Just a noobie question...

Hello everyone. I am rather new to Weblogic, so there is still a lot of learning out there for me to do. I have a rather simple question which I am sure someone should be able to answer.
When looking inside of a JNDI tree, I see the purple ball means bound objects. Does red mean unbound or something else. Does anyone have a link for me that I could read to see how to understand the JNDI tree a little bit more.
Thanks.

One project, multiple sequences.

Similar Messages

  • Syncing & Streaming from the same Library? - Noob question

    Good Evening - I have a silly noob question that I can't believe I can't find the answer to on my own: I have been trying to determine if it is possible to sync and stream from the same library simultaneously.
    I purchased the 40GB aTV and it has been syncing just fine with my Windows iTunes. I told it not to sync a few albums I never listen to so I wouldn't have issues with other songs or movies. I am upgrading to a new iMac and I am am going to re-rip many of my existing CD's to get them into a consistent audio quality of 192 AAC or above. This is going to push my library size to well over the 40GB limit in just music, not including any movies or TV shows I choose to pull in.
    The manual does not make it obvious (or I am not reading clearly) what happens to items that don't sync over - I assume they are still playable but will have to stream. Is there anyway to mark "preferred" albums or artists that should get synced and not streamed in case the iTunes library is unavailable for whatever reason?
    Also, when I change libraries is the aTV going to completely re-sync even though the music is must going to be migrated?
    Thanks for taking the time to answer these silly questions.

    That's not quite what I was looking for.
    My question remains, what happens to the items that can't be synced from my main library to my aTV? My library is just a smidge bigger than the available space on the aTV and not everything syncs over. Does that mean I won't be able to play those items not synced from my main library...
    As my library grows I don't want to have to choose what does and doesn't get synced from my library by mood. For example, every year my wife buys new christmas music - right now I could exclude it and everything else gets copied over, but come thanksgiving that stuff better be there for her and I don't want to choose other music or movies to remove.
    I guess I will just have to play to try it out.

  • Noob questions...windows emulation on mac OS 10.4

    getting my ibook later this week and was wondering about windows emulation. i don't have an intel processor in my ibook (obviously), so what's your recommendation for a product that runs windows on a mac? and, total noob question, do i have to buy a copy of windows? i already have windows on my dell laptop.
    thanks in advance for your help.

    Hello,
    so, do the new macbooks have some kind of software
    pre-installed that runs windows? my friends who just
    got a macbook tells me he can run windows programs if
    he needs to.
    The MacBooks have Intel processors in them. So, no emulation is necessary. They can directly install and run Windows if they want.
    The reason you need a program like Virtual PC on an iBook is because it uses a PowerPC processor which Windows cannot communicate with. And, the PowerPC Mac's architecture is completely different.
    So, that means you need a program like Virtual PC to completely emulate an entire PC computer. Basically, it is a program that simulates a real computer and then translates those Intel instructions into PowerPC instructions that your iBook can understand.
    There is a severe performance penalty for all this translation. The iBook G4 will not perform like a regular Windows PC. It will be much slower, and you will need to be more patient. With a G4 iBook, you could reasonably expect your performance to be comparable to a 300 MHz PC running Windows XP.
    With a 1.8 GHz iMac G5 and 2 GB of RAM, I was experiencing performance comparable to a 1.3 GHz Intel Celeron system with 256 MB of RAM (which I happened to have around for comparison).
    But, for more intensive tasks, the performance was more comparable to a 500 MHz system.
    Anyway, back to the Intel Macs. Those machine's only need a free Apple Utility "Boot Camp" to provide the drivers and create a Windows compatible boot partition:
    http://www.apple.com/bootcamp/
    And, then they need Windows XP Home or Pro. That's it.
    With programs like Parallels, they can run Windows inside the Mac OS (or along side it) much like you would with Virtual PC:
    http://www.parallels.com/en/products/workstation/mac/
    i am trying to figure out where this might be useful
    in the first place.
    It is useful if you need to be able to run Windows software, but don't want to buy a PC. It's more convenient to have one machine that can do everything than it is to have a Mac and a separate PC.
    Feel free to ask additional questions if you have them. Or, if you like, hit solved on the post if you feel everything is answered.
    But, do let me know if I can answer any additional questions or need to re-state something clearer.

