Just a brief note to say "WOW"

I'm so busy right now that I don't even have time to eat.
But I just wanted to post to say that I thought TechEd 2008 was remarkable, from the perspective of an SAP Mentor - particularly the meeting with Zia and the "suggestion" agenda that came out of it.
Also, the opportunity to thrash out with Horst/Thomas/Thomas the question of what SAP has actually sacrificed to get its "70-percent" solution using network calls for all database I/O.
Also, and perhaps most importantly, the Innocentive agenda - again, "wow - what a great move!.

I saw that, Craig ...
And I was going to reply to it with Michael Corleone/Al Pacino's quote:
Just when I thought I was out... they pull me back in.
Because, after all, didn't Stephen call me one of the "godfathers" of the CC?

Similar Messages

  • I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

    I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

    Hi joe beischel,
    Kindly post this query in Acrobat forums:Acrobat
    Regards,
    Florence

  • I just bought a power adapter and it is not working, says "not charging".   The same for the mobile charger.   Anything I need to do in the setting?

    I just bought a power adapter and it is not working, says "not charging".   The same for the mobile charger.   Anything I need to do in the setting?

    The device is locked to the carrier it was purchased through unless you specifically purchased it as unlocked directly from Apple.
    Only the carrier to whom it is locked can authorize it's unlocking.  To do so, the user much contact them to start the unlock process.

  • Just updated IPad 2 to IOS8 and now have no 3G service  have WIFI but not 3G  Says No Service at top

    Just updated IPad 2 to IOS8 and now have no 3G service  have WIFI but not 3G  Says No Service at top

    I am really sorry I upgraded so quickly to ios8.
    Not only do I not have my ATT but my pics "events from mac" are in some unknow order.  I have 220 folders that are not alpabetized.  I cannot find any pictures.
    On the Macbook Air the events are perfect, all in alphabetic order.  When they transferred they are mixed.  Faces are mixed now.
    THis new operating system is horrible.  How do I go back to 7.
    And the ipad 2 is so slow now.  There are no positives!

  • I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    You need to reinstall the printer driver, and set up the printer on the new hard drive.
    The Canon site should have the driver. Download it and install.
    Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

  • HT4993 i will be texting somebody and i lock my ipod, then i see messages just pop up but they say from 5 mins ago.. but they just apperared on my sceen i know its not big but yea

    Hey Everybody,
         This is the situation: i will be texting somebody and i lock my ipod, then i see messages 10mins. just pop up but they say from 5 mins ago.. but they just apperared on my sceen?? Anyway there is no wait in between the message being sent and me recieving it?
                                                                                                                        Thankyou Eveybody !

    I have the same question what time did you chat ? Just because you were speaking with someone that is representing Verizon does not mean you were speaking to a "Customer Service" agent. Customer service is only open during specific hours. After those hours the only people online is the Online Sales Department. It is very possible you were chatting with the sales department.

  • I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

    i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

    If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through. 
    First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you. 
    Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication. 
    Let me know! Happy holiday! 

  • I just updated my ipad. my home button does not work. it is just sitting on a screen saying  ios6. what do i do?

    i just finished updating  ipad to IOS6! my home button quit working a little while ago. now my ipad is just sitting on a screen saying IOS 6. what do i do to get to my home screen and open my ipad?

    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.

  • Adobe Fireworks cs6 is not opening .Saying internal eror occured  help me please

    Adobe Fireworks cs6 is not opening .Saying internal eror occured  help me please :

