Jump to slide "X" when failed the quiz.

Hello,
I'm testing a quiz I have for a project. When the participant passes the quiz I just set it to "continue" and the close project. Works without any problem.
The issue is instead with the participant failing the quiz. I've set it to "Jump to slide X" so he/she can do the course from the beginning. When I test this it works fine the first time, when I then do the quiz again and fail and want to jump back to the beginning I get a blank slide. Any ideas on why this happens? I've tested several times and always get a blank slide on the second time around.
I'm using Captivate 5.
Kind regards,
Patrik

Hi,
Thanks for the reply.
I have the option to retake quiz as well. I would like to give the option to retake the whole e-learning as well.
I did a work around where I inserted a slide after the quiz result where I have a button which takes me back to slide 1. That works as planned, but it would be great to reduce the number of clicks.
Kind regards,
Patrik

Similar Messages

Replay module from the first slide when user failed the quiz.

Hi, I m using SCORM 1.2 settings for my project and i uploaded it on moodle , i want to replay the module from first slide when user failed the quiz. which settings i use? please help me with the same.

When reporting to LMS it is the LMS that takes care of bookmarking, wondering if this is possible within Captivate itself? I don't know Moodle, but did you check the settings there?

How do i prevent a slide that is after the quiz results page from showing?

HI guys, I am trying to achieve the following in Captivate 6:
1) Users answer questions. They have 2 attempts to pass with 70% or above.
2) At the quiz results page, if the score is less than 70%, users get a button to retake the quiz. After the second attempt, If the percent is 70% or above, they can click a button to view a certificate or click a button to see a transcript. If the percent is less than 70%, they click a button to get a transcript but NOT a certificate.
How can i accomplish this since i cannot add buttons to the quiz results page.

Thanks for the feedback.
I am trying to implement a simple hide/show routine and it does not work. This is what I want.
I have two buttons (one to save a certifcate and one to save a course transcript). I want to display those on the quiz results screen. The user has two chances to make a 70% or more on the quiz.
If the user obtains less than 70% score on the first try, on the quiz results slide I want to hide the button to save the certificate but keep the one for the transcript. If the user passes with 70 or more, then both icons remain on screen.
IF the user obtains less than 70% after the second try, the quiz results should only show the transcript button. If they pass with 70% or more, then both icons remain on screen.
I tried advance interactions to hide or show the icons in the "on slide enter" on the quiz results screen but that did not work.
This is an example of what i tried. if cpQuizInfoQuizPassPercent is less than 70% hide btncert. I also tried hiding the button and then assigning actions to show the button on passing the 70% but that did not work either.
Suggestions?

Jump cuts to beat when NOT the first clip

Hi I want to add jump cuts to a sound clip that is not the first one in the project.
After a lot of false starts in trying to get jump cuts onto a clip when the music was just
(a) attached to an exisitng film clip (green underneath the clip) - Won't work. or
(b) a pinned - sound clip first, movie clip second but where the sound does not butt up against another background clip (wrapped in purple) - Won't work
I've got it to work where it is background music - sound first, movie second (wrapped round in green). I've opened up the Clip Trimmer, added the beats on the beat with the 'M' key - highlighted the movie cliip - selected Clip>Jump cut to Beat Markers> chosen a frame rate BUT only where the background clip is the FIRST background.
If you add more songs to a project and go through the same sequence as before the number of frames is not greyed out but the app just doesn't do anything. All the tutorials online only ever show you adding jump cuts to the one and only music track but never to the second one.
This is v. frustating. Sounds like a bug to me.
Is there a way of breaking up the project so that it will play as one continuous film and so allowing different parts of the film to be the first piece of background music?
Thanks.

Hi Ameer,
Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
Regards,
Satyendra

How do I jump to a custom slide after passing or failing a quiz?