  • Noob Question: Flowing Input Dataset Row/Record IDs Through to the Score Model Output

    I've got a noob question that I'm having difficulty finding the answer to:  if my input dataset contains row/record IDs and I want to flow these through to the Score Model module output but *don't* want to include this column in model training (because
    it's just an arbitrary row tag), how do I go about accomplishing this?  
    I am able to Project Columns and eliminate the IDs entirely early in the process but then can't really determine which input row a prediction is associated with because I've lost the IDs.  I'm not quite sure how to accomplish what I'm trying to do via
    the Metadata Editor, either.
    Surely somebody else has dealt with this same question.  If the solution is implemented somewhere in a Gallery experiment that you'd like to point me at, too, that would also be just as good as a written explanation.
    Thanks in advance,
    Kevin

    Hey Kevin!
    Sorry for making this process unclear :( Azure ML has a notion of Feature Columns
    (by default everything is a Feature), that is columns/variables that are intended to be treated as part of the observation vector. You can use the Metadata Editor
    and (after selecting the column(s) you want), mark the column as
    Fields -> Clear Feature. This will have the semantics you desire - data attached to the input data while not being used for training.
    Regards,
    AK

  • Noob Question Re: Encoding to DVD

    This is my first post in the adobe forums , so hello all!
    I've been trolling this, and numerous other sites, hoping to understand the basic process of editing -> CD creation.
    So here it begins...I am working on "work-out" video tape. The footage was shot using a Canon H10 to removable memory card. All files are .MTS, which don't pose too many challenges for my computer (i7 processor w/ 6MB memory) after the most recent PP update. Editing, adding AE, titles, graphics, or using Sound Booth is relatively painless. I have a total of (4) timelines that comprise the total video (Trailer, Intro, Instructions, and Workout). As I edited the video I'd often render what I had testing formats such as avi, MPEG2, FLV/4, Blu-Ray H.264, etc. I was amazed with the clarity and sharpness as I stayed with in the confines of 1980x1020. So I have no problems there. Once the editing, I first created a blank timeline and pulled into it the other timelines to make on timeline called "Video Complete". I dynamic linked that timeline to Encore and found out that amount of data, in that format, created a very unstable Encore - it screamed and hollered about running out of memory, etc. I watched several tutorials and found that dynamic linking the indvidual timelines gave me a much more stable Encore.
    So I had the untranscoded .MTS files in Encore. I created my menu, linking the timelines, etc and built my project using the standard 720x480 (I believe) format. To say the least, I wasn't at all happy with the final product when watched on the television. Very pixalated/jagged around letters, etc.
    I don't mind shopping around for the correct answer or putting my time in on research, I'd just like to know if I am on the right playing field and/or headed in the right direction.
    So basically my questions are:
    1) Is dynamic linking .MTS files to Encore the correct approach as opposed to rendering the .MTS files in PPro to avi or MPEG2 before bringing them into the Encore project? (Based on wanting the best DVD quality possible)
    2) Transcoding settings for individual timelines should remain on automatic or should I adjust them and transcode before clicking on build project?
    3) Since I was able to see MPGE2 renderings (from PPro) on my computer screen as sharp and clear, should I expect the same quality from a DVD product?
    Any information would be helpful - thanks so much.
    Joe

    Re: Noob Question Re: Encoding to DVD
    Hi, great questions:
    I think this is a sound approach. MTS is short for MPEG-2 Transport Stream, so it's already MPEG-2 but will of course have to be re-transcoded for DVD to standard definition. If you want to experiment with high definition, you could try stripping the streams out of the MTS using a third party tool such as what you might find at videohelp.com - or not. Less transcoding is always better, but may not be practical. There's probably little advantage to doing this on the DVD side, but it might be worthwhile for Blu-ray? Or not.
    First, try using Interpret Footage on the asset (the MTS file itself) - set it to SD Widescreen. You may need to Revert to Original if it's already transcoded. Try building another DVD and check the footage.
    For the most part, yes. Of course, they will be standard definition on DVD.
    Message was edited by: jbowden
    Jbowden,
    Thanks for the response. I will check out "Interpret Footage" on the asset of the MTS file and toggle to SD Widescreen. Will do that tonight so I can compare the two for quality.
    Joe

  • 2 noob questions about speaker settin

    . What if I don't sync the Creative speaker settings with windows control panel speaker settings?
    2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
    Thanks.
    Message Edited by jermin on 06-24-2008 02:09 PM

    Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
    I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
    First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
    Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

  • SSD and HDD? Noob questions

    Hi, I've just purchased a reconditioned Thinkpad W540, spec is Lenovo ThinkPad W540 16GB, 256GB SSD, i7-4800MQ 2.7Ghz, 20BHS1DJ00. Noob question, because I've not owned a SSD before, can I install a normal hard drive as well? There are 1TB external drives going for around $70. I've just noticed these hard drive caddys - should I be using one of these? Are all HDD SATA II or III these days? Could I use this drive :  http://www.ebay.co.uk/itm/1TB-HDD-HARD-DRIVE-FOR-LENOVO-THINKPAD-W540-Quad-Core-L430-L440-L540-S540-/321439122240?_trksid=p2141725.m3641.l6368 With this caddy: http://www.ebay.co.uk/itm/Nimitz-2nd-SATA-HDD-Caddy-for-Lenovo-Thinkpad-T440p-T540p-W540-/121509644281?hash=item1c4a8a07f9 Second question - what is the recommendation regarding installing software. Should I put it all on the SSD or on the new hard drive? I'll be using the Adobe suite so there's the whole scratch disks issue to get my head around. Thirdly, how do I prove my copy of Windows 8 is genuine and is there a backup of it sitting on my harddrive somewhere? I didn't receive a W8 disk. Thanks in advance for your help.

