Jump Targets
Hi Frens
Can any one help me the Jump target sample code in cmod
Rgds
Hi Ashish,
RSBBS is a transaction code through which you can configure the RRI i.e taget and source will be give.
What I am lookinng is for eg. In a Sales report if you double click on , it will have to give you a full details.
Rgds,
Similar Messages
-
Jump target RRI from BW report to CRM Portal
Hello Experts,
Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
Step1) create the receiver
Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
Receiver is created
Assignment. details:
I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
OBJECT_ID is the table field in the CRM System for the transaction number.
GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
I tried with both the OBJECT_ID and GV_OBJECT_ID.
Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
Please suggest if anything got missed in the definetion of RSBBS.
Regards,
BWerHi,
What I found out so far is that by using a URL like
http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
In general I am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
Best regards,
Rudolf -
Query in RRI / Jump Targets
Hello Gurus,
I am querying on the FI-Ageing Analysis. The report is from an infocube. I have created a jump target, which in turn goes an ODS Query. In an ageing report, I have a total Overdue Balance (OB),OB between 0-30 days, OB between 30-60 and 60-90 days. The report is displayed on the customers. When I right click the value in one of the customers 60-90 days column (for eg.) , the jump target takes me to the ODS report but it shows me the line item documents for the total balance of the customer, while I am interested in seeing the documents of only overdue between 60-90 days.
Has anyone encountered this situation. Pls guide.
Thanks in advanceHi bw,
You can pass parameters in RRI.
Use the URl for furthur details .
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
Taru Gupta -
Report-to-Report Interface, Jump Target
Dear Friends,
Can anybody help me to Understand ,how to use RRI Interface and the Scenario of Jump Target ?
I will be thankful , If I am Explained with a Small Example , So that I can follow the Procedures
ThanksH I Ramesh,
see best example.. genrate one query on master data... and another query on transactiona data..( but make sure that... your transactional query should contain atleast one field that exist in first query)
for example.. generate one Query on Employee master data...(that contan- EMPNO , ENAME , ADDRESS)
nad generate second Query on Employee transactional data ..( that contain..
EMPNO , SAL, BONUS , INCENTIVES , LEAVES ) like this..
now go to RSBBS tcode... and give the first query name.. and in the down give the second query name..save it..
now go to BEX and execute your first query.. and in that select any EMPLOYEE NUMBER and right click it--> and select second query name.. ..
now you can able to see that particular employee details only..
regards
@jay -
RRI Jump Target: where-used
Hi,
I have a query that is used by a lot of other queries as a jump target. Is there a shortcut way to find out which other queries are senders to this one? Or do I have to check one by one?
Thanks in advance,
Franhi Fran,
try tables
RSBBSQUERY
RSBBSQRYMAPPING
RSBBSQUERYDIR
rsbbs* tables
RSBBS_RSRR_URL URL for Transaction RSRR in the Source Sys
RSBBSCUBE BW: InfoCube Receiver
RSBBSCUBEDIR BW: Directory of the InfoCube Sender
RSBBSCUBEMAPPING Fixed Mapping for BW-R/RI
RSBBSCUBET BW: Texts for InfoCube Receiver
RSBBSIX BW: Cluster Table Info. System
RSBBSQRYMAPPING Fixed Mapping for BW-R/RI
RSBBSQUERY BW: Query Receiver
RSBBSQUERYDIR BW: Directory of the Query Sender
RSBBSQUERYT BW: Texts for Query Receiver
Re: list of rsbbs queries ?
hope this helps. -
I have a query with a jump target which is another BW query. When the sender query is run in BEx i can go to the jump target and it excutes fine with the proper filter values being passed. When the sender query is executed from the web the jump target query comes up but no filter values are passed. Any suggestions would be appreciated.
Stan PickfordHi Rashmi,
This note 1176550 might solve the issue depending on your SP.
Also review the application rules for hints -> note 1053310.
Thanks,
Michael -
I have to work on some SAP BW security stuff like authorizations at infoobject level and other related stuff (ex: RRI jump targets to specific TCODE in R3 - should not have access to other TCODES from the tcode which you are in R3). I am not sure what else I need to do and this is a Brand New implementation. So if anybody has worked on the BW security, can you please provide me with any documentation you have.
Any documentation/presentations or any guidance/links in this regard will be very helpful to me.
Thanks in advance for your help
MAHIhi Mahi,
check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
RRI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
hope this helps. -
Can multiple RRI jump targets co-exist in Web Appl.
Hi,
I have a Web Appl. with multiple jump targets. When jump to first target, system create a new window for the target report. When I go back to the main report to jump to 2nd jump target. System reuses the same sub report window to display the 2nd jump target report. It means I can have only one target report open. Is there way to work around the problem to have multiple jump target reports open at the same time?
Thanks,
FrankHi Frank,
You could do a CTRL+N on your sender report for it to open up in a new window, and then do the second RRI jump from here..but this way you will have one extra window for each target report displayed. Does this hapen even if you ALT-TAB back to the sender report? -
Mass upload in Jump targets(urgent )
Hi Experts,
In creating Jump targets in RSBBS..let me know the option to have a mass upload multiple selection in jumping from one query to another.
I mean that when we go to another query(receiver) from the result area of the first(sender) how would be the selections in these? also is there any option to have a mass upload to the selections of the receiver query from the first.
I know that it takes single values when we click on a single row and when we click on the column it takes the entire valus for selections.
Also how can i view the selection screen of the receiver query.
