Jump Targets from the web

I have a query with a jump target which is another BW query. When the sender query is run in BEx i can go to the jump target and it excutes fine with the proper filter values being passed. When the sender query is executed from the web the jump target query comes up but no filter values are passed. Any suggestions would be appreciated.
Stan Pickford

Hi Rashmi,
This note 1176550 might solve the issue depending on your SP.
Also review the application rules for hints -> note 1053310.
Thanks,
Michael

Similar Messages

RRI from the web template

Hi,
I have a requirement where in I need to jump from source query to target query from the web template. Our source query is static and no navigation is allowed. So in analysis grid item, I had to remove navigation as option. When I do this, user cant remove anything from the report but the issue is when user right clicks, GOTO option is not available. when I un tick the navigation , GOTO is available.
So my requirement is navigation should not be available but GOTO should be available in context menu.
Thanks
Annie

Hi Arvind,
Thanks for the reply.
Even if i copy and use it in the wad, User can still take out few rows from the selection if i dont switchoff the navigation from the web template. When the user removes any row from the table, my result of the report will be wrong because report is based on condition. Hope i am clear
Thanks
Annie

Problem of running the jump query from the result line

Dear expert,
I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target. However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
Does anyone have some ideas on that?
Thanks in advance!

Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob

Connect a tablet as input method or push asynchronously data from the WebAs

If have to connect a tablet to a WebDynpro application. Not a tablet PC or something, just an ordinary tablet. This is one of those big plates with hundreds of imaginary buttons.
The user pushes with a pen some imaginary buttons on the tablet and the WebDynpro program should act accordingly. E.g. the user pushes in the oder entry WebDynpro the button "TheMP3Player" and directly after that the button "colour green", then pushes two time the "battery pack" button and then "type enhanced capacity". The WebDnypro component should react accordingly. Should jump between field, etc.
Do we have the possibility to add an input device like this to the WebDynpro application or are we stuck with mouse an keyboard? At least, I could not find a way to do this in WebDynpro.
If I would use an ordinary, classical Dynpro, I would write and RFC server, write the data from the tablet to the WebAs and from there write the data directly to the Dynpro.
Since WebDynpro is more or less stateless, we can do this here, right? Or is there some "add on" that I could use to poll on a regular or on an event basis (an event not triggered by mouse or keyboard though) data from the WebAs?
Any help would be appreciated.
Thank you!
Kind regards,
Andreas

Hi Maaniks,
I'm a little puzzled by step 5. The return from the tpcall() will be TypedBuffer, so you shouldn't need to create another TypedBuffer. You may need to downcast it to the particular type of TypedBuffer returned, but you shouldn't need to create a new TypedBuffer or TypedFML32.
Otherwise what you are doing is probably pretty reasonable and common. I'm not aware of any general purposes classes that do what you are looking for, although creating one probably wouldn't be hard. Using reflection you could make it such that the same converter class could handle any POJO or Bean, assuming you can easily map the field IDs to attributes or properties of the POJO or Bean.
The only comment I might have is whether you use an iterator or look for specific fields is largely going to depend on which there are fewer of. If the class you are populating only takes a few fields from the FML32 buffer, you might just extract those fields instead of iterating through the entire FML32 buffer.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

How do I access my AE attached lacie drive from the web

I just hooked up a 1TB drive to my new AE and think I have it configured properly in the disk pane of airport utility. I'm very much hoping that I have it configured correctly! I chose to configure "with a disk password", and not " accounts", and just for the heck of it clicked on the "?" [airport utility help] at the bottom of the Disks/File Sharing page. At the bottom of the page in help under "sharing a usb hard disk on your network", under " to set up disk sharing:" #4 "select the " share disks over ethernet WAN port" checkbox if you want to provide remote access to the disk over the wan port", It turns out that I don't have that message on my airport utility pane for Disk/ file sharing. I do have a checkbox that says " share disks over the internet using Bonjour, but I definitely don't have a checkbox that says " ethernet wan port" as a choice.
Why would my pane be missing that choice? I recall setting up the AE choosing to be able to use computers with the pre 802.11n compatability. Should I have chosen the 5ghz which is 802.11n only as I recall.
I hope this all isn't sounding to complicated. I just want to be able to access my hard drive [connected to the AE] remotely from the web and hopefully be able to access a huge music library that i have on that drive. HELP, PLEASE, KIND APPLE PEOPLE!

