Jumpy streaming once paused for more than 10 secs...

Hello everyone,
I have a player set up to stream live tv channels. It works fine except when paused for more than 10 secs or so, it continues to stream but very jumpy, as if we press on advance/rewind button.
If you have any idea or have encountered the same problem, please share.
Your input is very appreciated.
Regards,
Niusaul

Hello,
I am using FMS...
I was able to fix it the problem.
Thx ;-)

Similar Messages

  • [BUG] Volume incrase after pause for more than 20 sec.

    I've observed annoying volume behavior on my Spotify (Windows 8.1, 64-bit).Steps: 1. Listening good music :)2. Pause the music3. Waiting for 20 sec. (or more) doing nothing (even mouse cursor move)4. Play the music again5. Volume goes up to annoying level To come back to right volume level I have to change system volume level (I hear sudden volume level decrease)

    I disabled "Enable Hardware Acceleration" (was enabled) and enabled "Set same volume level for all tracks" (was enabled) and nothing happend. The problem still exists.

  • HT201365 Since uploading 7.0 I cant play any game for more than 5 sec.without screen flipping to Apps. page. Anyone else have this problem??

    Since uploading to 7.0.2 cant play any game for more than 5 sec. without screen flipping to Apps. page. What to do??

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • My Iphone rings but screen is blank held the power button for more than 10 sec but in vain

    My Iphone rings but screen is blank held the power button for more than 10 sec but in vain

    Hello waseem.abdul_hadi,
    It may be that your Screen Curtain has been activated. This can be deactivated by triple-tapping the screen with three fingers.
    Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
    iPhone User Guide - Use iPhone with VoiceOver
    http://help.apple.com/iphone/7/
    Cheers,
    Allen

  • MulticastSocket.send blocks for more than 28 secs on solaris

    Hi,
    I am sorry if this question has been raised earlier, but I could not find any convencing answer till now.
    I have a program that tries to send UDP packets (Multicast) as fast as possible. But on my solaris system the "send" function somtimes blocks for nearly 28-30 secs. This never happens on my linux system, (the send usually takes 1 or 2 msec on linux system).
    I have the following configuration:
    Solaris:
    $ uname -a
    SunOS solaris 5.8 Generic_117350-30 sun4u sparc SUNW,Sun-Fire-V210 Solaris
    $ java -version
    java version "1.5.0_05"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_05-b05)
    Java HotSpot(TM) Server VM (build 1.5.0_05-b05, mixed mode)
    Linux:
    $ uname -a
    Linux linux 2.6.9-22.0.1.EL #1 Thu Oct 27 12:26:11 CDT 2005 i686 i686 i386 GNU/Linux
    $ java -version
    java version "1.5.0_05"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_05-b05)
    Java HotSpot(TM) Client VM (build 1.5.0_05-b05, mixed mode, sharing)
    The datagram packet size is 1442 bytes.
    Is this a normal behaviour or am I doing something wrong ? Is there any workarround to avoid these blocks ?
    Thanks for your help,
    bhatiya.

    Update to 1.5.0_06 and see if it has been fixed, it's a known bug iirc.

  • HT4623 I need your help to get rid of my photo stream pics as its stocked in my iphone even I make photo stream option off for more than a month!!

    I was shared my photos with my other iphones and Ipad, now I need it to be privacy so I tried to switch it off and delete it but there are no way to delete these stream pics!!
    I tried from Icloud as well and nothing these to help
    COuld you let me know what is the best fast way to cancel these stream Pics from my Iphone and will be appreicating that.
    and I have iphone 5 after making the update to 6.1 version its keep giving me No service and I tried to switch off and on it works then again coming same problem!!
    regards
    Qasem

    Please disregard this question. I'll submit a shorter and more direct question. Thanks.

  • FLV file won't play vid and audio for more than 3 secs

    I tried to convert this FLV file to MOV using ffmpeg, and here the error i get
    /usr/bin/ffmpeg -i internetmarketing.co.at/be87.flv internetmarketing.co.at/be87.mov
    FFmpeg version SVN-rUNKNOWN, Copyright (c) 2000-2007 Fabrice Bellard, et al.
    configuration: --prefix=/usr --libdir=${prefix}/lib --shlibdir=${prefix}/lib --incdir=${prefix}/include/ffmpeg --enable-shared --enable-libmp3lame --enable-gpl --enable-libfaad --mandir=${prefix}/share/man --enable-libvorbis --enable-pthreads --enable-libfaac --enable-xvid --enable-libdts --enable-amr_nb --enable-amr_wb --enable-pp --enable-libogg --enable-libgsm --enable-x264 --enable-liba52 --enable-libtheora --extra-cflags=-Wall -g -fPIC -DPIC --cc=ccache cc --enable-swscaler
    libavutil version: 49.4.0
    libavcodec version: 51.40.2
    libavformat version: 51.11.0
    built on Feb 4 2008 14:49:27, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
    [flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
    [flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
    Seems stream 0 codec frame rate differs from container frame rate: 1000.00 (1000/1) -> 55.92 (671/12)
    Input #0, flv, from 'internetmarketing.co.at/be87.flv':
    Duration: 01:45:56.4, start: 0.000000, bitrate: N/A
    Stream #0.0: Video: flashsv, bgr24, 640x480, 55.92 fps(r)
    Stream #0.1: Audio: 0x0006, 22050 Hz, mono
    File 'internetmarketing.co.at/be87.mov' already exists. Overwrite ? [y/N] y
    Output #0, mov, to 'internetmarketing.co.at/be87.mov':
    Stream #0.0: Video: mpeg4, yuv420p, 640x480, q=2-31, 200 kb/s, 55.92 fps(c)
    Stream #0.1: Audio: aac, 22050 Hz, mono, 64 kb/s
    Stream mapping:
    Stream #0.0 -> #0.0
    Stream #0.1 -> #0.1
    Unsupported codec (id=0) for input stream #0.1
    [ps23240]$
    that's the error i get, and supposedly ffmpeg should be able to handle this conversion
    http://ubuntuforums.org/archive/index.php/t-431941.html
    ...so i have QT Pro, and it plays the vid and audio for 3 secs and then only plays video. I'd like to be able to use the vid and import it into iMovie. That's what I'm going for...
    ...suggestions

