Jumper settings for WD caviar hard drive

Hello There,
I want to put a new hard drive in my iMac CRT but am a bit confused by the diagram on the Western Digital 80Gb drive I have bought. The drive that is fitted at the moment has the little jumper thing across the two end pins, as does the seagate one I fitted in my other iMac not long ago (I just set it like the one I swapped it with). The diagram on the WD drive gives me lots of options, cable select, slave, master only, etc. Which one is right for my iMac - (it has a CD-RW, I don't know if this makes a difference). Thanks

According to Apple for the 600MHz iMac the Hard Drive should be set as Master. (Reference - Click Hard Disk Drive on the left hand side.) 
mrtotes

Similar Messages

  • Jumper Settings for Second SATA-II drive Installed Into Dual 2.0Ghz G5

    I have installed a second SATA-II 500GB Maxtor drive into a brand new (purchased as re-furbished computer from Apple) dual 2.0Ghz PowerMac G5. The drive has four connector pins with a jumper slide over the last pin on the right. Before I power up the computer I want to verify the correct jumper settings. According to the Maxtor website, no jumpers are required since the "serial ATA host automatically determines the master and slave hard drive." And according to a MacSales tech (this is the vendor where I purchased the Maxtor drive) I should pull off the existing jumper. Can anyone verify if this is, in fact, the correct jumper setting (no jumpers on the connector pins) for this drive on this system?
    G5 dual 2.0 Ghz   Mac OS X (10.4.8)  

    Hello! From the Maxtor web site.
    "PLEASE NOTE: Unlike standard ATA drives, Serial ATA drives DO NOT require the use of jumpers to configure the drive. Please disregard any references to jumper settings and Master, Slave and Cable Select configurations in the Maxtor Installation Guide."
    I'd leave the jumper as is came when you got it. tom

  • How do I change NTFS settings for my external hard drive in Mac and PC

    I recently purchased an external hard drive
    SAMSUNG (Model No NM-0802)
    when i plug the USB cable it will not display on the desktop of my mac
    I operate on MacBook Pro and Mac OS X Lion
    On the other hand, It is detected in the Disk Utilities pane and is currently set as NTFS format
    how do i reformat it to work both in PC and Mac?
    thx in advance

    Shootist007 wrote:
    I have never had any problems with a drive formatted FAT32 or exFAT on a Win PC when connected to a Mac.
    Would you please comment on these two links
    <http://krishaamer.com/2011/07/10/exfat-mac-pc-compatible-disk/>
    <https://discussions.apple.com/thread/2767345?start=0&tstart=0>
    (The second one is referred to in the first item.)
    Wouldn't you think a MS OS knows how to format a drive correctly using that format, I do. It is Apple Mac that is not doing it correctly.
    Kindly note that the word "correctly" does not appear in my post. I'm not quite sure how the statement,
    "the Mac OS X exFAT filesystem implementation is not compatible with Win's default cluster size for exFAT"
    can be interpreted to suggest that any OS is not "doing it correctly".

  • ITunes Settings for Media on External Drive via Airport Extreme...

    iTunes Settings for Media on External Drive via Airport Extreme base station versus plugging directly into laptop.
    My current configuration is that my iTunes Media (700gb) are all stored in an External Drive that's plugged into my Airport Extreme Base Station. This works great for me having wireless access to my iTunes external drive.
    Whenever I need to back up that hard drive with Time Machine, I just plug it directly to my laptop...
    But how do I let iTunes (or iTunes library) know that this is the same hard drive where all my media is stored when it's plugged directly into the laptop as opposed to trying to access it from my Airport Extreme network?

    No there isnt any files call library in the folder i created I am now in the process of copying them back but I guess I will loose all my playlists and playcounts. I do have a Copy of my drive that i made with carbon copy cloner. So maybe it will be best to boot from there, restore and start again.
    Chris it was just the media folder. I was following the instructions on the apple support page. Got to point 14 didn't get the warning but did seen to have a brand new itunes, so emptied the trash as they said expecting everything to be fine but it wasnt.

