Juniper Network Connect 7.4 fails to install on 10049

When I try to install the Juniper Network 7.4 it fails on 10049 (worked on older builds) with nc.windows.setup.24324

Hi,
Besides that, please also refer to this similar thread:
https://social.technet.microsoft.com/Forums/en-US/744a4f5d-8f6d-4c83-aca9-c6e71fc56cf0/windows-10-build-10041-diver-instalation-fail-network-connect-juniper?forum=WinPreview2014Setup
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Mac OSX 10.7.5 + Java 7.11 Juniper Network Connect fails

    I am running Mac OSX 10.7.5 and just upgraded to Java 7.11. As a result, my Juniper Network Connect vpn now fails - I can't even install the software. I see the following error message "An error occurred while extracting one of the Network Connect components." I made sure the keystore password was set to changeit using the following:
    sudo keytool -storepasswd -new changeit -keystore /System/Library/Frameworks/JavaVM.framework/Resources/Deploy.bundle/Contents/Home/lib/security/cacerts -storepass changeme
    However, I continue to see "An error occurred while extracting one of the Network Connect components."
    Any ideas?

    retrana wrote:
    I made sure the keystore password was set to changeit using the following:
    sudo keytool -storepasswd -new changeit -keystore /System/Library/Frameworks/JavaVM.framework/Resources/Deploy.bundle/Contents/Home/lib/security/cacerts -storepass changeme
    However, I continue to see "An error occurred while extracting one of the Network Connect components."
    Just a guess, but that looks to be the location for Apple Java 6, which is not replaced when you upgraded to Java 7, rather Oracle stores it in a different location.
    It's also possible that Juniper has not updated their software for Java 7.  I know that's true for at least one other VPN vendor.

  • Juniper Network Connect fails in Mac OS 10.10

    Hello,
    I am trying to use Juniper Network Connect on my MacBook Pro running OS 10.10 and Java 8 (Update 25) to connect to my corporate network.
    However, each time I log into my corporate network through Mozilla Firefox and attempt to establish a remote desktop connection the following message appears as Network Connect attempts to load, "An error occurred while extracting one of the Network Connect components."
    Mozilla Firefox is recommended by my company.
    Has anybody else experienced this issue?
    I have encountered Network Connect problems over the years (and similar error messages) and I am wondering if this message is related to OS and/or Java upgrades?
    Regards,
    Ben

    https://coderwall.com/p/_gpxpq/workaround-for-failing-juniper-network-connect-in -yosemite
    Text of site:
    The current version 8.0.7 of Network Connect and the latest Yosemite 10.10.1 don't like each other: you simply can't connect.
    A workaround (and it should be nothing more if you care) is to allow unsigned kernel extensions (which are unsupported/disabled in Yosemite by default):
    sudo nvram boot-args="kext-dev-mode=1"
    (reboot afterward) To revert this:
    sudo nvram -d boot-args
    Looks like this is also helpful for some other problematic extensions.

  • Extreme slowness with Juniper Network Connect

    Hi there,
    I recently switched from cable modem to fios and I am very frustuated with fios as the company vpn speed slows down gradually (while I never had any issue with cable modem) to 0.5 mbps from 50 mbps in a few hours. I often try restarting modem and reconnecting which helps sometimes. My company IT reported no problem and my colleagues on cable also report no problems with vpn. My desktop is directly connected to the cable modem via wire (not wireless).
    I would appreciate any suggestions.
    Thank you,

    While this is not a Windows 10 specific issue (it happens in Windows 8.x, too), I wanted to discuss it here to see there was a solution.
    When using either of my corporation's two VPN options, Juniper Network Connect and Juno Pulse, I cannot use any Modern apps that have network access.  BUT, this does not seem to effect Microsoft's Modern apps, like Mail or the Store.  
    As an example, Nextgen Reader, cannot synch with Feedly when I am connected to the VPN, but it works fine otherwise.  
    Yet, I can synch my OneNote notebooks or I can visit the Windows Store, so it doesn't seem to be strictly a problem with the VPN software. 
    Does anyone know of a work-around for this?  Is this something that can be better addressed in Windows 10 so this is no longer an issue?
    Do you you the VPN in Windows settings or install a client. My organizations info-structure won't allow to connect using the VPN built into Windows 8/10. In Windows 8 i installed the client and enter my companies connect information and it works. But the
    same thing doesn't work in Windows Technical Preview.
    Jake

