Jumping from BW 0PS_C04 to SAP R/3 PS
Hi Folks,
We are seeking help to resolve a Report to Report Interface problem. Users are able to jump to R/3 CO/CCA, but not to R/3 PS. The following behaviour is observed when a query created against 0PS_C04 attempts a jump or Goto - CJ74. First warning message states that 0DOC_DATE cannot be uniquely assigned. Second warning message states that 0PSTNG_DATE cannot be uniquely assigned. The third and final message states that 'You cannot use the report-report interface to call up report RKPEP000.
Please, advise of potential fix or resolution.
Thanks and regards,
Cassio Bastos
Hi!
Did you find solution? I have the same problemm just other report and fields
4nx in advance
Similar Messages
-
Jump from Webreport to Transaction SAP GUI Windows RSBBS
Hi BWers,
i want to jump from a Webreport with paramters to a SAP R3 transaction in SAP GUI for WINDOWS - i already realized it from BexAnalyzer to a local TA (se16) with a table Name as paramter.
How can i do this from a Webreport? I don´t NOT want to use SAP Gui for HTML!
Thanks
DominikHi Dominik Lanzenberger,
Please check here..
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/99/08629bd3e41d418530c6849df303c9/content.htm
Thanks,
Vijay. -
RSBBS: Jump From BW Query to SAP Query
Hi
I have a cost center analysis report in BW which has an option to jump to R/3. When I type the transaction RSBBS and give the name of the query, the Receiver application is 'QU' (Sap Query) and the receiver object is 'GZ_BW_INTGRTYZISQ_CCA_Q01' which I am presuming is the query to which the Cost Center analysis report in BW is jumping to.
How do I view this SAP query and if necessary change it. I have tried tcodes SQ01, SQ02, SQ03 and none of these recognise the above mentioned receiver object
Kindly advise.
Regards
Sheilythe best way to figure out is to ask ur functional guy the Tcode to get there. it could be anything.
-
Warning message on jump from a BI report
On jump from a BI report to another (from any characteristic or key figure), following warning message comes up in the second report "Source selection for 0FISCPER incompatible for target selection". This is user specific, not all users are getting this message. It is not an authorization issue. Please provide your thoughafter and soughtafter suggestions.
Edited by: Suprabhat99 on May 18, 2011 3:23 PMHi Suprabhat,
Please check if all the Query restrictions like variables,selection options,interval,hierarchy etc is same for Source and Target Query for that paticular char - 0FISCPER.
Then Incase there is no discrepancy in above types then please check SAP note 1265027:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323635303237%7d
Also below forum should help resolve your issue :
Re: Jump Query
Regards,
Akanksha -
Jump from (RRI) BEx query parsing infoobject without MD to source system
Hi!
I have a snag that I hope someone out there will be able to help me with. I have a query that cointains purchasing line items. I want to jump from a purchasing order number in the query to transaction me23n (display purchasing order) in the source system.
This works fine in the portal (don't ask me why there's a difference..) where ECC is launched as a new portal window and the data is parsed correctly. But when attemting to do the same in BEx Analyser the system pops a dialog demaning that I choose which infosource should be used for reversing the infoobject into the proper ECC table field...
Now the infoobject is 0REF_DOC_NR, and it doesn't have any masterdata or texts.. so there is no "papertrail" for the system to follow back to the source.
In RSBBS the I have selected delete for all other infoobjects and set the line for 0_ref_doc_nr like this:
InfoObject: Reference Document Number, Type: Table Field, Field Name: EBELN, Selection Type: Parameter, Required Entry: X, Data Element: EBELN, Domain: Blank, SET/GET Parameter: BES
Any tips?
Regards
OlaHi,
i have replied wrong,
i mean that
when i am trying this,
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID (for drill down on particular field, i.e. open the URL with this field value entred from sender query's field shopping cart number)
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'&GS_HEADER-OBJECT_ID=10000456
and when try this:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID=10000456
but not skiping the initial screen.
Thanks. -
RRI Jumps from Different Characteristics Produce Different Results
Hi experts,
I am having the problem that when I jump from different characteristics in the same row in sender query, I got different result sets. E.g. when I choose "Go to" from the "Name" char I got one record, but from "Transaction Description" char multiple records.
Could anyone please clarify this problem?