Hello!
I've created a very simple linear course in Captivate 6 with a 10 question quiz at the end. What I am trying to do is if they pass the quiz, they will view a celebratory pass slide, if the fail the quiz they will see a different slide. Then the course ends. I've set the pass/fail options under Quiz preferences to jump to slide # "x" if pass/fail, but it doesn't seem to be working.
The only other fancy thing I have going on is I have a set of knowledge checks thoughtout the course that I have attached an action script to so they won't count in the Master Quiz at the end. I don't know if that script would affect not being able to jump to a slide at the end.
Thanks for any help you can offer!
-Tiffany

You know what, about 30 seconds ago I figured out what I did. I set the Quiz preferences to “Required to pass before continuing” instead of “Required to take quiz”.
I am sure Action Script is the wrong term (I’ve only used Captivate for 2 weeks). I applied an Advanced action to skip over the knowledge checks. I got the tutorial from this link:
http://blogs.adobe.com/captivate/2011/07/excluding-knowledge-check-questions-when-reviewin gretaking-the-quiz.html
Thanks for replying!
Tiffany Robinson│Instructional Designer│Design and Development Team
Email: [email protected]<mailto:[email protected]> │ Phone: 386-218-3577
Check out thousands of free books and reports from Books 24x7 in the Kelly Learning Center!
Kelly Services, Inc.

Retake a module with only the quiz.

I am currently working on a module that has the quiz in two parts, seperated by a number of slides. At the end of the module, should the user fail the quiz, I would like to give them the opportunity to retake the quiz without having to go through the whole module. Getting back to the first section of the quiz is easy, however, skipping the slides between the first section of the quiz and going directly to the second section of the quiz is the challenge. I've tried a number of advanced actions (too many to write down), is what I want to do even possible?

Hello,
Just an idea, did not try it out because I have to teach in a few minutes. I would insert a very short blank slide after the first Quiz part (will not be visible to the user). Initiate a variable with value=0 at the start of the CP-file (on entering first slide p.e.). When entering the blank slide, increment this variable with 1. So after the first attempt for the quiz this variable will have the value=1. On exiting the blank slide trigger an advanced action, a conditional statement where you check if the variable>=1. If Yes jump to the second part of the Quiz (jump to slide), if No set at Continue.
Thinking that this will work, even when you allow a third attempt...If the script causes you problems, could post more extensively this afternoon (8:45 AM over here).
Lilybiri

After a quiz can you show the questions and answers for the user to review from passing the quiz

After taking a quiz, is there a way to show the questions and answers for the user to review from passing the quiz.
And the ones who has failed the quiz would be directed to the first slide again to take the quiz over.
Thanks

Rod
I see that information about adding the review quiz button but on that last slide where it shows results, I want it jump back to slide 1 but it jumps to the first question of the slide. Is there a way around that?

Navigation when reviewing a quiz

Hello,
I have created a quiz in Captivate 3, and enabled the review
functionality in Captivate. Upon completing the quiz, on the score
page is the the option to review the quiz. Upon pressing this, it
goes to the first question properly and displays everything
properly. My issue is not being able to go on to the next question.
The only button I am using in this quiz is the submit button. This
button does appear on the review screen, but is not active. I don't
see any means of editing only the review screens, like adding
buttons to just these slides. I have a feeling its right infront of
me, but after a couple hours of hunting and reading, I figured I'd
throw the question out there.

Hi,
In order to move forward in the review screens, you must have
'show skip button' selected in the quiz slide options, which will
display a skip button on each question slide.
And in the Quiz settings, select 'Allow user to review quiz'.
You cannot have a button, just on the review screens, as they
are, in effect, one of the same, with the review view simply
showing the correct answer / incorrect selection.

Click Box - Jump to slide error

Captivate v5.5
I have put a click box on slide 1 to allow users to my "Skip Intro" (slides 1-4) and jump to slide 5.
Whilst the click box does jump to slide 5 - the audio on slide 1 continues instead of the audio on 5.
I have tried using a button (instead of click box) and that works just fine - but problem with using a button is, I want slide 1 to continue to slide 2 etc by itself if the learner does not click "Skip Intro"
Does anyone have any suggestions what might be causing this.
NEL

Brilliant....Works a treat!
What I dont understand is I have used click boxes many times before to jump to slides and have never had this problem before - audio from original slide continues to play after jumping to a new slide - so wonder why this has just started. Any ideas (just for my own education).
At least I now know what to do.
Many thanks.
Noel

Why does "Jump to Slide" action disable the quiz slides?