  • Juniper Network Connect broken in IE 10

    Windows 8 x 64 Pro.... IE 10 has broken my VPN which uses Juniper Network Connect 7.1.8 are there any fixes on the horizon?  Anybody know? Anybody have the same problem?
    Thanks,
    Rick
    Rick

    Hi,
    Seems a software compatibility issue with Windows 8. I suggest you contact Juniper support for help since this involves 3rd party application.
    Juke Chou
    TechNet Community Support

  • Snow Leopard and Juniper Network Connect/How to temporarily disable Bonjour

    Hi All,
    I have encountered a problem with Juniper Network Connect running on my MacBook Air. I can connect successfully to my company's VPN but on my MacBook Air Junipers Network Connect started to dis- and reconnect in changing time intervals.
    After some googling I am pretty sure that it has something to do with the Bonjour service changing the routing tables. I wanted to confirm this and activated "Back to my mac" on my MacBook Pro which up to now did not had any problems connecting to my company's VPN. Now it has the same issues.
    My question is whether there is any way to temporarily disable Bonjour, ideally via Apple script. Up to now the only solutions I found were to either
    - disable mDNSResponder which would also prevent accessing any websites or
    - disable multicast advertisements (http://support.apple.com/kb/HT3789?viewlocale=en_US)
    The latter approach includes editing a properties file and restarting the mac, thus would be less than ideal for just quickly dis- and enabling bonjour. Furthermore I am not quite sure whether this really solves the problem of updating the routing table.
    Any advise is greatly appreciated.
    Thanks,
    equinox

    If you are using an Airport or Airport Express base station: go to Utilities>Airport Utility. When it's found the Airport, click on 'Manual Setup'. In the next pane, click on the 'Wireless' tab; when that pane opens click on 'Wireless Network Options...'. Check 'Create a closed network'.
    If you are using another manufacturer's wireless router you will need to look at their instructions, but the principle is the same - it may say something like 'Hide SSD'.

  • After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.

    After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.
    Anybody experiencing the same problem and any suggestions to fix the issue.

    Hi ..
    Try this discussion >  Can't connect to Juniper VPN

  • Juniper Network Connect Support with Fusion

    Hi, I'm trying to run Juniper Network Connect in my W7 partition using VM Ware Fusion, but I get the following error: nc.windos.app.24043 (a NC client is already configured on the client). Has anyone solved this?

    Hi BDAqua, thank so much for see my post.
    My path is /Applications/Symantec Solutions/Norton AntiVirus
    Thanks again
    Alex

  • Juniper Network Connect Error nc.mac.app.1203

    I have been trying to solve this problem for a while. Once Java got decoupled from OSX I started getting this error when Network Connect would launch. I have run out of options.
    nc.mac.app.1203
    Log files show this
    2011-12-01 23:02:23.182 Network Connect[p620.t6915] NCController.info -applicationDidFinishLaunching: Network Connect 7.1.0 (19243)/Version 10.7.2 (Build 11C74) starting (NCController.m:107)
    2011-12-01 23:02:23.245 Network Connect[p620.t6915] NCController.info -applicationDidFinishLaunching: launched from applet/application launcher (launchType: 1), waiting for parameters (NCController.m:142)
    2011-12-01 23:02:23.277 Network Connect[p620.t6915] DSIPCConnection.info -_clearIPCBuffer: Clearing the IPC buffer (DSIPCConnection.mm:526)
    Love to hear everyone's thinking on this one. I have tried on and off for awhile to fix.

    There is a thread about this in the Apple Developer's forum. Basically it looks like Apple changed the default password for the java truststore. I'm guessing it was accidental since the two passwords are very similar and they didn't notify even the Java developers of the change nor is it documented in the updates release notes. This affects:
    Java for Mac OS X 10.6 Update 1 - Java for Mac OS X 10.6 Update 1
    Java for Mac OS X 10.5 Update 6 - Java for Mac OS X 10.5 Update 6
    Personally, to err is human and I can accept that. The problem I have is that Apple is taking so long to fix this. The problem came almost 2 months ago and I noticed on the developer thread that one of Apple's Java developers instead of just admitting the problem instead went on some rant on how the Sun (now Oracle) Java development team needs to change how apps are installed. Whatever.
    The reality is this: Until the Oracle Java development team is convinced to change the way Java works and actual does it and Java developers have a chance to change their code this is the reality of the world. Suck it up and fix your broken stuff. Apple could have very easily released a new update that fixed this but instead it looks like their waiting for their next major update and in the meantime everyone else has to work around their mistakes. To be honest, I don't expect anything else from Apple; this is just how they operate.
    BTW, According to a Juniper KB, Juniper will be releasing an update to the SA boxes that takes this into account.