    1) SATA versions are cross-compatible with each other, so you should be fine regardless of which SATA it is.
    HDDs are also standard parts and aren't tied to a specific system. You can use anything that's 9.5mm thick and 2.5" diagonal. (Excluding WD VelociRaptors.)
    The caddy should work fine. Functionally, they're just a glorified cable. Third-party caddies may have a different fit and finish from the rest of the chassis, though.
    2) Depending on how much software you have, you'll want to choose the ones you use often and put those on the SSD. Ideally, none of the software you want to use while on battery should be on the HDD (avoids the HDD spinning up, thus draining battery).
    As for Adobe and it's scratch disks, I'd provision a bit of the faster SSD at the risk of wearing it out sooner. The speed helps especially if your workload is heavy. Ideally, you would have enough RAM to never need to page to scratch disks.
    3) The Windows 8 key is sitting in the BIOS. The installer should pick it up automatically.

  • Z68A-GD80-G3 - installing radeon 6990 graphics card - noob question

    all, apologies for the noob question, but: how exactly do i install a radeon 6990 graphics card?
    i have a Enermax ERV1250EGT power supply. the card is in the top blue pcie slot. i have connected the PCI-E 2.0 6+2 (8)Pin connectors (see http://www.enermax.co.uk/revolution85 - connectors tab, sorry no direct link but they are the red ones to be seen in the the bottom left corner of the picture: http://www.hardwareheaven.com/reviewimages/enermax_revolution_1250w/thumbs/10.jpg, i.e. 6 pin + 2 pin = 8 pin).
    the card will just not start, i.e. when i boot the pc nothing happens. it works fine without and works fine with my old graphics card (gtx 260).
    pics of the asus radeon 6990 here:
    http://www.techpowerup.com/reviews/ASUS/Radeon_HD_6990/images/power.jpg
    any ideas? is there anything different to this card than with other cards? have installed systems over the past 10 years and never had an issue until now.

    Quote from: shell20110309 on 22-November-11, 17:35:16
    :lol_anim:Featuring 4GB of high-speed GDDR5 memory, the AMD Radeon™ HD 6990 is the definitive solution for ultra-high resolution gaming across up to six simultaneous displays.1
    May I know the purpose of this post?

  • Just a technical question

    Hi,
    I'm not a developer but I wanted to ask here since I presume there're a lot more tech savvy people that could possibly give me a proper answer to just one small question regarding behavior of Mac OS X using the following example: at some moment I suddenly discovered that the Trackpad option which allows for search through the English Dictionary (Thesaurus, etc) tapping a highlighted word with three fingers no longer worked as before: when I tapped nothing happened or other word was "processed" in what seemed to me to be a chaotic order. I reset PRAM and its normal functioning returned. What exactly happened with the system that it started act incorrectly until the PRAM reset? I remember though that some days ago (before I discovered the issue) I did one more SMC and PRAM reset and performing the latter I released the combination of keys after the third chime. I then thought that it was too much so I repeated the operation exactly as recommended. Could the repetitive reset of PRAM be the reason and kind of shock to the OS?
    Would be happy to hear your opinions
    Have a nice day   

    Are you sure you haven;t turn it off in System Preferences->TrackPad;Point & Click?
    There it is called Lookup

  • Whenever I ask Siri a question it just links me to a website instead of just saying the answer.  The reason I ask Siri is because i am not in a position to look at my phone.  How can I get Siri to just answer my questions??

    Whenever I ask Siri a question it just links me to a website instead of just saying the answer.  The reason I ask Siri is because i am not in a position to look at my phone.  How can I get Siri to just answer my questions??

    I found that the only time Siri will read anything to you is if it finds a Wikipedia article. Siri will let you know it found that, and ask if you want it to be read out loud. Other than that you will hear the "I found this, take a look".
    The only other thing you can do is activate "Speak Screen". It will involve you taking a look at your phone for a moment, selecting what you'd like to look at, but Siri will read the content to you. It's in Settings > General > Accessibility.  Once activated, all you have to do is slide two fingers from the top of the screen and you will have it read to you. I use it all the time because of my astigmatism. It's pretty useful.

