Just a little reassurance..DSL modem Internet LED does not light

After installing a WRT54GL between my computer and a Speedstream 5100 ADSL modem, everything seems to work, except that now only three of the normal four LEDs are illuminated on the modem.
The normal four are: Power, Ethernet, DSL, and Internet. After installing the router, only the first three LEDs now stay illuminated. But, I am not denied internet or email (Windows Vista). Does this seem normal?

After installing the router if the Internet light on router is blinking…it shows the incoming & outgoing data….so blinking of internet light is proper connection from modem to router.

Similar Messages

Broken screen (LED does not light up) help

ok..
so i have a macbook 13.3 white.. im pretty good with computers/etc..
So i turn on my macbook and the screen is dark.. but surely the macbook is on.. you can see the screen under bright light shined on the screen.
But the screen does not light up.
So i checked- my brightness settings.. then set power settings to normal.. set it to sleep and woke it up. NOPE.
I bought a new screen and installed it properly. NOPE same thing.
I bought a new power 'inverter'.. NOPE same thing
I bought a LVDS cord (chord connecting screen to the logicboard). NO same thing!
So at this point im real close to throwing it as far as i could from the side of the Golden Gate Bridge =/. but i refuse to.
I KNOW THERE IS A SOLUTION AND SOMEONE OUT THERE TO KNOW!
please help, and thank you much.

HalosGhost wrote:
Inxsible wrote:please use code tags when pasting code snippets.
Definitely follow this advice. Makes life much easier. As for the code itself, first be aware that you can't just "sh" it. It runs using arguments, so you'd run something like
# ./enlighten increase keyboard
Though I wrote that script for zsh, I believe it should be compatible with bash without issue. Below is a much simpler version of the script which will only increase or decrease the keyboard backlights:
#!/bin/bash
#<- Configuration ->
kbd=/sys/class/leds/toshiba::illumination/brightness
kstep=15
self="$(basename $0)"
#<- Error Handling ->
E_HELP=44
E_PERMS=45
#<- Function Declarations ->
permissions () {
if [ "$UID" != 0 ]; then
echo "$self must be run with root privileges"
exit "$E_PERMS"
fi
usage () {
echo "Usage: $self [-h|--help] <increase|decrease>"
exit "$E_HELP"
update-kbd () {
permissions
sudo tee "$kbd" <<< "$new"
exit 0
#<- Run Contents ->
case "$1" in
-h|--help)
usage
increase)
current="$(<"$kbd")"
new="$(( current + kstep ))"
update-kbd
decrease)
current="$(<"$kbd")"
new="$(( current - kstep ))"
update-kbd
usage
esac
Assuming you have the correct file being pointed to, you should be able to just run (assuming you keep it named "enlighten")
# ./enlighten increase
Let me know how that works for you.
All the best,
-HG
Ok so i copied that script, and tried to run "./enlighten increase" but it said i needed to be sudo, so i did it with sudo, and it said "sudo: ./enlighten: command not found"
Then i just did 'sh enlighten increase" And this time it gave me:
enlighten: line 29: `update-kbd': not a valid identifier
I have no idea what that would mean.
When i google "`update-kbd': not a valid identifier" all it comes up with is my topic lmfao. Not much help there.
~The Dyzaster

Pavilion DV6 1311el power supply ok, power led does not light up

I own a dv6 notebook model 1311el that works just fine with a charged battery but it wont accept charge from the charger. The led next to the power jack does not light up, i have removed the power button bezel and keyboard and then i used a multimeter to measure the voltage between the wires of the power jack cord and there were 19.5 and 15 volts as it should... I am sure that the power supply works because i gave it to a friend of mine which has the same hp model.

Hello Nessuno,
I see your AC adapter is not charging your HP Pavilion dv6-1311el Entertainment Notebook, your battery indicator LED is not lit. I would like you to start here, this will help you determine if it is the battery or the power supply: Battery Does not Power Notebook or Hold a Charge.
A battery that does not charge might be the result of a power adapter failure, a system board failure, or a battery failure. Please perform the steps listed in the troubleshooting document in order to diagnose the failure.
I hope this is helpful.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Satellite L650-12Z: Led does not light up when connected to power source

My L650 does not show the white light anymore when the cable is plugged in.
The connectors are clean, and the adapter is working.
The laptop does still run on the battery ( when there was still power in it).
Also without the battery, there is no white light indicating that the laptop is connected to the DC.
Does anyone know what the problem could be and how to solve it?

Thanks for your reply.
Unfortunately the battery does not charge when connected.
Only when connected with the full battery it is working.
I have measured the adapter with my multimeter and it seems to be working properly.
Like you said, letting a technician look at it would be a smart idea.
I decided to send it to a service center in my city, in about 4 weeks I would have the notebook back they said.
Weird thing for me still is, that around three weeks ago the same happened. Windows said the power was not connected. But after plugging the power in and out a few times it worked again. Maybe this is a symptom of something?

