JUnit - Regular Expressions and all that Jazz
I can't help you with the JMeter-specific stuff, but your regex has a couple of regex metacharacters that need to be escaped. Also, the template should refer to group #1, becuase that's where the actual id number is matched.Reg Exp: <a href="appointmentDetailsPDA\.jsp\?id=(\d+)&
Template: $1$[/pre
Hello, FD-san
I�ve tried using a Regular Expression Extractor in
JMeter, with the following parameters, but this does
not seem to work:
Ref Name: ${appointment_id}
Reg Exp: <a
href="appointmentDetailsPDA.jsp?id=([\d]*)\&
Template: $0$
Match No: -1
Default: Specify the variable "appointment_id" without "$" and "{|}"
Just
Ref Name: appointment_id
Reg Exp: <a href="appointmentDetailsPDA.jsp?id=([\d]*)\&
Template: $1$ //$0$ refers to whatever the entire expression matches.
Match No: 0 // stores rendom of matches
Default:
in this case you can refer to:
appointment_id_gn - as to the n-th group of matches (n=0,1,2, ...)
appointment_id_g - as to the last number of group (number of groups - 1)
appointment_id - as to the group #1
Good luck
Similar Messages
-
Disk repair and permission repair and all that jazz ...
Sorry for the double post .... anyway,
This morning I followed all suggestions posted on this board,
and I did my first Disk Repair, twice, (from the DVD) and Permissions Repair from the boot drive. I shut down the system, then started it again five minutes later.
Then I downloaded Cocktail and MacJanitor, and ran permissions repair again. Then and ran both Cocktal and McJanitor applications.
I shut down my system for about five minutes,
started it up again, and nothing is broken still.
Things seem pretty much okay.
I thinkthe system boots up a little bit
quicker than before. But not much ...
The only wierd thing is that my Safari icon was missing form the Dock,
and also my Adobe PE icon on the dock is now a big question mark.
I'm not going to mess with it anymore for about a week. I don't want screw things up.
Thanks to everybody on this board who helped me figure all this out.
Now to my last question, for now anyway:
Do you all think it's a good idea to do the same things to my
G-Raid external firewire drive?
Thanks again.I did that. thanks.
Do you recommend I do a disk repair on my
external G-Raid firewire drive? It is a
Mac OS Extended format ..
There are no applications in it,
only large video files.
thanks -
For some unknown reason my application "Remote" no longer works. I deleted it from my phone. Signed out of Itunes and back in. Turned back on home sharing and all that jazz but it says it cannot find my itunes library. Is anyone else having this problem and if so how did you fix it? Thx.
Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
I have tried the hold the buttons down until it goes off and all that so how could I fix it.? It looks regular but I can't touch it and slide the slider or anything like that
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have working regular expressions and a working sql connection, but I don�t know how to stop the info from getting into the database when input doesent match the regular expression.
For instans, you put in an e-mail without an "@" and my program writes and error message. But the info still gets in to the database.
Any help would be much apreciated as I dont know where to start. If you have links or code examples that would be great to.
Thanx.Well, the obvious answer is "only write the data to the database if the input doesn't match the regular expression."
Presumably you're really asking how to do that - but it depends upon how your application is structured in the first place, and you haven't told us anything at all about that. -
Regular Expression and PL/SQL help
I am using Oracle 9i, does 9i support regular expression? What functions are there?
My problem is the birth_date column in my database comes from teleform ( a scan program that reads what people wrote on paper), so the format is all jacked up.... 50% of them are 01/01/1981, 10% are 5/14/1995, 10% are 12/5/1993, 10% are 1/1/1983, 10% are 24-JUL-98. I have never really used regular expression and pl/sql, can anybody help me convert all of them to 01/01/1998?
Does Oralce 9i support regular expression? What can I do if oralce 9i does not support regular expression? Thank you very much in advance.9i doesn't support regular expressions (at least not in the 10g regular expressions sense. There is an OWA_PATTERN_MATCH package that has some facilities for regular expressions). But it doesn't look like this is a regular expressions problem.