  • Juniper Network Connect - Error extracting component

    I am running OS X 10.5.8. After applying the update "Java for Mac OS X 10.5 Update 6" I receive the following error when attempting to start Juniper VPN (6.6 or 6.5.0) Network Connect:
    [Network Connect] An error occurred while extracting one of the Network Connect components
    I noticed this update disables Java 1.4.2; I tried re-enabling 1.4.2 in Java Preferences and also resetting defaults which disables 1.4.2 and re-orders the Java versions. Neither had any impact.
    Quesiton 1 - Is there a way to roll-back the update?
    Question 2 - Is there a potential fix other than upgrading to Snow Leopard and trying the fixes that have been published on the new release?

    There is a thread about this in the Apple Developer's forum. Basically it looks like Apple changed the default password for the java truststore. I'm guessing it was accidental since the two passwords are very similar and they didn't notify even the Java developers of the change nor is it documented in the updates release notes. This affects:
    Java for Mac OS X 10.6 Update 1 - Java for Mac OS X 10.6 Update 1
    Java for Mac OS X 10.5 Update 6 - Java for Mac OS X 10.5 Update 6
    Personally, to err is human and I can accept that. The problem I have is that Apple is taking so long to fix this. The problem came almost 2 months ago and I noticed on the developer thread that one of Apple's Java developers instead of just admitting the problem instead went on some rant on how the Sun (now Oracle) Java development team needs to change how apps are installed. Whatever.
    The reality is this: Until the Oracle Java development team is convinced to change the way Java works and actual does it and Java developers have a chance to change their code this is the reality of the world. Suck it up and fix your broken stuff. Apple could have very easily released a new update that fixed this but instead it looks like their waiting for their next major update and in the meantime everyone else has to work around their mistakes. To be honest, I don't expect anything else from Apple; this is just how they operate.
    BTW, According to a Juniper KB, Juniper will be releasing an update to the SA boxes that takes this into account.

  • Using Juniper Network Connect with Lion

    Has anyone had an luck using Network Connect to connect to a Juniper VPN with Lion? When I try to connect to secure network using Safari, Network Connect does not install and launch.

    What version of Juniper are you folks running?  We are still on 6.x (I'll have to check on what X is, I think its 5)
    I enabled the java "enable applet plug-in and web sstart applications" and it still gets stuck on our host checker screen.   I set the developer Safari 5.0.6 and it actually gets past host checker, but does not present an option for network connect.
    This tells me that host checker is running but no longer seeing what it needs to see (?) for the network connect option to be presented.   I was told by Juniper that an update needs to happen but it won't be availble until September.
    Can someone verify they can actually get a network connect session working using Lion and safari 5.1 and how they got it to work, and what version of Juniper they are on? 
    If we need to get to 7.x we can do it on a test box but moving production there will take a good long time.   We *just* enabled the Mac VPN service at our company, and now those upgrading to Lion are finding themselves once again without VPN capabilities.    This is a real problem as we don't control weather they upgrade or not, and everyone wants to get to the latest OS.
    Juniper is on its last legs at our company.  This is probably the straw... they should have had this tested by now.

  • Network Connection error when Trying to Install Windows Server 2012 R2 Essentials

    Thank you to anyone who can help me out here. I have a brand new machine with known working wifi and wired ethernet adapters (works under Windows 8.1) I am attempting to install Windows Server 2012 Essentials R2. During the install process, the system connects
    to the internet to download updates to help along the install. No problem here. Further down the road after restarting several times and now during the "Configuring Windows Server Essentials" step of the install, I am told "There is no network
    connection. Please fix the connection issue and try again."
    When troubleshooting the connection, I am told that the wifi adapter drivers may not be installed. I have a wireless card in the machine and have also tried disabling the wifi adapter and have been connected successfully via the ethernet port this whole
    time.
    Help, I'm stuck and have been to this point in the install 4-5 times already.
    Thank you.

