Just a Few Recording Questions

Hey everyone,
I have a few questions about how garageband works...
Do you have the ability to record multiple tracks at the same time using firewire and keep them as separate tracks?
Can you then play back those tracks all at once and simultaneously record another track?
As stated, I would be using firewire to record and the headphones jack for monitoring.
Thank you very much!

Tom Bacho wrote:
Do you have the ability to record multiple tracks at the same time using firewire and keep them as separate tracks?
http://www.bulletsandbones.com/GB/GBFAQ.html#recordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)
Can you then play back those tracks all at once and simultaneously record another track?
yes

Similar Messages

  • Just a few small questions :)

    hi guys, just had a few small questions incase any of u can shed some light on the subject
    1 - i have removed my Sound Blaster Audigy and i am now able to reach 2.5GHz easily, when the audigy was installed, i could never get over 2.4Ghz, why?
    2 - i have increased my vcore to 1.7 yet am experience lower idle temps with c'n'q enabled eg...2.4GHz @ 1.55v would idle at 29c.....2.5GHz @ 1.7vcore idles at 23c, how?
    3 - moving my ballistix ram into dimm slot 3 i am now able to go 1:1 to 228 htt at timings 2.5,2,2,10 easily...when the ram was in dimm slot 1 i couldnt go 1:1 over 200 htt, why?
    if anyone can comment or provide answers i would be most greatful
    thanks guys
    mike XxX

    NetStream.send() should usually be faster than NetGroup.post(), especially when using 1:1 NetStreams (vs Group NetStreams).
    when groups are large, there's no passive way to tell when members join or leave.  however, for small groups (less than about 15 members), they will be "fully meshed", meaning every member has a direct connection to every other member.  when that's the case, you can see the NetGroup.Neighbor.Connect/Disconnect events on a NetGroup.  to receive those, you must create a NetGroup with the same groupspec as your NetStream and listen for NetStatusEvent.NET_STATUS events.
    your function "msg" must be a method on the subscribing NetStream's "client" object to receive NetStream.send()s from the publisher.
    this is all generic ActionScript stuff.  i don't know how to use Flash CS5 but this stuff should all be the same in Flash and Flash Builder.
    -mike

  • Video Networking -  just a few minor questions!

    Hi there,
    I have a monster dual core mega PC that i just bought, it's awesome and I love it dearly, but my 2 girl room-mates both have Macs! one - an ibook G4, and the other - a powerbook G4.
    I have created a folder on my computer called Video and in it i put loads and loads of TV shows and movies for them to watch. I can get their computers connected easily and even copy / play the files, but I do have a few questions...
    1. After I initiate the share on the macs, there is a cool "Videos" icon on the desktop that links it to my computer, but whenever they restart, that icon disappears! how do I get it to stay??
    2. Mac has really crappy support for Divx and Xvid, I tried downloading Divx player but it doesn't work well and doesn't give that many options (like buffer control, which is very important when viewing within a network, do you guys recommend another video player other than quicktime and divx player? on the PC I use BS Player or TCPMP, anything like that for the mac?
    3. how do I make mac always open an extension with the same program? right click (or ctrl click) and choose - Open with, and than tell it - Always open with the same program, but it just saves it for THAT SPECIFIC FILE and not the extension. And I can't even do that on the network folders since they dont have write access, only read.
    Thanks for your time and attention,

    1. When the share is connected, click on the icon on the Desktop and hit Command-L. This will create an alias, or shortcut to the share. Drag this shortcut anywhere thats convenient for you. Double-clicking on the shortcut will mount the share if it is not already mounted. You can add it to the sidebar in the Finder for quick access.
    2. Have you tried looking into a program called Video Lan Client? It handles a wide number of formats, and it streams over a network fairly well in my own experience.
    3. Highlight a file with the extension whose application association you wish to change. Hit Command-I to get an information window on that file. Down towards the bottom of the information window is a section called "Open With:". It has a pop-up menu that lists the applications you have installed that have registered with Launch Services as a viable means of opening that file. Choose the application that you want to be the default, and then click the button "Change All..." to associate every file with that extension.