Instead, this is probably a case where you need to
- enumerate the format masks you want to try
- determine the order you want to try them
- write a small function that tries each format mask in succession until one matches.
Of course, there is no guarantee that you'll ever be able to convert the data to the date that the user intended because some values will be ambiguous. For example, 01/02/03 could mean Feb 1, 2003 or Jan 2, 2003 or Feb 3, 2001 depending on the person who entered the data.
Assuming you can define the order, your function would just try each format mask in turn until one generated a valid date, i.e.
BEGIN
BEGIN
l_date := TO_DATE( p_string_value, format_mask_1 );
RETURN l_date;
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
BEGIN
l_date := TO_DATE( p_string_value, format_mask_2 );
RETURN l_date;
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
BEGIN
l_date := TO_DATE( p_string_value, format_mask_3 );
RETURN l_date;
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
BEGIN
l_date := TO_DATE( p_string_value, format_mask_N );
RETURN l_date;
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
RETURN NULL;
END;Justin -
Find text using regular expression and add highlight annotation
Hi Friends
Is it possible to find text using regular expression and add highlight annotation using pluginA plugin can use the PDWordFinder to get a list of the words on a page, and their location. That's all that the API offers for searching. Of course, you can use a regular expression library to work with that word list.
-
Regular expression and output format
hi all,
i have following scenario-
regular expression: [0-9]{3}-[0-9]{3}-[0-9]{4}
generated value by the above regular expression: 123-234-6789
output format to display the generated above value: xxx-xxx-$1
now i need to display the generated value (123-234-6789) in the specified output format (xxx-xxx-$1) and the final output will be xxx-xxx-6789
how is it possible?
Note: here regular expression and output format can vary
br,
basharHi, Bashar
You can solve this problem by using the Data Masking Technique.
Masking data means replacing certain fields with a Mask character (such as an X). This effectively disguises the data content while preserving the same formatting on front end screens and reports. For example, a column of credit card numbers might look like:
4346 6454 0020 5379
4493 9238 7315 5787
4297 8296 7496 8724
and after the masking operation the information would appear as:
4346 XXXX XXXX 5379
4493 XXXX XXXX 5787
4297 XXXX XXXX 8724
The masking characters effectively remove much of the sensitive content from the record while still preserving the look and feel. Take care to ensure that enough of the data is masked to preserve security.
It would not be hard to regenerate the original credit card number from a masking operation such as: 4297 8296 7496 87XX since the numbers are generated with a specific and well known checksum algorithm.
Best Regards,
Mahfuz Khan -
"Match Regular Expression" and "Match Pattern" vi's behave differently
Hi,
I have a simple string matching need and by experimenting found that the "Match Regular Expression" and "Match Pattern" vi's behave somewhat differently. I'd assume that the regular expression inputs on both would behave the same. A difference I've discovered is that the "|" character (the "vertical bar" character, commonly used as an "or" operator) is recognized as such in the Match Regular Expression vi, but not in the Match Pattern vi (where it is taken literally). Furthermore, I cannot find any documentation in Help (on-line or in LabVIEW) about the "|" character usage in regular expressions. Is this documented anywhere?
For example, suppose I want to match any of the following 4 words: "The" or "quick" or "brown" or "fox". The regular expression "The|quick|brown|fox" (without the quotes) works for the Match Regular Expression vi but not the Match Pattern vi. Below is a picture of the block diagram and the front panel results:
The Help says that the Match Regular Expression vi performs somewhat slower than the Match Pattern vi, so I started with the latter. But since it doesn't work for me, I'll use the former. But does anyone have any idea of the speed difference? I'd assume it is negligible in such a simple example.
Thanks!
Solved!