It is attached to another router.
In order to access a drive from the Internet, you need to know the Public IP address of the router and the router would need to be configured to port map the file service requests from the Internet to the drive. Apple provides Leopard and Snow Leopard users a means to access drives attached to an 802.11n AirPort Extreme Base Station (AEBSn), from the Internet, by using a feature known as "Back to My Mac." You may want to explore this option further.
Without Back to My Mac, the router would need to be manually configured to make this work. In a much simpler case where the 802.11 AirPort Extreme Base Station (AEBSn) is directly connected to the Internet modem, you would use the AirPort Utility to determine its Public IP address and to configure it for port mapping. The only difficult issue is the type of Public IP address that your ISP provides you. Most consumer-grade Internet service comes with a dynamic IP address. That means this address will change periodically and you will need to keep track of the changes in order to be successful in accessing it from the Internet. One way to do this is to use a DDNS service, like DynDNS.
In your case, there is an added level of complexity since the AEBSn is downstream of another router. You would have to configure both this router and the AEBSn to get this to work.
Should I try to set up with accounts, would that be different in regards to this problem?
The 802.11n AirPort Extreme Base Station (AEBSn) can share out a hard drive with three types of access: 1) Base Station Password, 2) Disk Password, or 3) With Accounts. Which type you choose will not affect the drive from being accessed from the Internet.

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I am a new iPhone 4s owner. I have a tone in iTunes that I downloaded from the web as a m4r file. Why won't it sync to my iPhone so I can set it as a ringtone.

I am a new iPhone 4s owner. I have a tone in iTunes that I downloaded from the web as a m4r file. Why won't it sync to my iPhone so I can set it as a ringtone?
Lois

Yes, the tone is available and checked in iTunes under the Tones library.
Yes, it is also listed under the Tones tab for my iPhone, but it is grayed out.
Yes, tones are selected under "sources" in General Preferences, along with everything else.
SyncTones was NOT selected under the Tones tab for my iPhone. I did so and it synced.
Thanks for your help!
Lois

Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl!

With OSX10.7.5 and Adobe Reader 11.0.02 when I try to open a PDF downloaded from the web I get 'There was an error opening this document. This file is damaged and could not be repaired. Preview will not open either. Older PDFs OK.

I am running OS X 10.7.5 and Adobe Reader 11.0.02. In the last few days I have been unable to open PDF's downloaded from the web. Reader gives the error message 'There was an error opening this document. The file is damaged and could not be repaired'. Removing Reader and trying to use Preview to open these files give the error 'Preview cannot open this file. It may be damaged or use a file format that Preview doesn't recognise' (or something like that). Downloading the same files with Reader removed from my Mac Preview opens the files OK.
I was recently prompted to update Adobe software but did not note exactly what the update was nor when it was done.
Reader and Preview will both open PDFs I downloaded a week ago. Reader will also open files downloaded on another Mac running OS X 10.0.0 and copied to my Mac. Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Adobe 8 - Unexpected Corrupt or incorrect file type warning when viewing a PDF file from the Web

Hi,
On downloading a PDF file from my web site using Adobe 8 on the client machine I expect the file to open automatically however I receive encounter the "File Download" dialog. It has the following warning message: "The file you are downloading cannot be opened by the default program. It is either corrupted or it has an incorrect file type. As a security precaution, it is recommended that you cancel the download."
This issue did not occur within previously tested versions of Adobe Reader (e.g. Version 5.1).
On investigating the issue I discovered the factor that results in Adobe 8 failing to open the file automatically is the Content-Type = "application/pdf; Charset=utf-8". However, if I intercept the response and alter the Content-Type to contain only "application/pdf;" the issue on Adobe 8 does not occur.
I have even tested when the Content-Type contains an empty Charset (i.e. "application/pdf; Charset=") but this issue still occurs. In addition setting the Charset to other encodings (e.g. "ISO-LATIN-7", "iso-8859-1") the issue occurs.
QUESTION(s):
1. Why is it necessary for Adobe 8 when opening PDF files from the web to expect no Charset within the Content-Type?
2. If this was not an issue within previous versions of Adobe surly this is a bug?
Since I cannot ensure that the Response's Content-Type does not contain a Charset at all please can someone suggest either a work-around or more importantly a solution to the issue?
Please Note:-
1. Within Adobe, Edit -> Preferences -> Internet option it's compulsory for our users to have "Display PDF in browser" ticked!
2. We cannot prevent a Charset from being present within the Content-Type of the response sent to the client, hence this issue.
Many Thanks in advance,
Martin.