  • Another Noobie question - readLine()

    Hi all
    This is another one of the extreme noob questions. I wrote a small program to read form a text file
        String NetworkLine = new String();
        try{
            FileReader inputFile = new FileReader("Test.txt");  //
            BufferedReader in = new BufferedReader(inputFile);
           try{
               while (in.readLine() != null){
                NetworkLine = in.readLine();
                System.out.println(NetworkLine);
           }catch (IOException e){
                System.err.println("Error in reading the file");
        }catch (FileNotFoundException e){
            e.printStackTrace();
        }My Test.txt is
    One
    Two
    Three
    Four
    Five
    Six
    without the *
    The output I get is
    Two
    Four
    Six
    I cannot figure out why only even no. lines are being read. I inserted a breakpoint at the line
              System.out.println(NetworkLine);This shows me that only even no. lines are being read by readLine(). Any help will be appreaciated.
    Thanks
    Ayesha

        String NetworkLine = new String();
        try{
            FileReader inputFile = new FileReader("Test.txt");  //
            BufferedReader in = new BufferedReader(inputFile);
           try{
               while (in.readLine() != null){  // <-- This reads a line, checks it for null ,and drops it
                NetworkLine = in.readLine(); // <-- this reads the next line
                System.out.println(NetworkLine);
           }catch (IOException e){
                System.err.println("Error in reading the file");
        }catch (FileNotFoundException e){
            e.printStackTrace();
        }So the upshot is that you print every other line.
    Corrected:
        String networkLine = new String();
        try{
            FileReader inputFile = new FileReader("Test.txt");  //
            BufferedReader in = new BufferedReader(inputFile);
           try{
               while ((networkLine = in.readLine()) != null){
                System.out.println(networkLine);
           }catch (IOException e){
                System.err.println("Error in reading the file");
        }catch (FileNotFoundException e){
            e.printStackTrace();
        }

  • Hello there i just have 1 question, i have forgotten my security answers to the questions? what can i do? cause i just bought a new ipad and it wont let me access itunes without those 2 answers? please help

    hello there i just have 1 question, i have forgotten my security answers to the login questions how do i reset/change these, so atm i cannot get into the itunes store on my new ipad2?

    Hi sjs1983! You can get support for your Apple ID here:
    http://www.apple.com/support/appleid/

  • Openbox noob question on menus.

    I really do apologize about this insanely noob question but this is driving me up a wall.
    I've read several several different resources on openbox (particularly trying to find information on the root menu)
    i'm either looking in the wrong place - or I totally saw it and didn't put 2 and 2 together. *shrugs*
    so, here is the dealio -
    I'm trying to edit the root menu (or as I like to call it right clicky drop down thingy)
    I'm running LXDE and from everything I've gathered over the last couple of days trying to tackle this
    with lxde you edit the lxde-rc.xml instead of the menu or rc.xml
    although after reading through it a plethora of times I noticed that it pulls off of the menu.xml as well...
    *basically*
    Which file do I actually edit to add stuff to the root menu?
    and i've seen dozens of actual templates for editing the menu.xml and lxde-rc.xml but whenever *I* try to follow that I get a syntax error on openbox --reconfigure
    and insight or even a swift kick in the ass that will land me on a site that has info that actually works would be ever so appreciated (even if its a search term - I think my problem now is that i've spent so much time looking for this one thing that I might actually be insanely over complicating this and not picking out the right information   )

    stlarch wrote:An easy way is to install obmenu
    I can agree with that even though I'm not sure how to use that program very well. I'd rather learn how to manually edit the stuff, and not have to rely on another program
    the main reason I got away from ubuntu was to be semi/forced to learn everything.
    JackH79 wrote:Have you read this here as well?
    I did glance at that but didn't think that was referring to the root menus...I can decifer through the xml those menu files to some extent...the stuff on freedesktop is straight crypic to me atm...but at least now I know I need to take a much closer look hehe.

  • Just a quick question regards my mobo..

    I might possibly bricked my motherboard which I already ask a while back,, just a quick question,,, Now I did hooked up the powersupply to the motherboard alone,,, no other components,,, just the PSU and motherboard,,, then I use a paperclip to put static force on the motherboard's power button ( where powercables on the case should suppose to be in ),,, now the motherboard just keeps on blinking as my problem b4,, so its really the motherboard right??? I just want to confirm that the motherboard is the problem and no other components... thnks

    It is finally enough n2th2n. Don't open tons of threads for the same issue. For your board issue use your original thread: forum-en.msi.com/index.php?topic=184002
    Consider this a final warning.

  • Noob question use dng converter or let LR convert to dng

    Sorry for the noob question but I'm transitioning over to LR from aperture and I believe DNG is  a good move for me.  Now then, is there any advantage to using the converter over letting LR do it?

    It really is the same integrated tool, yes. All the same preferences are there.
    The only thing I am not aware if Lightroom can do is Extract Embedded Originals. But that's not something I'd ever do to my own RAW files.
    Cheers

Maybe you are looking for