Can anyone help me in this regard.
Regards,
Rambo.
Message was edited by: Rambo sawh
Message was edited by: Rambo sawhHi,
try the following:
1. make the variables of receiver as mandatory / ready for input
based on your query, BW should display the variables of receiver...there you can add if you need more input...
hope this helps -
RSBBS: Jump target should be special workbook
Hi Gurus,
within transaction RSBBS i can maintain a jump from a query to another query and many more thigs. But does anyone created a jump from a query to a special designed workbook. I mean: can i select a special workbook as jump target?
Regards,
AdemAdem,
I dont think so you can have a workbook as a receiver.
You have the following options
BEx Query (see BEx Query as Receiver)
BEx Web application
BW Crystal Report
InfoSet query (queries on Classic InfoSets)
Transaction (see Create Transaction as Receiver)
ABAP/4 Report
Web address (see Create Web Address as Receiver)
Check http://help.sap.com/saphelp_nw04/helpdata/en/c9/bc2d38c4b3f205e10000009b38f8cf/frameset.htm
-Doodle -
Jump Targets transport collection
Experts,
This is a question I posted in Bex and havent recieved any answers yet.
"We have a query in bex which is essentially a jump target of another query.
Assignment details are as follows
All but the following infoobject of the source query are set to type delete :
Sales Order number ->/BIO/OIME_ORDER
Item NUmber in Sales Order-> /BI0/OISORD_ITEM
Fiscal Period -> /BI0/0FISCPER
Fiscal Year Variant type is generic.
When we run the source query, and jump to this particular target query, get an error as follows:
Error Error in SQL Statement: SAPSQL_INVALID_FIELDNAME T00001~ME_ORDER
Error Error when generating the SQL statement
Error Error reading the data of InfoProvider ZXXXXXX
Abort System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Even when I run the target query(has no selection criteria) independently, it throws this errror.
The infoprovider is an Infoset which is working fine in the other environments."
Further to this I ran the query in RSRT and an exception CX_RSR_X_MESSAGE was triggered.
Since I cant seem to find answers to the above question,
My question is, the query(jump target) works fine in other instances.
Can I just send the RRI assignments through the landscape without capturing any query elements?
Also, after assigning the target queries(3 in all), I click on the 'Transport Connection'. Do I need to click on(collect) the query definitions in the transport connection? Not selecting anything, neither the query names nor the elements, I see in SE01, my transport has one element to it which is essentially the Source query name.
Is this the correct way to collect a jump target(s) assignment?
Thankshi,
try to capture all the tasks you do regarding the jump targets in one request.
changes in RRI should also be captured and transported i hope.
chk out the bex transport,that may help you.
Transporting BEx Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Ramesh -
Hi,
we have a webreport and when the user clicks on Material number it should go the R/3 system related table.
I am looking for SAP how to document on Jump target from a query to R/3 system and can anybody help suggest me a step by step?
ThanksHello,
See this doc [Report to Report Interface for SAP Business Information Warehouse 3.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9]
Thanks
Chandran -
Activation of Query jump targets
The Content activation of Query jump targets(transport object RRQA) does not work.
This problem was caused by a program error in function group RSBBS2....
Anyone please help me out as I am new to this domain....Refer to this....might help you....
BW2.0A
Import Support Package 15 for 2.0A (BW2.0A-Support Package 15 or SAPKW20A15) into your BW system.
BW2.0B
Import Support Package 09 for 2.0B (BW2.0B-Support Package 09 or SAPKW20B09) into your BW system.
Good luck.
Ravi Ranjan -
In RRI, how to locate the Jump Target for a Query
Hi all,
I want to find the Jump Targets for a particular Query. How can I find it in which table, PLEASE ?
Thanks.Hi Venkat Kodi,
If you want to use Jump Targets with R-R-I you have to explicitly create them using T.Code: RSBBS. Then select the Source Query /Source system / Target Report.
If you want to locate the Target Query already created for a particular query. In BEx Report, Right-Click and use Go to --> Target Query.
Hope this Helps,
Cheers,
Raj -
Hi,
is there a way to define 2 jump targets in one query.
For example you have 10 Lines, and the first 5 have one jump target if you click on
a field and will jump to queryT1 and the last 5 lines have another target for the field and will jump to queryT2.
How can I do this, maybe someone knows a tutorial or something...
Thanks
Edited by: alto on Jan 13, 2012 11:24 AMHi
I think u can't achieve that because all that data are present in the same query o/p so how can u jump from one data to another data .
Regards,
RaviChandra
Maybe you are looking for
-
Will my iphone 5(ios 7 installed) support Oscium's Wipry device if I buy 5pin lightening to 30pin lightening converter from apple store?
-
Using MacBook Air with plugged charger
Hi, in the next 2 month I have to work only on my macbook air. I have set it up on my desk directly connected to a second montior. Now my question is should I unplug the charger if the macbook is fully loaded, or should I always connect my charger?
-
Printing or Exporting Detail View
I am unable to export a Detail View sheet to PDF, as it separates the two columns onto two pages instead of printing them together on the same sheet as it shows in the preview. After a couple of hours speaking with tech support, they were unable to r
-
ICloud not syncing numbers but is syncing pages
My iPad is getting updates for documents created using pages, but not for numbers from the icloud. Any ideas?
-
How do you replace a color with transparency in Elements 12?
I've gotten this far but is there any way to make it so that I just have the black drawing with the white background transparent? I am going to put the drawing over another image so obviously I need to get rid of the white!