Go to Solution.Yep-
You hit a point that's frustrated me a time or two as well (and incidentally, caused some hair-pulling that I can ill afford)
The hint is in the help file:
for Match regular expression "The Match Regular Expression function gives you more options for matching
strings but performs more slowly than the Match Pattern function....Use regular
expressions in this function to refine searches....
Characters to Find
Regular Expression
VOLTS
VOLTS
A plus sign or a minus sign
[+-]
A sequence of one or more digits
[0-9]+
Zero or more spaces
\s* or * (that is, a space followed by an asterisk)
One or more spaces, tabs, new lines, or carriage returns
[\t \r \n \s]+
One or more characters other than digits
[^0-9]+
The word Level only if it
appears at the beginning of the string
^Level
The word Volts only if it
appears at the end of the string
Volts$
The longest string within parentheses
The first string within parentheses but not containing any
parentheses within it
\([^()]*\)
A left bracket
A right bracket
cat, cag, cot, cog, dat, dag, dot, and dag
[cd][ao][tg]
cat or dog
cat|dog
dog, cat
dog, cat cat dog,cat
cat cat dog, and so on
((cat )*dog)
One or more of the letter a
followed by a space and the same number of the letter a, that is, a a, aa aa, aaa aaa, and so
on
(a+) \1
For Match Pattern "This function is similar to the Search and Replace
Pattern VI. The Match Pattern function gives you fewer options for matching
strings but performs more quickly than the Match Regular Expression
function. For example, the Match Pattern function does not support the
parenthesis or vertical bar (|) characters.
Characters to Find
Regular Expression
VOLTS
VOLTS
All uppercase and lowercase versions of volts, that is, VOLTS, Volts, volts, and so on
[Vv][Oo][Ll][Tt][Ss]
A space, a plus sign, or a minus sign
[+-]
A sequence of one or more digits
[0-9]+
Zero or more spaces
\s* or * (that is, a space followed by an asterisk)
One or more spaces, tabs, new lines, or carriage returns
[\t \r \n \s]+
One or more characters other than digits
[~0-9]+
The word Level only if it begins
at the offset position in the string
^Level
The word Volts only if it
appears at the end of the string
Volts$
The longest string within parentheses
The longest string within parentheses but not containing any
parentheses within it
([~()]*)
A left bracket
A right bracket
cat, dog, cot, dot, cog, and so on.
[cd][ao][tg]
Frustrating- but still managable.
Jeff -
Regular expressions and backreference
Hello!
I am trying to use backreferences in REGEXP in the PERL-style, where I want to match my regular expression and later refer to the grouped values. I can read that those are referecenced with \1 .. \9, but I simply cant get it to work. Here is an example in PL/SQL:
SELECT REGEXP_SUBSTR(l_users.adresse,'([A-Z]+)\s+(\d+)')
INTO l_dummy_varchar2
FROM dual;
OR I could do things like:
l_dummy_varchar2 := REGEXP_SUBSTR(l_users.adresse,'([A-Z]+)\s+(\d+)');
It seems to work, but I cant figure out how to get the backreferenced value.
I would love to do things like:
dbms_output.put_line('my value ='||\1)
but this doesnt work.
Help is very much appreciated.
Best regards
DannieLikewise you can extract things using the
REGEXP_SUBSTR, but you don't need back
referencing...backreferencing is better than additional function (ltrim) use, and BTW be careful with this "ltrims":
SQL> set serveroutput on
SQL>
SQL> DECLARE
2 v_txt VARCHAR2(100);
3 BEGIN
4 v_txt := ltrim(regexp_substr('HERE IS AN ASCII CHARACTER', 'IS AN [[:alnum:]]*'),'IS AN ');
5 DBMS_OUTPUT.PUT_LINE('Word after IS AN: '||v_txt);
6 END;
7 /
Word after IS AN: CII
PL/SQL procedure successfully completed
SQL>
SQL> DECLARE
2 v_txt VARCHAR2(100);
3 BEGIN
4 v_txt := regexp_replace('HERE IS AN ASCII CHARACTER', 'IS AN ([[:alnum:]]*)|.','\1');
5 DBMS_OUTPUT.PUT_LINE('Word after IS AN: '||v_txt);
6 END;
7 /
Word after IS AN: ASCII
PL/SQL procedure successfully completed
SQL> -----------
VB
http://volder-notes.blogspot.com/ -
Juniper MX Regular expressions and user permissions ACS 5.4
Hi everyone!