Here is what I have setup:
I have a Captivate 4 program using AS 2. The program is a total of 23 slides (quizzes and tutorials). The program is broken into 3 lessons with one of the slides set as a menu slide. Each lesson button on the menu jumps to the slide that is the first slide of that lesson. At the end of each lesson I have a completion slide with a menu button that jumps back to the menu slide when it is clicked.
Here is the problem:
When I start the program and complete any of the lessons and return the menu, none of the question slides work in the remaining lessons. The question slides show up, but the radio buttons and submit button are no longer active on those slides. Its as if the program thinks the slide is complte, but nothing is selected. I have narrowed the problem down to the “Jump to Slide” action that I use on the Menu button in the lesson completion slides. If I would complete the program in a linear way without jumping back to the menu slide I don’t seem to have any problems. The problem seems to only occur when I jump backwards through the slides.
Has anyone else had a similar problem? Is this a bug with Captivate or am I missing something?

Hi there
The unfortunate fact is that question slides work best if you can place them all in a linear fashion where you move from one to another without ever going backward. We often see posts here where things fail to work when you choose to jump backward and forward in the movie.
Perhaps one workaround would be to force a specific order of progression. Sprinkle the "menu" slide so it follows each segment. That way you could also easily implement something like check marks or a progress indicator to show completion of the segment.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Submit button disappears when returning to the quiz slide

Hi everyone,
We just upgraded from Captivate 4.0 to 5.5. I'm learning 5.5 differences from 4.0 and have one that I can't figure out.
On the quiz slides, if the learner moves back and forward within the quiz slides, the quiz buttons are fine. However, if they click Back on the 1st quiz slide, then go forward to the quiz slide the submit button flashes briefly then disappears for that slide and all the other quiz slides. I can't find a setting to fix this.
Any suggestions or thoughts would be appreciated. Thank you.

Sounds like a quiz scope issue. If you click back on the first quiz slide that would take you to the slide BEFORE the first quiz slide which is technically outside the quiz scope. This usually results in Captivate locking the quiz.
I haven't personally seen this button disappearing act but you can test whether quiz scope is the likely culprit by adding a scored click box to the first slide of the project, which will then extend the quiz scope out to that slide. If this prevents your quiz slide buttons from disappearing, we know where the issue comes from. That may mean you have still found a bug that needs to be fixed though.

CP4: slide stuck if user skips the quiz

Hi,
Wondering if anyone could shed some light on where I'm going wrong here. I've got a CP4 project with some instructional slides at the beginning followed by few question slides.
Although these question slides are the "graded" type, I wanted to give the user the ability to retry the questions as much as they like, because they are to be a practice of what they've learnt rather than assess. To achieve this I've set each question slide with "inifinite attempts" option, also set infinite attempts for the quiz preference - "if failing grade" option - so that the learner can revisit the information slides and retry the questions. I've also set the quiz requirement setting as "Optional - the user can skip this quiz" so that users can just browse through the questions without trying them. The "show score at end of quiz" option is disabled (screenshot) because I don't want to show a score as these questions aren't suppose to be assessed.
After the question slides I've got an information slide (let's call it slide 'F1') with just "back" and "next" buttons. The back button goes to the previous question slide and the "Next" button is set to go to the next (let's call it the 'Final slide') slide, which also has a back button. Simples....well that's what I thought.
When testing this project in action, I noticed a small navigation issue. If I skip through all the questions (by pressing the Skip button) and get to slide F1, the next button takes me through to the final slide on the first attempt. Then I clicked the "Back" button on the final slide to come back to slide F1, and now when I click on the next button on slide A1.... the next button is not working. I can't get back to the final slide!
This doesn't happen if the user actually tries the questions. Even if they get all the questions wrong (or correct) this issue doesn't happen. It only happens if the user skips all the questions.
It does sound like something I've got wrong on quiz preferences, but I can't figure out what because I've got the "Optional - the user can skip this quiz" option selected. I even created a whole new sample project from scratch (with standard buttons, question slides, etc) yet this issue is still happening. I also tried the preview mode, publishing with LMS reporting (SCORM 2004 and SCORM 1.2), publishing without reporting, etc, but the issue is stilll there.
Any ideas of what I'm doing wrong here - will be much appreciated. Also let me know if it'll help having a look at the sample project with this issue. I'll arrange some way to send the project to you.
Many thanks