    For me the Fireworks stopped when it got to "Intializing Tab Windows", then a crashed and  displayed "Could not complete your request. an error occurred" and would never load. Basically dead. I couldn't use it at all. My whole workfow came to a stand still.
    BACKGROUND
    Just before this happened, I was trying a new feature from within Dreamweaver. While inside Dreamweaver, I could double-click an image file and it opened in my Fireworks to be edited. I thought . . . Wow, this is really cool. I edited that image and closed it and continued on my work. Since then, that "Connection" between applications has become permanent. Fireworks "THINKS" it is still connected to Dreamweaver. Later Fireworks would NOT open/load at. I would always get the above error.
    PARTIAL SOLUTION
    BTW: I had to do this twice, because the first time, I missed a file somewhere.
    I had to completely uninstall all ADOBE applications. I mean everything! I had CS3 & CS4 and Adobe Readers on my system.
    Since I'm on the mac, I went through the "Application Support" both user and system and the "Preferences" for both user and system and deleted everything that had either "adobe" or "macromedia" in it. There was also a file in the "Launch Agent & Daemons".
    I emptied the trash and did a power off restart. Then I reinstalled CS6. Now Fireworks at least loads and I can use it again, but it still isn't the same.
    OBSERVATION
    Fireworks and Dreamweaver are still "Connected". It won't save an existing PNG file as itself, it displays an error, "That file is open in another application", which is NOT true. I have to use the "Save As" option, and use the Finder to rename that file. I also notice an extra file labeled ex:0000056 which looks like the file I tried to save.
    So at least I can use my Fireworks again although it is irritating. I don't know how to "CUT" the connection between applications. Uninstalling & reinstalling did NOT reset this, the only option left would be a backup, wipe and fresh install of my entire laptop. I just don't have time to do that right now. Hope that helps someone else.
    Arlene

  • I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

    I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".  I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service.  Is there something I should do to my IPAD?  I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions).  I don't know what to do next. My IOS version is 6.1.3.  I did go into Network from the general tab and I see it says "SIM not provisioned".    HELP and Thank you in advance.

    Hello Theresa818,
    Thank you for using Apple Support Communities!
    It sounds like the cellular data will not activate for some reason on the iPad.
    I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
    Check for a carrier settings update.
    Update your iPad.
    Toggle the Cellular Data setting off and on under Settings > Cellular Data.
    Restart your iPad.
    Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
    If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
    Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPad as new.
    If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
    I know you may have done one or two of the steps here, so you can skip those.
    Take care,
    Sterling

  • Error: File just captured could not be read and was deleted after capture.

    I was just recording an extremely important interview. I have recorded literally 10.000 recordings before with the same setup, every day, over a period of some three years now. I'm recorging DV PAL through SDI input on a AJA KONA LS card.
    It seemed to be going well last night while recording but as soon as I pressed 'Esc' to end the capture I got an error message saying (not exactly in these words) : Error: The file just captured could not be read.
    The file couldn't be found anywhere on the HD or in the trash. Usually when something goes wrong during capture, you can find the file in the capture folder named 'filename-av'. Not this time, I have never seen this error message before.
    The person being interviewed was absolutely furious and said he would not do the interview again. So I'm up against the wall here, and need to recover the files.
    What's more, the problem still persists. When I try capturing again, as soon as I stop the same error occurs. So now my FCP is not capturing anymore
    I tried running Data Rescue 3.1 and found the recording in deleted files, but:
    1. the recording is in several parts (not sure if it's all there, but probably most of it)
    2. Data Rescue 3 interprets the files as .dv files, as opposed to .mov files as all my other recorded material.
    3. THERE IS NO AUDIO IN THE .DV FILES, which pretty much nullifies the file recovery altogether.
    I tried googling this error, but it did not help much:
    1. None of the people were capturing the same way I do (most were capturing from tape, none straight through KONA SDI input)
    2. There was no solution to prevent the error.
    3. No solution to recover the files either.
    I must say, this experience really taught me the essence of Murphy's law: 'Anything that can go wrong, will go wrong at the worst possible moment'
    Any suggestions as to the reasons for this?
    Any suggestions as to how the files can be recovered?

