Jumping back and forth, probably because some keyboard shortcut.

this is the 3rd time i m typing this is it keeps going back for no obvious reason. i wrote that i think it go something to do with the backspace button as it is used for going back, but sometime it does it without the backspace. just minute ago i started typing "happening" and it jumped 3 pages back. sometimes it causes what i wrote to disappear, anyway, it drives me nuts.

Try http://kb.mozillazine.org/browser.backspace_action

Similar Messages

Is it better to use just one project or to jump back and forth?

Greetings,
I am using Captivate 4. And I am wondering if it is better to use just one project or to jump back and forth?
I have one main project and rather than make one big project, I wondered about jumping off to small projects and returning to the main one.
I was trying to figure out the suggestion of jumping back to slide 10 and jump off to another project and then back to slide 20.
Do the projects have to be published to see this work?
I am just learning about Captivate so I am unsure of the best practices.
Thanks.

It's not that easy in Captivate projects to jump to a particular slide midway through another project. Captivate is set up by default to just launch each project from the first slide.
There have been workarounds published on this forum that allowed jumping into the middle of another project, but they can require some complex coding in either JavaScript or ActionScript.

Compressor frame count jumping back and forth

Hi guys,
I've never noticed this before, until last night when compressing a 25-minute film in Compressor at 'DVD-90 minutes, high-quality'. What in the past on this film might take an hour or so, last night took about 14 hours (i.e. all evening and through the night).
Compressor was advancing through the frame count, but then would return to an earlier frame, then jump forward through the frames again, then jump back to 10 or so frames earlier, advance forward, go back, etc. It took ages for it to get through a dozen frames or so.
It seems to me in the past when I observed Compressor, it works its way consecutively through frames, advancing forward one frame at a time.
I guess Compressor was reinterpreting data from an earlier frame, but is this normal? My film only has one of two video layers, up to 8 audio layers, some imported Motion QT files, and a very large PICT image file (scrolling end credits).
When examing the frame count where Compressor seemed to get bogged down, it appears it was towards the end of the 25-min. film (around the 42,000 mark). It seemed to be stuck there, jumping back and forth all night. Must have been when it was trying to digest the PICT end credits... Eventually it did complete the task and the export was OK.
If Compressor is having problems with the PICT (?), perhaps I'll test this out by putting my end credits on a seperate FCP sequence, export them as a QT file, then re-import that back into my film and see if Compressor is happier...
Any thoughts?

Ongoing changes? What do you mean exactly? Anytime you add filters to a clip and render you are slightly lowering the quality...slightly. But exporting, expecially via Compressor, will add even more. How many changes are you making?
Shane

Firefox jumping back and forth in time Mac

I have the most up-to-date version of Firefox (11.0 if I recall correctly) and Mac OS X 10.6.8 (Snow Leopard) updated on my . I have just recently been having an issue where firefox seems to jump back and forth through time. The time difference is at most a minute or two, but it gets very frustrating.
For example, while I am writing this question, Firefox will jump back to a point where only half of the first paragraph is written, jump back to the 'present', jump back a bit, and then return to the 'present'. This happens with scrolling through websites as well.
I updated yesterday because I bought Diablo III and wanted to make sure everything was current to let it install smoothly (which it didn't... >.<). I noticed upon the restart that my background will switch to a blue background from my picture. When I try to change the background back, it will revert to the blue background after 5 seconds or so. Perhpas this is related to the Firefox issue?

I have the most up-to-date version of Firefox (11.0 if I recall correctly) and Mac OS X 10.6.8 (Snow Leopard) updated on my . I have just recently been having an issue where firefox seems to jump back and forth through time. The time difference is at most a minute or two, but it gets very frustrating.
For example, while I am writing this question, Firefox will jump back to a point where only half of the first paragraph is written, jump back to the 'present', jump back a bit, and then return to the 'present'. This happens with scrolling through websites as well.
I updated yesterday because I bought Diablo III and wanted to make sure everything was current to let it install smoothly (which it didn't... >.<). I noticed upon the restart that my background will switch to a blue background from my picture. When I try to change the background back, it will revert to the blue background after 5 seconds or so. Perhpas this is related to the Firefox issue?

Firefox jumps back and forth between time?

I have the most up-to-date version of Firefox (11.0 if I recall correctly) and Mac OS X 10.6.8 (Snow Leopard) updated on my . I have just recently been having an issue where firefox seems to jump back and forth through time. The time difference is at most a minute or two, but it gets very frustrating.
For example, while I am writing this question, Firefox will jump back to a point where only half of the first paragraph is written, jump back to the 'present', jump back a bit, and then return to the 'present'. This happens with scrolling through websites as well.
I updated yesterday because I bought Diablo III and wanted to make sure everything was current to let it install smoothly (which it didn't... >.<). I noticed upon the restart that my background will switch to a blue background from my picture. When I try to change the background back, it will revert to the blue background after 5 seconds or so. Perhpas this is related to the Firefox issue?