I have just bought a new imac over the internet. it does not work. which store do I return it to?

I have just bought a new imac over the internet. it does not start up which store can I return it to?

jimoefrompymble wrote:
I have just bought a new imac over the internet. ...
If Purchased from Apple... Contact AppleCare... you have 90 days Free Telephone Support... 3 years if you Purchased the AppleCare Protection Plan.

I have an ipad 2, ios7 will not download. I keep getting an error message that just tells me ios wont install, however it does not tell me why. Any suggestions? Thanks

I have an ipad 2, ios7 will not download. I keep getting an error message that just tells me ios wont install, however it does not tell me why. Any suggestions? Thanks

I find the Air easier to work with if I need a keyboard if, for no other reason, that's more compact to carry around than the iPad and a keyboard, even one that is part of an iPad case. I also often have to access data from one application when using another, and iOS is not at its best when having to do rapid application switching (Command-Tab switching is a lot faster than the double press home, scroll the icons at the bottom and swap).
As well, for editing I find the lack of sandboxing on OSX allows for efficiency enhancing utilities across applications, something you don't get in iOS. I understand the reason for that, but while more secure it also creates issues of its own in terms of usability in a number of situations.
I prefer the iPad for totally single application focused situations where little or no input is required. I use my iPad to hold copies of manuals when I'm doing a full day continuing education presentation for CPAs. A MacBook Aire can't really fill in very easily for that usage.
I see them each as tools appropriate for different jobs.

I just installed Yosemite. iPhoto is gone, and Photos does not open. Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US. What do I do? Cannot access any photos.

I just installed Yosemite. iPhoto is gone, and Photos does not open. Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US. What do I do? Cannot access any photos.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

HT1459 Just bought a new ipod shuffle for my kid and cannot set it up because it does not show up in itunes. Also the charging light does not light up. what could be wrong, as i am able to see both my iphone and ipad on itunes on the same pc?

Just bought a new 4th gen iPod Shuffle for my kid. Problem is I cannot do the initial set up, as the device does not show up on iTunes on my PC. Also the charging does not light up. Any ideas on what could be wrong, as I am able to see both my iphone and iPad on iTunes using the same PC?

I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.

HT1386 Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. J

Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>

Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?

Just upgraded to latest iOS and my iPad does not come back up. It displays a line to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else.

Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

Hi pgrillo,
I'm sorry that you're disappointed with your ExportPDF subscription. I checked your account, and see that the order is still processing. As such, I'm unable to cancel it for you myself. However, a Customer Care agent can take care of your cancelation/refund quickly. Here is the contact information: Contact Customer Care. Click Still Need Help? Contact Us at the bottom of the page to find both phone and chat support options.
Best,
Sara

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of official documents? There is usually plenty of white space at the top. Center command does not seem to help.

You cannot change pdf files in Reader. You can set it to print with a shrink to fit option.

I just downloaded and installed Adobe Reader X. It does not print. It is unbelievable to me!

I just downloaded and installed Adobe Reader X. It does not send the view to the installed printers.
It is unbelievable to me that Adobe would broadcast a flawed product like this.
ljc

BRIAN; THANK THE LORD FOR GOOD PEOPLE LIKE YOU THAT HELP OTHERS. ADOBE PHOTOSHOP TECH SUPPORT IS THE WORST TECH SUPPORT I HAVE EVER SEEN. I CALLED THEM AND 2 TIMES I TALKED TO INDIA OR WHEREVER, AND COULD NOT UNDERSTAND THEM. THE THIRD CALL I WAS TALKING TO A GUY AND WAS DISCONNECTED. I TRIED TO CONTACT TECH SUPPORT ON THE NET AND THAT WAS NOTHING BUT A PROBLEM AND COULD NOT GET MY MESSAGE THROUGH. I CALLED ANOTHER # AND THEY WANTED TO CHARGE ME. THAT'S BAD. I JUST PURCHASED THE ELEMENTS 13 AND THERE IS 0 TECH SUPPORT. THANKS AGAIN BRIAN. """DINO"""

Why in my FP-TC-120 Module, the red leds are not lighting

The red indicator leds are not lighting, even if there its no TC conected, what could it happent the software works fine but the leds still turn off

The red LED's indicate Open Thermocouple detection. However, each channel can be configured for either thermocouple (temperature) or voltage measurements. If a channel is configured for one of the voltage ranges (+/-25, +/-50, +/-100, -20 to +80 mV), Open Thermocouple does not apply so the LED's are deactivated. Use the NI-FieldPoint software to make sure that your channels are in one of the temperature modes and not in voltage mode.
Regards,
Aaron

I have just redeemed an iTunes card, but my balance does not change

I have just redeemed an iTunes card, but my balance does not change to $15.00, but instead changes to $00.01 cant figure it out, did i waste money????

And you didn't owe iTunes anything or have pre-orders ? If you can't find where the money went then try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Just a little reassurance..DSL modem Internet LED does not light

Similar Messages

Maybe you are looking for