  • How do i make a seperate itunes library for an external hard drive?

    my brother bought an external hard drive to have his own itunes library. We attemted to download the program into the ex. hard drive. but what it did was transfer all my music to the ex. hard drive. So we undid it, and now its back on my computer. So what can i do to have a seperate library for the external hard drive?
      Windows XP  

    Choose Go to Folder from the Finder's Go menu, provide ~/Music/ as the path, drag the entire iTunes library to the external drive, and if desired, then to the iMac's internal one. If you put it in a different location than the default, launch iTunes with the Option key held down and point it there.
    If the library contains rented movies, those won't play on a different computer.
    (110641)

  • Solutions for lots of hard drive space?

    Yes, this is a repost from my thread in the getting started forum, but I figured that this board is more heavily populated, and perhaps some professional videographers visit here more frequently to help me out, so I'm posting my question here as well. Here I go:
    Hello,
    Next spring and summer, I plan to be shooting and editing weddings. The past weddings I've done, I use about 12 tapes. ~200mb/min x 60 mins x 12 tapes is about 144GB. That's about 3 weddings in a single 500GB hard drive (and I plan on doing about 20 in a year). Obviously, I'm going to need a LOT of hard drive space. I don't want to consider entirely deleting the media after finishing a project because it seems common that clients wish to change little bits of the video, so I want to keep them for a while longer.
    Right now I have a 500GB HD in a firewire400 enclosure. I don't use the internal Mac HD for media.
    What a photographer said that others wedding videographers do and suggested to me was to buy as many HD's needed for the year (approx. so I guess about 7 if 500GB), set a deadline for those whiny clients for returns or re-edits and such, and at the end of the year, and reformat them all and reuse them for the next year.
    I'm thinking of doing the same, but using the same enclosure for all my hard drives, just unplugging and plugging as needed.
    I've heard of using a RAID system. I can't say I know much about using it but with what I'm using, I don't think it's an option? I am using a 17" 2.33ghz MacBook Pro with Final Cut Pro and I plan on getting an aluminum 24" iMac (probably 2.4ghz unless you can convince me otherwise) as a secondary editing machine, and perhaps to make the dreadful capturing process twice as fast.
    So some of my questions are:
    * can plugging and unplugging HD's to an external closure possibly damage the pins?
    * would storing HD's that are not being used at the moment be safe in those plastic containers that usually come with a HD when you buy one? Or would it be damaging to keep one in there and store it away for a year?
    * is this idea okay or would you suggest another method?
    * slightly off-topic but sometimes I take my external hard drive, put it in my laptop bag, and do some editing at another location. I know it's supposed to be portable but someone told me that external hard drives aren't meant to be taken around like that. Is that true or am I okay? It's just sitting sideways in the bag while I walk/drive, it's not like I'm hiking a mountain and dropping my bag.
    Thanks in advance for all your help.

    321estrellas wrote:
    - I wonder if enclosure manufacturers do special orders of JUST the enclosure without the cables and power adapter? Since I'll likely be buying the same one but plugging one at a time...(maybe one other for another computer)
    Not sure if they will or not. Of course, IMO, it is not bad to have an extra Power Adapter and cables (or more), just in case. You would be suprised how things can get misplaced or when you really would like another FW or eSATA cable. You can call some of these places and ask, it nevers hurts. I have had very good experiences with Firewiredirect, OWC/MacSales and Wiebetech, probably worth a customer service IM window with them or call or email. Worst they can say it is not possible.
    - Alternatively the Wiebtech SilverSata I enclosure seems pretty convenient and maybe I'll expand it with 6-8 additional trays...but again I may want to use another HD in another computer but I'm sure I can figure a way around that...
    If you get a G5 or MacIntel they all use the same drives so if you remove it from a tray you can put it in the computer. I like the SilverSata I because it is relatively small and light and I will often throw a 750gig Drive into a tray when traveling to have a place to capture things and keep copies of photo downloads, audio files for Soundtrack and other files which take up room and a partition for a boot/repair/restore disk for the laptop.

  • Is it time for a new hard drive?

    My iMac early 2008 has been running extremely slow even after i reduced 320 gb hard drive so it only has about 150 gigs occupied now. 2 GB memory.  I just ran Disk Utility and it said it "stopped verifiying MacIntosh HD. This disk needs to be repaired. Start your computer with another disk." I haven't done that yet. I have everything backed up on Time Machine to an external hard drive. A friend says the HD is going bad and needs to be replaced. Is that right? All advice greatly appreciated.

