Jump in data use after trip

The strangest thing has happened twice on my family plan. Two people in my family went on trips out of the country. We got an international data plan, which all worked fine. But I thought it was safe to presume that while out of the country, none of our USA-data would get used. But that does not seem to be the case.
One family member left at the beginning of the billing cycle and came back 10 days later. She had zero data on our account initially, and then when she came back, it suddenly jumped up to 300MB. It's as if her average per-data usage had not gone down at all, despite not using USA data for 10 days.
Then another family member was gone for the first 5 days of the month, and the day he got back, it jumped up to 100MB. Again, it was as if he hadn't even been out of the country- the data usage was no different than if he had been checking all his email, his facebook, using gps, web for the past ten days in the US.
And it can't be an OS thing. Because one phone is android, and one is iphone.
It's not like they were "catching up" on email on their trip- they still had access to wifi and international data.
It's not as if all of their programs were suddenly updated- their apps are set to download on wifi only.
So what could be going on here?

As soon as they got into the US the phone would know that. Maybe the regular data kicked in and started updating and stuff without them knowing?

Similar Messages

Can the mac osxlion usb jump drive be used after as a external drive for storing media files

can the mac osxlion usb jump drive be used after as a external drive for storing media files

If you are talking about the Lion install USB thumb drive sold by Apple then no it can't. it has some specail formatting that makes it show up as a DVD drive and is securely locked from any changes.
But I must ask why would you want to. That would destroy that drive and wipe out the Lion installer.
USB thumb drive can be bought for $8.

How to cut off data use on a line in a family share plan?

Is there a way to cut off data useage on one line in a family share plan? I have one person that is going over and want to simply cut off the data use after she reaches say 110% of her use in the billing cycle.

I agree get Family Base and charge then the extra $5 it will cost since that person doesn't seem to understand the concept of SHARING. Or up the data plan and charge the extra to them and tell them since you had to increase the data plan because them they can pay the extra mount.

Use After method in formatted date.

Hello everyone, does anyone know how to use .after method in date without time included?
My problem here is that when i use the .after method on dates it includes time, the result is that it is always true.
import java.util.Date;
public class CompareDateAfter{
public static void main(String[] args) {
       Date firstDate = new Date();
       Date secondDate = new Date();
       secondDate = appointmentCheck.getAppointmentDate();
DateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd");
dateFormat.format(firstDate);
dateFormat.format(secondDate);
if(firstDate.after(secondDate))
System.out.println("Second Date is initialized before First Date");
else
System.out.println("Second Date is initialized after First Date");
Example:
Thu Jul 23 00:27:22 CST 2009 (i got this by declaring a new date) is always after Thu Jul 23 00:00:00 CST 2009 (i got this from the database with the original value of 2009-07-23).
Thanks in advance, hope you can help me.
Edited by: xrookie24 on Jul 22, 2009 9:37 AM

xrookie24 wrote:
What i meant is:
Thu Jul 23 00:27:22 CST 2009 (i got this by declaring a new date) is always after Thu Jul 21 00:00:00 CST 2009 (i got this from the database with the original value of 2009-07-21).Yes, it is, isn't it? So you want to know what to do about it? What I would do is to set the hours, minutes, seconds, and milliseconds of your "new date" to zero. A Calendar object is the most convenient way to do that.

After downloading ios6 my data use went thru the roof. i am at 199mb. Never used over 40. what is causing this?

After downloading IOS6 my data use soared to 199mb. I never have used more than 50 in a month. I have an iPhone 4 and 4S, it only happened to the iPhone 4 that my wife uses as a phone away from WiFi. Stan

also, this article applies to iPhone 5, but maybe it's starting to affect 4's?
http://appleinsider.com/articles/12/10/01/bug-causing-iphone-5s-to-use-cellular- data-while-on-wi-fi-may-not-be-limited-to-verizon

SSMS 2012:XML File Query: Importing XML data using a CTE-Incorrect syntax near 'BLOB'?