Zyel14 wrote:
I have the most up-to-date version of Firefox (11.0 if I recall correctly) and Mac OS X 10.6.8 (Snow Leopard) updated...
Same specs here, but not seeing the issue you are describing, I suspect yours is a isolated issue.
For example, while I am writing this question, Firefox will jump back to a point where only half of the first paragraph is written, jump back to the 'present', jump back a bit, and then return to the 'present'. This happens with scrolling through websites as well.
Well lets eliminate Firefox and the add-ons/plug-ins as a possibility first.
1: User Firefox to uninstall all add-ons, then uninstall FF.
2: Use Safari to check the status of your Flash and other plug-ins using this site
https://www.mozilla.org/en-US/plugincheck/
3: Install FF again, then install your add-ons over time, one at a time, to try to determine when the problem occurs.
I updated yesterday because I bought Diablo III and wanted to make sure everything was current to let it install smoothly (which it didn't... >.<). I noticed upon the restart that my background will switch to a blue background from my picture. When I try to change the background back, it will revert to the blue background after 5 seconds or so. Perhpas this is related to the Firefox issue?
Sounds like another issue, but localized to that particular account.
Create another user in System Preference and see if it continues there as well.
You can delete your
com.apple.systempreferences.plist
file in your User/Library/Preferences folder and reboot, the file will be recreated minus your preferences which you reset.
Also download and run all of the free OnyX's mainatainance and cleaning aspects and reboot at the end (must), your machine will get a enema of sorts that might clear up the glitch.
http://www.titanium.free.fr/
I answer a lot of posts, however because of the volume here and other factors, posts can drop off the page and disappear, if you want a follow up, you'll have to assist so I get a email, but I'm not allowed to ask for something.

How to jump Back and Forth?

In C, we can use the "goto" keyword in combination with a label to jump back and forth to anywhere within a method. However, how do I implement this mechanism in Java?

Take a good book of structured programming and they'll tell you the answer: You don't!. If you are so eager to do it anyways, you can do it with pseudo-loops. But don't blame me if you can't read your code after two days:
l1: do {
continue l1; // jump back to beginning of loop
break l1; // jump behind the loop
} while(false);

When I open certain emails the scroll bars at the side and bottom flash and jump back and forth along with the email content

I recently upgraded to the latest version of Yahoo mail. Ever since then when I open certain emails the scroll bars jump back and forth and flash. This happens when I open my AT&T bill or something from Amazon for instance. A message appears at the bottom such as "Transferring data from mail.yimg.com", or "us.bc.yahoo.com". This doesn't happen when I use Safari.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

IOS 5 Update, wait, re-connect, back-and-forth may solve some things...

I just updated an iPad first generation (iPad 1) and I was going to scream as my Mac Pro iTunes showed no music, videos or photos.
I was luckily surprised to see that my Apps were kept in their own folders. (I have close to 250)
I disconnected the iPad.
Opened the new 'Music' app and it said 'No Music'.
Opened the new 'Videos' app and it said 'No Videos'.
I was very frustrated. I re-connected the iPad to my computer and I saw the music and video playlists in my Mac Pro iTunes. I could play the vidos and music from my desktop computer, but I could not find any in my iPad (iTunes was showing all of it was there, just not the iPad)
As I started to write feedback to Apple and trying to do some screenshots in my iPad, I suddenly saw that some playlists showed up. Then the videos showed up. I would say that it seemed like maybe the iPad and iTunes try to do some checking or sync in the background and suddenly somethings just show up. I am not sure if this is what happens or not.
Currently, many of my songs are missing their album artwork (album covers) in the 'Music' app. I can see these album covers in my desktop iTunes. I know that these songs are from my personal CD's I have ripped or Music I have downloaded from other services. Like I said, the artworks is showing fine in iTunes, and was showing fine previous to the iOS 5 update, so what's wrong?
Let's share more tips, insights and help with the Music artwork, playlists and videos.
p.s. By the way, very annoyed that 'Newsstand' is an App you cannot drop inside a folder or group. iBooks, Messages, Reminders and AirPort Utility can be dropped inside folders/groups, why does Newsstand has to be a top icon?
iOS 5 Updated
on Mac Pro running 10.6.8 (I'll have to wait more reports or more solid Lion, Maybe I'll update when Wolverine is here ;-)

i have 3 problems listed below while using iphone 4s with ios 5.1 version
1. The screen goes blank(dark screen) when i try to call back (i.e redialing 2-3 times). then i have to press home button and once again i have to press call button(sometimes green layer which will be on top of the screen) and press red button to close the call and try once again.
2. Sometimes my network drop zero then start searching network then display no service for few second and then the network once again appear (no issue with the network provider i checked with other phone which is working fine)
3. When there is incoming call the people on the other end of the call (caller and not me) cant hear for first 2-5 sec (i did a count..ha..ah) they wont be able hear.
Is it clear now buddy....