    Good news!
    I beleive I have found the cause and solution.   At least now I am able to reproduce the problem at will and therefore, hopefully prevent it.
    I discovered that there is nothing wrong with my AJA KONA setup, as I was able to capture with both QuickTime movie capture and Adobe Premier just fine.  But every time I try capturing in FCP I get unreadable capture files (since 2 days ago).
    Trying all possible capture settings, capture presets or easy setups did nothing.  (although capturing thru Firewire still works every time).
    I was about to give up when I noticed that where I usually have my video scopes window running, for convenience sake, under it the Voiceover utility was running.
    So here is the deal:  Usually when you try and capture with the Voiceover utility running, you can't. FCP wont allow you to capture, it will return an error message saying: 'Log and capture can not be opened while Voice Over is running. Please close Voice Over and try again.'  As it turns out, this warning is probably for a good reason.
    BUT...
    If you shut down FCP with Voice Over running and start it up again THEN you CAN run Log and Capture at the same time... everything looks OK, until you stop the recordin, then you get an error message saying your recording is screwed.
    I tried this over and over again,  every time it behaves the same way.  Shutting down with VO util>starting up again>recordings get screwed  .. close VO utility>back to normal operation.
    I'm not sure if it was the VO utility the last time this happened (few weeks back), but it might very well be.  I might not have noticed that the VO utility was running as it was hidden behind the videoscopes and there are no warnings when running Log and Capture if you start up FCP with VO utility still running.
    My educated guess to what is going on is that the VO utility is taking up priority over the sound inputs and by doing so making the audio of the capture unreadable.  This theory is supported by the fact that when my data recovering experts found the recordings on the HD, there was no audio on the files, but the video was intact.
    The only reason setting up the AJA drivers helped in the past was probably because that flushed the FCP settings and in doing so closed the VO utility window. How very ironic
    Hope this helps someone out there. And I hope Apple find a way to prevent this from happening.
    cheers!
    Vidar F.

  • When I download applications such as Internet Explorer, Yugma, and iTunes in Firefox, I just get a window that says "save" or "cancel", but never one that says "run" so I don't think it's actually installing anything. Then when I try to open whatever I d

    When I try to download applications such as Internet Explorer, Yugma, and iTunes in Firefox, I just get a window that says "save" or "cancel", but never one that says "run" so I don't think it's actually installing anything. It shows up in a "download" window, then the icon shows up on my desktop. When I click on it to launch it, it says "open with" and I get the same "save/cancel" window. It's a continuous circle. What am I doing wrong??
    == This happened ==
    Every time Firefox opened
    == I don't know. I never downloaded apps through Firefox until all of a sudden Internet Explorer didn't work. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322)

    What application are you choosing to open the files with?
    Because of how integrated it is with windows IE should work. If it's not working, something more widespread could be wrong with your computer that would also prevent other browsers from working properly. Of course we'd love you to stick with Firefox, but you should get help with IE, too.

  • Firefox does not open, says it's running when trying to restart, but does not show up

    Cannot get Firefox to visibly run. Will not open in safe mode and will not close (says its running when I attempt to shutdown or restart computer. Have uninstalled Firefox and reinstalled 8.0 several times and nothing has changed. Have scanned , defragmented, etc. computer and tried a couple system restores as this once cured similar problem with Firefox several months ago.

    Bring up the Windows Task Manager, but look in the "Processes" tab for firefox.exe,
    and close it from there, it won't do you any good looking for it in the "Applications"
    tab when you don't see it on the system taskbar.
    closing Firefox properly, and for when you just want to close and
    restarting Firefox immediately, see more information in
    : https://support.mozilla.com/questions/866027

  • HT1338 Just bought a new iPod - says I need itunes 10.7 - downloaded it, now says I need to update my OS software.  I go to update my OS software and it says I'm up to date - any advice?

    Just bought a new iPod - says I need itunes 10.7 - downloaded it, now says I need to update my OS software.  I go to update my OS software and it says I'm up to date - any advice?

    Your Tag states you are running OS X 10.5.8 = Leopard... If this is the case... read on...
    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
    Be sure to make a Backup of your Current System Before Upgrading...

  • HT201210 I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?

    helpppp
    I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?

    See if this helps: http://support.apple.com/kb/TS3694#USB
    If it does not help, the drop probably damaged something inside the phone.

Maybe you are looking for