    From the given information I'd find a more knowledgable friend. The first thing you need to do is repair your drive:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the above indicates the drive is OK after repairs are completed, then you can focus on some maintenance to help improve performance:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation.  TechTool Pro 4.5.1 or higher are Intel Mac compatible;  Drive Genius is similar to TechTool Pro in terms of the various repair services provided.  Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.  Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    If none of the above help then try reformatting the drive and installing a fresh copy of Snow Leopard.

  • Moving Garageband Music Files to MyBook for Mac External Hard Drive on OSX 10.5.8  I'm a musician and need to make space on my mac hd. Is it safe to move music files there and delete them on the mac? Thanks!

    use a MyBook for Mac external hard drive.
    I need space on garageband or the entire hard drive, since I am getting the "need space on the hard drive" messages.
    It's scary to move my precious music files!
    How should I move them to the external and feel safe about doing so?
    Or are there other methods besides the obvious, clearing caches, deleting the trash and downloads, etc., that are recommended?
    I am doing music now and producers are waiting for the new vocals!
    Help!
    Thanks!

    The process is as simple as just copying your Garageband project to the external drive and deleting from the macs hard drive. But before you delete anything you really need to back them up to someplace else also. Having just one copy is not safe. Get another external drive, DVDs or even flash drives, you absolutely need anything important in more then one place.

  • What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
    One option is MacDrive for you PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/
    More options...
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930

  • My Passport for Mac external Hard drive is not recognized

    I recently had to purchase a new MacBook Pro, and when I tried to get files off of my Passport for Mac external hard drive.  I get an error stating "The disk you inserted was not readable by this computer."  And when I try to initalize, and verify disk, I get this message "Partition map check failed because no slices were found.".  I have already updated firmware for the external hard drive.  One site I found stated that it could be that the USB port is not strong enough, and I would need a 2.0 Booster cable.  Does anyone know if this would work? 

    What did you old Macbook die from?  Likely the HD in it is still ok,  yes?
    You can remove the HD inside your old dead Mac and put it into a $20 HD enclosure or HD dock, and remove the photos that way, very easy.........IF your old Macbook died from something other than ALSO a bad HD.
    You said----my OLD Macbook pro which recently lost video
    What happened with your old "dead" macbook?  Still have it?

  • I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? One I back everthing up on the TC, can I delete everything off of my MAC?

    I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??

    Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
    TC was designed to backup your Mac. The TC literature is pretty clear about this:
    If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
    But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
    Have you thought about what will happen when....not if....the TC has a problem?  Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
    A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
    Then, the TC will backup both your Mac and the hard drive.  So, you have original data on on one drive and backups on another drive.
    That would be a minimum backup plan. Most of us have more than one set of backups.

  • What format is best for an external hard drive for video editing on a mac?

    What's the best format for an external hard drive for video editing to be use with a mac only? I need to format my new hard drive and want to be sure I choose the right format.

    I concur with Kappy. His suggestion is correct.
    Allan

  • I want to use the Thunderbolt connection for an external hard drive

    I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor.  Thank you!

    This is not the forum for MacBook Pro owners.
    You just need to reformat the drive in Disk Utility and erase the drive and have  Mac HFS.
    If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
    Or buy something that isn't pre-formatted to Windows NT file system.
    First though make sure you have backups of your system. TimeMachine being used now?
    http://macperformanceguide.com/Mac-TimeMachine-drive.html
    http://www.apple.com/support/timemachine/
    Maybe cleanout some files you don't need.
    Install a larger notebook hard drive even.
    http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

  • Can anyone help me with advice for a replacement hard drive

    Hi there,
    Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
    Its 3 years old & running Snow Leopard 10.6.8
    I do a lot of audio & movie work so performance is important.
    The logic board was replaced last summer & I was advised to replace the hard drive then...oops
    Anyway it has limped on until now but is giving me cause for concern...
    I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
    http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
    http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
    Kind regards
    Nick

    Thanks guys that is so helpful :-)
    I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
    & yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
    All the very best
    Nick

  • Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?

    Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
    This question was solved.
    View Solution.

    Gurra wrote:
    Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
    Hi,
    The right part number for the hard drive kit is 681976-001. The support website for the laptop is on HP Sweden so run the part number on google.co.uk (or your Swedish). I have found the cheapest on us amazon for $38 or £42. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Maybe you are looking for