Thanks,
JoonHi,
check the info object mapping in RSBBS. some time same kind of charactorstics is available in the destination report it show such kind of error.
Eg. 0customer to 0ship_to_party , or sold to party ect.
Just go to RSBBS
select the type as infoobject ...
Field name = target field
for more clarification please refer below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?QuickLink=index&overridelayout=true
regards
bvr -
Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.
Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
PriyaHi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon -
SSO from Microsoft ISA to SAP enterprise Portal
Hi Gurus,
Our vendors access the Internal network using MS-ISA as proxy.The first point of authentication is MS-ISA where the Vendor needs to give his User id and Password.After that he hits the Internal Portal and is prompted for a Login again.Is there a way to set up SSO from MS-ISA to SAP EP7.0 so that there is no need for second Logon.
Thanks in Advance!The easiest, and common way to solve this, l but not the only way is to use ISA as a proxy and use the fact that the ID of the authenticated user can be stored in an http header variable (e.g. REMOTE_USER). This HTTP header variable can then be used by the back-end SAP system (internal portal) to authenticate the user and issue an SSO2 ticket so that the authentication only needs to occur first time they access a page on the SAP system.
The use of HTTP Header variables in SAP J2ee engine is widely documented on SDN and in SAP help library.
Thanks,
Tim -
Copy file from FTP server to sap application server
Hi,
I am able to copy a particular file from FTP server to sap application server using FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT. But here my problem is, it copies into default application server path(DIR_HIOME). I want to copy into specified folder in the application server. How can I specify the required destination path.
Can you please suggest how to achieve this.
Thanks,
Shiva Kankanalatry something like this:
data: user(30) type c value 'ftpuser', "ftp username
pwd(30) type c value 'ftppass', "ftp password
host(64) type c value '255.255.255.255', "ftp server IP
cmd1(80) type c value 'lcd /dump', "location on app server where you want to copy the file
cmd2(80) type c value 'get', "specifies you are going to get the file from ftp server
dest like rfcdes-rfcdest value 'SAPFTPA',
file(15) type c value 'file.txt'. "specifies file that you want to get from ftp server
data: hdl type i,
key type i value 26101957,
slen type i.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
EXPORTING
source = pwd
sourcelen = slen
key = key
IMPORTING
destination = pwd.
call function 'FTP_CONNECT'
EXPORTING
user = user
password = pwd
host = host
rfc_destination = dest
IMPORTING
handle = hdl.
call function 'FTP_COMMAND'
EXPORTING
handle = hdl
command = cmd1
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
loop at result.
write at / result-line.
endloop.
CONCATENATE cmd2 file INTO cmd2 SEPARATED BY SPACE.
call function 'FTP_COMMAND'
EXPORTING
handle = hdl
command = cmd2
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
loop at result.
write at / result-line.
endloop.
refresh result. -
unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest
Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh -
I'm scared. Can you help? I can't jump from here to there.
Dear Apple MobileMe
I am very eager to make the move from MobileMe to iCloud, but...
As you can see from your own email, this is far from simple
My wife and I totally depend on my Macbook Pro (1), my old Powerbook that my wife uses (2), our iPhones (3 & 4), our iPad (5), my Time Machine, and my MobileMe (6), including Backups to our iDisk on MobileMe to keep our lives running.
iCal's synced across 6 Apple platforms
Address Books synced across 6 Apple platforms
Email synced across 6 Apple platforms (me using Mail and wife using AOL)
Bookmarks synced across 6 Apple platforms
Various apple ID's synced across 6 Apple platforms
You get the picture
I would hate to mess this delicately balanced Apple computer ecosystem up at all.
iOS 10.7 requires that I upgrade a bunch of my key work apps and figure out a way to transfer a 10 year dependence on Quicken onto some other equally robust financial management platform that doesn't seem to exist. Just to add insult to potential injury.
I'm scared.
Wish this whole process could be 500% more automated.
We've been on Macs and other Apple devices since 1987. I can't keep track of all of my "Apple ID's" for this and that that you've asked me to set up for each device and for each service over the years. Everything's registered with you.
Devices
MobileMe email aliases
iTunes
iDisk
App Store
AppleCare(s)
MobileMe
Apple.com support (here)
Apple ProCare
Apple iDisk Public folder
etc.
etc.
