Jumpy playback when exporting mixture of video and stills

I have 2 still frames (jpgs) nestled between video clips on my time line to create a crude animation. When I watch the sequence playback on the FCP canvas, everything looks nice and smooth, but when I export a .mov or .flv, the playback skips over these still frames and just jumps to a slightly earlier spot in the video footage and continues playback. Even if I go frame by frame, the stills are no where to be found in the exported .mov. What gives?

put your playhead over the clip you want to freeze in the timeline and then hit Shift+N this will send a extendable freeze frame of your clip in the viewer. You can drop that clip from the viewer back in your timeline.

Similar Messages

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

Lightroom 5.4 reaches 10% and crashes when exporting a slideshow video.

Lightroom 5.4 reaches 10% and crashes when exporting a slideshow video every time. I have Abobe Premiere elements 10, which works fine for creating a slideshow. Could there be a conflict? Any suggestions most welcome as this problem is driving me bom-boms.
Regards Dave

Thanks so much ... just tried it and it worked perfectly. I just used a small external drive to transfer them, and ticked the option to 'copy and import photos to new location', so not only the catalogue, but also the photos themselves are on my iMac. Very simple. Thanks.

FCP Freezes When Exporting to Flash Video (FLV)

Final Cut Pro 7.0.2 freezes when exporting to Flash Video (FLV). The resulting FLV file contains only a few seconds of the exported video. A 2009 Apple Support notice offers this re. FCP 6 and CS3 Flash Video Encoder...
===
Final Cut Pro: May quit unexpectedly when exporting to Flash
Last Modified: February 13, 2009
Article: TS2593
Symptoms
Final Cut Pro may quit unexpectedly when you export using QuickTime Conversion if you choose Flash Video (FLV) from the Format menu.
Products Affected
Final Cut Pro 6.x, Adobe Creative Suite 3 Flash Video Encoder
Resolution
This can happen if you use the Adobe Creative Suite 3 Flash Video Encoder and Final Cut Pro together. This issue does not occur with the Flash Video Encoder in Adobe Creative Suite 4. To work around the issue:
Choose File > Export > QuickTime Movie.
Be sure to enable Make Movie Self-Contained.
Open the exported movie in QuickTime Player.
Export the movie to Flash from QuickTime Player.
===
I just installed CS5, so I would think I shouldn't be bothered with an older, problematic Flash Video Encoder. I don't think I should have to convert an MOV file to an FLV file using QuickTime Reader or anything else. Why doesn't it export correctly out of FCPro 7.0.2?

oh well.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

HT1338 PLEASE HELP ME I AM FACING A PROBLEM My name is Ameer. I watch youtube videos from ipad2 ( safari ) today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is

PLEASE HELP ME I AM FACING A PROBLEM
My name is Ameer.
I watch youtube videos from ipad2 ( safari )
today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is located on a bar under the video which appears when i touch the screen. Today every time i touch the screen nothing happens and i cannt pause the video nor adjusting its quality.
So plese help me fixing this problem as soon as posible.
Regards

Same problem on my ipad mini, running ios 6.0.2.
A bit more info:
-tried using YouTube in Safari on another ipad. Worked fine.
Tried reboot (sleep + home buttons for 15 seconds). Didn't fix.
-tried logging out of my YouTube account, thinking the problem was tied to my settings. Didn't fix.
-tried uninstalling all apps I downloaded since the last time YouTube worked properly. Didn't fix.
-tried watching a video in desktop mode. Can tap video screen to bring up pause okay in that mode.
There are work arounds, but the thing I want to know is why YouTube doesn't work in Safari as of a couple of days ago, and is it indicative of another more serious problem with my ipad.

'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

One of the following steps should help.
Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Web Content: > "Enable Plug-ins".
       or
    Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box beside
   "You are currently in the HTML5 trial".
4. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes beside all items.
    Check the box beside "Remove all website data".
    Click "Reset".
5. Turn off Extensions, if any.
    Safari > Preferences > Extensions
     Now try YouTube.
Best.

When i'm editing my video in the timeline it looks perfect, but when i save the video and replay it on quicktime it has these weird lines? does anyone know how to fix that?

when i'm editing my video in the timeline it looks perfect, but when i save the video and replay it on quicktime it has these weird lines? does anyone know how to fix that?

As Tom states, that's interlacing.
Interlacing was invented when the TV was born, to carry 1/5 the frame with each Hz of the electricity rating. In the US, that's why you use 30 fps (or 29.nnn) in the US and we use 25 fps in europe as the electricity is 60Hz/50Hz.
Interlaced video should ONLY (I repeat ONLY) be used for analog TV signal transports.
Each and every digital TV set today, including all the computer screens, is Progressive, updating the full frame at each screen refresh. And most TV's even refresh much quicker, newest TV's refresh a 800Hz..! (giving then problems with the newest LTE spectums..)
If your source media in interlaced, ask why! And stop shooting interlaced.. ;-)
If you have interlaced video, make sure you apply the DeInterlace setting when you import and transcode it.

TS1702 my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?

my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?
<E-mail Edited by Host>

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

My iPhone 4S has no sound when I play music, videos and movies

My iPhone 4S has no sound when I play music, videos and movies

Is the slider all the way to the right??
And no, if your phone is vibrating when you get texts/calls then you're not in Do Not Disturb. You would see a Crescent Moon symbol to the left of Battery % if it was on.

My Macbook Pro was frozen when I was watching video and reading document. I just purchased this laptop last month. why does it happen?

My Macbook Pro was frozen when I was watching video and reading document. I just purchased this laptop last month. why does it happen?

If your temps are back to normal then the only thing that I would do is to completely uninstall the Avast software. See Thomas Reed's excellent Mac Malware Guide and pay particular attention to the "Do I need a/v software" section. 99% of the time, you don't and Mr. Reed only suggests the use of two av apps.
Clinton

How do i delete imovie videos and still have them on my time capsule

how can i delete imovie videos and still have them on my timecapsule

You can copy them to the TC.. do not expect Time Machine to keep something that you delete though..
And please recognise you are breaking the idea of Time Capsule.. it is primarily a backup target for TIme Machine.. once you move files to the TC and delete them on the computer.. the only copy of the file is now on the TC.. which has no automated backup.. no easy means of recovery if the drive fails. no parts even.. Apple do not fix.. they give you a replacement and chuck your old one.
You are hoping that the TC will preserve your files.. when it is well known to be a less than reliable device.
Think hard if this is really where you want to go.

Dragging video and still files into a atom strand template

How do I drag video and still files into an atom strand theme template in Motion 4? I am trying to do it but the opened file keeps snapping back to the file list.

The templates can be challenging to modify.
In that template, it's not the camera that's being animated, it's the group containing the camera. If you select that group, and set the Keyframe Editor to view animated keyframes, you'll see them.
To modify them, it may be easier to show them in the Timeline so that the keyframes at each frame are bundled into one object and therefore easier to move. But if you are new to Motion, you are diving into the deep end of the pool here.

Having read how one might be able to send a video that is too large, it seems that those videos and still pictures that are sent, well at least for me anyway, end up 90 degrees to the horizontal...how do i send a pic, or video that is the right way up???.

my question relates to the orientation of the videos, and still pictures that are sent via the ipad2...they always seem to be 90 degrees to the horizontal...can anyone suggest how to send them so that they will be the right way up???

my question relates to the orientation of the videos, and still pictures that are sent via the ipad2...they always seem to be 90 degrees to the horizontal...can anyone suggest how to send them so that they will be the right way up???

Jumpy playback when exporting mixture of video and stills

Similar Messages

Maybe you are looking for