Hi all,
From https://www.simple-talk.com/content/print.aspx?article=1756, I mimicked to create the following sql code to do Importing XML data using a CTE:
---Importing XML data using a CTE -----Ad-Hoc XML File Query--simple-talk---1020AM 27 Feb 2015
---query the XML Blob using a CTE (pulling from the XML file each time
USE OPENXMLtesting1
GO
With XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'C:\XML FilesMicrosoft-Samples\books.xml', SINGLE BLOB) AS XmlData
SELECT
FROM XmlFile
GO
I got the following message:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near 'BLOB'.
I have no ideas why it is incorrect in that code statment. Please kindly help, advise and respond.
Thanks in advance,
Scott Chang
P. S. The books.xml file was copied from the Microsoft samples:
<?xml version="1.0"?>
<catalog>
<book id="bk101">
<author>Gambardella, Matthew</author>
<title>XML Developer's Guide</title>
<genre>Computer</genre>
<price>44.95</price>
<publish_date>2000-10-01</publish_date>
<description>An in-depth look at creating applications
with XML.</description>
</book>
<book id="bk102">
<author>Ralls, Kim</author>
<title>Midnight Rain</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2000-12-16</publish_date>
<description>A former architect battles corporate zombies,
an evil sorceress, and her own childhood to become queen
of the world.</description>
</book>
<book id="bk103">
<author>Corets, Eva</author>
<title>Maeve Ascendant</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2000-11-17</publish_date>
<description>After the collapse of a nanotechnology
society in England, the young survivors lay the
foundation for a new society.</description>
</book>
<book id="bk104">
<author>Corets, Eva</author>
<title>Oberon's Legacy</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2001-03-10</publish_date>
<description>In post-apocalypse England, the mysterious
agent known only as Oberon helps to create a new life
for the inhabitants of London. Sequel to Maeve
Ascendant.</description>
</book>
<book id="bk105">
<author>Corets, Eva</author>
<title>The Sundered Grail</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2001-09-10</publish_date>
<description>The two daughters of Maeve, half-sisters,
battle one another for control of England. Sequel to
Oberon's Legacy.</description>
</book>
<book id="bk106">
<author>Randall, Cynthia</author>
<title>Lover Birds</title>
<genre>Romance</genre>
<price>4.95</price>
<publish_date>2000-09-02</publish_date>
<description>When Carla meets Paul at an ornithology
conference, tempers fly as feathers get ruffled.</description>
</book>
<book id="bk107">
<author>Thurman, Paula</author>
<title>Splish Splash</title>
<genre>Romance</genre>
<price>4.95</price>
<publish_date>2000-11-02</publish_date>
<description>A deep sea diver finds true love twenty
thousand leagues beneath the sea.</description>
</book>
<book id="bk108">
<author>Knorr, Stefan</author>
<title>Creepy Crawlies</title>
<genre>Horror</genre>
<price>4.95</price>
<publish_date>2000-12-06</publish_date>
<description>An anthology of horror stories about roaches,
centipedes, scorpions and other insects.</description>
</book>
<book id="bk109">
<author>Kress, Peter</author>
<title>Paradox Lost</title>
<genre>Science Fiction</genre>
<price>6.95</price>
<publish_date>2000-11-02</publish_date>
<description>After an inadvertant trip through a Heisenberg
Uncertainty Device, James Salway discovers the problems
of being quantum.</description>
</book>
<book id="bk110">
<author>O'Brien, Tim</author>
<title>Microsoft .NET: The Programming Bible</title>
<genre>Computer</genre>
<price>36.95</price>
<publish_date>2000-12-09</publish_date>
<description>Microsoft's .NET initiative is explored in
detail in this deep programmer's reference.</description>
</book>
<book id="bk111">
<author>O'Brien, Tim</author>
<title>MSXML3: A Comprehensive Guide</title>
<genre>Computer</genre>
<price>36.95</price>
<publish_date>2000-12-01</publish_date>
<description>The Microsoft MSXML3 parser is covered in
detail, with attention to XML DOM interfaces, XSLT processing,
SAX and more.</description>
</book>
<book id="bk112">
<author>Galos, Mike</author>
<title>Visual Studio 7: A Comprehensive Guide</title>
<genre>Computer</genre>
<price>49.95</price>
<publish_date>2001-04-16</publish_date>
<description>Microsoft Visual Studio 7 is explored in depth,
looking at how Visual Basic, Visual C++, C#, and ASP+ are
integrated into a comprehensive development
environment.</description>
</book>
</catalog>

I found the mistakes I made and I corrected them. The newly revised/corrected code is:
USE OPENXMLtesting1
GO
With XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'C:\Temp\books.xml', SINGLE_BLOB) AS XmlData
SELECT *
FROM XmlFile
GO
It worked: Results
Contents
1 <catalog><book.id="bk101"><author>Gambardella.M...
If I clicked on this, I got a listing of the whole book.xml!! I don't know what it means. Please comment and respond.
Thanks,
Scott Chang

What is causing recent mac data use spike?