You should be able to gather all of my identities together into one place and figure out the best way to migrate me to the new Apple iCloud Garden of Eden.
You've got to find a way to help us work all this out. It's more than intimidating. We're frozen in fear. We just can't jump from here to there.
Steve
==================================================
On Dec 1, 2011, at 1:57 PM, MobileMe wrote:
iCloud is here Dear MobileMe member,
iCloud is here and you can now make the transition from MobileMe. You can move your
MobileMe mail, contacts, calendars, and bookmarks to iCloud, and keep your me.com and
mac.com email addresses. iCloud is a breakthrough set of free cloud services, including iTunes in the Cloud, Photo Stream
and Documents in the Cloud, that works seamlessly with your iPhone, iPad, iPod touch, Mac or
PC to store your content in iCloud and push it to all your devices. When content changes on one
device, all your other devices are updated automatically and wirelessly.
Making the Move
Before moving to iCloud, make sure that your iOS devices and computers have the required
software and your data is properly backed up by following these steps:
Get iTunes 10.5.
Download iTunes 10.5 to your Mac or PC.
Update your devices to iOS 5.
Update your iPhone, iPad and iPod touch to iOS 5 by connecting each
device to your Mac or PC and following the instructions in iTunes.
When you are asked to provide your Apple ID during iOS setup, use
your MobileMe email address and password.
Update your computers.Mac: Update to OS X Lion v10.7.2PC: Update to Windows 7 or Windows Vista Service Pack 2 andinstall the iCloud Control Panel for Windows.
Back up your MobileMe data.
For detailed instructions, review this article.
Verify your contacts and bookmarks.
Verify that your contacts and bookmarks are completely up to date on
at least one device you will use with iCloud. They will be uploaded to
iCloud from your devices after you move. iCloud will not copy any
contacts or bookmarks directly from me.com.
When you are ready, go to me.com/move and follow the instructions to move your account to
iCloud.
Important Notes
If your me.com or mac.com email address is used with more than one Apple ID, you may be
unable to access some iCloud services. If this occurs, you can remove duplicate email
addresses from your other Apple IDs by visiting My Apple ID. You can also use different Apple IDs for iCloud and your Store purchases (including iTunes,
App Store and iBookstore). For more information and detailed instructions, review this article. You can make the move from MobileMe to iCloud anytime between now and June 30, 2012. For
answers to some of the most common questions about the transition, see the MobileMe
transition FAQ. Sincerely,
Apple
iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer
with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is
required for accessing email, contacts and calendars). Some features require a Wi-Fi connection. Some features
are not available in all countries. Access to some services is limited to 10 devices. Previous purchases may be
unavailable if they are no longer in the iTunes Store, App Store, or iBookstore.
MobileMe is a service provided by Apple • Terms of Service • Privacy Policy
Copyright © 2011 Apple Inc. • 1 Infinite Loop, Cupertino, CA 95014
You are receiving this email from Apple to notify you of service information regarding your MobileMe account.This is a user-to-user forum: you aren't talking to Apple here.
I do sympathize with your situation: you are among many for whom upgrading is impracticable, but who are dependent on MobileMe facilities which will be withdrawn next June.
As you say, you will need 10.7.2 to access iCloud on a Mac, and iOS5 for mobile devices.
I can't offer you any easy solutions, but this list may at least clarify the exact situation for you:
Your email, calendars, contacts and bookmarks, and 'Find my iPhone' will be migrated to iCloud.
Your iDisk, together with website hosting and Gallery. will continue to work as before until next June.
You will be able to access email, calendar and contacts on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is). -
Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use
try restart
http://support.apple.com/kb/HT1430 -
Fetching of multiple files from Application Server into SAP Program
Hi All,
I have a issue related <b>Fetching of multiple files from Application Server into SAP Program</b>.
Actual issue is as below.
In the <b>selection screen</b> of <b>my program</b> i will give <b>Application Server Path</b> as :
<b>/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*</b>
Then the based on above input it should pick up all the files that are matching <b>eppi0720*</b> criteria.
Suppose if i am having <b>5</b> files with above scenario, i have to fetch all those <b>5</b> files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
name_of_file(260) type c,
name_of_path(1285) type c.
data: begin of file_list occurs 100,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file_list.
data: begin of file,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file.
call 'C_DIR_READ_FINISH' " just to be sure
id 'ERRNO' field file_list-errno
id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
id 'FILE' field p_file
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
sy-subrc = 4.
exit.
endif.