Hi RodWard,
Thanks for your reply
The main reason why I didn't go for the survey type questions, because I wanted to use the instant feedback captions available on graded questions (if correct or if wrong) to give more information to the users when they try a question. On Survey type questions you don't get that option by default. Is there a way that you know of that I can get these kind of feedback captions on survey type questions?
That 'quiz scope' you mentioned on your reply - I think that is the cause of this issue. Shame that it is still looking for completion of the quiz, while the option "Optional - the user can skip this quiz" is selected.
It looks like the best way to workaround this is to create my own question slides with click boxes, buttons and advanced actions (rather than using the default question slides).
Thanks again for your reply RodWard - much appreciated.

Captivate4 - jump to slide fails

Have 3 quiz slides in 30 slide presentation. 1 quiz jumps to correct slide on failure, other 2 continue to next slide on failure.

Hello,
When using Question slides, you can never get out the scope of the Quiz. And perhaps one of your 'jumps' was outside of that scope, which starts with the first thing to be scored (can be a Question slide or a scoreable object like a button, click box, TEB) and ends with the Score slide. Could you check that scope, try the Avanced Interaction view (Project menu)? If you want to jump to a slide during a quiz, it has to be in this scope.
Hope this makes sense?
Lilybiri

Cannot clear answers in quiz after returning from jump to slide.

Hi, I apologize if this has been answered previously. I couldn't find a thread containing the information.
I recently upgraded from Captivate 6 to 8 (yes, I know...) and when I created the quiz for this project, I have the learners who answer the questions incorrectly going through remediation using the jump to slide on last attempt. The jump to works fine and returning to the quiz works fine. However, when the learner returns to the quiz, the previous incorrect answers are still displayed and the clear button is non-functional. This doesn't allow them to revise their answer and move forward.
I compared it to a similar project that I created in Captivate 6, and it seems that all the options in the quiz preferences and the question's quiz properties are the same, yet it is working properly in the Captivate 6 project (even when previewed in Captivate 8).
Am I overlooking something simple here?
Thanks!

Indeed, the On Exit event is not to be trusted at all, you need an
interactive object, that gets a double functionality. In the video it has
Continue or Return to Quiz, but you can also use 'Go to Next Slide' instead
of Continue. Sorry that I didn't point immediately to that video. It is
short but pretty clear.
2014-12-18 20:45 GMT+01:00 christellek <[email protected]>:
Cannot clear answers in quiz after returning from jump to slide.
created by christellek <https://forums.adobe.com/people/christellek> in *Adobe
Captivate* - View the full discussion
<https://forums.adobe.com/message/7027618#7027618>

I use MacbookPro late 2011 with Maverick, when i put iPhone 5 or another cellphone askew on left corner of touch pad and slide it to keyboard, the macbook will sleep, i don't know what the problem is, it occur on another macbook pro late 2011

I use MacbookPro late 2011 with Maverick, when i put iPhone 5 or another cellphone askew on left corner of touch pad and slide it to keyboard, the macbook will sleep, i don't know what the problem is, it occur on another macbook pro late 2011

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

Jump to slide "X" when failed the quiz.

Similar Messages

Maybe you are looking for