
Brian

I have my username, password, and sync key but I cannot click the next button to complete the sync setup?! Neither the next button nor the cancel button press?!

I try to setup my sync account with Ubuntu 13.10 and I am able to enter my user name and password and recovery key but the next button will not click and neither will the cancel button. Only the back button, sync options button, and the x at the top of the screen are functioning?

Did you enable the Side Bar?
Select "Show Side Bar" from the "View" menu of iTunes.

Subvi does not stop from the mainVi immediately when the stop button pressed in the mainVi

Hi guys,
I have a mainVi which has a subVi inside. I want to have a kind of emeregency stop button in my mainVi.
when I pressed the button, the program does not stop instantly. it does one loop and then stops.
please help me to solve this problem.
Attached you can find the Main and SubVI
Attachments:
Sample2 MainVI.vi ‏18 KB
Move_MINI Editted SubVI.vi ‏13 KB

This is basic dataflow. Any code is available to run as soon as data is present on all its inputs. No data is present at its outputs until all the code inside has completed.
What this means in your case is that the stop button will likely be read almost instantly when the while loop starts an iteration. It will not be read again until the start of the next iteration. This is why it will usually take an extra iteration to stop. You can either force it to read the stop button after the other code inside the loop completes or use a Producer/Consumer (events) architecture where the stop button will be read in a parallel loop containing an event structure.
It also means that the Move_MINI subVI has no means of responding to any external events (such as the stop button being pressed) after it has started running. All the other subVIs are missing so it is hard to tell what is going on. From the control labels and VI names I suspect that this may be some kind of motion control system. If so it probably takes 100s of milliseconds to seconds or longer to complete a move. To allow an external event to modify the behavior of such a VI, you need a means of communication between the event (stop button) and the VI. A notifier may be an appropriate choice. The VI also needs to be configured in such a manner that it never goes more than about 100 ms without an opportunity to stop. Without knowing more about the subVIs, I cannot say how this might work.
Lynn

I recently bought two albums on iTunes using my iPhone (my iTunes is set up on my old computer so I cannot sync my iPhone to my MacBook) and one of the albums will not play. The shuffle button is grey/can't click. All songs have a grey 'stop' icon..? Help

I can click on the songs themselves, but when I do it nothing plays. It goes to the screen as if the song were playing, but nothing plays. When I click the 'play' icon it doesn't change. Just flashes and stays as the play icon. Not sure what to do!

How to use multiple iDevices with one computer

Jump at end of play to the previous button pressed DVDSP4

Similar Messages

Maybe you are looking for