Im having some trouble with regular expressions and permissions on our Juniper MX routers through ACS 5.4, and i would like some insight/help/poitners!!
We have a team of engineers that should only have read only permissions (important: show configuration) and also be able to just change the description on interfaces.
Thus far with the following regular expressions set for the shell profile they are going through i have managed the above, however the problem is when an engineer inputs "Show configuration", only the interfaces descriptions configuration is shown! The rest of the configuration will not be printed.
deny-commands1=.*.
allow-commands1=configure
deny-configuration1=.*.
allow-commands2=interfaces .*. description .*$
allow-configuration1=interfaces .*. description .*$
allow-commands2=show configuration.*
allow-commands3=show configuration
(some of these regex i know that are not needed, i was just playing around to check everything before posting)
Any pointers as to why or how to resolve this?
example output with the above:
show configuration
## Last commit: 2014-01-09 09:34:44 EET by someone
interfaces {
xe-0/0/0 {
xe-0/0/1 {
description xxxx;
xe-0/1/0 {
description xxxx;
xe-0/1/1 {
description xxxx;
xe-0/2/0 {
disable;
xe-0/2/1 {
description xxxx;
xe-0/3/0 {
description xxxx;
xe-0/3/1 {
description xxxx;
ae0 {
description "xxxx";
ae1 {
description xxxx;
demux0 {
lo0 {
{master}
Thanks in advance!
SpyrosYou are absolutely right!! I was doing research online after posting the above. The correct RADIUS attribute to use is actually CVPN3000/ASA/PIX7.x-Group-Based-Address-Pools. Then create the pool in ASA, and call that pool's name in ACS under that RADIUS attribute. Someone explained this perfectly in this community before. Much appreciate your answer!
Here's from another post last year:
ACS 5 does not have the feature of IP pools. Logically its always good to setup pools locally on vpn server and if you want user to pick ip from specific local pool you can configure acs to push that attribute.
On ACS Go to > Policy Elements -> Network Access -> Authorization Profiles -> Create ->
Name of the Policy ->Dictionary Type: Radius-Cisco VPN 3000/ASA/PIX7.x
Attribute Type : CVPN3000/ASA/PIX7.x-Group-Based-Address-Pools
Attribute Type: String
Attribute Value : Static MYPOOL (Name of the Pool which is defined on the ASA)
Access Policies ->Default Network Access -> Authorization -> Create -> Under result section call the Authorization p -
Hello,
I have an XML file containing regular expressions and i parse the file, extract the pattern from it and search for it using java regex package. The problem is it works fine when patterns are words but when the pattern is something like
write \\d+ (write followed by a space followed by one or mre digits) it doesn't work.
I wrote the same code but with the pattern embedded in it,ie. without using XML and it worked. But when extracting with XML it fails.
Also if the pattern is write[0-9] it only extracts write[0-9 and gives an error of no closing bracket.