I have a Hughesnet internet data use limit of 15Gb per month which typically for my family is sufficient. As of last Thursday April 10 around 7AM my data use shot up and continued consistently high every hour. It started at 200 - 300 Mb / hour, jumped to ~550Mb / hour at 2AM 4/11/14, jumped again to 1 - 2 Gb / hour 7AM 4/11/14 and continued until all the data had been used ~9AM 4/12/14. I am using the Hughesnet utility to show what was used (after the fact) and I use Activity Monitor to what real time data use. I think it would be helpful to have a way of graphing the data use by process realtime if that exists so I can see what exact process is causing the data use. I do not have any virus software running.
As of Sunday 4/13/14 having no data left I contacted Hughesnet and began to troubleshoot the problem. I disconnected everything from the internet and shut down my wireless modem. All that has been connected since then (today is 4/16/14) is my iMac which is directly connected to my Hughesnet modem. I was given an additional 2Gb for troubleshooting. I left my iMac alone for 2 days. Very little data was used and almost no programs were running when I started using it again around 11:30AM 4/15/14. Unfortunatly, as my wife started using the iMac for a few hours that data use went up again and used up all the data. One thing i noticed was that the data use coincided with iMail being on.
How can i identify the problem and stop it?

Gmail is an intentionally broken implementation of IMAP that often causes problems with Mail. The problem seems to have gotten worse in Mavericks. Google has no incentive to make Gmail work well, or at all, in any mail client, because the company makes money by delivering targeted ads via the Web. The Gmail servers analyze your messages to glean information about you and your contacts that Google can then sell to marketers, or to anyone who will pay for it. You agreed to those terms when you registered a Gmail address.
I suggest either not to use Gmail at all, or to access it through the website as Google intends. You might get better results with another email client. I don't recommend any one in particular.
If you insist on trying to make Gmail work with Mail, the following links may help:
Configuring OS X Mail For Gmail Without Duplicates
Setting up Apple Mail to Rock and Roll with Gmail

Network based and a-gps, data use tests

i was trying to find this kind of info, but only found others asking.
i hope this is useful info for others, especially while roaming.
skip to the bottom for conclusion,
this is the process i took:
i called nokia tech support,
their phone support his horrible,
the people on the phone don't actually know anything, and have to look up everything you ask them.
they were the worst.
i emailed nokia tech support.
my message was:
"i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
the first response, minus the hello's etc. was:
"In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
the 2nd response was:
"In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that, A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
test 1:
i enabled:
integrated gps
network based
assisted gps
opened maps,
set maps to be offline,
set default internet access point to my home wlan network,
closed maps,
cleared all counters and the log on the phone's communication log.
opened maps
there is a pink circle around the area i may be in,
the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
over the course of ten minutes, it's been about 43kb.
and i can tell on the phone's home screen that the packet data connection becomes active when it does.
the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
test 2:
now i exited maps,
cleared the counters and logs
i turned off a-gps.
enabled only integrated gps and network based.
i open maps,
the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
everything else is happening the same.
test 3:
i exited maps,
cleared the counters and logs.
enabled only integrated gps.
i open maps, and there is no evidence of packet data connection, or wlan connection.
nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
test 4:
set maps to offline, w/ my wlan as access point.
exited maps,
turned phone off for a bit to test gps from cold start.
turned on phone,
cleared counters/logs,
enabled only assisted gps and integrated gps.
open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
there's about 4-5kb of data transfer,
then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
so to conclude my tests,
setting the maps to be offline, still uses a-gps and network based positioning.
network based uses a more data, continuously,
which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Address data changed after invoice is created

Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno Rodrigues

Hi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans

On the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the

I am using a brand new iPad Air and a MacBook Pro with Retina and on the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the arrows in the menu. It is not possible to jump to a certain page as well. The overall speed is incredible slow to switch between pages.