  • Just a few beginner questions

    Hello, i'm interested in getting the creative cloud membership, but i just had a few questions to ask:
    1. Can i take advantage of the ecommerce features of BC without publishing to BC? (ie publishing to godaddy with their storage level support)
    2. if not, if i choose not to renew my subscription, will my client lose their site? or more importantly, what happens to their sites in general if i do?
    3. What if a client wants to update to another level of the service?
    Thanks in advance

    Hi,
    1) No you cannot run eCommerce module outside of BC. You can only point your domain externally to like GoDaddy but you'll still need to point DNS back to BC "external DNS". - http://kb.worldsecuresystems.com/157/bc_157.html
    2) Client will not lose their site as long as their invoice is up to date and paid.  You clients can be billed directly by you or BC. 
    3) I believe you mean if the client wants to upgrade to another plan, etc which they can just submit request to our accounts team.
    - http://helpx.adobe.com/contact/index.html (locate Business Catalyst -> submit case)
    Kind regards,
    -Sidney

  • Aperture Newbee - Just a few random questions.

    I'm thinking about buying a new macbook pro 17" and Aperture. I've played around with it at an apple store and its awsome in my opinion.
    My questions are, will a Canon S1 IS work with Aperture?
    My second question is can I import my iPhoto library in to Aperture?
    Thanks Taylor

    Hi Paul,
    Yes you are quite right about this, but it's not the full story. Aperture does get its support for RAW from the OS (CoreImage). That's the engine, and it seems to parse most of its work out to the GUI (despite my 4 x G5 horses sitting around doing nothing). However, the parameters driving the REQUIRED conversion of RAW to visual image for the SPECIFIC CAMERA are held in RAW.PLIST. I tried to edit this for my own point-n-shoot (Canon Powershot s40), and failed to get a good image. Every camera apparently needs different param. values based on the physical sensor array, pixel sensitivity, and conversion of signal to chroma color, etc.
    My prime cameras are covered (Canon 20d).
    I've tried in vain to find where iPhoto keeps its RAW parameters, as it must do this camera specific conversion also. Whether it does it on CPU or GPU (my guess is CPU), the camera specific parameters to decode the camera's proprietary RAW are still required. (BTW, DNG does not help, as the data held is still camera specific even though the format is universal. Pathetic really isn't it?) However, it does explain why many have commented on the far better RAW conversion in AP vs.iPhoto, even when AP was at 1.0 (more time by the developers balancing params between color saturation and luminosity perhaps as they focused on fewer cameras???).
    So my questions to Aperture Development and Joe is this:
    - WHY can't you at LEAST give us iPhoto level support vs. no support, and
    - WHY do we have to await an update of the OS, when the parameters are externalized in RAW.PLIST and that could be updated at any time?
    - What am I missing other than time available/testing needs etc.? Surely you must desire to get these complaints put behind you?

  • Just a few simple questions

    1. Is it taking 5 days for me to receive my phone when it's getting shipped from a place that is 70 miles from where I live?
    2. Was I promised I would have my phone by the 23rd and still not have it? 
    3. Was I told last Tuesday that It was 100% getting overnighted Thursday and I would have the phone by Friday only to reieeve an email Friday that is was shipping but getting sent 2 day and I will get it on the 29th?
    Any help would be great!!!

    Just curious, but what kind of help were you expecting here?  This is a "Peer-to-Peer" forum.  Here is what is says at the top of the topics page.
    Announcements
    These Forums are a peer-to-peer support channel in which users help other users. If you need an answer from Verizon directly please Contact Us.

  • Just A Few A Questions :)

    Firstly Hi and thank you for responding!
    1) Why do BT insist on having it's customers to pay for a phoneline when Infinity (Fibre Optics) have no need for the phoneline it's a different connection?
    2) Why are the contracts 18 months and not 12 months? Also why can i not change my usage/service until 18 months when my contract is finished?
    3) Where in my contract does it say that it is a 18 months contract? and if i haven't physically signed anything i am bound to that contract?
    Kind Regards
    Rick 
    Jesus said to him, “I am the way, and the truth, and the life. No one comes to the Father except through me.
    (John 14:6 ESV)

    For FTTC you still need a phone line. Part of the line is copper (from the cab to the home) and therefore it has to be rented from Openreach.
    18 month contracts are how BT Retail wish to do business. You can upgrade during your contract, but to downgrade there may be charges.
    A verbal agreement by phone or an online order is enough for a contact. You don't need to physically sign anything.
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Schultz...just a few more questions while i am here..