Bill,
This is exactly the same behavior I observed when I rendered a PDF stored in a database through a .NET page. If I chose to save it, it would open fine after the save, but if I chose to open it in the browser without saving it, I would get the error.
The problem was not with the PDF or Acrobat. It was with the way I was delivering the PDF. Putting the following code before my binarywrite fixed the issue completely:
Response.ClearHeaders()
Response.ClearContent()
Response.ContentType = "application/octet-stream"
Response.AddHeader("content-disposition", "attachment; filename=" + saveFilename)
where saveFileName is the name you want to give the PDF.
You can use 'inline' instead of 'attachment' above if you just want the PDF to open (no option to save first). You can also use 'pdf' instead of 'octet-stream' (not sure the difference).
The trouble seems to be that .NET puts some info in the header and/or content by default prior to anything your code says to write. If you don't clear this, IE has an issue with it. Other browsers seem to ignore it.
Bottomline is that this is an issue the website programmer needs to fix and is not something the user can fix by changing some setting(s).
I hope this helps.

When I download something from the Web, the "Downloads" window opens, but the window remains blank. Before it used to at least show the name of the file and I could open the file from the "Downloads" window. Is there a way to get this functionality back?

I'm running Windows XP which is updated to latest version (which I think might be Service Pack 3, but not positive.) Mozilla Firefox is version 5.0. I tend to use Google as my search engine so most of the stuff I download comes through sites found through Google, which is also updated.
At some time in the past (maybe a few versions ago) when I would download a file from the Web, the "Downloads" window would open and in the window would be displayed the name of the file I was downloading or had just completed downloading. I think I used to be able to then click on that file name and the file (or the installation file if needed to start the new program) would open. I am currently using Firefox 5.0 (the "About Firefox" screen says this is up to date) and when I download a file or document, the "Downloads" window appears on the screen as it always has in the past, but it remains blank, i.e., nothing appears in the downloads box. I don't remember making any configuration changes, etc., that may have caused the window to remain blank, but I could be mistaken. I know how to find the items I've downloaded (My Documents / Downloads) and can usually guess what the name of the downloaded file might be, but it used to be much easier when something (anything) showed up in the downloads window.
I'd love for someone to tell me about a simple fix for this. I'm willing to be quite embarrassed that I did something I shouldn't have.'''

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

My Mac won't print a pdf from the web

My iMac will not print any pdf from the web. The printer (an ho Photosmart plus) will only print a blank shet of paper.

Try saving the file then, then open Preview and open the file and try printing again. If if the quality is still bad then it's the file itself.

How to download a file from the web

Say, a PDF.

Hi!
Your question is marked as a Firefox OS question which is Mozilla's own mobile operating system. Thanks for contacting Mozilla Support!
It seems that PDFs cannot be downloaded from the web at this moment, however there are apps from the marketplace you can download to open already downloaded PDFs available on your microSD card.

How can I move photos in iPhoto from the WEB Photo Stream or WEB Facebook to one of my Events?

How can I move photos in iPhoto from the WEB Photo Stream or WEB Facebook to one of my Events?

From PhotoStream either drag the photos form PS to the iPhoto window or set the iPhoto peference to automatically import PS photos
From Facebook save to isk and import from there
LN

How can I access a shared calendar from the web ?

Hi !
I use OSX SL, iCal 4.0.4, MobileMe.
When I share an ical calendar, I can not access it from the web. I can share it with other ical users, but can not find the correct url to access it from Safari. I have been searching the net and find suggestions, but all of them is about using the url stated in the share-dialog. When I share a calendar, there is no url for web access.
Hope someone can help.
Sveino

There is a method for publishing a MobileMe calendar to a web page (as can still be done with an 'On My Mac' calendar, though of course that won't sync to other devices).
The method is almost a hack, and depends on what appears to be a bug in iCal, so there is no guarantee that it will work, or continue to work, or won't cause problems. Also it appears that once published the calendar cannot be removed from the web page, even if the original is deleted.
With those caveats in mind, please see this web page:
http://homepage.mac.com/rfwilmut/notes/icalpublish.html
Note that there is a simpler method, involving exporting your MobileMe calendar as an .ics file, re-importing it as an 'On My Mac' calendar, and publishing it in the usual way. However of course it won't update if you update the MobileMe version, and if you make it the only version then of course it won't sync to MobileMe. It's one or the other, or use the hack described above.

Jump Targets from the web

Similar Messages

Maybe you are looking for