Exact same problem here - Win 7, ADE V3.0. - pages wont turn unless I click on the symbol at the top RHS of screen for Full/Normal size screen after Page Up/down or a click on the contents page.
Hopefully a bug or something, and not a 'feature' :-)

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

Getting error while importing the data using loadercli

Hello,
I want to copy the data using export/ import via (loadercli).
scenario:
1) I have 2 server and i want to export data from old server and import in to new MAXDB server using loadercli.
I have done this once and it went fine , but now I want to do the export import again so i will have te latest data on the new server.
when i tried to do that it gives error that the table already exist . Can i use loadercli to import hte data again ?
can any one help me in this ?
Regards,
Bhavesh

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while importing Item MAster Data using DTW

Hi,
when we are importing item master data using items template
it is giving error.
Error:":connected value 1 was not found "
can any one send the oitems template that is working fine wthout any error.
Thanks,
Neetu

You cannot import data prepration templates>>Testcase1_Test Data for Import function>Oitems directly.
You will have to do certain prerequisites like setting CommissionGroup, CommissionPercent, CommissionSum,CustomsGroupCode etc., in SAP before importing Items.
So I would like you to try out with minimum fields in the template and import. After understanding, you can import the required fields.
I suggest you to use the template from "C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\oItems"

URGENT HELP NEEDED!!! No data connectivity after a while, weird errors

I am using T-Mobile's regular prepaid web plan and Wi-Fi just fine, no need for BIS, Rich Email, or BBM (SMS and MMS is just fine). All I ever use are apps that SPECIFICALLY state that they work over standard TCP/IP and Wi-Fi. The problem is, after some time, the apps that one worked over regular data connections and MMS don't connect anymore. Even though the apps said that no BIS is needed, they can't access data. Even RIM's own Facebook app, which claims to work over Wi-Fi (and does) loses data connectivity after a day or so without a full reboot. The only thing that works is the BlackBerry Browser, which still connects to the internet. Along with the apps failing to work, MMS messages also can't be sent.
Rebooting the phone by a battery pull or alt-shift-delete allows the apps and MMS to work, which after a day (sometimes even shorter) stops working again.
Here's what I've done so far:
- Checked and made sure that all permissions for data access
- Checked that my APN settings are correct: epc.tmobile.com
- Checked my Wi-Fi router for connectivity
- Called T-Mobile tech support for help, wiped my phone upon their instruction
- Reinstalled my apps and contacts, T-Mobile sent me new service books
Still the SAME THING with apps and MMS not working after a while. I've narrowed it down to entries in the event log that show up as this, which shows up seconds before my apps and MMS stop working:
a net.rim.hrtRT - PUpI - 9/23 17:06:58
a net.rim.hrtRT - EPdp 0x3 - 9/23 17:06:58
a net.rim.tunnel - Clos-blackberry.net - 9/23 17:06:58
a net.rim.hrtRT - CClG 0x2 - 9/23 17:06:58
W net.rim.hrtRT - XMax - 9/23 17:06:58
W net.rim.hrtRT - XBad - 9/23 17:06:58
E net.rim.mdp - TEma - 9/23 17:06:58
W net.rim.mdp - TDtm - 9/23 17:06:58
i net.rim.mdp - TTex - 9/23 17:06:58
Can any experts or developers tell me what these Warnings and Errors mean? I am pretty sure that whatever "net.rim.mdp" and "net.rim.hrtRT" is doing isn't good.

anyone care to help???
Also, on the 18th I wiped my phone again, and three days later (longest time with no mdp error) the same error occurred in the event log, no internet connectivity afterwards on Wi-Fi or Mobile Network...
The Tunnel Engineering Screen under Multi-WAF Encineering Screens shows the following:
1 VPN <7.105.226.218>
Tunnel ID: 1
Tunnel Type: VPN
Tunnel State: UNEXPECTED ERROR
Tunnal IP Address: 7.105.226.218
2 WLAN <192.168.1.x>
Tunnel ID: 2
Tunnel Type: WLAN
Tunnel State: UNEXPECTED ERROR
Tunnel IP Address: 192.168.1.x
3 3GPP blackberry.net <22.185.134.169>
Tunnel ID: 3
Tunnel Type: 3GPP
Tunnel State: UNEXPECTED ERROR
Tunnel IP Address: 22.185.134.169
4 3GPP epc.tmobile.com <26.203.192.238>
Tunnel ID: 4
Tunnel Type: 3GPP
Tunnel State: UNEXPECTED ERROR (shows OPEN_READY only when browsing webpages)
Tunnel IP Address: 26.203.192.238
Something tells me that the tunnels are being blocked, since closing and recreating them does the same thing. Anyone else have this problem???

Jump in data use after trip

Similar Messages

Maybe you are looking for