    How does one obtain a startup disc/recovery disc..I did not make one when I first purchased my laptop...Live and learn huh? thanks again...schultz

    You have to create a set of recovery disks from the hidden recovery partition by using the Recovery Disk Creator.  Go to "Start - All Programs - Toshiba - Recovery - Recovery Disk Creator".  Information on using the Hard Drive Based Recovery Process and creating the disks normally begins on or about page 58 to 60 of your User's Guide.  The User's Guide is found on your hard drive in Adobe Acrobat Format and can be downloaded from the Product Support Link at the top of this page. 
    If you didn't make them and can not do so now you'll need to purchase a replacement set as per this post. 
    http://laptopforums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-media/td-p/9148
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • JUST A FEW MORE QUESTIONS...

    What does In/out of holster mean!?
    and why is sometimes, my screen lovely and bright, but normally dull!?!?!? then randomly it will go very bright! 
    Please help! 
    Thanks

    atoosa wrote:
    What does In/out of holster mean!?
    When you purchased your BB, it should have come with a leather type holster, in which there is a magnet that will shut down the screen of the BB when it is inserted in the holster, to cause a Standby condition of the BlackBerry.
    So, you can set thet Profile settings of your BB to act different IN holster and OUT of holster. Say, IN your holster on your hip, you might want VERY LOUD volume ringtone settings, and OUT of the holster when sitting on your desk, you might set quieter volume for the ringtones.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • EOS rebel T3i: why is video recording suddenly shutting down after just a few seconds?

    I have made dozens of movies with this card. Suddenlly the camera automatically shuts down video recording after just a few seconds. I've made dozens of movies with this card. Reformatted card. Still happens.

    Sounds like a bad memory card. Have you tried another card? 
    Mike Sowsun
    S110, SL1, 5D Mk III

  • Multi-track recording question

    Multi-track recording question
    Hey, just need some help on multi tracking using audition, hope this is the right forum?
    Wanted to know if anyone has a clue about assigning inputs from an audio interface to separate tracks on a recording program (ie: Adobe audition)
    I record live with my band alot, and have every amp and the kit mic'd up, but how do i make it so that each microphone is recording to a different track on the PC?
    My interface is an M audio fast track ultra, if that is of any use.
    Any advice appreciated! Thanks!

    FreeCT wrote:
    Wanted to know if anyone has a clue about assigning inputs from an audio interface to separate tracks on a recording program (ie: Adobe audition). I record live with my band alot, and have every amp and the kit mic'd up, but how do i make it so that each microphone is recording to a different track on the PC?
    In Audition, assuming that you can see all of the inputs available in the Hardware Setup, you find the right-facing arrow (input assign) on each track in MV's Main view, and you click on the box it's pointing to, go to Mono, and select the input you want for that particular track. The mono ones say [01M], [02M], etc. If you want to record a stereo track, then select the Stereo option where the inputs are paired and say [01S] et seq. This would have input 1 as left, input 2 as right.
    If you can't see all of the inputs available, try selecting the ASIO driver in Hardware Setup...

  • Few problems/questions! (cover flow, album art...etc)

    Ok I finally added my songs to my new IPOD (replaced my old one) and this is my first Ipod with video, color...etc. Its the IPOD Classic 80 GIG.
    Well I am having a few problems/questions:
    ---Why when I hit "Get album art" does it ONLY get art for my videos? It doesn't get any for all 1,500+ songs! Is it because they aren't downloaded from Itunes? If so then why does it do it for the movies then? They aren't from ITunes either!
    ---With Cover Flow I updated the Album Art myself and have about 700 songs with art now. But I have two problems.
    1. It won't display all 700 songs under Cover Flow!
    2. It won't show them in order by song name! Can I change that?!? If not then how is it showing them by? What do I need to change?
    ---Are there any other video types supported besides that on Mpeg4 and that other weird type? If not why not? Its a pain to have to convert everything. Its almost not worth having this video IPOD if you have to go through sop much effort just to watch 1 stupid video. I mean I spent more money on extra programs now for music and videos then I did on the IPOD almost.
    ---Is there any way to transfer your music from one IPOD to another? I know some people say you can't but why? What about people like me who have music ripped from our own cds and NOTHING from ITunes? Its a REAL pain having to rerip all the cds, put them back on, rename all the songs, fix all the info...etc. Its taken me 4 days now. Apple needs to think about a "IPOD TO IPOD" music transfer kinda program.
    ---How do you get pics on the IPOD without having to keep them on your PC? I notice it has to SYNC them every time I have it plugged into the PC! But if I tell it NOT to sync pics anymore then they won't stay on the IPOD if turn that option off and unplug the IPOD. Theres got to be another way to add them.