* Read the file list and add to internal table.
do.
clear file.
call 'C_DIR_READ_NEXT'
id 'TYPE' field file-type
id 'NAME' field file-name
id 'LEN' field file-len
id 'OWNER' field file-owner
id 'MTIME' field file-mtime
id 'MODE' field file-mode
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc = 1.
exit.
endif.
append file to file_list.
enddo.
* Write out the file list
loop at file_list.
write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman -
Jump from alv report to qa03 screen based on PRUEFLOS field
Hi experts,
I developed one alv report ,in that one field name is PRUEFLOS (inspection lot number).I want to jump from alv report
to QA03 screen based on PRUEFLOS field.I wrote in this way but i didn't get.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SELFIELD-FIELDNAME.
WHEN 'PRUEFLOS'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
CALL TRANSACTION 'QA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
what is the problem ?pls help me in this.Hi Ram,
Recheck:
1) You have passed 'FORM USER_COMMAND' in 'I_CALLBACK_USER_COMMAND' while calling f.m. for ALV displa, and
2) You have checked the value of user command, i.e.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SY-UCOMM.
WHEN '&IC1'.
CASE SELFIELD-FIELDNAME.
WHEN 'PRUEFLOS'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
CALL TRANSACTION 'QA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDCASE.
ENDFORM.
Regards,
Birendra -
Jump from alv report to cor2 screen
Hi experts,
I develop one alv report ..i want to jump from alv report to COR2 screen when click on order number(field name is AUFNR).
i wrote code in this way.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD
CASE SELFIELD-FIELDNAME.
WHEN 'AUFNR'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'AUF' FIELD T_FINAL-AUFNR.
CALL TRANSACTION 'COR2' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
but it is not working properly,when u click on any order number it is going only the same order number(in cor2 screen).
what is the problem? set par id (AUF) EXIST IN TPARA table compulsalory or it is created automatically?
pls help me in this . If possible pls send the code.Hi,
I have already mentioned both ways, but ok, once again.
A. how I found parameter ID ANR:
1.) run transaction COR2
2.) set cursor to field "Process order"
3.) press F1 button
4.) performance assistant displays
5.) press "Technical Information"
6.) technical information displays
7.) in field "Parameter ID" you can see parameter ID assigned to a screen field
B. how I found parameter ID BR1:
1.) switch on debugger
2.) run transaction COR2
3.) put a breakpoint on "GET PARAMETER" statement
4.) debugger stops on every GET PARAMETER statement in PBO of COR2
5.) there you can see that BR1 is used for field AUFNR
Basically first mentioned way is sufficient, because system gets parameter value from parameter ID assigned to a screen element automatically. But in this case a value is overwritten by coding in PBO of COR2.
Hope it helps.
Regrds,
Adrian
Maybe you are looking for
-
Problem submitting jobs in OEM
Hi, I've been trying to utilize backup manager inside the OEM, and finally, I am able to log into OEM, my preferred credentials are set properly to user oracle, my user has been given the logon as batch job privilage. I've also given my user Full Con
-
Music player wont open after update
Hi, Recently i have updated music player for my nokia 5800. But after update i cant open music player and not even able to open songs folder from gallery. Could anyone help on this.
-
Chart causing error 1009 when enabling compatibility mode in Flash Builder 4
Hello. I'm trying to use the chart components in Flash Builder 4. I'm using Flex SDK 4, but had to turn on the "Flex 3 compatibility mode" for some off-topic reasons. I simply created a new application and copied the code from the DateTimeAxis class
-
HelloWorldSwing tutorial -- still in need of repair?
hello, as a new SDN member, i may be posting this in the wrong place -- if so, please let me know where to re-post, and i'll do so. yesterday, 3/22/2009, i was following the Swing tutorial at http://java.sun.com/docs/books/tutorial/uiswing/start/comp
-
Adding Material Type as a characteristic in COPA
Hi, I would like to add Material type (like FERT, HALB and so on) as a characteristic in COPA. Is there a standard characteristic of this kind delivered by SAP?? If I have to create it myself - which table and field is it? Where would the system take