Eclipse: Jumping Back and Forth

I often use the built-in <F3> shortcut to jump to a method or class definition, which is a useful feature.
Then I want to jump back to where I just came from. Is there a way to do that?
Thanks,
John

I don't know of a hotkey (doesn't mean there isn't one) but there are little yellow arrows on the toolbar to do this.

For a few months now my ical keeps jumping back and forth. It's very hard to use my calendar as it doesn't open on today, it may stay a few seconds and then it goes backwards to random dates and forwards. It doesn't sit still so I can see what I have on

My iCal is driving me nuts.
It won't sit still when I am looking at my calender. I try holding it still with one finger, two fingers and it just moves. It jumps to random dates and I have no confidence in it any longer. I use my calendar all the time and this just isn't good enough.
I have gone into the apple store and they said they hadn't seen that before. It did it while I was there. They restored the phone and it didn't make any difference.
I have turned the calendar off in settings - mail - icloud - deleted and then turned back on again. It didn't help.
I put the Google Calendar app on in the hopes I would have a calendar that wouldn't frustrate me and it is so slow in responding, I have deleted it.
I see online that many others are having the same problem with their iCal.
It would be great to know the solution.
Please help

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Jumping back and forth, LR and CS3

I do most of my work in LR 2.5 but always go to CS3 to finish things up. At times I would like to take the incomplete image back to LR for some additional work and then again return to CS3. How do I go from CS3 to LR and then back again?

Save the image back from Photoshop CS3, apply additional edits to the saved file in Lightroom then choose Edit in Photoshop CS3 again. You will be presented with the dialog shown below. You want to choose Edit a Copy with Lightroom Adjustments.

Curson jumping and browser pages jumping back and forth

We've installed XP home edition and:
in all browser windows and some applications like iBank and Quicken when clicking an option the command executes and then I hear another click and the original window returns.
Other apps work fine for a while and then do the same thing.
We've checked normal mouse settings and cant resolve the problem.

We've installed XP home edition and:
in all browser windows and some applications like iBank and Quicken when clicking an option the command executes and then I hear another click and the original window returns.
Other apps work fine for a while and then do the same thing.
We've checked normal mouse settings and cant resolve the problem.

Mouse moves screen image back and forth (baby changed some setting)

My son was banging on the keyboard and must have hit a combination of keys that changed something. Now the desktop image moves around in the display as I move the mouse (makes me a bit dizzy). Any idea what this setting is and how I can restore it to the old setting?
Thanks in advance.

Hello and Welcome to Apple Discussions.
As well as the ctrl key and mouse scroll as jlindh suggests, you can toggle OS X's zoom in  menu > System Preferences... > Universal Access > Seeing and turn Zoom off.
cheers
mrtotes

One website is redirected to another url and they keep switching back and forth

When I try to open a particular site (nwherald.com), Firefox automatically switches between that url and m.nwherald.com. When loading, the two jump back and forth. This doesn't happen with any other url, and I can open nwherald.com just fine in IE. What gives. It's not much of a newspaper, but it's all we have.

Did this problem occur recently with Firefox? The link runs fine for me; do you have any Firewall rules or antivirus settings that may block links?
It is strange that it is trying to force you to a mobile site, and then back to a desktop version. Would you happen to have Flash disabled? I am wondering if the site is detecting a missing plugin and trying to bring you to a more compatible version.
When you go to the site, you can check if the Web Console shows any errors:
* Tools (or [[Image: New Fx Menu]] > Developer/Web Developer > Web Console
If it is redirecting too quickly, you can temporarily disable redirects:
* Tools (or [[Image: New Fx Menu]]) > Options > Advanced > General
* Check "Warn me when sites try to reload or redirect the page"
Also I doubt this is related to your problem, but I notice you have two versions of Adobe PDF Plug-ins:
* Adobe PDF Plug-In For Firefox and Netscape 11.0.9
* Adobe PDF Plug-In For Firefox and Netscape 11.0.8
Having multiple versions of the same plugin can cause problems as well.

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Jumping back and forth, probably because some keyboard shortcut.

Similar Messages

Maybe you are looking for