    Assassin X wrote:
    ---With Cover Flow I updated the Album Art myself and have about 700 songs with art now. But I have two problems.
    1. It won't display all 700 songs under Cover Flow!
    2. It won't show them in order by song name! Can I change that?!? If not then how is it showing them by? What do I need to change?
    Cover flow on the ipod can only be done (as far as I know) on Album by Artist Name. On iTunes you can change it around
    Assassin X wrote:
    ---Are there any other video types supported besides that on Mpeg4 and that other weird type? If not why not? Its a pain to have to convert everything. Its almost not worth having this video IPOD if you have to go through sop much effort just to watch 1 stupid video. I mean I spent more money on extra programs now for music and videos then I did on the IPOD almost.
    Try using freeware, heres an excellent video converter for iPods:
    http://www.videora.com/en-us/Converter/iPod/

  • A few simple questions from a new Iphone user

    Hi a few simple questions, just got an iphone 2g - 2nd hand so not really sure what to expect. Anyway I guess my first question is about mine sometimes being a little slow - when I look at contacts and sometimes when sending a txt it slows down/freezes a little - normal?
    Secondly Edge - I havent used it much but when I have its been painfully slow, is this normal - is it always really slow - cause I had read despite not being 3g Edge was actually pretty fast - what exactly is data roaming by the way? I mean I have been switched off as basically I dont wanna use the internet till next month when they change my contract to one I get unlimited access on - is that right?
    Im having a problems syncing videos to it - it just wont sync some but will others and Im not sure why - theyre same file type and they used to sync to my ipod touch but now they wont for some reason
    Cheers

    I have the origina iPhone.
    Downloaded 2.0, synced phone with everything UNchecked. Installed 2.0. Synced with all the options checked to reload my data. The iPhone has been great. Noticed a little lag when I opened contacts. Installed the new upgrade, and everything is back, no lag.
    Edge is Edge and nothing more. It is slow compared to a strong 3g signal. But is liveable most of the time. Heavy traffic can slow it down to barely usable.
    My four wheel drive club has a web site with a large photo section. I was standing out in the middle of parking lot in San Jose, Ca and showing a friend some photos. It opens up a page of small picts to choose from. Select a print and it enlarges, He was amazed at how fast they appeard. Especially given the quantity of photos.

  • Few basic questions about database administration

    Hello,
    I have a few basic questions about database administration.
    1. I switched one of my oracle instances to archivelog mode. I just cannot locate the archive log files on my windows system. The %ora_home%/ora92/database/archive directory is desperately empty...
    2.What is the tools01.dbf datafile used for?
    3.What is the undotbso1.dbf datafile used for?
    Thanks in advance,
    Julien.

    1. The archive log location needs to be specified in your init.ora file. By default, Oracle will place the archive files in either ORACLE_HOME/dbs or ORACLE_HOME/database.
    2. The tools01.dbf file belongs to the tools tablespace which should be set as the default tablespace for system. It primary purpose is to hold Oracle Forms and Reports database objects, however, it should also be used for holding other non sys database objects such as the perfstat (statspack) or other third party database schemas e.g. quests sqllab.
    3. undotbs01.dbf file belongs to the undo tablespace.

  • I have a old firefox account and I cannot sign on too. I made new account just to ask a question. I tried to sign in with old emails, but did not get any reset information back. How can I recover old information?

    I have a old firefox account and I cannot sign on too. I made new account just to ask a question. I tried to sign in with old emails, but did not get any reset information back. How can I recover old information?

    Backing up and restoring your Profile should have included your bookmarks.
    https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
    That looks like a JSON bookmarks backup file, from 11-01-2012. Did you try '''restoring''' that file?
    https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them#w_using-a-bookmark-backup-file
    Never messed with JSON files other than viewing them on a few occasions out of curiosity. There are no line breaks which make them very difficult to read.
    As far as working with that file in {like} NotePad goes:
    A. use Find / Search for each indecent of a '''"uri"''' string, then "copy and paste" the uri into another text file, and then move on to the next "uri" string.
    B. use a text program where a filter can be set for the "uri" field in the JSON file for a line break or to "scrape out" the "uri"s only for display or export to a list of uri's.
    Or try using an online JSON editor like this, to try to display only the "uri" field.
    https://www.jsoneditoronline.org/

Maybe you are looking for