    Is this a laptop?  Can you remove the wifi? Disable it in BIOS?
    Does the wifi have an IP and internet when it throws the error?
    BTW, when the wizard ask about updates say no.  Takes way too long and does not help anything
    Change the binding order and put the wired on top.
    The Steps?
    Just open your Network and Sharing Center. (Change adapter settings)
    Press an ALTkey on your keyboard to show the menu bar.
    Click on the Advancedmenu
    choose Advanced Settings option
    Adjust your binding order for your NICs to ensure your wired ones are at the TOP
    http://regularitguy.com/2012/12/06/how-to-change-nic-binding-order-in-windows-8-and-windows-server-2012/
    Grey

  • Error 109, network connection error while trying to install cs6 trial

    I am getting a error as described above while trying to install the CS6 trial. First time install on a new computer with Vista.
    any advice/ help..? Thanks

    hI Atul_Soni
    Error 109 indicates there were problems with your network connection.  Please try initiating a direct download by following the steps listed athttp://forums.adobe.com/thread/981369.  If you continue to experience difficulties then you may want to try an alternate Internet connection...
    For other error codes, please see the below link : http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assista nt.html
    Reasons and Solutions are provided in the above link.

  • After updating to 5.2.1 my network connection is sporadic/fails.

    Finally ran the update to 5.2.1 this morning. No problems with the installation. Now, my network connection cuts out in the middle of programs and then cannot be restored, even after restarting appleTV. At the moment, my network is up and running (I'm typing this on it!), but the network test in Settings fails. I cannot access Hulu+ or Netflix fail with AppleTV. I am connected via ethernet and both IP and DNS are configured automatically. (Which always worked fine before the update.) I have changed NO settings.
    I did get it to connect briefly after the update, but then while watching a video it cut out and cannot be restored. Is this a new ethernet problem?
    I am NOT currently trying to run AirPlay. I am simply accessing via the AppleTV remote.

    I just posted this question (same problem).
    Last week I had an update for Apple TV (3). (version 5.2.1.) Now the streaming is so slow (or not working at all) that I am even not able to play music. Playing movies became total impossible. And sometimes the complete connection is lost. Even my computer is slowing down (on the internet), perhaps because something is happening between my computer and Apple TV. It became a total disaster and I do not know how to solve this. Further nothing changed. I have the same WiFi router, Apple TV is still on the same place and I have a signal strength of 80% on Apple TV.
    Hans Lijnbach

  • Remote Desktop Connection Broker role fails to install

    Hi,
    I am having a situation where I cannot install the RDS Connection Broker on a Windows 2012 R2 that also has AD DS installed.  I understand with Windows 2012 R2, you should be able to do this.
    I suspect that the Default Domain Controller Policy might be a factor in this, but I have modified the "Log on as a Service" right to include the "NT SERVICE\ALL SERVICES" user as directed in article
    2832204. The issue persists.
    I have reviewed the event logs and the Windows Internal Database logs, and it appears the hang up is with the installation of the Windows Internal Database.  The C:\windows\wid\log\error.log file shows the following line just before the installation
    fails:
    2014-12-12 11:05:32.54 Logon       Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
    I am unsure where to go from here, but I tried renaming the C:\Windows\WID folder after a reboot to see if a clean install of the Windows Internal Database would fix it, but it still has the same issue.
    Some more information on the environment:
    Recently added this Windows 2012 R2 DC to a domain that previously only had a Windows 2003 domain controller. There were no errors with the DC promotion.  Windows 2003 domain controller still resides on the network as a DC (for now).
    Planning to install RD Connection Broker and RD Web Access role services to the new Windows 2012 R2 AD DS server. 
    Thank you for any assistance you can provide to resolve this issue.
    Tim

    Hi Tim,
    Thank you for posting in Windows Server Forum.
    Initially would like to say that it’s not best practice to have RDS and AD DS role on same server (Not recommended). There are various safety reason for this case.  Instead you can do one thing, install Hyper-v on physical server and then create 2 VM (one
    for AD DS and other for RDS) in this way you can achieve your goal. Please try to install as the mentioned way and verify whether you resolved you issue. For more information you can refer following article.
    Step by Step Windows 2012 R2 Remote Desktop Services – Part 1
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for