    It seems that I can't login to the developer forums. I'm in the university program and when I try to login to apples developer forums I'll always be redirected to the login screen.

  • HT1688 My phone is glitching all the time and won't stay on for more than 30 sec...

    Until a few days ago my phone was fine but then the screen turned kind of denim looking almost and slowly faded black and I would restart it but it continued to go through this proccess

    Could be faulty battery. Apple Store can perform free quick (minutes) battery diagnostic testing. Make Genius reservation to avoid long wait.

  • Detect when a button is pressed for more than a certain period of time

    How do I detect if a button is pressed for more than a certain amount of time? E.g. if you press on the delete button on the dialer and hold it there, it continues to delete. Or if you hold down the .com button for more than a sec, it changes to .net and so forth.
    Thanks

    Start a timer when the button is pressed. Reset the timer when the button is released. If the timer expires before being reset then you know the button has been held down at least as long as the timer was set for.

  • Setting Equalizer for more than one song at a time

    Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
    Thanks,
    Joe The Author

    highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

  • How do you get a song to play for more than one slide???

    I'm new to mac and I am trying to create a birthday video but the audio will not continue for more than 1 slide. I can do it in powerpoint but I want to burn the presentation onto DVD. Thanks for your help!

    I just created a slideshow using Keynote and I just moved the song from iTunes into the inspector --> document --> audio. There is a small box that you just put the song into and it automatically plays, either once or looped.

  • Cannot Get Mail for more than 5 accounts at a time

    I have a total of 9 POP email accounts setup in Mail. The problem is that my dedicated server doesn't allow for more than 5 simultaneous send/receives per IP (which unfortunately cannot be changed). When I click on "Get Mail", I see it tries to get mail for all accounts at once, and I need to somehow change that within Mail. Ideally I need it to check accounts individually or, as you can do in Entourage, group it into send/receive schedules with 4 per group.
    I am desperate, someone please help!

    If App Store has an app that can make, e.g., zip archives of multiple photos, then it could help (you package a bunch of photos in a zip file, and then you send only one attachment; the zip file).
    Disclaimer: I don't know the App Store apps nor the iPhone SDK well enough to know if such an app exists or if it is even possible.

  • Error message that no virtual memory pops up & crashes when application is run for more than 1 hour

    My application uses VISA serial operations. It has arrays to store data collected from various devices. I reinitialise the arrays each time the index reaches 50.
    Data acquisitions is carried out in separate threads by invoking the runVI method.
    When i run the application on Win XP continuaously for more than 1 hour it gives an error message that no more virtual memory to complete the task and the system hangs up.
    I open the serial port only once and close it when the application is terminated. But serial read/write operations are done continuaously
    Is the error caused due to memory leakage? How can i solve the problem. It's very urgent and i shall be thankful if i ge
    t the help.

    Yes, it sounds like a memory leakage (either that or you're trying to run an advanced app on an old computer w/ little memory and a small hard drive).
    Things to try:
    1. Ensure it's only labview, and not say labview and another application interacting. This isn't a likely case, but you never know what people have on their boxes and I've seen some weird things with virus scanners. Hit Ctrl-Shift-Esc to get the task manager. Go to processes and watch the memory consumption (click Memory twice to sort in descending order) of the various processes. If labview keeps rising, you've got a leak.
    2. If only a reasonable amount of memory is being used, double check your page file settings (read virtual memory).
    From the Control Panel
    Select System
    Select
    Advanced Tab
    Under Performance, select the Settings button
    Select Advanced Tab
    Under Virtual Memory, let windows dynamically adjust the page file (and any XP speed tweakers out there can now chime in about how wrong this is. This essentially allows windows to keep upping the virtual memory as needed by various processes.
    3. Find the leak. In LV Tools->Advanced->Profile VIs. Turn on memory stats. Start the profiler. Start your vi. If the vi crashes labview totally, you'll have to keep hitting snapshot to find the leaky vi (the one that's memory keeps growing).
    4. Upload the vi to the forum so we can give it a looksee.
    G'luck
    2006 Ultimate LabVIEW G-eek.

  • I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

    I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

    Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

  • OATS Load test is not able to scale for more than 10 users

    Hi,
    I am using OATS load test runner for performance testing Fusion based application on webcenter portal.I am not able to run OATS load tester sucessfully for more than 10 VU's.After that it gives a component not found issue or loop error.Please let me know if anybody faced similar issue and was able to resolve it.Is there some setting to be done?
    Thanks,
    Ritesh
    Edited by: user766882 on Aug 20, 2012 9:07 AM

    Hi Jean,
    Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
    Thanks,
    Ritesh
    Edited by: user766882 on Aug 21, 2012 8:25 AM
    Edited by: user766882 on Aug 21, 2012 8:33 AM

Maybe you are looking for