Could anyone please tell me what i am missing out
Thank youthank you for your replies. Well i have still no got over the problem so i am posting my code here and hoping it can get solved
import org.xml.sax.*;
import org.xml.sax.helpers.*;
import java.io.*;
import java.util.regex.*;
class textextractor extends DefaultHandler{
boolean regex=false;
public void startElement(String namespaceURI,String localName,String qn,Attributes attr)
if(localName.equals("REGEX"))
regex=true;
public void characters(char [] text,int start,int length)throws SAXException {
String t=new String(text,start,length);
boolean flag=false;
if(regex==true)
Pattern pattern;
String w=new String(t);
pattern = Pattern.compile(w);
Matcher matcher;
matcher=pattern.matcher("there is a bat read write 13 error at line ");
while(matcher.find())
flag=true;
System.out.println("I found the text \"" + matcher.group() +"\" starting at index "
+ matcher.start() +"and ending at index " + matcher.end() + ".");
if(!flag)
System.out.println("not found");
regex=false;
public class saxt2 {
public static void main(String args[]) {
try {
XMLReader parser= XMLReaderFactory.createXMLReader();
ContentHandler handler=new textextractor();
parser.setContentHandler(handler);
parser.parse("d:\\regex.xml");
}catch (Exception e) {
System.err.println(e);
}The xml file is
<RegularExpression>
<REGEX>write</REGEX>
<REGEX>write \\d+</REGEX>
<REGEX>read[0-9]</REGEX>
</RegularExpression>by running the code you can see that write is found,write \\d+ doesn't match write 13 in the string and read[0-9] gives and error.
Any help will be greatly appreciated -
My mum set up an iCloud account for my iPhone 4 but forgot the password. This caused me to create a new account, and it can be used for the App Store and iTunes and all that, but I can't change the initial iCloud account (the one my mum made). My device keeps prompting me for the password every few minutes after updating to iOS 8, and I've tried every option possible to retrieve the password, but I don't even know the answers to the security questions and I can't find the password reset email anywhere and I don't know the back up emails my mum used. I literally cannot find any legitimate way to sign out of the initial iCloud account without entering a password (which neither I nor my parents know). Is there a way for me to retreive the password or change to my new account without the password?
See:Creating an iCloud account: Frequently Asked Questions and How do I mange iCloud account about 3/4s of the way down.
-
I was trying to upgrade and all that seems to happen is I get a verification screen after I click on the "upgrade now" button? I've tried it a couple of times but it seems to be in a constant loop.
Hi John,
I'm sorry that you're having trouble purchasing your upgrade. What are you trying to upgrade to? I've checked your account, and didn't see any stalled orders.
Have you tried logging in to Adobe.com from a different web browser?
Best,
Sara -
I have an Adobe Flash Professionals digital classroom book and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static, and input. Where is the TFL and Classic ? I watched adobe learning center but he was using CS5. Can anyone please help?
Hi,
Do you use Flash CS6 to follow the instructions in the classroom book? If yes, then you can find it under text drop down for an AS3 Document as shown below
If you follow the instruction in Flash CC or Flash CC2014 then you will not find this option as this is deprecated.
Thanks!
Mohan
Maybe you are looking for
-
Too low(400Kbyte/sec) speed with USB MSI-6545 (and printer HP-1200, sc
Hello! I Use motherboard MSI-6545(i850, with 3 USB 1.1 ports), printer HP Laserjet-1200 and scanner HP scanjet-5400. OS Windows Xp pro SP1. 2 cables USB are length 3m. I have found that speed of downloading from scanner to PC and from PC to printer
-
Need to edit erroneous entries in iTunes Info autofill lists (artist, genre)
Bad entries in iTunes appear (autofill feature) when i am filling in artist, composer, genre, etc. Need to correct and clear out these bad entries. TIA for all your help. Regards, Allan.
-
Google maps problem...please help...!
I've got an iPhone 4 running 4.0 software and I have an issue with google maps. The program seems to operate fine with one exception...all my interstate and state highway labels are placed underneath the roadway...in other words the roadways are on t
-
Can I install on multiple computers?
Where can I find the license agreement that states whether or not I'm able to install Snow Leopard on multiple computers?
-
Je n'ai pas de vibreur quand ont m'apelle quand je suis en silencieux. J'ai fais les réglages et mis le petit boutont de côté en mode silencieux mais rien. Juste les message ou autre notification ou ça vibre mais sinon quand j'ai un appele il ne sa p